CoreCell causing lockups on a AMD64 Via K8T800

Hi
I was getting occasional lockups in games and I have isolated the problem to CoreCell.
I do not overclock anything in my system and when I simply don't have Corecell running the PC's uptime is as long as I want it. However with CoreCell running the background Battlefield1942 will eventually lock up and hard lock the PC forcing a reboot.
Thought I should let MSI know about this issue.
Simon

Hei guyz.
yeah I have the latest verstion of CoreCell 1550 from this site, never used any other verstion.
As to the Audigy 2 I have no problems with it, I have it in the last PCI slot. I have however noticed when loading a game of Battlefield1942 that I get very subtle and low frequency disturbances in the sound while the game loads. This is however very very low and hardly audible but it's there. I had a similar problem with my P4 3GHz and Abit IC7 board and that was fixed with a driver update from Creative. Lets just cross our fingers
NOTE BIOS bug. If I have "Unusued PCI slot clock=Enabled" booting from my Highpoint RocketRaid PCI card doesn't work. The BIOS won't get passed the VIA SATA controller boot and the PC will simply sit there. However if I "Disable=Unused PCI Slot Clock" the BIOS will be able to finish it's boot sequence and load XP from the PCI addon RAID card.
Simon

Similar Messages

  • MOVED: [Athlon64] K8T Neo- VIA K8T800 MS-6702 - Windows XP Professional x64 - Driver

    This topic has been moved to Operating Systems.
    [Athlon64] K8T Neo- VIA K8T800 MS-6702 - Windows XP Professional x64 - Driver

    Yes, but in the long run I think you would be better off with a PATA CD-device. Performance wise difference is very small.
    Eh, you tried hitting F11 during first BIOS screen, to select?

  • MSI K8T Neo-FIS2R VIA K8T800 Issues

    I am thining of switching from a P4 system to a athlon 64 system. Only I have a few problems.
    Will I be able to use an amd athlon 64 3000+ on the MSI K8T Neo-FIS2R VIA K8T800 motherboard??
    and also will I be able to use my OCZ 1GB (512x2) DDR533Mhz PC 4200 RAM (DUAL CHANNEL) on the motherboard as well?

    Hi
    I use Elixir from Ebuyers, thats the cheapest I could find, works flawlessly on the AMD 64 3200+, the label says
    ' M2U51264D88HB3G-5T
    512MB DDR 400MHz- CL3
    PC3200U-30330
    The sticks were taken from a KT4 Ultra, where they also worked faultlessly.
    Hope it helps

  • JRE 1.5.0_11-b03 causes lockups, due to "activate control fix" ?

    We have a web application consisting of a varying number of Java applets. We are using a separate JavaScript file to load the applet into the HTML code, as a workaround for the "Click to activate control" issue. This seems to be causing problems:
    With the upgrade to JRE 1.5.0_11-b03, we began to recieve this error message:
    java.lang.NullPointerException
    at sun.plugin.AppletViewer.loadJarFiles(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    This message will appear in about 1 out of 3 reloads of a given applet, and applet loading appears to be very slow. The applet will then run as normal, most of the times. But once in a while, maybe 1 out of 20-50 times, the JRE locks up and IE has to be shut down using Task Manager.
    The behaviour has been reproduced on all computers we have tested which have 1.5.0_11-b03 installed (more than 5 computers with different hardware and operating systems), and with two different applets (both use JavaScript to communicate with the user interface)
    When we remove the "Click to activate control" javascript workaround, everything seems to be running as normal, but we really don't want our customers to be forced to click to activate each of the maybe 5-10 applets that can be in a single web page.
    Error and lockup reproduced on five computers having:
    Hardware: Misc. computers, both laptops and desktop computers.
    IE 7.0.5730.11
    Java 1.5.0_11-b03
    Using the previous Java 1.5.0_10-b03, everything ran smooth with no errors or lockups, even with the "Click to activate control" workaround enabled. (also IE 7-0-5730.11)
    This is becoming a real problem for us, as our customers are upgrading to the latest Java version and our application might hang randomly.

    I'm having the exact same problem!
    I've uninstalled JRE 1.5.0_11-b03 and I'm currently running 1.5.0_10-b03, which seems to work okay. But the problem is off course that our customers are upgrading to the latest JRE, which will cause the applet to randomly crash and the whole IE freezes up. Unfortunately, apart from the �uninstall-fix�, we haven�t been able to find any work-around for this issue�
    Would be great if anyone could verify that this is a �known bug�, or at least give us a hint that more developers are struggling with this strange behavior.

  • Express34 eSata card causing lockups

    I have a 2.53 MBP and an eSata express34 card that when I insert the card it will sometimes cause the system to lockup as in the message comes up on the screen telling to restart the computer. Is there a known problem with Express34 cards?
    -gl

    Download the new drivers from site..99.9% chances are you have this card.
    http://www.griffintechnology.com/articles/600-my-computer-keeps-locking-up-durin g-file-transfers-mac

  • VIA K8T800 RAID and Highpoint RocketRAID 1540 PCI card

    I've had this old HighPoint SATA RocketRAID 1540 PCI card sitting around for awhile now and I thought I would maybe use it to beef up my system. I am currently running a RAID striping array with a pair of WD 74GB Raptors via the K8T800 chipset (no pun intended) on my MSI K8T Master2-FAR workstation and a pair of 80GB Western Digital drives (separate partitions) that I currently use for storing raw data/projects that can be used to rebuild my system in the event of an OS crash (striping array is a bit more risky so I like having this around). My idea is that I would put the WD 80GB drives on a mirroring array and use them for data storage. The catch is that this coming week I am going to reformat and install a dual WinXP/SuSE boot partition on my Raptor striping array, and I will need to make sure that the mirror'd backup drive is accessible by both WinXP and Linux.
    Has anyone out there ever tried anything remotely like this?
    Thanks!

    I assume this Highpoint has it's own RAID-BIOS?
    If it does, you could be in trouble, the K8T-Master isn't very happy with controllers that use 2 instances of a controller.
    I have tried to get a lot of SCSI Raid controllers working, but no luck, they are the same pricipe.
    I tested:
    Ami MegaRaid 1600 Elite, windows saw it, but wasn't useable.
    Adaptec (forgot the model very old one), board refused to even boot.
    IBM Raid (very old as well) would boot, drivers would not install.
    Several other have seen the same problems, it has to do with the INT19 (software IRQ) where the controller needs to hook into.
    (At least I came to that conclusion)
    It doesn't hook into that, but the controller does show up, but can't use the RAID-Processor/BIOS for anything.
    A normal SCSI controller like the Adaptec 2940 or such are no problem, but they only use 1 instance.
    The difference between a RAID and Non raid controller is that the Non-Raid uses only 1 IRQ and Address, RAID (intelligent ones) use 2 IRQ's and 2 Addresses, and for some reason, the Mobo's BIOS doesn't want to hook both during boot.
    In Windows the drivers will load, sometimes, but when you try to access it, Windows is not able to communicate with the Raid-CPU and all sorts of nast things happen, if you even get that far.

  • Static NAT causes unable to access server via internal IP

    Hi all,
    Need some help. I running site-to-site IPsec VPN in Cisco 2811 IOS 12.4 both site. Here I encounter a problem to access server on  Site A from Site B
    Site A having Leased Line connected to router with Public IP. I have done static mapping 1 web server to Public IP (NAT). This to allow external users to access the server via Public IP. At the same time, users at Site B would need to access to same server via Internal IP since they have Site-to-Site VPN established. But once I done Static Mapping (NAT), user at Site B unable to access the server at Site A using its internal IP. But external user can access server via Public IP. What went wrong here. Do i need to add extra command to get this done? We really need this.

    Hi sheik,
    I'm accessing the server form Site B using its server's LAN IP.
    If I remove the static NAT statement from my router at Site A, everything works well. I can access the server from site B using its LAN IP via Site-to-Site VPN. But in this case, external users unable to access server via Public IP since no Static NAT statement.

  • Identical Usernames Cause Permission Issue w/ Officejet via Bonjour

    Mac Mini shares the officejet via Bonjour - default user is 'Bob.'
    MacBook default user is also 'Bob', it can see and connect to the officejet, but when you look at the local queue there is message saying "Can't Get Status - Forbidden!"
    Other machines on the network w/ different usernames connect fine.
    What permissions do I need to change on the Mini?
    what user the daemon runs as? Some queue directory some where, a plist?
    Thanks -
    Chris

    It depends on your router, and whether it is acting as a DNS server, and if it is keeping track of the hosts that are attaching to it and including its DHCP assignments in those DNS results.  Most consumer routers get a fail at this.  Part of the reason is that both Apple and Microsoft have their own independent means of doing local machine discovery.   I don't know what Microsoft calls their system this week, and I do not care.  Apple uses something called Bonjour.  To use Bonjour on Linux, you may want to look into Avahi.  Some distributions (Fedora?) support it out of the box.

  • Mail preferences cause lockup

    I have a new Mac Pro (2 x 2.4 GHz Quad Xeon) with 24GB RAM and a 512 SSD, and have been having problems ever since getting it.
    Current Problem:
    If I try to view Preferences in Mail.app, I get the beachball of death. Force quit is the only solution at that point. The mail functions work fine, but I cannot change any settings, add or update any accounts, modify rules or any of it.
    I've done the permissions repair, disk repair, PRAM reset, and LIbrary stuff of removing preferences and mail folders. This has not solved the inability to access mail preferences, though.
    Background:
    This is the second SSD after having hte first one replaced. Why? Because of cascading app crashes, and Lion would not reinstall. The Genius Bar restored my account on the new disk using a Time Machine backup from another disk on the machine. All seemed good for a while.
    A second visit to the Genius Bar was to try to fix more crashes. Now there were secret permissions problems (that seem to override the normal chmod permissions on files and folders) preventing apps from starting up properly. It stumped him, and he was looking up arcane system-level commands to try to clean these issues up. The Genius spend 2 hours creating new users, migrating apps over, etc. I left with things seemingly fixed.
    Also I have the same problem with Safari preferences when trying to set default browser. That gives me the beachball of death, too and the only solutio is to force-quit Safari.
    Perhaps related: iCal randomly crashes. No spinner, just suddenly it's gone and a crash report is in its place.
    Question:
    Is there any way I can totally reset Mail.app to at least test if there's a permissions problem causing this? Or must I resort to wiping the SSD and reinstalling Lion from a DVD?

    First, restore your Mail data. That's apparently not where the problem lies.
    Please read this whole message before doing anything.
    Boot in safe mode and log in as yourself. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all, possibly including wireless networking.
    Launch Mail, and test again. Same problem now?
    After testing, reboot as usual (i.e., not in safe mode.)

  • MSI VIA K8T800 MOBO for Athlon64 on STOCK!!!

    Hi,
    i was cheking dealtime for a mobo and i find this...check it out!!...its a MSI K8T800 MOBO for as just $144.80!!!...really amazing!!
    http://www2.dealtime.com/dt-app/SE/KW-msi_k8t/FD-0/linkin_id-3033365/NS-1/GS.html
    Please post your thoughts

    HardOCP posted pictures of the K8T Neo FIS2R great looking board I love the rear I/O layout with the all the audio connectors, and a Firewire port that way MSI can't screw with you with the brackets so when you have the top of the line board they don't give you a value bundle. Have a look at them here use the arrows underneath the pic to go to other ones though be careful no to click anywhere else on the window as it's a self close window.

  • 1.2.1 Firmware Causing Lockups

    I had the crash during podcasts issue with 1.2, and I haven't tested if 1.2.1 fixed it... Because now it can't make it through 1 song without the screen and scroll wheel locking up completely! It continues playing whatever song it is on, then stops playing, and none of the buttons seem to work and the screen is completely frozen! The only action it seems to take is a restart (Menu+Center Button) when it locks up.
    Anyone else seen issues like this with the 1.2.1 firmware upgrade?
    I did a complete "Restore" also, and it's still locking up.
    Is there any way to down-grade to the older firmware, my 60G iPod will only play one song now!!! Everything was working fine up until iTunes pushed this iPod firmware upgrade on me yesterday.

    I found a site that may take me back to 1.2.
    http://www.macintouch.com/readerreports/ipod/topic2401.html#dec31
    Here's the text of what Paul Constantine found.
    I have been able to "downgrade" my 1.2.1 firmware to 1.2, which does NOT list playlists with no content on my Pod. Keep in mind that we're talking about a "5.5G, video" model Pod). Here are some hints about doing it:
    The actual updater files are located in:
    ~/Library/iTunes/iPod Software Updates/
    Here are my file names:
    iPod_25.1.2.ipsw.signature
    iPod_25.1.2.1.ipsw.signature
    iPod_25.1.2.1.ipsw
    iPod_25.1.2.ipsw
    I have "heard" that there can be "iPod_13.1.2.ipsw" files for the 1.2 update.
    There are 2 tricks: first make sure ONLY the 1.2 files are in there. Second, you MUST disconnect from the Internet. There are many ways to do that, what I did was use System Prefs to turn TCP OFF, than log out and back in with the shift key held down. You will have to do a "restore" and go through the process of re-loading all content, but after dealing with some messages about a later update being available, you will end up back at 1.2.
    However, another big barrier is whether you HAVE the right files to revert. Obviously, Apple won't provide older versions. The only real reason I HAD the 1.2 files was because I did try a full restore (the first day I had the Pod) to maybe correct another annoying bug; if I hadn't done that I would have had to search "other" sources for the files.
    I haven't tried it yet. When I do, I'll try to post an update.

  • HttpConnection in background and UI thread in front causes lockups !

    Hi ,
    Iam running a midlet on Tre0 600 using IBM J9. (CLDC1.0/MIDP2)
    The design of the midlet is as follows.
    I have a main form with some items on it. (items are xml forms)
    When i select a item (form) fill it and submit, i put the data to be requested in a url and send to the server. (This whole process happens in a servant thread in the background)
    Once the data is qued in the servant thread, the control is given back to the main menu.
    When i do this operation and the control comesback to the main menu, any action on this main screen is done only after the servant thread has got a response from the server.
    If you do multiple clicks , it locks up the device and you have to do a soft reset, to recover.
    I found from the logs , the device was last trying to get the response from the url.
    Have anyone seen this issue ?
    Is there a way in the IBM PIM pref to make this work properly ?
    Appreciate your help.
    Thanks and warm regards
    Vignesh

    MainPage.LayourRoot?

  • Matrix Causing Lockup...

    I am using the UI-API to react to a user entering an Item ID on a Sales order.  For testing purposes, I'm just trying to return a message box with the value of the Item ID entered.  My code works fine until I set a reference to a new Matrix object.  At that point, the application freezes and won't let go until I shut down the VB.NET app.
    Here's the code:
    Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent
            If pVal.FormType = 139 And pVal.EventType <> SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD Then
                '// get the event sending form
                oOrderForm = SBO_Application.Forms.GetFormByTypeAndCount(pVal.FormType, pVal.FormTypeCount)
                Dim objItem As SAPbouiCOM.Item
                Dim objMatrix As SAPbouiCOM.Matrix
                Dim ItemID As String
        If pVal.EventType = SAPbouiCOM.BoEventTypes.et_LOST_FOCUS And pVal.ItemUID = 38 And pVal.ColUID = "1" Then
                    objMatrix = New SAPbouiCOM.Matrix
                    objMatrix = SBO_Application.Foms.Item(pVal.ForumUID).Items.Item(pVal.ItemUID).Specific
                    ItemID = objMatrix.Columns.Item("1").Cells.Item(pVal.Row).Specific.String
                    SBO_Application.MessageBox(ItemID)
                End If
            End If
        End Sub
    Any ideas on this??  Thanks!

    ItemID = objMatrix.Columns.Item("1").Cells.Item(pVal.Row).Specific.String
    instead of casting into "Item" cast the cell into "edittext"
    Dim mobjEditText As SAPbouiCOM.EditText
    mobjEditText =objMatrix.Columns.Item("1").Cells.Item(pVal.Row).Specific.
    I think it will help.
    Message was edited by: Amit Verma

  • Via k8t800 sound

    i am having an issue with my onboard sound.
    i have all latest drivers through live update.
    the problem is that my sound sounds like its a kitchen radio.
    i have good headphones and good speakers, yet when i listen to music, low volumes have bass and as soon as the volume gets pushed up, the bass disappears.
    it ends up sounding like a tin can and a string.
    i have tried everything i can think of, i have currently gone back to using my soundblaster live ( sounds 5 x better and is like what 4 years old? )
    anyone have any ideas?
     or is the sound on this board going to be as much of a disapointment as the board itself is ( nothing but problems from day 1 )
    any help much appreciated,

    thanks for the help
    i tried these and they have helped ( although the problem still exists ) its not as prevelant.
    does anyone else have this issue?
    as soon as i turn up the volume on any set of headphones i try , the bass simply vanishes.
    it sounds really bad, no matter how much bass or any setting i try to tweak.
    i was using an nf2 epox 8rda before this board and the sound kicked this ones arse all over the place.
    its so frustrating to have spent alot on a board and to have so many problems
    ok im done ranting
    thanks for the help

  • MSI K8T NEO-FIS2R Socket 754 VIA K8T800 ATX AMD Motherboard

    Hi all,
    Its been 7 months since i ahve been using this board. Now when i go to turn it on this very morning...The ps2 mouse and keyboard will not work and i smell a burning smell when its booting. I unpluged it and unhooked all cables tot he pc. I am now on my old gateway 2000 and i need help. What do i do?

    Well the burning smell could be dust or some such as this has been sitting for a while. However I would start with a visual inspection to see what the problem is. Check and see if any wires look toasted, pull the cards and even the MB and look them over carefully. If you don't see anything then set the MB out on some cardboard and just hook up what is needed to post. Retry it and see if you can watch during that inmitial stage to see what is happening. Worst case take the whole rig to a tech and have them look it over if you are concerned with risking any problems. Safty first always.

Maybe you are looking for