Core shutdown can not be heat related

I did some tests today, using my MBA 1.6 on an external monitor and running Second Life (tm) and even with the temperature below 60C I had a second core shutdown. After I quit SL (tm) the second core came back again almost immediately. Second Life (tm) is very CPU/GPU intensy.
And I saw this post today, maybe was already posted here, and I apologize if so.
Also using XP on boot camp, I did not have a core shutdown.
My MBA is one month old.
P.S. Safari with 5 Youtube videos open, 15 minutes each, no core shutdown.
http://forums.macrumors.com/showthread.php?t=495007&mode=linear

Dear Marcus,
Thanks for the reply. My idea was exactly that, try to demonstrate that the second core shutdown maybe not hardware related and, yes, software related. The example I gave was Second Life ™, since the link I posted already talked on another application, WOW. I tried to be as more proactive as possible, since, I do not believed, as some threads I saw here, that Apple will be irresponsible to put on the market a 2K “laptop” with a basic hardware design flaw.
As you said, that can be a big relief to MBA users, since a hardware flaw can be more difficult to correct, as a software issue.
If someone is interested to follow the same path , please, look on the link on my first post.

Similar Messages

Can not change anything relating to users

I am running OS X Mavericks server. When I try to go into the "Users" pane to add a user, the buttons on the bottom left are completely greyed out. Also, when I try to edit an existing user, all of the fields are greyed out. I looked into my Admin user account, which is the one I logged into Server with, but "Administer this server" is unchecked. When I try to recheck it and press OK, it tells me that "Operation could not be completed because the current credentials do not have the appropriate privileges." Furthermore, all of my network users can not access any of their services, but my local admin user works fine.
Is there any way to fix this?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

After new update we can not keep the "related links" off the screen. We uncheck it but it still keeps coming back.

Every time we start Firefox, the "related links" are on the screen. We uncheck the box and it goes away. But the next time we use it, the related links are back. I cannot see why we would have to reset this every time we use the program. It is not a serious thing but surely is aggravating.

You can also do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

My imac(2.8 ghz core i5) can not connect a wifi. It's always show connection timeout.

Before i found this problem my imac is in sleep mode. when i finish my lunch i come back and see a black screen come from top of screen and more language is show.In english it is written that I want to restart my mac i must press power button. After i restart my mac. I have a problem about wifi. but lan it's ok. and my iphone can connect to wifi normally.

Interval Since Last Panic Report: 192943 sec
Panics Since Last Report:          1
Anonymous UUID:                    9431E442-7F42-4AF3-A5E8-869E231E6E77
Sat Oct 15 09:57:29 2011
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x00550759, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x0c44602b, CR3: 0x00100000, CR4: 0x00000668
EAX: 0x0c445f27, EBX: 0x08e10040, ECX: 0x0000053d, EDX: 0x08388c80
CR2: 0x0c44602b, EBP: 0x575e3f28, ESI: 0x0bf6a1c0, EDI: 0x08388620
EFL: 0x00010202, EIP: 0x00550759, CS: 0x00000008, DS: 0x0bf60010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x575e3d28 : 0x21b837 (0x5dd7fc 0x575e3d5c 0x223ce1 0x0)
0x575e3d78 : 0x2abf6a (0x59e3d0 0x550759 0xe 0x59e59a)
0x575e3e58 : 0x2a1a78 (0x575e3e70 0xb0e4080 0x575e3f28 0x550759)
0x575e3e68 : 0x550759 (0xe 0x20048 0x8e10010 0x10)
0x575e3f28 : 0x542585 (0x8388620 0x8d75a00 0x575e3f5c 0x516766)
0x575e3f78 : 0x5443d5 (0x8d75a00 0x0 0x575e3fac 0x1)
0x575e3fc8 : 0x2a179c (0x9e617c0 0x0 0x10 0x8b55064)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: iMac11,3 (Mac-F2238BAE)
System uptime in nanoseconds: 8056835665285
unloaded kexts:
com.apple.driver.AppleUSBUHCI          4.2.0 (addr 0x11c9000, size 0x65536) - last unloaded 137415862470
loaded kexts:
com.apple.driver.AppleBluetoothMultitouch          54.3
com.apple.filesystems.msdosfs          1.6.3
com.apple.driver.AGPM          100.12.31
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AudioAUUC          1.57
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.driver.AppleMikeyDriver          2.0.5f14
com.apple.driver.AppleHDA          2.0.5f14
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.kext.ATIFramebuffer          6.3.6
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AirPort.Atheros21          425.14.7
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleLPC          1.5.1
com.apple.driver.AppleBacklight          170.0.46
com.apple.ATIRadeonX3000          6.3.6
com.apple.driver.AppleIRController          303.8
com.apple.driver.AppleUSBCardReader          2.6.1
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AppleUSBHub          4.2.4
com.apple.iokit.AppleBCM5701Ethernet          3.0.5b8
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.12
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.AppleBluetoothHIDKeyboard          141.5 - last loaded 54964210724
com.apple.driver.AppleHIDKeyboard          141.5
com.apple.driver.IOBluetoothHIDDriver          2.4.5f3
com.apple.driver.AppleMultitouchDriver          207.11
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.DspFuncLib          2.0.5f14
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleSMC          3.1.0d5
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.1
com.apple.iokit.IONDRVSupport          2.2
com.apple.kext.ATI5000Controller          6.3.6
com.apple.kext.ATISupport          6.3.6
com.apple.driver.AppleHDAController          2.0.5f14
com.apple.iokit.IOGraphicsFamily          2.2
com.apple.iokit.IOHDAFamily          2.0.5f14
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
com.apple.iokit.IOUSBMassStorageClass          2.6.7
com.apple.driver.AppleUSBMergeNub          4.2.4
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOAHCISerialATAPI          1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.driver.DiskImages          289.1
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0
System Profile:
Model: iMac11,3, BootROM IM112.0057.B00, 4 processors, Intel Core i5, 2.8 GHz, 4 GB, SMC 1.59f2
Graphics: ATI Radeon HD 5750, ATI Radeon HD 5750, PCIe, 1024 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.6
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD1001FALS-40Y6A0, 931.51 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa120000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3

Lync 2013 and lync 2011 for mac (can not complete the call)

hi everyone
A brand new Lync 2013 installed and updated.
We are testing it on our LAN enviroment (no firewall issues).Our windows clients can sign in and can work very well with all options (audio ,video,conference ).BUt our mac clients (macbook pro with lync 2011 14.0.8 140321 ) cant make audio call
or video call.when they try to make it , it gives the following generic error ,cannot complete the call.
I enabled lync 2011 logging ,but also can not find the related log file also on the macbook.
One more info ,on macbookpro when we use the lync web app ,and we can make video and audio calls.
I tried to uninstall lync 2011 from macbook ,reinstall ...not worked
After the install tried to update ,the lync 2011 client step by step to the latest version ,But all microsoft lync 2011 updates are at the moment are to the latest version (14.0.8)h
T

Hi,
As the issue happen only for Lync Mac client, so it should be the of Lync Mac client.
You can try to perform a Clean Uninstall for Mac Lync client and then test again.
Here is a link below:
http://support.microsoft.com/kb/2691870
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Lightdm - can not set wallpaper and empty shutdown dialog.

hello guys!
i can not set wallpaper in my lightdm-gtk-greeter - screen behind login dialog is still black.
besides when i click on the shutdown button - where are no options at all!
here is my lightdm-gtk-greeter.conf and lightdm.conf:
# logo = Logo file to use, either an image absolute path, or a path relative to the greeter data directory
# background = Background file to use, either an image path or a color (e.g. #772953)
# theme-name = GTK+ theme to use
# icon-theme-name = Icon theme to use
# font-name = Font to use
# cursor-name = Cursor theme to use
# xft-antialias = Whether to antialias Xft fonts (true or false)
# xft-dpi = Resolution for Xft in dots per inch (e.g. 96)
# xft-hintstyle = What degree of hinting to use (hintnone, hintslight, hintmedium, or hintfull)
# xft-rgba = Type of subpixel antialiasing (none, rgb, bgr, vrgb or vbgr)
# show-language-selector (true or false)
[greeter]
logo=/usr/share/icons/hicolor/64x64/devices/archlinux-icon-crystal-64.svg
background=/usr/share/pixmaps/backgroundlfm.png
theme-name=Adwaita
icon-theme-name=mate
font-name=Sans Regular 11
cursor-name=Human
xft-antialias=true
xft-dpi=96
xft-hintstyle=slight
xft-rgba=rgb
show-language-selector=true
# General configuration
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# xsessions-directory = Directory to find X sessions
# remote-sessions-directory = Directory to find remote sessions
# xgreeters-directory = Directory to find X greeters
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
#log-directory=/var/log/lightdm
run-directory=/run/lightdm
#cache-directory=/var/cache/lightdm
#xsessions-directory=/usr/share/xsessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#xgreeters-directory=/usr/share/xgreeters
# Seat defaults
# type = Seat type (xlocal, xremote)
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xserver-layout = Layout to pass to X server
# xserver-config = Config file to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
# session-wrapper = Wrapper script to run session with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# exit-on-failure = True if the daemon should exit if this seat fails
[SeatDefaults]
#type=xlocal
#xserver-command=X
#xserver-layout=
#xserver-config=
#xserver-allow-tcp=false
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
greeter-session=lightdm-gtk-greeter
#greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
#user-session=default
#allow-guest=true
#guest-session=UNIMPLEMENTED
session-wrapper=/etc/lightdm/xsession
#display-setup-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
#autologin-user=
#autologin-user-timeout=0
#autologin-session=UNIMPLEMENTED
#pam-service=lightdm-autologin
#exit-on-failure=false
# Seat configuration
# Each seat must start with "Seat:".
# Uses settings from [SeatDefaults], any of these can be overriden by setting them in this section.
#[Seat:0]
# XDMCP Server configuration
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn. Alternatively
# it can be a word and the first 7 characters are used as the key.
[XDMCPServer]
#enabled=false
#port=177
#key=
# VNC Server configuration
# enabled = True if VNC connections should be allowed
# port = TCP/IP port to listen for connections on
[VNCServer]
#enabled=false
#port=5900
#width=1024
#height=768
#depth=8
any ideas?
upd: here is lightdm.log
[+0.08s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.12s] DEBUG: Starting Light Display Manager 1.4.0, UID=0 PID=504
[+0.12s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf
[+0.12s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.58s] DEBUG: Registered seat module xlocal
[+0.58s] DEBUG: Registered seat module xremote
[+0.58s] DEBUG: Adding default seat
[+0.58s] DEBUG: Starting seat
[+0.58s] DEBUG: Starting new display for greeter
[+0.58s] DEBUG: Starting local X display
[+3.88s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
[+3.88s] DEBUG: Using VT 7
[+3.93s] DEBUG: Activating VT 7
[+3.93s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+3.95s] DEBUG: Writing X server authority to /run/lightdm/root/:0
[+3.95s] DEBUG: Launching X Server
[+3.95s] DEBUG: Launching process 534: /usr/bin/X :0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+3.96s] DEBUG: Waiting for ready signal from X server :0
[+3.97s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+3.97s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+5.56s] DEBUG: Got signal 10 from process 534
[+5.56s] DEBUG: Got signal from X server :0
[+5.56s] DEBUG: Connecting to XServer :0
[+5.58s] DEBUG: Starting greeter
[+5.58s] DEBUG: Started session 558 with service 'lightdm-greeter', username 'lightdm'
[+6.15s] DEBUG: Session 558 authentication complete with return value 0: Success
[+6.15s] DEBUG: Greeter authorized
[+6.15s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+6.18s] DEBUG: Session 558 running command /usr/sbin/lightdm-gtk-greeter
[+7.77s] DEBUG: Greeter connected version=1.4.0
[+7.77s] DEBUG: Greeter connected, display is ready
[+7.77s] DEBUG: New display ready, switching to it
[+7.77s] DEBUG: Activating VT 7
[+16.32s] DEBUG: Greeter start authentication for shohart
[+16.32s] DEBUG: Started session 649 with service 'lightdm', username 'shohart'
[+16.49s] DEBUG: Session 649 got 1 message(s) from PAM
[+16.49s] DEBUG: Prompt greeter with 1 message(s)
[+24.87s] DEBUG: Continue authentication
[+25.00s] DEBUG: Session 649 authentication complete with return value 0: Success
[+25.00s] DEBUG: Authenticate result for user shohart: Success
[+25.01s] DEBUG: User shohart authorized
[+25.01s] DEBUG: Greeter sets language ru_RU.utf8
[+25.02s] DEBUG: Greeter requests session mate
[+25.02s] DEBUG: Using session mate
[+25.02s] DEBUG: Stopping greeter
[+25.02s] DEBUG: Session 558: Sending SIGTERM
[+25.03s] DEBUG: Greeter closed communication channel
[+25.03s] DEBUG: Session 558 exited with return value 0
[+25.03s] DEBUG: Greeter quit
[+25.18s] DEBUG: Dropping privileges to uid 1000
[+25.18s] DEBUG: Calling setresgid
[+25.18s] DEBUG: Calling setresuid
[+25.24s] DEBUG: Restoring privileges
[+25.24s] DEBUG: Calling setresuid
[+25.24s] DEBUG: Calling setresgid
[+25.24s] DEBUG: Dropping privileges to uid 1000
[+25.24s] DEBUG: Calling setresgid
[+25.24s] DEBUG: Calling setresuid
[+25.24s] DEBUG: Writing /home/shohart/.dmrc
[+25.33s] DEBUG: Restoring privileges
[+25.33s] DEBUG: Calling setresuid
[+25.33s] DEBUG: Calling setresgid
[+25.46s] DEBUG: Starting session mate as user shohart
[+25.46s] DEBUG: Session 649 running command /etc/lightdm/xsession mate-session
[+25.51s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
[+590.03s] DEBUG: Session 649 exited with return value 0
[+590.03s] DEBUG: User session quit
[+590.03s] DEBUG: Stopping display
[+590.03s] DEBUG: Sending signal 15 to process 534
[+590.89s] DEBUG: Process 534 exited with return value 0
[+590.89s] DEBUG: X server stopped
[+590.89s] DEBUG: Removing X server authority /run/lightdm/root/:0
[+590.89s] DEBUG: Releasing VT 7
[+590.89s] DEBUG: Display server stopped
[+590.89s] DEBUG: Display stopped
[+590.89s] DEBUG: Active display stopped, switching to greeter
[+590.89s] DEBUG: Switching to greeter
[+590.89s] DEBUG: Starting new display for greeter
[+590.89s] DEBUG: Starting local X display
[+590.89s] DEBUG: Using VT 7
[+590.89s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+590.89s] DEBUG: Writing X server authority to /run/lightdm/root/:0
[+590.89s] DEBUG: Launching X Server
[+590.89s] DEBUG: Launching process 2172: /usr/bin/X :0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+590.89s] DEBUG: Waiting for ready signal from X server :0
[+591.33s] DEBUG: Got signal 10 from process 2172
[+591.33s] DEBUG: Got signal from X server :0
[+591.33s] DEBUG: Connecting to XServer :0
[+591.33s] DEBUG: Starting greeter
[+591.33s] DEBUG: Started session 2177 with service 'lightdm-greeter', username 'lightdm'
[+591.35s] DEBUG: Session 2177 authentication complete with return value 0: Success
[+591.35s] DEBUG: Greeter authorized
[+591.35s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+591.35s] DEBUG: Session 2177 running command /usr/sbin/lightdm-gtk-greeter
[+591.41s] DEBUG: Greeter connected version=1.4.0
[+591.41s] DEBUG: Greeter connected, display is ready
[+591.41s] DEBUG: New display ready, switching to it
[+591.41s] DEBUG: Activating VT 7
[+591.41s] DEBUG: Stopping greeter display being switched from
[+591.57s] DEBUG: Greeter start authentication for shohart
[+591.57s] DEBUG: Started session 2197 with service 'lightdm', username 'shohart'
[+591.58s] DEBUG: Session 2197 got 1 message(s) from PAM
[+591.58s] DEBUG: Prompt greeter with 1 message(s)
[+595.21s] DEBUG: Continue authentication
[+595.26s] DEBUG: Session 2197 authentication complete with return value 0: Success
[+595.26s] DEBUG: Authenticate result for user shohart: Success
[+595.26s] DEBUG: User shohart authorized
[+595.26s] DEBUG: Greeter sets language ru_RU.utf8
[+595.27s] DEBUG: Greeter requests session mate
[+595.27s] DEBUG: Using session mate
[+595.27s] DEBUG: Stopping greeter
[+595.27s] DEBUG: Session 2177: Sending SIGTERM
[+595.27s] DEBUG: Greeter closed communication channel
[+595.27s] DEBUG: Session 2177 exited with return value 0
[+595.27s] DEBUG: Greeter quit
[+595.28s] DEBUG: Dropping privileges to uid 1000
[+595.28s] DEBUG: Calling setresgid
[+595.28s] DEBUG: Calling setresuid
[+595.28s] DEBUG: Restoring privileges
[+595.28s] DEBUG: Calling setresuid
[+595.28s] DEBUG: Calling setresgid
[+595.29s] DEBUG: Dropping privileges to uid 1000
[+595.29s] DEBUG: Calling setresgid
[+595.29s] DEBUG: Calling setresuid
[+595.29s] DEBUG: Writing /home/shohart/.dmrc
[+595.38s] DEBUG: Restoring privileges
[+595.38s] DEBUG: Calling setresuid
[+595.38s] DEBUG: Calling setresgid
[+595.55s] DEBUG: Starting session mate as user shohart
[+595.55s] DEBUG: Session 2197 running command /etc/lightdm/xsession mate-session
[+595.57s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session1
it seems that lightdm does not even trying to make background.... wierd.
Last edited by shohart (2012-11-15 08:08:09)

I have the same problem... IDK why I have an empty shutdown dialogue. I also have a bunch of non user users appear through it's menu.
It appears the problem has to do with most Arch installs not having consolekit anymore...
https://bbs.archlinux.org/viewtopic.php?id=151799
Last edited by akspecs (2012-11-17 23:59:40)

Problem related to PS CS6 ext. on Mac. Nikon DSLR D610 raw file can not be opened

Problem related to PS CS6 ext. on Mac. Installation is OK but I can't open picture from my Nikon D610 (Raw NEF format). I get a message "can not open this format ...". Checking Help menu to see if I miss an update the message I get is that I'm up-to-date but at the end Nikon D610 (format supported of course) files can not be opened . JPEG are OK but I work with raw files. Thanks

What OS are you running: 10.x.x?
What version of the Camera Raw plug-in do you have? Do (About) Plug-ins / Camera Raw to find out.
You need at least ACR 8.3 to open D610 files. If the Help / Updates process does not work, then there is a manual install process you can do. The page with the download is for when people accidentally updated to ACR 8.4 and need to roll back to ACR 8.3 due to their OS being incompatible, but the installer on that page works even if you haven’t erroneously updated to ACR 8.4:
http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

[SOLVED] Can not shutdown/restart from KDE with systemd

Hello,
Recently, following I switched to a pure systemd setup. The process was simple and most things worked "right out of the bpx". However, I can not shutdown or restart from KDE!
Let's say that I do the 3 finger salute (ALT-CTRL-DEL) and select "Turn off computer" what I get is KDE shutting down, but then I will only get a console (TTY) login prompt. Pressing ALT-CTRL-DEL then will trigger a reboot. I can also login and use "systemctl poweroff". However, I don't understand why it doesn't work straight from KDE.
Are there some packages I must install? Are there some systemd services that I must enable? What other relevant info should I include in this post?
Active units :
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
proc-sys...misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devi...d-card0.device loaded active plugged MCP79 High Definition Audio
sys-devi...da-sda1.device loaded active plugged ST9500420ASG
sys-devi...da-sda2.device loaded active plugged ST9500420ASG
sys-devi...da-sda3.device loaded active plugged ST9500420ASG
sys-devi...da-sda4.device loaded active plugged ST9500420ASG
sys-devi...da-sda5.device loaded active plugged ST9500420ASG
sys-devi...da-sda6.device loaded active plugged ST9500420ASG
sys-devi...ock-sda.device loaded active plugged ST9500420ASG
sys-devi...et-eth0.device loaded active plugged RTL8111/8168B PCI Express Gigabit Ethernet controller
sys-devi...t-wlan0.device loaded active plugged AR928X Wireless Network Adapter (PCI-Express)
sys-devi...y-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devi...y-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devi...y-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devi...y-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-module-fuse.device loaded active plugged /sys/module/fuse
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
sys-fs-f...nections.mount loaded active mounted FUSE Control File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted /tmp
cups.path loaded active waiting CUPS Printer Service Spool
systemd-...d-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-...word-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
bluetooth.service loaded active running Bluetooth service
colord-sane.service loaded active running Daemon for monitoring attached scanners and registering them with colord
colord.service loaded active running Manage, Install and Generate Color Profiles
console-...daemon.service loaded active running Console Manager
console-...-start.service loaded active exited Console System Startup Logging
cups.service loaded active running CUPS Printing Service
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
kdm.service loaded active running K Display Manager
NetworkManager.service loaded active running Network Manager
sshd.service loaded active running OpenSSH Daemon
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-...s-load.service loaded active exited Load Kernel Modules
systemd-...unt-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-...-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-...rigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-...ssions.service loaded active exited Permit User Sessions
systemd-...-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Storage Daemon
upower.service loaded active running Daemon for power management
wpa_supplicant.service loaded active running WPA supplicant
cups.socket loaded active running CUPS Printing Service Sockets
dbus.socket loaded active running D-Bus System Message Bus Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-...control.socket loaded active listening udev Control Socket
systemd-...-kernel.socket loaded active running udev Kernel Socket
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded active active Network
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
systemd-...es-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
72 units listed. Pass --all to see inactive units, too.
Last edited by Prozzaks (2012-08-20 17:35:48)

Demon wrote:For me the system only halts, it does not poweroff. How I can solve this?
As bgc1954 said, there is also a symlink "/sbin/poweroff". Just edit the file "/usr/share/config/kdm/kdmrc", go to [shutdown] an replace the line "HaltCmd=/sbin/halt" with "HaltCmd=/sbin/poweroff".

Can NOT install Standard ONE on a 2 quad-core processor machine (licensing)

This is from Oracle's licensing (July 2009):
===================================
“When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket. However, in the case of multi-chip modules, each chip in the multi-chip module is counted as one occupied socket.”
This is also from Oracle's licensing (July 2009):
=====================================
“Oracle Database Standard Edition can only be licensed on servers that have a maximum capacity of 4 sockets. Oracle Standard Edition One may only be licensed on servers that have a maximum capacity of 2 sockets.”
Now, this is what it seems to be:
===========================
1 quad-core AMD/Intel Xeon chip counts as 4x0.5=2 sockets (reached the maximum capacity limit in the licensing terms) by simply using 1 (single) quad-core CPU box.
and that's it - you can NOT install Standard Edition ONE on a 2 quad-core CPU Linux box :(((((
For a AMD/Intel multi-core Linux boxes
===============================
it can be a single quad-core CPU box (4x0.5=2 sockets -- but, paying twice the processor license - because it is now 2 sockets) or
it can be a 2 dual-core CPU (2X2x0.5=2 sockets -- but, paying twice the processor license) or
it can be a single dual-core CPU box (2x0.5=1 -- paying only a single processor license)
I think it is time for Oracle to revisit the licensing terms for Standard ONE edition and change it to simple socket count (don't count the cores). It is getting more expensive to use Oracle Standard ONE.

zaferaktan wrote:
Everybody should also know - and OPN folks confirmed this morning - that an Oracle Sales person does not have the "legal" authority to overwrite what is written in OLSA. Sales can not rewrite the OLSA. However, Sales can request changes or addendums to the specific contract, which are reviewed by Oracle Legal and approved by Sales senior management (right up to Charles and Larry if needed).
That said, very few Oracle employees are allowed to discuss any aspect of licensing terms. The official first point of contact is Sales, and they may only be the carrier pigeon of missives from the authority.
When someone buys Oracle, OLSA is the only legally binding document. Everybody should keep the copy of the OLSA which is in effect at the time of their purchase, given that OLSA can be modified at a later date from the actual purchase.That happens to be true of any license or sales agreement, from Oracle or not. Also note that if you purchase support, renewals may affect the original OLSA.
And it's one of the reasons old timers in these forums (such as Dan and myself) will prefix nearly any license discussion in the forums with "check with sales" and suffix it with "and anything you hear on the internet is probably useless in a court of law when you get audited".
and after all that - thanks for digging into the details and posting them.
(With the warning to any others using the information that the facts need to be reconfirmed for each individual case and date. A judge usually frowns on a defense of "It happened to a friend of a friend of mine" or "I read it on the internet")
Edited by: Hans Forbrich on Sep 8, 2009 9:43 PM
By the way - what you write is a change of policy. At one time, a box that could support 4 CPU but only had 2 CPU installed would not qualify for SE1. Good news indeed.

My macbook pro (10.6.8 version) the screen turns blue, can not operate, forced shutdown, I installed the windows 7 Home Basic version.

My macbook pro (10.6.8 version) the screen turns blue, can not operate, forced shutdown, I installed the windows 7 Home Basic version.

To fix your issue is too complicated and lengthy to go into all of it here, it will require the services of person very familiar and experienced with Mac's to first recover your data and then restore OS X back to a functional state, then hopefully achieve the goals you were attempting.
I advise you hire the services of a local Mac computer support technician experienced in these matters.
Have them look at your Wifi and computer backup proceedures in the process.
Good Luck.

Since my macbook pro is an intel core duo but not a core 2 duo, I cannot upgrade to Yosemite. So... what OS X can I upgrade to with this computer?

Since my macbook pro is an intel core duo but not a core 2 duo, I cannot upgrade to Yosemite. So... what OS X can I upgrade to with this computer? Thanks for the input.

Intel Core Duo is a 32-bit processor, so the latest Mac OS X version you can install is Mac OS X Snow Leopard -> http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
You are running Mac OS X 10.6.8, so you are already running the most recent Mac OS X version for your computer.

I have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

Try changing the channel in use in case you're getting interference.
If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
mrtotes

Can not logout, restart or shutdown

I have a Mac running 10.5.8. I have seen this on different models as well.
The user can not logout, restart or shutdown. When those commands are selected in the GUI nothing happens.
In the past the only way I could fix it was to create a new profile. There must be an easier way. does anyone know which files I should delete instead of having to create a new profile?

Richard Saunders wrote:
The user can not logout, restart or shutdown. When those commands are selected in the GUI nothing happens.
I'd launch the Console utility and look for messages that might explain the cause of the problem. You might find that it's due to a process that refuses to quit.

Core install - no man pages & can not eject cdrom solaris 10

I did a custom core install for solaris 10. I thought I installed all the packages needed, as well as all the dependacies.
I have no man pages!
I can not eject cdrom, I get an error:
"No such file or directory"
When I type vold I also get an error:
"fatal: vol-init failed (cant communicate with kernel)
I can not start in services by:
svcadm enable vold
How do I fix?

I have fixed the vol_init error
touch /reconfigure;init 6
What cd is the man pages on for solaris 10
would it just be pkgadd -d /yada/yada...

My oracle as well as the linux can not shutdown

my linux 7.3 and oracle 817, can not been 'shutdown abort', and for linux, "shutdown -fr now", after the case logged that the ram has been run out.
I think it could caused by the io process between oracle instance and filesystem was interrupte before it complete, and locked can not open.
there is some way to resume the system ,except for hot reboot I did now?
site: http://dep.daifumd.com

You can upgrade the iMac for no extra charge - sign into the App Store there, download and install 10.8.
I recommend that you make a backup (Time Machine is probably the easiest method) before you install, and make sure that you are not using any applications that are incomptible with 10.8 (eg Office 2004) - other than that, it should go smoothly.
Matt

Core shutdown can not be heat related

Similar Messages

Maybe you are looking for