Core Image Question New ATI 9800 in QS 2x1ghz

I just installed a Radeon 9800 Mac Edition (128MB) in my Quicksilver 2002 Dual 1ghz w/ 1.5 GB RAM running Leopard.
I downloaded and installed the latest version of ATI Displays (4.5.7).
In System Profiler, under Core Image, it says, "Hardware Accelerated" instead of "Supported" like I expected it to say.
I do have two CRT monitors connected to the card, but it says the same thing if I only have the main connected.
Profiler says this:
ATI Radeon 9800 Pro:
Chipset Model: ATY,R350
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4e48
Revision ID: 0x0000
ROM Revision: 113-A0750A-201
Displays:
VGA Display:
Resolution: 1024 x 768 @ 75 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
CPD-G420S:
Resolution: 1152 x 870 @ 75 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Should I be concerned about this? Is there a way to change it to "Supported"? Is there something obvious I'm missing?
Thanks!

When I installed Leopard on my Quicksilver I noticed the wording went from Supported to Hardware Accelerated for my Radeon 9600.
From what I've read about Core Image in the past, if a programmable GPU isn't available, AltiVec may be used. The following link contains some additional information:
http://arstechnica.com/reviews/os/macosx-10-4.ars/15
I'm wondering if the wording has been changed to reflect whether it's performed by the GPU or not. It would be interesting to see what's shown for graphics cards that don't support Core Image.

Similar Messages

Core Image Question

In System Profiler, it says Core Image: Hardware Accelerated.
Could someone enlighten me as to the difference between "Hardware Accelerated" and "Supported"?

UMRebel,
"Supported" means that the graphics card (or chip) is able to display images generated via Core Image. "Hardware Accelerated" means that the card is able to actually execute the Core Image instructions, taking that much load off the CPU.
Scott

ATI 9800 - 128mb vs 256mb - speed?

I've come full cycle after discovering the ATI 9600 does not physically fit in my G4 AGP sawtooth because I have now learned that I have an AGP 2x slot. The 9600 is only for 4x and 8x.
So now my choices are between the 128mb card or the 256mb card.
There is of course a difference in price and I'm wondering if there is a siginificant difference in speed and is it worth the money? I'm putting the card in to satisfy Motion's requirements.
I'm running dual 19" Apple Studio Monitors. Does the card split the memory for each monitor?
Ken

ken,
i put the new ati 9800 256 meg card in my ancient 2002 quicksilver. it works, i can get some good things done in motion but it's not splitting the wind by any stretch of the imagination. learn the workarounds like previewing in 1/3 resolution and it's not bad. it can get snail slow depending upon your project.
you will find that if you boot up using only one monitor, the card will devote all the vram to motion and it'll be a little snappier, otherwise it'll split the vram between two monitors. i use two monitors as well but have gotten used to using motion on one monitor.
this card will increase the noise level of your machine a lot. also, i had a card where the fan was failing and was sounding like a bleating cow upon startup. contacted ati, sent the thing back and it was promptly replaced. ati customer service was great.
good luck.

Will the new Mini do Core Image?

I am waiting for the Mini upgrade. There already has been a silent upgrade where these Minis don't have CoreImage compliant graphics cards - which is ridiculous.
So, in the end when there's the official upgrade. Will the new Minis be able to do Core Image?

Sorry, but no one outside of Apple knows anything about future product releases. Anything anyone here would post would be pure speculation which isn't allowed here (the Discussions are for technical support on existing products). There are a number of rumor sites which you can read, but as to whether any rumors they report have any validity, your guess will be as good as ours.
As to the currently shipping Mac mini that reportedly has some minor feature bumps, it apparently still has the Radeon 9200 and so still will not support Core Image.

Zen Kernel and new ati radeon oss driver

Hey together!
A few days ago I get new ati-driver from testing and since then, I can't start the xserver with the zen kernel and ums. I can use the normal kernel 2.6.33 normally.
Here is my Xorg log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux linux-laptop 2.6.33-ZEN #1 ZEN SMP PREEMPT Fri Mar 5 13:29:19 CET 2010 i686
Kernel command line: root=/dev/disk/by-uuid/5394d0b7-4952-4f87-87bc-a4762f73b8c4 ro quiet
Build Date: 18 March 2010 07:32:34PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:12:54 2010
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:5653:144d:e003 ATI Technologies Inc Radeon Mobility X700 (PCIE) rev 0, Mem @ 0xd0000000/134217728, 0xc0100000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
CEDAR
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) [KMS] drm report modesetting isn't supported.
(WW) Falling back to old probe method for vesa
(II) RADEON(0): TOTO SAYS 00000000c0100000
(II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X700 (M26) (PCIE)" (ChipID = 0x5653)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x144d SubsystemID: 0x5653
IOBaseAddress: 0x3000
Filename:
BIOS Bootup Message:
M26-P Samsung M26 Firenze ATOMBIOS BR14537/rel9.10.1.0/CL199610
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 358000
(II) RADEON(0): Default Memory Clock: 345000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 500000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 200000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.32.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=7 min=20000 max=50000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68900
HBlank: 128, HOverPlus: 21, HSyncWidth: 32
VBlank: 16, VOverPlus: 4, VSyncWidth: 4
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): TMDS PLL from BIOS: 16500 b0112
(II) RADEON(0): Skipping Component Video
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVDS
DDC reg: 0x1a808
(II) RADEON(0): Port2:
XRANDR name: DVI-0
Connector: DVI-D
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x809f7db]
1: /usr/bin/X (0x8048000+0x54715) [0x809c715]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0x7785e40c]
3: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x83208) [0x772a9208]
4: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x3790c) [0x7725d90c]
5: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x3988b) [0x7725f88b]
6: /usr/bin/X (InitOutput+0x5c8) [0x80ab048]
7: /usr/bin/X (0x8048000+0x1a550) [0x8062550]
8: /lib/libc.so.6 (__libc_start_main+0xe6) [0x7747db86]
9: /usr/bin/X (0x8048000+0x1a2f1) [0x80622f1]
Segmentation fault at address 0x7734f808
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Can anyone help me? Thanks!

When I install an old xf86-video-ati package from 27.02.2010, everything works. So the problem seems to be the new ati-driver.

GeForce 8800 Core Image issues finally worked out?

Getting ready to order a new Mac Pro, and deciding between the Radeon 2600 and GeForce 8800 I have been reading that for games the 8800 is smoking fast - but for normal work in Aperture/etc it's actuall slower than the Radeon. Also saw some people reporting issues playing back HD video on the 8800...
Have these issues finally been worked out? Is the 8800 working well for HD video, moving windows around without stuttering, core image, etc...??
Thanks in advance for the replies...

I'm quite sure the 8800 will do well as a gaming card under windows. But if you use the computer mainly for CS3, Aperture etc, then I think you should go for the cheaper 2600 and then upgrade.
Barefeats has recently tested the ATi 4870x2 and the GTS280 under Vista and the former is significantly stronger. http://www.barefeats.com/harper19.html.
Note that in that article it is said that ATi "has optimized their Mac Edition drivers and firmware for the Radeon 2600 XT and 3870 so that they run Core Image effects much faster than comparable nVidia cards including the GeForce 8800 GT and Quadro FX 5600." This was news to me but perhaps it answers your question in part at least.
I have not seen any solutions for the HD video playback issue. I'm using the 8800 but don't do HD so I have no personal experience of that.
Btw note Barefeats finding that a 2,8 Mac Pro is as strong as a 3,2 Mac Pro for graphics work.
/p
Message was edited by: pullman

Core Image Cards for Powermac G4 Dual MDD FW800

Hello there Gentlemen, currently running my Dual G4 with a ATI Pro Radeon 9000. This card does NOT Support Core Image. i need however ADC for
my flat panel from Apple 20". So what are my choices to get a card
that does core image and will drive my Cinema display?
cheers
sir double null

Hey null,
looks like we have close to the same machine. I have the 9000 card in my machine also and recently purchased the ATI 9800 which is supposed to be a great card. Unfortunately, it isn't working for me yet. I don't know if the problem is just my computer or something else. I have an open thread just two below yours:
http://discussions.apple.com/thread.jspa?threadID=264933&tstart=0
Here's the link for graphics cards that support core image..
http://docs.info.apple.com/article.html?artnum=301347
I don't see the 9800 listed in this list? But I could have sworn it was on the list a couple months ago, at least the 9800 was in order to run Motion. It's so completely frustrating.
Post back if you get a video card working and what it is.

Leopard, can it run without core image?

well i got an ibook g4 from my friend and i bought leopard disk new from ebay it was boxed and all well anyways i want to install leopard on my ibook which is running 10.4.11
the specs are
1.7 ghz
786 ram
60 gb hard drive
my question is that i think that the ibook doesnt support Core image, can i install it on the ibook cuz im thinking of doing a clean install since its neww any thoughts??

Requirements for OS X 10.5
http://support.apple.com/kb/HT3759?viewlocale=en_US

Core Image: Not Supported??? Quartz Extreme: Not Supported???

Hello! I'm new to this forum and I'm a Mac noob. I have a problem. For some reason my computer is saying Core Image and Quartz Extreme are not supported.
ATI Mobility Radeon 9700:
Chipset Model: ATY,RV360M11
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x4e50
Revision ID: 0x0000
ROM Revision: 113-xxxxx-134
Displays:
Color LCD:
Display Type: LCD
Resolution: 1440 x 900
Depth: 32-bit Color
Built-In: Yes
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
Display:
Status: No display connected
Is there a way to fix this? Please tell there's a way. I wanna see all those nice transition effects when using VirtueDesktops or Desktop Manager
Thanks!

Hi Leek Mibles;
May I welcome you to the Apple Discussion Forums.
The reason your system is telling you it can do Core Image is because it doesn't have the hardware to support it. Since your system is a PowerBook, you are unable to upgade the graphic card because it is soldered in. So I am sorry to say that the only way for you to get Core Image is to upgrade your whole system.
Allan

What is a "Core Image-capable video card" ?

Roxio Toast 10 Titanium Pro recommends in its System requirements that a core image-capable video card be used. I don’t know what this means, nor do I know whether my iMac has this video card.
I checked the System Profiler for my aging 2005 iMacG5 PPC and under Hardware / Graphics/Displays, my iMac has an ATI Radeon X600 XT. Under the Displays description, there is a “Core Image: Hardware Accelerated” feature. I don’t know how important the recommended video card is, nor whether my existing card would meet Roxio’s recommended system requirements.
I picked the Final Cut Express HD Forum to post this question; if there is a better Forum, please advise.
I want to purchase this Roxio software so that I can burn Blu-Ray discs of 1080i video footage downloaded from my Canon Vixia HV30 into Final Cut Express 3.5. After video editing in FCE, I want to export into Toast 10 because iDVD will not produce hi-def DVD’s.
I’m sure there are some experts out there who know whether my video card is sufficient for what I want to do, and may have other comments/suggestions about my hardware and its ability to work with Toast 10 and meet Blu-Ray objectives.
Thanks in Advance
BoBo

Alchroma,
Thank You for responding to my question; that was a very good reference.
I think I'll be OK with my old iMacG5PPC to handle the requirements of Toast 10 BluRay.
BoBo

NEO2-FIS2R ATI 9800 AIW Pro TV Tuner causes freezes/blue screens. Help!

I recently upgraded my system from P4 2.4Ghz to P4 3.4Ghz Northwood and went from All in Wonder Radeon to 9800 AIW Pro. Only other change worth mentioning is I created a 0+1 RAID using 4 hard drives which were previously configured differently. I watch a lot of TV while I work on the computer. I do a lot of disk writes and data management which ultimately creates a lot of transfering of data between disks. Never was a problem in the old config. BTW, I also use an external HD conntected through USB for data transfers as well.
Immediately, my system went from stable to unstable. I first noticed that the destop redraw on bootup was slower. Then I noticed that the TV had a delayed response on changing channels and changing volume. Switching to another window causes a slow redraw and sometimes causes a jerk in the TV display like a hickup. Other symptoms include blue screens but no driver is referenced. The blue screen otherwise is a normal STOP screen except for the bottom quarter of the monitor which looks like video garble. Sometimes it just reboots. Sometimes, it freezes. I noticed that doing disk transfers while watching TV usually speeds up the behavior. Comparatively, my use of the TV in the old config was transparent regarless of how much I taxed the system.
Anyway, in view of the unexpected behavior, I decided to backup and reinstall the OS from scratch using a vanilla install method. Everything was detected properly, OS installed fine. Installed ATI's latest Catalyst drivers. I turn on the TV and within about 15 minutes of use, the erratic behavior begins. I figured it was a bad card so I exchanged it out. Same thing with the new card. ATI is shrugging their shoulders and pointing at MSI.
I ran hardware tests, updated the MB BIOS to latest available. Tested all four hard drives/RAM. I can't find any hardware issues. I'm very conservative with my BIOS settings so aside from the default values, I have only changed the settings required to allow for a 0+1 RAID config on the Promise controller.
I put my old ATI Radeon back in and ran the TV for hours and had no problems at all. I also swapped my old 2.4 back in with the 9800 AIW Pro and the problem is recreated so that is what has me ruling out the processor.
Here's what the box looks like inside.
Antec 480 True Blue
MSI NEO2-FIS2R (w/latest BIOS)
1GB Corsair VS512MB400 x 2
4 Maxtor 160GB hard drives, 8MB Cache, 2ea SATA, 2ea PATA
Intel 3.4Ghz Northwood CPU, 512KB, 800FSB w/Zalman 7700CU HS/F
ATI 9800 AIW Pro 128MB DDR
Front/Rear 120mm Case Fans
Optical drive, floppy drive, modem card, sound card.
NOTE: All USB ports are being used by devices with their own power supply except for a web camera. All fans are using power from PSU. No fans use MB power.
I also checked to insure that the AGP card was seated correctly and verified that it was. So, I'm pretty bummed out that I just dropped circa $500 on improving my system but I can't even get it work as well as it used to.
I think I have found the problem but short of getting rid of the 9800 AIW Pro, I am hoping that someone else has had this problem and can help me out. Your ideas would be greatly appreciated!!!

Good News!!
While the DDR voltage was set to 2.7, I recreated the conditions in which the failures tended to occur. Within minutes, it was obvious that something had changed as I had never gone that far without getting kicked out, freezing up, or blue screening. Since this is looking more and more like a power issue, I decided to leave all of my external USB connections disconnected except for the external hard drive because I normally transfer data back and forth frequently from it.
When I saw that the system was holding up well, I connected the rest of the USB connections. Everything ran OK for a few minutes but then the sound from the TV dropped out while the picture continued to function. Although, this marked another failure, it was a marked improvement over what had been happening previously.
NovJoe suggested tweaking the voltage to 2.7 ~ 2.8 so I upped the voltage to 2.8 and setup the same environment and the machine has run that way for about 3 hours. That one increment seems to have made a difference.
Questions which come to mind.
1. If this is a power issue, is it the motherboard's inability to supply the correct voltage to the motherboard components or is it a PSU issue which isn't providing the motherboard enough juice to do its job or a combination of both?
2. If this issue can be corrected through tweaking voltages, how do you know how far to go before damaging system components?
One of the original symptoms with the TV is still apparent. Upon changing channels, there is a second delay before the sound and picture synchronize. Changing foreground windows also causes a "hickup" in the TV's sound/video. I'm more concerned with what this behavior may mean from a system performance standpoint rather than the annoyance since this is a 9800 AIW Pro and it should be snappy instead of sluggish.
Up the AGP voltage? On that subject, the people here seem to have a lot of background with tweaking the BIOS. I'd appreciate any other ideas in tweaking this system as well.
Ultimately, I have to answer the question of whether I need to get a bigger PSU or can I safely correct my system performance by using BIOS tweaks?
Thanks again for all your help.

Dual G4, MDD: Cheapest Core Image graphics card?

I have read some of the comments about graphics cards on various threads, but what I'm after is the cheapest card which supports Core Image and will run on my dual G4 MDD.
Any suggestions?
Thanks!
William

William Donelson wrote:
Thanks, Allen.
Is that really the cheapest at $180 ?
Well that's the cheapest card retail card currently available on the market. The other retail card available is the ATI Radeon 9800.
If you don't go retail, then your choices divide basically between:
1. OEM Apple cards that can work unmodified in an MDD
2. OEM Apple cards that can be modified to work
3. Flashed/modified PC cards
I'll take them in turn.
*1. OEM Apple cards that can work unmodified in an MDD*
I think the only OEM card that supports Core Image specifically designed for the MDD is BTO (build-to-order) ATI Radeon 9700. It wasn't available for long as an option, is rare, and is pretty price.
*2. OEM Apple cards that can be modified to work*
These are typically 8x AGP cards for the G5 that can be modified fairly easily (if you don't need to drive an ADC monitor) to work in the MDD. The cards I've seen people try this with are the ATI 96x0 OEM Apple cards: 9600 Pro, 9600 XT. I think the 9650 may work as well, but I haven't read anything.
The modification to work (without ADC power) can be done easily with tape. See here. The ADC port works (provide video signal) with DVI and VGA monitors (with the appropriate inpensive adapters). It's just that to use the ADC port with an ADC monitor (to supply) power the modification is more involved -- see the above linked page.
For awhile OWC sold the 9600 Pro pre-modified. That used to be the cheapest route to Core Image with an OEM Apple card. I use an 9600 Pro, but didn't get it from OWC.
You can at times find these OEM 96x0 on eBAY both modified and unmodified for an MDD. If you want an OEM card make sure it's OEM -- they have DVI plus ADC, with the ADC being the dead-giveaway.
*3. Flashed/modified PC cards*
Some people do this themselves, some people do it and sell them eBay. Some sellers are better than others, some cards are better than others. Some modify the cards with bigger ROM chips because the Apple ROM are typically bigger than the typical PC cards. If they don't swap the chip, they may be using a hacked smaller ROM.
For Cubes, this route sometimes is the easiest, and coolest way to go.

Confused over ATI 9800 Pro

I know this is somewhat off topic for this forum but I didn't know where else to post this question. I want to upgrade my woefully inadequate FX5200 to an ATI 9800 Pro but need dual monitor support (non gaming). I know the 9800 Pro has both a VGA connector and DVI connector but their HydroVision software is required to make a dual monitor setup work correctly. ATI's web site for Hydravision support(http://ati.com/companyinfo/glossary/hydravision/products.html) does not show support for any 9000 series ATI card. Does anyone here know if Hydravision is supported for this card?

If memory serves, the two cards are identical in hardware, the only difference being the bios. Thus, you can turn a pro into an XT with relative ease. Let me note that I have not done this, so I don't speak from specific experience.
That said, you might want to hold out for the new nvidia card if you'll be able to afford it. The reviews of the Geforce 6800 ultra show it to be close to 100% faster than current high end chips. You're reading that right--it's close to twice as fast as anything on the market right now. After seeing those numbers, I had to spend an hour crawling around on the ground trying to find my eyes.

ATI 9800 Pro Mac SE - Screen Artifacts and Anomalies

Hello All,
I was lucky enough to be given a new video card this Christmas (ATI 9800 Pro Mac Special Edition). Unfortunatly I am having some serious issues.
When I frst installed the card in my G5 all seemed well, both my displays appeared to be working properly and I did not notice any problems. The next day I decided to update the ROM on the card to the latest offered by ATI; after doing this I began to notice some horrible screen artifacts and tearing.
Examples:
http://static.flickr.com/39/77612780675feadba0o.jpg
http://static.flickr.com/42/7761277964b07c6811o.jpg
As you can tell from the screenshots above this is not normal.
Here are some details of my Powermac:
Dual 2.0G5 w/ 3.5 GB of RAM
Running 10.4.3
Displays:
23" Apple (plastic) Cinema Display connected via ADC
17" Sony connected via DVI
And the ATI card:
Chipset Model: ATY,R350
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x4e48
Revision ID: 0x0000
ROM Revision: 113-A14402-126
I have attempted to downgrade the firmware on the card to the previous ROM offered by ATI; no luck.
I have taken the normal troubleshooting procedures:
- Repair permissions
- Clean caches
- Repair Disk
- Reseat video card
- Install a fresh copy of Tiger on a seperate drive
- Install different versions of ATI's software (currently using the most up to date)
- Remove ATI's software
- Boot into safemode
- Run one display at a time (first ADC then DVI)
It seems ATI support is out till 12/30; does anyone have any advice?
Thanks for all your help....
-Chris
Dual 2.0 G5 w/3.5GB RAM Mac OS X (10.4.3)

Hey, Chris...
Chipset Model: ATY,R350
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x4e48
Revision ID: 0x0000
ROM Revision: 113-A14402-126
I purchased this card on ebay as a new, unused Apple factory unit, which doesn't require the molex power drop from the superdrive. I've got a 20" aluminum cinema display and a 17" clear CRT studio display connected. My main problem is that I get random app freezing (mostly Safari, sometimes Preview, and occasionally Mail). I can browse with Firefox all day and not have a problem. Console shows nothing unusual, either.
Symptoms: cursor present and movable, but unable to click on anything, Dock icons don't display their names upon rollover, perpetual beachball in frontmost app, high-pitched screech coming from machine somewhere (unless 'Napping' is turned off in CHUD processor pref pane, then normal).
Until this evening, I was under the impression that these were freezes that required a hard restart - I had waited several hours for the symptoms to clear to no avail. Tonight I decided to try something: I pressed the power button on the 20" display, and then pressed the 'S' key to sleep the system (even though I got no feedback on screen). I waited a few seconds and then left the room for a minute or two, and when I came back, the machine was sleeping. I woke it up and found horrible corruption, which corrected itself after another sleep cycle.
I was actually preparing for an archive & install to see if maybe different drivers would be installed that alleviate the issue, but wasn't too hopeful.
Bizarre...
Now I'm not sure what to do. I haven't been able to use Safari for several weeks due to this. I had thought that since it only seems to happen with Apple apps, that maybe it was a core OS thing that 3rd party apps weren't affected by.
Dual 2 GHz G5 (Late 2003) Mac OS X (10.4.6) 1.5 GB RAM, 9800 Pro SE 256MB (OE replacement for original 9600 Pro 64MB)

Core Image?

Hey, I've recently switched to mac after being disappointed with my old pc. So far it's been great and I'm thoroughly happy. I'm interested in graphics and use Photoshop, Image Ready and iPhoto. So to increase my graphics options I decided to use Core Imgage that I have heard and read about, however, a Spotlight search shows that I don't have it. So I'm wondering does Core Image come with 10.4.7? Or has something gone pear-shaped and for some reason i don't have it for whatever reason. If so, is there a place I can download it, as I've not seen anything on the Apple site.
Thanks for any replies.
-baz

Mac OS X 10.4: Requirements for Quartz Extreme and Core Image graphics
If you're wondering what the video requirements are for Quartz Extreme and Core Image in Mac OS X 10.4 Tiger, find out in this informative document.
Note: Quartz Extreme and Core Image are impressive video enhancements in Tiger that appear on fast Macs. But even if you have an older computer that can't use Quartz Extreme or Core Image, it can still run Tiger if it meets the system requirements. If you have a third-party video card installed, contact the card manufacturer to determine if it is Tiger-compatible.
Quartz Extreme
Some appealing graphics effects, such as the "rotating cube" effect you see when using Fast User Switching to switch users, are powered by Quartz Extreme. Quartz Extreme uses OpenGL and a supported graphics card to reduce the number of onscreen calculations being performed by the CPU. To take advantage of Quartz Extreme, you need one of the following graphics cards:
ATI: Any AGP-based ATI RADEON GPU, with 16 MB VRAM or better.
NVIDIA: NVIDIA GeForce2 MX or later, with 16 MB VRAM or better.
Core Image
Other graphics effects and optimizations in Tiger, such as the ripple effect that shows when you place a widget on Dashboard, are driven by Core Image. When a programmable GPU is present, Core Image uses the graphics card for image processing operations, freeing the CPU for other tasks. To take advantage of Core Image, you need one of the following graphics cards:
ATI Mobility Radeon 9700
ATI Radeon 9550, 9650, 9600, 9600 XT, 9800 XT, X800 XT
nVidia GeForce FX Go 5200
nVidia GeForce FX 5200 Ultra
nVidia GeForce 6800 Ultra DDL, 6800 GT DDL
If you have a different card, contact the manufacturer for Core Image compatibility information.
Verifying compatibility with System Profiler
With Mac OS X 10.4, you can use System Profiler to make sure your computer's GPU supports Quartz Extreme or Core Image.
Open System Profiler (it's in /Applications/Utilities, or, if started from the Tiger install disc, open it from the Utilities menu).
Click "Graphics/Displays" under Contents.
In the right pane under "Display," look for the Quartz Extreme and Core Image lines; next to each, you will see either "Supported" or "Not Supported."
Important: Information about products not manufactured by Apple is provided for information purposes only, and does not constitute Apple's recommendation or endorsement. Please contact the vendor for additional information.

Core Image Question New ATI 9800 in QS 2x1ghz

Similar Messages

Maybe you are looking for