CoreMIDIserver and FCP interaction

Hello, I seem to be having two problems with Soundtrack Pro.
First is that every time I open STP, coreMIDIserver.framework also opens. It seems to freeze every time and freezes STP at the same time. I'm not using any MIDI in my STP project, so I don't quite understand why this may happen.
Second, I'm having a problem when I export a sequence to STP from FCP to finish the audio. Starting with last night, FCP has stopped automatically updating my changes that I made in STP.
I'm much more fluent with FCP than STP, so I appreciate any help.
Thanks,
Stef

Hi-
Yes, you are correct. File transfer (and the required conversion from AVCHD to an editable format) can be faster than real time, in fact much faster with a fast computer and raid storage.
When dealing with event/news acquisition and delivery, and every second counts, then file based is the clear winner.
The down side is the reliance and drive space and stability, and lots of both. And the discipline/organization required to run a backup program that is both effective, searchable and ready to be pulled into service at a moments notice,
When a student comes to you and says: "Mr. Peach, the disc drive that holds all our class projects isn't mounting and is making a funny clicking noise!" are you going to be able to swap in a backup drive with the required media on it?
That"s my point about switching to file based acquisition. There's no tape to fall back on. Because we have switched to XDCamEx and Red production, we had to add another crew member we call the "Data Wrangler" whose job it is to make sure all files or organized, accessible and backed up (in our case to several backup locations).
You demonstrate that you are both technologically knowledgeable, and creatively knowledgeable (with your string of awards) and I just wanted to highlight side of the tape to file based transition that is often overlooked.
One more comment - I wouldn't worry about using the technology of the "future". If that were the case, I would recommend you buy a bunch of Kodak Zi8 cameras, edit with iMovie '09 and deliver via You Tube.
Hope this helps and I'm sure you'll make the right decision.
MTD

Similar Messages

Canon VIXIA HF S20 and FCP interaction

Middle school, 13 year olds create a 2 hour video yearbook every year. We have won the California Student Media Festival 5 of the last 6 years in the yearbook category. We are not experts but do shoot with 4 cameras and use multiclip. It is amazing to see what 13 year olds can do when you raise the bar with FCP. My question is related directly to FCP and its interaction with cameras. We are looking at purchasing 4 new Canon VIXIA HF S20 cameras, using flash memory (we have the Canon Vixia 30 that use tapes now). I have read some on the Vixia HF S20, some on this list, some on the internet in general. We have used canons, have hundreds invested in batteries and are familiar with Canon. We are limited to about 1200 per camera. So, any terrible issues I should be aware of with the Canon Vixia HF S20?

Hi-
Yes, you are correct. File transfer (and the required conversion from AVCHD to an editable format) can be faster than real time, in fact much faster with a fast computer and raid storage.
When dealing with event/news acquisition and delivery, and every second counts, then file based is the clear winner.
The down side is the reliance and drive space and stability, and lots of both. And the discipline/organization required to run a backup program that is both effective, searchable and ready to be pulled into service at a moments notice,
When a student comes to you and says: "Mr. Peach, the disc drive that holds all our class projects isn't mounting and is making a funny clicking noise!" are you going to be able to swap in a backup drive with the required media on it?
That"s my point about switching to file based acquisition. There's no tape to fall back on. Because we have switched to XDCamEx and Red production, we had to add another crew member we call the "Data Wrangler" whose job it is to make sure all files or organized, accessible and backed up (in our case to several backup locations).
You demonstrate that you are both technologically knowledgeable, and creatively knowledgeable (with your string of awards) and I just wanted to highlight side of the tape to file based transition that is often overlooked.
One more comment - I wouldn't worry about using the technology of the "future". If that were the case, I would recommend you buy a bunch of Kodak Zi8 cameras, edit with iMovie '09 and deliver via You Tube.
Hope this helps and I'm sure you'll make the right decision.
MTD

MDOP 2013: App-V 5 SP2 Application Publishing and Client Interaction Guide Now Available

Hello App-V forum users,
Do you want to understand the details of how App-V publishes and runs applications? See
this Springboard Series blog post, which describes the newly available App-V 5 SP2 Application Publishing and Client Interaction Guide.
Enjoy!
-Tony
IT Pro Audience Manager for Web Forums

Hello,
I am truely confused by how you are attempting to achieve things.
1. The Office 2013 package is only supported if deployed globally
2. AppLocker is the way to restrict users from starting different applications
3. Office 2013 is not supported to be published to users
It seems you have issues with #3. Which is not supported. I am not saying it "doesn't" work, but considering you have issues with it - perhaps we can start by not doing it?
Ok, so what do we have left;
Per your statement, Office 2013 is published globally. Ergo, all shortcuts and applications should be available to all users.
Is this true?
Nicke Källén | The Knack| Twitter:
@Znackattack

Will Final Cut Studio 2 HD and FCP 7 Upgrade load on newest OS?

I have Final Cut Studio HD and an FCP 7 Upgrade on my old system. Looking to buy a new iMac and wondered if I could load Studio 2 and FCP 7 on the newest OS?
Any insight is appreciated!

Forgot to mention, although it will install it isn't officially supported by Apple anymore. Just in case someone jumps in to point it out.
DM

Is it possible to install both FCP7 and FCP X on your hard drive without running into problems?

Is it possible to install both FCP7 and FCP X on your hard drive without running into problems?

Apple recommends separate partitions: http://support.apple.com/kb/HT4722

Is it possible to add a drag and drop interaction to a called image in a contaner?

this forum is my last hope =( i know how to do drag and drop
by itself, however right now i have my flash set up so that when
you click BUTTON A, it does:
on (release) {
_root.gotoAndPlay ("photo1");
once it goes to "photo1", on that frame, i wrote actions on
the frame to:
var myMCL:MovieClipLoader = new MovieClipLoader ();
myMCL.loadClip ("images/heritageBrochureFront.png",
"container_mc");
stop();
so it loads my picture into the container. my question, once
the image it in the container, can i add drag and drop interaction
to it? i would really love an easy solution.

yes. there are a couple of ways to do this.
one is the create a child movieclip of container_mc and load
into that child and assign your onPress/startDrag
onRelease/stopDrag methods to container_mc.
a second way is to load into container_mc (like you're
currently doing), wait until loading is complete (ie, use the
onLoad method of an mcl listener) and then assign your methods to
container_mc.

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

I suspected you used the eye icon on the timeline to hide the message, but that one has no impact whatsoever on the published version. It is only meant to be used for editing reasons on the stage, to hide objects temporarily on a crowded stage. It is confusing, certainly in CP8 where for both instances the same eye icon is used. In previous versions the Properties panel had a checkbox for 'Show in Output', which was IMO much clearer than this eye icon. But of course, that is only my personal opinion.

Is possible in acrobat reader fill in and save interactive PDF created with LiveCycle Designer?

is possible in acrobat reader fill in and save interactive PDF created with LiveCycle Designer?

Hi,
Only if the form has been Reader Enabled before it is sent out to the user with Reader.
There are two ways of Reader Enabling the form. One using Acrobat Standard v9 or Acrobat Professional v8 (both have license restrictions). The other is to use LC Reader Extensions ES2, which is a server product (additional costs).
Some info here:
http://www.assuredynamics.com/index.php/2010/11/using-livecycle-forms-in-acrobat-and-reade r/
A search of the forums for "Reader Extensions" or "Reader Enable" will give more information.
Hope that helps,
Niall
Assure Dynamics

Drag and Drop Interaction Scoring

Hi-
I've created a drag and drop interaction for a quiz with four
objects. Each object has to match up to the correct spot in order
for the user to get the answer correct. I've done this type of
interactions before successfully and not had a problem with
scoring.
But this time .. the only thing I can see that's different
about this quiz is that I'm not assigning any points in the "Score"
field - I am instead using the Status of Correct Response alone.
I've found that this interaction scoring works perfectly for my
other quiz interactions but there seems to be a problem with the
drag and drop - when the user moves the objects around and
temporarily places an object in the wrong (or maybe even correct)
spot, each of these movements is being racked up as correct in this
interaction So, if there's an ambivalent user they're going to get
many more points than is even supposed to be possible.
I can't see anything different that I've done with this
interaction other than the scoring. I changed to correct response
scoring because it was the only way I could figure out how to reset
the quiz score after the user leaves and comes back. (using
TotalCorrect)
Anyway, I'm open to ideas - even if it's not the scoring -
any help would be appreciated!
Thanks -
Cammia

Don't use the quiz knowledge objects and code yourself...?
You'll find many on here who can help you with hand coding
and probably none
who know much about implementing those KO's who can answer
questions. The
reason is if you know enough to be able to answer questions,
you know enough
to know that these KO's are a short term crutch that cause
long term
problems.
HTH;
Amy
"Cammia" <[email protected]> wrote in
message
news:e8jm2u$77e$[email protected]..
> Hi-
>
> I've created a drag and drop interaction for a quiz with
four objects.
> Each
> object has to match up to the correct spot in order for
the user to get
> the
> answer correct. I've done this type of interactions
before successfully
> and
> not had a problem with scoring.
>
> But this time .. the only thing I can see that's
different about this quiz
> is
> that I'm not assigning any points in the "Score" field -
I am instead
> using
> the Status of Correct Response alone. I've found that
this interaction
> scoring
> works perfectly for my other quiz interactions but there
seems to be a
> problem
> with the drag and drop - when the user moves the objects
around and
> temporarily
> places an object in the wrong (or maybe even correct)
spot, each of these
> movements is being racked up as correct in this
interaction So, if
> there's an
> ambivalent user they're going to get many more points
than is even
> supposed to
> be possible.
>
> I can't see anything different that I've done with this
interaction other
> than
> the scoring. I changed to correct response scoring
because it was the only
> way
> I could figure out how to reset the quiz score after the
user leaves and
> comes
> back. (using TotalCorrect)
>
> Anyway, I'm open to ideas - even if it's not the scoring
- any help would
> be
> appreciated!
>
> Thanks -
> Cammia
>

Matrox MX02 Mini and FCP 7...

We have been using the MX02 Mini essentially for HD monitoring and have run across a few issues that have hindered productivity. It appears that one or two of these issues have been fixed in the latest 2.2.1 software release. The following remain. Has anyone experienced the same?
1) Audio scrubbing... audio cannot be heard on a per frame basis, usually audio is heard every three
frames or so.
Apparently this has not been fixed.
2) Audio playback. In the viewer... Hit play... Playback begins but the audio drops out and then
resumes... hit stop and playback repeats the last bit of what was playing before you hit stop.
3) Audio distorts, similar to an analog overdrive sound, when hitting play every 10 times or so.
Most of the projects that we are working with are Apple Pro Res 422 @ 23.98, Audio 48khz/16 bits.
Most of our computers are as described... 2 x 2.26GHz Quad Core Mac Pro running 10.6.6 and FCP 7.0.3.
Hard drives are local external 2TB G-RAIDs with plenty of room. We have check all of our media to make sure that it matches our sequence settings.
I realize that there are Matrox advocates out there, but we seem to have a hard time getting the MX02 Minis to work reliably.
All ideas are welcome. Note that we are working with Matrox support as well.
Thanks,
Scott

1) Audio scrubbing... audio cannot be heard on a per frame basis, usually audio is heard every three frames or so. Apparently this has not been fixed.
Well, that actually is the main thing that was addressed in that update. I didn't have the issue for a while, then I upgraded to snow leopard, and there it was. But that was something with the 2.0 and first 2.1 drivers. But the latest driver that was just released, 2.1.1...fixes that. For a lot of people, me included:
http://forums.creativecow.net/thread/132/860478
http://forums.creativecow.net/thread/132/860397
As for the other issues, that are all audio related... they should have been addressed too.
Make sure to update PROPERLY. Uninstall the older drivers, then restart. Install the new drivers... and when the updates erase and then update the firmware, when the computer will shut down, and you need to unplug the MXO2 mini for at least 5 seconds, then plug it back in. Then start up the system.
Shane

New 13" MacBook Pro and FCP Express?

Is the new 13" MBP OK for light video editing with iMovie or FCP Express and little photo editing with Photoshop Elements?
For video I use Panasonic AG-HMC40 AVCCAM HD.
Thanks!

Graphics.
However, as I keep telling everyone, I have an almost prehistoric 2004 G4 eMac (1.25GHz 768MB RAM and 32MB VRAM) which ran and still does run, FCE 4 and FCP 6 perfectly well.
The only minor problem was that the new FxPlug effects did not work, but with 200 other effects there was still plenty to keep anyone happy.
Your setup will not have that problem and even though it isn't the latest iteration it should still be excellent for the job.
Message was edited by: Ian R. Brown

Help with cs3 and fcp -from cs2 and fcp thread..

didnt want to hijack the thread about cs2 and fcp so started a new one
hi, I'm using a proRes 422 file ( mov ) 1920x1080p 23.98fps 16:9. Loads and plays fine in CS3 (custom desktop settings)...but wouldn't mind knowing your project settings for your trial shooternz...so I can compare...
My file is dark and a little flat...so I used levels effect adjustments. However, though it looks way better and exports OK ( hdtv 1920x1080p 24fps) I do see some "noise" now if I freeze the frame...is that common or am I over doing it on the gamma and levels correction ?
I'm just doing hd for the first time really on this machine, trying to figure out what I need in future for machine and upgrade to CS5...so I am going to dissect this file and figure this out til the cows come home so I don't have to deal with problems in future with new machine, etc.
Another thing...I have media info on this saying mpeg-4 ( mov wrapper) video = apcn ..audio = ipcm..
audio 1,536kbps, 1 hz, 16bits, 3 channels, ipcm..
However, there is no sound on the track which loads into audio 4 when video goes on video 1. This was shot with a boom - as I can see a boom shadow in shot during " back to 1 " on the set (when dolly moves back to 1 etc) .... ( sound mixer) so it's possible there is in fact NO SOUND embedded in the video file. Is that common to have a soundtrack appear even if it is empty with proRes ?
thanks...Rod

Wow, not too popular a subject ...this....
Got an update from the man who sent me the prores file...and a little info re: his opinion of adobe coming from FCP...I will share it with you all...
If you are going the Adobe route, I would highly recommend that because Premiere CS5 is a really impressive app when it comes to working with footage and editing. I have recently moved over to the Adobe CS5 Suite because Final Cut is good, but it hasn't been updated in a while....and the Mac is a really expensive alternative to a really good PC.
The color space for the clip I sent over was set for Rec709 HD Colorspace which is meant for broadcast, but on a non calibrated monitor, it will look dark. It usually requires a gamma shift and color treatment (since the clip is uncorrected), but it sounds like you are on your way.
Given the RED work flow, we always shoot raw and make the adjustments prior to rendering. The main reason we use the Adobe Suite is because you can work natively with any footage in the digital work flow.....FCP requires you to transcode everything into a Pro-Res Quicktime and you lose all of the really granular ability to treat the footage in order to get through the edit and color grade.
sooo, new computer will have a broadcast monitor ( just in case one is needed )...
I adjusted my clip by eye, plus vectorgraph etc, (levels and gamma) and it turned out fine...
Rod

Drag and Drop Interaction Wizard

I am having problems with the Drag and Drop Interaction Wizard. I am using Captivate (6.1) and when I launch the wizard I am able to select the drag objects and drop targets, but when I get to Step 3 (mapping), I am unable to map the drag sources to the drop targets. When I double click on the drag source and draw the arrow to the drop target, the arrow disappears.
Has anyone else had this problem? If so, what did you do about it?

Hi,
You do not want to double click on the object in Step 3. All you need to do to map the source to destination, on the Green Items you would notice a '+' symbol, drag and put them on the drop item, you would able to map them easily that way, double clicking them would deselect the object.
For more clarification, what this video tutorial --
http://www.youtube.com/watch?v=ILtUftHxmag
Thanks,
Anjaneai

Does Safari support a interactive PDF with hidden layers? I'm on version 5.0.3 and the interactive PDF displays just fine, but our web development team tells me all the layers display when they view the same PDF on Safari.

Does Safari support interactive PDFs with layers? Through the use of hidden layers and buttons we built in interactivity that allows the viewers to click on buttons to display different content. When I view the PDF in Safari 5.0.3 on my Mac OS 10.5.8 the PDF displays fine and the interactivity works. However our web design firm tell me the PDF displays all the hidden layers when they view it in Safari. Who's right?

Try updating your Safari to the latest version, 5.0.5.
Also check whether the rest of your system is up to date by going to Software Update in the Apple menu.

Having trouble having both an interactive form and an interactive page curl in a pdf?

Okay, so I need an interactive pdf with a page curl AND an interactive form. I exported my Indesign file as a swf file with the interactive page curl, (which the interactive form doesn't work on), then I imported the swf file back into Indesign, opened the media tab and chose the option to 'open file on current page' so that when I open the pdf it doesn't ask me to activate the file before use, and then export as an interactive pdf. the interactive page curl works perfectly, but the form doesn't work. How do I put an Indesign form into my interactive pdf?

Hi Enrico,
If I understand correctly, you are calling the addInstance() on click of the button that you placed in your form and when you add more pages using this button and save the fikle and open it again, the newly added instances are not displayed in the form. Am I right?
If this is the scenario, the you need to store the value of the forms created using this button and call the same addInstance() method in the initialize event of your form. I.e place the same code that is there in click event of the button inside the Initialize event of the form with the number that we have saved in some hidden field.
Hope this resolves your issue.
Cheers,
Arafat

CoreMIDIserver and FCP interaction

Similar Messages

Maybe you are looking for