CoreServices.framework for the device profile

I am trying to recompile my project to deploy it to the device ( first time).
However CoreServices.framework is showing in red, and my project does not compile, complaining about: #error "Unknown architecture." in FixMath.h . Is there a different name for this framework when using the device?
Thanks

I took a look at the iFactr plugin when it became available in Dec 2014. My advice - don't bother. Put simply all it does is update the VS2013 targets to make it possible to build a CF project, and allows it to open a CF project. You don't get any designer support at all, so you'll still need to use VS2008 for building your UI, unless you're extremely brave and decide to do it entirely through code. I also found that it took quite a few hoops to jump through just to get it building my projects without issues, whereas they built flawlessly in VS2008.

Similar Messages

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling

How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows. The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

I cannot make these directions work
I downloaded media on Overdrive MEdia on my PC
I have the overdrive media ap on my I pod touch 4g
this media is suppossed to be compatible w/I pd touch
Notes on Transferring OverDrive MP3 Audiobooks…
Most MP3 capable devices should play OverDrive MP3 Audiobooks.
If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
iTunes® v9.0.2 (or newer) is required.
The Apple device must be formatted for use with Microsoft® Windows®.
The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
Connect the iPod® to your computer.
If it does not launch automatically, open iTunes v9.0.2 (or newer).
In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
The 'Summary' screen is displayed.
Place a checkmark next to 'Manually manage music…'.
Click the 'Apply' button.
The iTunes 'Summary' screen refreshes, and the changes are saved.
If desired, close iTunes.
Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Windows 7 very slow logon, Waiting for the User Profile Service, winlogon event 6006

Hello,
Every so often one of our Windows 7 clients which is not normally having any delay at logon will take a very long time to login. This may be 10 or 20 minutes or up to an hour in some cases.
Typically the event log will contain entries like
The winlogon notification subscriber <Profiles> took 572 second(s) to handle the notification event (Logon).
There is no further information available from Event Log Online Help, nor any additional detail as to why the logon event was so slow. During the delay the user will just see "Waiting for the User Profile Service" on their screen.
We first started seeing this problem with Windows Vista and if anything the situation has not improved since then. It has never happened with any of our Windows XP users.
We are currently planning a migration of computers to Windows 7 but stuff like this which has not been resolved in Windows over a 2 year period will stall that migration. The least improvement is to increase the event notification to give a lot more
information on why the user profile processing has stalled.

Hi,
When did the issue begin to occur? Did it occur after installing certain application or applying certain policy?
To troubleshoot the issue, please perform the following step.
1. Restart the machine in Safe Mode with Networking to check whether the system can login quicker.
2. Type “gpedit.msc” in Search box and press Enter. Navigate to the following location:
Computer Configuration->Administrative Templates->System->Logon
Please double click “Always wait for the network at computer startup and logon” policy and disable it.
3. Perform a
Clean Boot to check the result.
Thanks,
Novak

"Please Wait For The User Profile Service" message when logging on to TS 2008

I have a Windows 2008 AD Domain with 2 Windows 2008 Terminal Servers. Both are configured identically. I have the TS Roaming profiles stored on a 3rd server and a GPO pointing all users to the roaming profiles. On one of the servers everything works perfectly. On the second server the users, after they input their credentials, get the following message "Please Wait For The User Profile Service". The message can stay there for up to 3 minutes, then they are logged innormall with the correct profile. This problem does not occur on log off. Any help would be appreciated

99% of the times I had this problem it was caused by either DNS issues or network bindings.
Are your servers multihomed? In other words: do you have multiple network cards? If so, make sure your "production" card is on top in the network connections -> advanced settings -> adapters and bindings.
You could also enable user env logging (search microsoft how to do that)

Luxadm probe / Could not find the loop address for the device at physical path

Using EMC FibreChannel Disks on a Solaris 10
# luxadm probe
No Network Array enclosures found in /dev/es
Error: Could not find the loop address for the device at physical path.
# echo $?
255
Any ideas how to fix?
Thank,
Marcel

Hi Marcel,
Which Solaris 10 release is this?
I found a very old bug that says this problem is already fixed in Solaris 10 although the bug description says
its mostly seen on Solaris 8 and 9.
https://bug.oraclecorp.com/pls/bug/webbug_print.showbug?c_rptno=15123550
The bug says that these errors are displayed when StorADE 2.1 is running its rasagent cron job, which executes a luxadm display.
This process runs in the background so the user is not aware that another luxadm display process is running.
Work-around: Do not run Storade rasagent cron job at same time as another luxadm display process.
I hope this might help to debug this problem but I puzzled why this might be happening if its already fixed.
Let me know if the workaround helps or so I can follow-up with the right support team.
Thanks, Cindy

Extract Stopped for the Device

hi guys
how do I configure the Doe for stop this message ?
Extract Stopped for the Device. Days not synced exceeds configured thresholdEnable Extract
I found these configurations.
Configure Maximum Level Values to Stop Extract for Receivers
Maximum Threshold for Queue Size (bytes):
Maximum Threshold for Days not synced:
Guys , can we explain me details about :
Statistics Configuration
System Status Configuration
Thaks
Edited by: esoliveira on Jul 16, 2011 7:50 PM

Hi,
best and most complete explanation you should find here:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/25/f091424bee7073e10000000a155106/frameset.htm
Regards,
Oliver

TS4006 I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI but no

I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows the device but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI and i tried all the stuffs that has been written in the manual. Plese give me the Proper suggetion about this issue..!!

If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it. Hence your device cannot be located. I suggest you try your test at some public wifi spot, like a bookstore or coffee shop. These places usually have a location associated with their wifi router.

E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

I have a problem with my ThinkCentre E72 (Windows 8).
Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:
"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP.
Only thing that is plugged in my computer is mouse, keyboard and monitor.
Many thanks,
Matija

Hi,
PNP0A0A is not a default pnp ID, you need go to the manufacturer websites to find the ACPI driver, download and install it.
Alex Zhao
TechNet Community Support

HT1212 hi sir i forget my password?for the device but now i know the paasword please help me one chance only

hi sir i forget my password?for the device but now i know the paasword please help me one chance only

hi sir i forget my password?for the device but now i know the paasword please help me one chance only

How do I find the activation code for the device

how do I find the activation code for the device for use with netflix

there isnt an application code for netflix, you enter your email adress and passowrd and it activates netflix automatically. hope this helps

HT1414 forgot iphone 4 passcode and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!

I forgot iphone 4 passcode and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Delete the assignments for the certificate profile

Hi Experts,
Can anybody please tell me how to delete the assignments of material for the certificate profile.
Regard
Raja S

Hi Shyamal,
I Run Trx QC18 , Entered Key Combination, same as what I have entered at the time of assignment through QC15. In the next screen, I entered the material code to delete from the Profile.& Execute
But in next screen there was no combination of material & profile in line item.
What to do.

ActionScript 3 frameworks for smart device apps

Hi there,
I have had a look at two frameworks (FeathersUI and MadComponents) that are designed for mobile and smart device application development. However, I don't have much experience in choosing the one that is more optimised for smart devices and don't know about what the pros and cons of each are.
I would greatly appreciate someone who's used them and knows a lot about the frameworks regardless of the one they're in favor of. I would like to know the differences in terms of performance, speed, limitations, what you can and can not do with each, how close each one is to native UI of iOS and Android. Last but not least, what do you rate each on a scale of 10?
Thank you.

Two things to look at are:
The mobile capabilities of ADF Faces.
http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/index.html
Which has components that will render automatically on mobile devices and HTML browsers adjusting themselfs.
Also you might be interested in the JWE extension to JDeveloper for Wireless development.
http://otn.oracle.com/tech/wireless/tools/index.html

How to write program for the long text in EMIGALL for the DEVICE LOCATION.

Hi,
I am pretty new to this ISU field and i have been asked to code for a Long Text in EMIGALL for DEVICE LOCATION,
so i would like someone can help me with it.
thanks in advance.
Robert.

Robert,
You can find most of the answers to your questions in the Guidelines:
Chapter 2.4.2 describes how to configure the field rule Fixed Value.
Chapter 2.4.5 describes how to configure the field rule via KSM.
Chapter 2.5 descibes the Key- and Status Management and the usage of the the KSM in field rules.
The specific answer to your questions are:
(1) ...When i was adding the fixed rule, it was asking for domain so what should be the Domain that i should add ... You may ignore the domain field when creating a fixed value object. It's more for information purposes.
(2) ... and what should i keep the fixed value, string or filed or abap rule ... I'd suggest to use 'String' and enter the specific value in the field 'FV contents'.
(3) ... Finally you need to adjust the RETURN-FIELD of the newly created BAPI migration object to AUTO-X_HEAD-TDNAME, where do i make this adjustment can you specify that ... The return field can only be adjusted int the migration object maintenance screen (MigObject -> Change). Please see chapter 3.1 for more details on the 'return field' and figure 3-8 in chapter 3.4.2 how to generate a BAPI migration object.
(4) ... Well i would also like to ask about the x_head-tdname = via KSM (e.g. DEVLOC), where should i put the value ... You wanted to know how to migrate a long text of a device location migration object DEVLOC). According to chapter Chapter 2.4.5 you need to enter the name of the superior migration object (here DEVLOC) in the 'MigObject1'field on the 'via KSM' sub-screen on the field maintenance screen.
(5) ... and what exactly would it be can i put DEVLOC in the ID of technical Object and where should i put this value... I am not sure I understand your question. In the end you will need to pass the number (ID) of the technical object in the TDNAME field. Either you put the id into the import file (only if you know the id) or you need to use the 'via KSM' field rule to replace the legacy system key of the device location by the SAP key by the load report and prior to passing the auto data to the application thus your new function module.
Kind regards,
Fritz

CoreServices.framework for the device profile

Similar Messages

Maybe you are looking for