Core temp monitor program for hp touchsmart 610-1250

Hi,
Re: HP TouchSmart 610-1250, 64 bit, Win 7.
This is a new computer, my first all-in-one, and I want to monitor core temp. My CPU gadget tells me this has no core temp monitor system. Is it possible to download a monitor?
As an all in one, I'm concerned about heat build up, since I'm using it all day.
Any info is appreciated.
Thanks
A
This question was solved.
View Solution.

Have you tried SIW? (System Information for Windows by Gabriel Topala) I highly recommend it. Go to the sensors page after you open it, and then It should tell you.
Please give Kudos. What other kind of recognition could I get?
Have I solved your problem? Mark solution as accepted.
I try to hate Macintosh. I really do. But I can't bring myself to hate any electronic device.

Similar Messages

Best temp monitor program for K8N and 6800GT?

I'm looking for a temp monitoring program that will display the following temps:
CPU
Chipset (system)
GPU
Core Center is ok but it doesn't allow for precise history and it doesn't display GPU temp.

The only thing I can suggest is a hardware thermistor and display, I have a GMC X-21 case which has a small temperature display on the font, and you can place the thermistor anywhere you like. I have it in between 2 fins on my CPU heatsink and it reads the temperature exactly the same as corecentre.

Where can I download HP Recovery Manager for my TouchSmart 610--1150xt running WIndows 7 x64?

Many users would prefer a clean install of Windows with the option to install only those applications that they personally find useful. Currently, if performing a clean install of Windows -- even if creating recovery disks and maintaining the HP recovery partition -- it is not possible to access the Recovery Manager with the option to re-install only the drivers and any useful preinstalled software. The only options under these circumstances is to perform a system restore back to the factory state thus removing an separate clean installation of the operating system or reinstalling the limited number of drivers and applications available for the TouchSmart from HP Support.
If it were possible to reinstall the HP Recovery Manager software, it should also be possible to selectively re-install needed drivers and applications from the recovery partition using the "Software Program Reinstallation" and "Hardware Driver Reinstallation" options. These options are not available from the boot menu or reinstall disks.
I have found downloads for the Recovery Manager software specific for Windows Vista and for certain specific HP laptops running WIndows 7, but I have been unable to locate a similar download for the TouchSmart 610 AIO. Has anyone located a download of the HP Recovery Manager software applicable for the TouchSmart 610?

This procedure uses the original factory installed HP OEM Windows product key and HP OEM certificate and requires the HP BIOS to have SLP/SLIC v2.1. This procedure will install a completely clean Windows 7 installation and may require the installation of HP drivers. Some HP drivers and/or HP software needed by your computer may not install because the OS is no longer branded as "HP". Please create your personal HP Recovery Disc set before continuing with these instructions. Back-up all of your personal data and files before proceeding with this process.
1) Download and unzip ABR Beta for Windows 7. Here is the main page to ABR for Windows Vista. Please follow the "How to use it" section for information and instructions on how to use it. These steps apply to Windows 7 as well. Perform the "activation backup" on your original hard drive with the factory HP OEM Windows installation, saving the backup files in several locations (USB stick, SD card, external drive, etc.).
2) Download your version (the version that was preinstalled on your HP computer) of Windows 7 from Official Windows 7 SP1 ISO from Digital River. Using the built-in Windows 7 CD/DVD burning software, burn the downloaded Windows 7 ISO image to a DVD.
3) Install Windows 7 from your new "Windows 7 disc" to your SSD, following all prompts as needed. Don't enter a Windows product key and don't allow Windows to try to auto-activate. After the Windows installation is complete, run ABR "activation restore" to "install" the previously backed up product key and certificate. Verify that Windows is activated, if not activated... repeat "activation restore" until Windows 7 is activated.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I, personally, have used the above procedure with great success on many HP desktops and laptops. I can't comment on how well it works with HP TouchSmart computers as I haven't had one to experiment on until recently.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Is there an existing balance and vibration monitor program for LabView for rotating machinery?

I want to test generators for ballance and vibration, and shaft critical frequency. The data is to be collected automatically and reports generated preferably with LabView. Can I buy a written program as a starting point? I know of the Sound and Vibration Toolkit, and am willing to buy it, but still prefer to start with a verified package. Currently we are using a Bently-Nevada standalone system that is limited in its capability. We are installing a new data collection system so have a lot of flexability.

Good Morning,
Yes, we can put together a written program for collecting balance and vibration data for generators. There is a new tool to be announced April 30th, that goes beyond the sound and vibration toolset for machinery monitoring. We can use LabVIEW and our Dynamic Signal Acquisition hardware to capture accelerometer data, encoder/keyphasor data, and other rotational parameters. We can provide an off-line analysis set of software as well, or report the data to any existing Computer Machine Maintenance Software (CMMS) you need us to work with.
I'd be happy to discuss this with you further.
Sincerely,
Preston Johnson
Business Development Manager
Industrial Applications
National Instruments
512-683-5444
[email protected]
Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
[email protected]
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444

System Tray CPU Temp Monitor Program

Good afternoon all, as I'm getting more and more settled into my new system I'd like to keep a close eye on some temperatures as I increase clocks.
I've gone through the downloads board and looked at a few of the mentioned utilities - one notable one that I recognized was Speedfan. I've used this in the past, and I have also used CPUTEMP - which was quite good.
What I'm looking for is something I can easily monitor from my system tray. Ideally I'd also like to get another program to monitor my GPU temperatures and have that on the system tray too.
TL;DR
Are there any member favourite utilities out there that you'd recommend for monitoring your CPU temps (that possibly have the minimize to system tray feature)?
How about some of your favourite utilities that do the same thing buy for your MSI GPU? (I could post this in another board - but maybe I can kill two birds here)
Note: I'm looking for something lightweight that doesn't require a ton of configuration/setup.
Thanks again guys - always appreciate the kind/helpful responses.

The latest evolutions of command center work quite well and have a desktop app I believe like cpu temp. (Which is what I used when I was overclocking more)
HW monitor is another goto app I have used many times in the past.

Temp. monitor for Neo4 SLI?

Can anyone recommend me a program that's like Motherboard Monitor for the Neo4 SLI? I'm looking for a program that will display the temps in the system tray. Too bad MBM is discontinued

the current system temp monitor program i'm using is Systool. it autodetects your mobo and videocard. it has a whole bunch of other stuff too. it even detects videocard temps. check it out @ http://www.techpowerup.com/systool/
there's ALOT more you can do with it too. but that's for you to find out.

Preferred cpu temp monitor softy?

what is the good cpu temp monitoring softy for 875pneo? i mean the accurate one. I've used aida and core center but yield different result. dont know which one to use... thnx!

I have been using motherboard monitor for years and is simply the best freeware monitor around. It even does OSD scripts with xml coding.
Motherboad Monitor
G16aByT3

SCHEDULING & MONITORING PROGRAMS (TO PROCESS 100 TO 5000 FILES A DAY)

We have the end to end set of programs for scheduling & monitoring any ETL programs. In big enterprises , the system to system data access always happens through ascii files. if there are systems which needs to recieve/load files & produce handoff files periodically and if the number of files handled in day are quite large (eg:atleast
100 to 5000 files ) you can make use of our programs.The features of the scheduler are
The ETL Program Scheduling
- Incoming files are grouped together ( eg: system_name + country + branch combination , Not necessary ), Similarly outgoing files as well.
- Files will get loaded only when the whole set is recieved
- More priority can be given to certain sets depending upon the need
- Loading set to Loading set dependency (very rare cases)
- Output set to loading set dependency (The output set will be generated when all(if any) dependent loading sets are loaded.
- Order of execution of files in a set (for both loading / output )
- Statistical information about everyday's loading files (Recived time , Start time & End time of a particular file on anyday)
- 5 Parrellel queues for loading and 5 for output generation ( Multi threading )
- Output files are automatically ftp'd if required
- Esay query mechanism to know which set failed , Which file/program failed in
- Status of execution of any file by ETL program from multiple sources ( Database , File Location in diff. directories , From log files )
.. and more
- Dynamic renaming of files & execution
Monitoring Program
- For the Data centre / Back office processing people
- For a incoming set, when crossed the deadline time, this monitor log shows the contact details
- When anything gets errord out the monitor log gives the set & contact details
- Holiday maintenance for any group can be maintained.
End of day programs
- To take care of purging & archiving of files, database & logfiles etc.
Tested with 2 ETL tools ( Constellar hub from DataMirror & Oraclewarehouse builder) and this scheduler is live in an International bank (confidential) in 3 regions (Asia Pacific , Europe & North America) "PROCESSING 1000+ FILES A DAY" at each of the 3 regional data centres for the last 10 years ( constellar ) .
Technology Specifications
Operating System > HP Unix
Database > Oracle
Software > Couple of Unix shell scripts & Pro*C code
IF INTERESTED PLS MAIL ME BACK AT [email protected] (i.e; ranjeesh007 at yahoo dot com)
WITH YOUR REQUIREMENT DETAILS
Cheers
Ranjeesh K Ramakrishnan
Mumbai
0091-98216 41777

Hi,
Sounds like you have a cache problem, it could be a file corruption. I would first suggest you to clear out everything in the cache directory and do a re-sync and see if issue persists.
Also, please check on your server or OneDrive to see the total amount of data that being stored. Check if you have any large files stored, like videos.
More reference about Office Document Cache settings:
http://office.microsoft.com/en-us/word-help/office-document-cache-settings-HA010388664.aspx
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support

I have the hp 610-1250 can i install hdmi port

This unit did not come with a HDIM output, I want to run a second monitor. Can i get or can i install one

jjzimm04 wrote:
This unit did not come with a HDIM output, I want to run a second monitor. Can i get or can i install one
Could you provide a full model product name, please? Google can't point a model for the "HP 610-1250"..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

P6N SLI , what is a good monitoring progran for temps, ect

I read that MSI program for temp monitoring isn't good to install so what does work with out taking alot of resorces ?

donot load any msi utilities, speedfan is a good but there are others, need more info on your sys specs, a good read through the forums are a good ideal.
lots of downloadable utilities here https://forum-en.msi.com/index.php?topic=45978.0

Temp monitoring for 5700 ultra

ok..1st off..i dont have a msi vid card..i have a PnY..fx5700 ultra...card runs fine..no issues(cept for an occational..."power supply not plugged in")..but my question is this..in the Nvidia card properties area..theres a spot that monitors my card core temp..and its set at 129 celceus...which is not possible...my case would be on fire if it ever got that hot..what i want to know is there any way to manually set the temp warning to a setting of my choosing..i mailed pny about it..and believe it or not..there answer was"make sure your fans plugged in"lol
i sat in utter amazement at the respone they gave me

ok...thx alot...im sure they know better then i do...it just seemed to me that was a bit high...id like the option of setting it to a temp of my own..but i guess its not possible...and i wanted to return the card to the store i bought it from..but in a rare case(i always put comp part reciept in the box it came from) i lost it ..i can return it through pny...but i dont wanna deal with the hassle right now..if it fails completely...then ill return it and put my ti4400 back in..once again..thank you

Need advice for a new monitor for Mac Centris 610

I have a Mac Centris 610. The Apple monitor(display unit) that originally came with it finally died. Would this old Mac be able to use a new flat-screen computer monitor? How can I find out what newer monitors wouldbe compatible with this old "war horse" computer. I use it for one application only, but it still works great for this. Many thanks to anyone who can rescue me from my predicament!

You can't use a new flat-screen display, because they have a widescreen aspect ratio (16:9) and that isn't supported by the Centris' onboard graphics. The Centris doesn't have PCI slots, so that eliminates that option. You could check thrift stores or computer recyclers in your area for an older display. You might have success using a Mac-to-VGA adapter having a set of adjustable DIP switches. It plugs into the Mac DB-15 display port on the back of the Centris and enables you to connect an older, multi-sync CRT display (4:3 aspect ratio) having a PC-style VGA connector.
From the specs posted at EveryMac.com for the Centris 610:
"By default, the Macintosh Centris 610 only supports a single display, but a second one can be supported with the addition of a compatible PDS or NuBus video card. With the standard VRAM, the system is capable of supporting 512x384 at 16-bit color and 640x480, 800x600 and 832x624 at 8-bit color. With 1 MB of VRAM installed, it can support 640x480, 800x600 and 832x624 at 16-bit color and 832x624, 1024x768 and 1152x870 at 8-bit color."

Firewire card for TouchSmart 610

I am considering buying a TouchSmart 610. I have some hardware that uses firewire. Are there any PCIe firewire cards that can be installed in the TouchSmart to provide a firewire port?
This question was solved.
View Solution.

Thanks for confirming that. I'm disappointed - I have a video camera with a DV interface that I would not be able to use with a Touchsmart.
Seems like most of the current crop of All-In-One systems are coming without firewire these days. Is that interface dropping off the scene?

How to disable touch screen for touchsmart 610

HP TouchSmart 610
Windows 7 64-bit
I need to touch the screen without causing stuff to move.

Not sure what you ? is since your subjet says : how to disable then your statement in the body of the form says " touch the screen without causing stuff to move" so confused.
What I suggest is pick your model here from the Model 610 page and look for what your asking within that page on your system.
http://h10025.www1.hp.com/ewfrf/wc/pfinder?cc=us&dlc=en&lc=en&tool=&query=touchsmart+610#N194
Hope it helps

Temp monitor for ppc?

what cpu temp monitor can be used for ppc mac mini or ppc mac?
using http://www.bresink.com/osx/TemperatureMonitor.html the widget one and i think that it is reporting the harddisk temp and not the cpu temp since it has the only option of "SMART Disk hardisk model here" and gave me a 45C-49C temp

I don't think there is a CPU temperature sensor on the PPC mini.

Core temp monitor program for hp touchsmart 610-1250

Similar Messages

Maybe you are looking for