Core Image Cards for Powermac G4 Dual MDD FW800

Hello there Gentlemen, currently running my Dual G4 with a ATI Pro Radeon 9000. This card does NOT Support Core Image. i need however ADC for
my flat panel from Apple 20". So what are my choices to get a card
that does core image and will drive my Cinema display?
cheers
sir double null

Hey null,
looks like we have close to the same machine. I have the 9000 card in my machine also and recently purchased the ATI 9800 which is supposed to be a great card. Unfortunately, it isn't working for me yet. I don't know if the problem is just my computer or something else. I have an open thread just two below yours:
http://discussions.apple.com/thread.jspa?threadID=264933&tstart=0
Here's the link for graphics cards that support core image..
http://docs.info.apple.com/article.html?artnum=301347
I don't see the 9800 listed in this list? But I could have sworn it was on the list a couple months ago, at least the 9800 was in order to run Motion. It's so completely frustrating.
Post back if you get a video card working and what it is.

Similar Messages

  • Video card upgrade for powermac g5 dual core

    will the NVIDIA GeForce 7300 GT Graphics Upgrade Kit for Mac Pro work with a PowerMac G5 Dual Core?

    Unfortunately, no. Although both cards are PCI-Express the difference in the card's ROM (the G5 card needs an Open Firmware compatible ROM, whereas the Mac Pro needs an EFI compatible ROM) make them incompatible.
    Assuming you currently have the nVidia GeForce 6600, you could upgrade to either the nVidia 7800GT (was originally a build-to-order option) or ATi's X1900GT. Both are available from OWC and are very similar in speed to each other. Both are considerably faster than the 6600.

  • Airport card for Powermac G5?

    Hi I have a Powermac G5 dual 2.0 ghz & looking to add wireless airport card.
    I have seen this sort of thing on eBay http://cgi.ebay.co.uk/Airport-PCI-WiFi-Wireless-Card-Apple-Power-Mac-G3-G4-G5-/4 00149847039?pt=UKComputing_Apple_Mac_Accessories&hash=item5d2aca1bff#ht_1545wt752
    I don't want to spend a lot & wondered if this will do the job?
    Thanks

    Nickmeister wrote:
    Hi I have a Powermac G5 dual 2.0 ghz & looking to add wireless airport card.
    Look, whats the bit with using PCI, when the PowerMac G5 is already setup for aninternal Airport card? Just look for the card holder and the antenna wire - they're towards the front of the case on the Logic board. If they're there, all you'll need is the small card and the "T" type WiFi antenna to plug in the back. see this EBay sale: http://cgi.ebay.com/Airport-Card-and-Antenna-Powermac-G5-/230520457064?pt=LHDefaultDomain_0&hash=item35ac170768#ht_500wt994

  • Which video card for Aperture and dual monitors?

    I have a G5 dual 2.0 with a GeForce FX 5200 video card that is driving one 23" Cinema display. I need to upgrade my card per the specs to run Aperture. I have also been thinking of getting a second 23" display. Can someone recommend the best video card for me. I know very little about video cards and have been reading a lot this morning. Thanks,
    Dave

    Hi Dave;
    No. PCIx and PCIe or PCI Express are not the same thing.
    PCIx is an extended or slight sped up version of PCI. While PCIe is a switched bus structure instead.
    Hence they are not the same. That is what all of the big news is about Apple has made the leap over to PCI Express.
    Allan

  • Trying to find a new Graphics card for G4 Quicksilver Dual 1 ghtz

    Hello All,
    I am looking to upgrade my video card for gaming purposes. I have been doing research and thought I had found a card I could use. Then I researched more, and confused myself. There comes a point when one must ask
    So I have the Geforce 4 MX right now and want to upgrade. At first I read that the ATI 3850 AGP would be a nice card to use, though I don't think it will work in my machine. I then came across the ATI 2600 XT. I also see that the 9800 pro is good. Then I hear about flashing....help?
    So my questions are:
    What is the best card that I can put in my trusty ole G4 Quicksilver?
    A rough price range perhaps? Would I need to add a fan, or is the fan that comes on the graphics card sufficient?
    Should I look solely at flashed cards, and if so would I flash it myself or buy one that is flashed already?
    I am looking at spending no more than $200 on a card, is that a good amount for a card? It seems like it it isn't the top, but will do pretty good at buying a decent card.
    I really appreciate these forums, and have read quite a bit here. But once I start researching I soon find myself reading about other interesting things (since there is so much great information here) and 2 hours later I remember why I came here in the first place.
    Thanks in advance,
    Etin
    Specs:
    G4 Quicksilver Dual 1ghtz
    1.5 GB ram
    AGP
    Apple Cinema Display
    (let me know if you need more information)

    Ok, no answers huh?
    Well, I purchased a ATI 9800 Pro Mac Edition.
    *_A warning_*, if you have an Apple Cinema Display check the connection type. If it is an older display, you probably have a ADC connection. The newer models have a DVI connection. Make sure the video card has that type of connection on it or you will have to buy a ADC to DVI converter from Apple. This costs $99.00.
    When purchasing a video card keep this in mind and add this to the price you will be paying to use the video card.
    Thanks for the wonderful help.
    Etin the almost PC user!

  • UNRESPONSIVE NVidia 6800 card and Powermac G5 Dual 2.5 (2004)

    I just purchased a NVidia GeForce 6800 Ultra card for my 2.5 dual G5 (which is a model from 2004). I need the card b/c I've been doing a lot of work in Motion. I bought the card on EBAY and it came in a beautiful Apple box -- barely used and verified to be working.
    I installed it and it didn't work, even though my G5 meets all the specs. The card is properly installed (its fan is whirring up a storm), but my 2 Samsung monitors don't activate. (Everything of course works fine with my standard-issue Radeon 9600). I'm on 10.410
    A few notes:
    -An AppleCare specialist claimed that my G5 is too old for this card -- even though the card says it works with even First Gen G5's. (I believe mine is 2nd Gen)
    -When I try starting up with the Nvidia, I hear a high-pitch sound -- almost like speaker feedback. I saw this on someone else's post with another graphic card issue
    -The Graphic Card Installer CD's would not install drivers on my system. Said something about my harrdrive not accepting these drivers
    -Another post mentioned how a Logitech wireless keyboard driver can mess up graphic extensions -- which makes no sense to me (I am using a Logitech wireless keyboard.
    Any thoughts out there. MUCH MUCH appreciated.

    I actually did what Roland suggested and got mine to work. The only problem has been when I run World of Warcraft I now get a Kernel Panic. I have been using the computer without updating anything in osx, currently running osx 10.4.0
    I am going to do the cumulative update to see if it behaves better. Is there anyway I can find out if the card is running in AGP x8? This is the card info I get on the system profiler:
    Chipset Model: GeForce 6800 GT
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 256 MB
    Vendor: nVIDIA (0x10de)
    Device ID: 0x0045
    Revision ID: 0x00a1
    ROM Revision: 2121m
    This card is different. It says its a 6800GT DDL, but its not the original Åpple made one, its one that says GeForece XFS on the fan...
    What do you guys think?
    Gilbert

  • Which Airport card for my G5 Dual 2.5GHz?

    hello--I need to add an Airport card to my G5 Dual 2.5GHz, but it's not clear which model to get as some G5s aren't compatible with the card I've seen sold everywhere. My machine specs are:
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (3.0)
    Bus Speed: 1.25GHz
    Boot ROM Version: 5.1.8f7
    TIA.

    Hi, and a Warm Welcome to the Power Mac G5 Forum!
    Presuming this is your G5
    http://www.everymac.com/systems/apple/powermacg5/stats/powermac_g5_2.5dp.html
    the Airport Extreme! card is this one.
    The installation instructions are here
    http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
    The "Late 2005" dual-core G5s use a combined Bluetooth/Airport Extreme! module - but all the other G5s use the card above.
    Please post again if you have any questions. Good Luck.

  • Which WiFi card for: PowerMac G5 Tower, 1.8 Ghz DP, running OS 10.5.8?

    Sorry, I couldn't find an answer to this on the forum and the PDFs ref where the card WOULD fit didn't resemble the inside of the Mac I have
    It's an ex-work machine that I'd like to make Wifi for a non-techie friend (already have DLink router for existing PC etc) Which wireless card do I need and which is better? I've been told about USB dongles, Airport Extreme and PCI antenna cards. All very confusing. Basically it needs to be reliable for the non-techie owner , so am not keen to get a cheapo card that will need lots of setting up. Plug 'n' play would be good.
    I think the Mac is 2004 vintage and is definitely G5, 1.8 Ghz Dual Processor. Any help asap would be appreciated as I've got to get a card and install it all by the weekend.
    Many thanks,
    Andy

    Hi Andrew, Not sure which card, but it may be easier or even cheaper with some of these alternatives...
    http://eshop.macsales.com/item/Edimax/EW7728IN/
    http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/
    http://eshop.macsales.com/item/Newer%20Technology/MXP802GU2/
    http://eshop.macsales.com/item/Asus/WL167G/
    I havent tried the first one, but the other 3 work better than any Airport card I have.

  • Which graphics card for a G5 Dual 2.7

    Hi. I've got a Dual G5 2.7GHz and I'm thinking about upgrading the graphics card. Problem is, I'm not sure which cards will work and how much improvement they will give me. I currently use two 20" cinema displays so the new card will need 2 DVI out ports, or some way of connecting 2 DVI monitors. Currently my G5 has an NVIDIA 9650 card in it which came with the machine. I mainly need extra graphical grunt for games and sims. Can anyone give me some advice as to an upgrade path please ?
    Thanks.

    The ATI Radeon X800 XT - Mac Edition is probably your best bang for the buck. It has one DVI and one ADC connector so you'll need the ADC to DVI adapter to drive two DVI monitors.
    You can find it at the Apple store.

  • Ethernet Card for PowerMac 5500/225

    I've an old PowerMac still gathering dust and since I'm connected to a DSL line with a wireless router I thought I'd take advantage of the 4 wired Ethernet ports at the back and wire my Mac up to the Net (you know, the old fasioned way with some Cat 5).
    This will mean bypassing the old dial-up modem (built in) by installing an Ethernet card. I imagine these now cost pennies, and can be bought on eBay, but which make and model will work best (or work at all)?
    Thanks in advance for any help that's forthcoming...
    PowerMac 5500/225 Mac OS 8.6 or Earlier System 8.0

    Many of the 5500s shipped with a Comm II slot RJ-45 Ethernet card in the leftmost (from the operator position) position [that's rightmost if you have good access to look directly at the backpanel.]
    Alas, some of them did not. If you want to install one there, you will need a Comm II slot (not to be confused with a Comm slot) Ethernet card. They are readily available from used Mac dealers, and can be had on eBay for under US$20.
    If and only if you already have the right-angle PCI slot adapter board in place, you can also use a PCI slot card, but beware -- many of the manufacturers are either no longer in business, or cannot supply Mac drivers. So if you buy a Brand other than Apple, be sure you are getting the Drivers with the card.

  • 3rd party pci wireless card for G4 1.25GHz (MDD 2003) & Leopard?

    Greetings. Upgrade to Leopard broke wireless on my son's PowerMac G4 1.25GHz (MDD 2003). Previous PCI wireless G card was a third party distributed by Buffalo, but it worked fine under Tiger. Does anyone have a recommendation on a third party card known to work with 10.5.x?
    Thanks!
    gary2400

    I am using a Belkin F5D7000 in a AGP G4 Tower. The chipset is by Ralink. Free OS X version drivers are available here:
    http://www.ralinktech.com/supp-1.htm
    While not as elegant as Airport software, of course, the driver and card work excellent.
    If you can find a wireless PCI card using the original Broadcom chip sets, just like the Airport card, then it will be recognized as an Airport card and use the Apple software. These are hard to find now however.
    Here is an excellent article on what you are trying to do:
    http://homepage.mac.com/techedgeezine/2005_0217-54g-inyourmac1.htm

  • Sound Card for PowerMAC G4?

    I bought my MAC from my school librbry when they upgraded all the computers to G5's and iMAC's and when i got my G4, the system was pretty bare. I really want to upgrade it and use it as my main computer. I cant find a sound card compatable with it though. As of now there isnt even a headphone jack on it, all my sound comes from the one speaker on the case. So if anyone knows of a soundcard for the system i would really appreciate it if you could let me know what kind i need to get. also if you know a video card that works with my MAC, i need one of those still too.

    The Audiophile Card is nice for music work, but it does require massaging with the drivers. I would not recommend it if you are looking for something plug and play.
    M-Audio's Revolution 5.1 is for folks who want surround sound, and their Delta cards are even higher-end musician cards.
    HTH,
    ~FifthWheel

  • Any Open GL 2.0 cards for PowerMac G5?

    Are there any OpenGL 2.0 compliant cards available for the Power Mac G5's AGP slot?

    After Effects CS3 (AE 8.0) has OpenGL support disabled on the Mac. That might explain why you're being told your card doesn't support OpenGL.
    Reportedly, there's an AE 8.0.1 update available only through the Adobe Updater program that re-enables OpenGL on AE CS3 for us Mac users.

  • Where (and what) to get airport card for PM 1.0 GHz FW800?

    I dont know if I should be getting the airport card or the airport extreme, and even if I knew, I have no idea where is reliable. I've seen it on amazon.com for $42 new w/o box, and one unopened for $60 on craigslist(there are pictures, Im pretty sure its legit). Does anyone know where is reliable(and preferably cheap)?
    Thanks!

    Hi! It's not an option your machine will only be able to use an airport extreme card. A regular one won't work. As for the site I've never bought anything from them and as with most internet sites it's a gamble. If you are worried then buying one purported to be as "new" on eBay with a seller with 99-100% ratings is probably a safe bet. Tom

  • Graphics Card for G5 Dual 2 (June 2004)

    I was going to buy an x800 XT card for my G5 Dual 2, but I heard that it has been discontinued. What are the best options for this Mac?

    search hi and lo as this is your best (cost effectiveness) option ... there is a quadro (??) from nvidia, but it is uber expensive ...
    there are several on ebay right now
    Here
    PMG5 Dual 2.0 4GB RAM - X800XT Dual 23" Cinema Displays   Mac OS X (10.4.8)   PBG4 12" 1.5 1.25GB RAM

Maybe you are looking for

  • Is there a way to sync address books?

    I have the address book for our company on a server. I would like to synchronise the address books in both directions. Is this possible? Any tips as to how to do this? Any ideas or suggestions? Thanks

  • C2D not as bright as CD

    I Got a c2d as a replacement for my old CD. Anyone else notice a difference in the display brightness of the C2D as opposed to the CD

  • Oracle.DataAccess.Client.OracleDataAdapter.Update not working

    Hi I am using the Oracle.DataAccess.Client.OracleDataAdapter from Oracle.DataAccess runtime version v4.0.30319. I set the SelectCommand and retrieve data from Oracle without any problems using the adapter to fill a datatable. I then use the DataTable

  • How should convert text file into XML file?

    I do a project "WEB SERVER LOG ANALYZER" using JSP. For that i copy the content of log file into the other file . how i convert it into XML file . xplain with coding

  • Is UniqueID form property really unique on all system forms?

    Hi all, We have an AddOn that controls matrix line changes on several system forms (Purchase, Sales, etc) to allow us detect article price changes made by user on matrix lines. The control that we have implemented is based on the assumption that the