Corporate Email Issues after upgrade to ICS
I cant see any emails in my Inbox folder. I already delete the account and set it up again but still no inbox messages.
Any suggestions?
Thanks
Probably a dumb statement/question - did you do inbox recycle (the little curved arrows thingy). Mine was empty prior to ICS but when I checked and hit refresh, they all refreshed and I had e-mail in two accounts.
The only e-mail I have that auto checks the inbox is g-mail. My e-mail (used to check the junk mail) folder only updates when I check it and that's fine with me. I don't need to be informed every time junk comes in the mail.
Oh, and one more thing. Are you using Facebook? I've seen some strange traffic about Facebook messing up e-mail accounts (changing e-mails to [email protected]) and changing peoples contacts lists. They aren't very specific about the OS (ios or droid) that's getting messed up.
Message was edited by: Thomas Veach
Similar Messages
-
Email issues after upgrade to 7.4.00070
I have been have issues sending emails to admins and receiving the following type of error messageUnable to deliver message to [email protected] Error message: Failed to determine login method. Check with user to ensure URL is correct and form-based or basic authentication is enabled.
I went to alter the email settings for the out going to smtp, but first cleared the settings as i have been advised beforeSMTP saved and i can now send messages from the help deskThe issue is with the incoming email nowI have tried multiple settings user accounts passwords and even tried gmail instead of our own exchange and i keep getting eitherError on incoming settings: Unexpected response from the Exchange server received. Are you sure you entered the correct address?i have tried user@domain, domain/user and just user with no luck
This topic first appeared in the Spiceworks CommunitySince upgrading to 7.4 and inventory action generates an "application error". Tried restarting and reinstalling to no avail.
This topic first appeared in the Spiceworks Community -
Stability issues after upgrade from 5 to 6.1?
Dear all,
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.
Many thanks in advance
Andreas"Andreas Raab" <[email protected]> wrote in message news:[email protected]..
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.Hi Andreas,
Normally proving that rumors are true is a responcibility of
rumors suppliers. Reverse does sound to me like a joke.
Regards,
Slava Imeshev
P.S. Current weblogic 6.1 is a stable product. -
Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query
Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
FROM COSP CLIENT SPECIFIED
WHERE GJAHR IN SELR_GJAHR
AND KSTAR IN SELR_KSTAR
AND LEDNR EQ '00'
AND OBJNR IN SELR_OBJNR
AND PERBL IN SELR_PERBL
AND VERSN IN SELR_VERSN
AND WRTTP IN SELR_WRTTP
AND MANDT IN MANDTTAB
GROUP BY (GROUP_LIST).
LOOP AT I_COSP .
COSP = I_COSP .
PERFORM PCOSP USING I_COSP-_COUNTER.
CLEAR: $RWTAB, COSP .
CLEAR CCR1S .
ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
endselect.
SELECT
into table
for all entries in table
where.
use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
e.g in your case
sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya -
Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsidi am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid -
I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.
Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :) -
Issues after Upgrade from Oracle 10.1.0.5 to 10.2.0.5 in Windows Server2003
Good Morning Good People,
I have run in to some issues after upgrading my 10.1.0.5 database to 10.2.0.5. Initially after the firtst upgrade from 10.1.0.5 to 10.2.0.0 one has to run Critical Patch set 4 to get to 10.2.0.5. Well after initial up grade everything worked fine. I could connect to the database from within the server as well as remotely through SQL*PLUS client. However, after completeing the patch I'm still able to connect to the database from within the server, but remotely i get the following error:
ORA-12514 : TNS Listener does not currently know of service requested in connect descriptor.
I also get Error ORA-12505: TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=mcquery2)(protocol=tcp)(port=1521))(connect_data=(sid=mcquery)(server=dedicated)))
I've tried serval different things to trouble shoot the issue but nothing seems to work.
If anyone has run into s similar issue please help. This is ruining my weekend! LOL!
Edited by: user10835577 on Aug 29, 2010 9:15 AMFrom the client or the server?
SERVER:
tnsnames.ora:
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
FROM REMOTE SQLPLUS Client:
tnsnames.ora
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Client_3)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cotsdot370.cotsdot.dom)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
Thanks,
Malcolm
Edited by: user10835577 on Aug 29, 2010 12:01 PM -
IPhone 4s issues after upgrading to IOS 8
Have few issues after upgrading to iOS 8
- Phone hangs every few hours, reboots automatically
- Bluetooth does not work properly (call does not get disconnected or even if disconnected on phone, the car bluetooth shows call is on)
- Searching for contacts is a problem
- Apps hang (especially facebook)
Any way to go back to iOS 7 ?
Any other tips / tricks appreciated..
VenkatNo way to come back to iOS 7 ...
But did you tried to reset all settings (general -> reset -> all settings) ?
For me iOS 8 was a mess on a 5S, especially car Bluetooth, and all works now fine after resetting the settings (all settings, not only network settings). -
After upgrading to ics is it necessary to wipe cache clean, and how do i do it
after upgrading to ics is it necessary to wipe cache clean, and how do i do it. My phone slowed down greatly
thanks for your helpIt don't hurt to do it but it depends on how your device is running.. here is the Full instructions
These are the Instructions on Clearing the Cache Partition: For Razr & Razr Maxx
Top Alternate method
Power the device off.
Press the Power button then select Power off.
If the device doesn't respond to input, press and hold the Volume Up / Down then press and holdPower button. When the device screen goes blank release the Power button while continuing to holdVolume Up / Down, proceed with step 3.
Press and hold the Volume Up / Down then press the Power button.
When presented with the Boot Mode Selection Menu release all buttons.
Press Volume Down to select Recovery then press Volume Up.
From the Droid triage screen, simultaneously press Volume Up / Down.
Select Clear the Cache Partition then press the Power button.
Select reboot system now then press the Power button. -
Autoconfig issue after upgrading 12.1.1 to 12.1.3
Hi all,
I am getting below mention autoconfig issue after upgrading 12.1.1 to 12.1.3.
jtfictx.sh started at Mon Mar 28 08:28:50 EDT 2011
SQL*Plus: Release 10.1.0.5.0 - Production on Mon Mar 28 08:28:50 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
DECLARE
ERROR at line 1:
ORA-29858: error occurred in the execution of ODCIINDEXALTER routine
ORA-20000: Oracle Text error:
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operation
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 665
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 96
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Product
ion
With the Partitioning, OLAP, Data Mining and Real Application Testing options
jtfictx.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
i got below mention some solution from metalink, but that does not working.
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=743720.1
according to note we need to create index but its giveing below metion error.
SQL> @jtfiaibu.sql jtf jtf apps
Connected.
DECLARE
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10758: index owner does not have the privilege to use file or URL datastore
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 37
Thanks in advance,
Sandeep.Hi,
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operationPlease make sure you have no invalid objects. And also please see of these helps. I know these are for older version, but please check
Script jtfictx.sh Failed While Attempting To Run The Autoconfig On APPS Tier [ID 1271186.1]
Autoconfig Returns ORA-29868 from jtfictx.sh [ID 386740.1]
By the way did u iinstall companion/examples CD after installing OracleSoftware
Thanks,
Taher -
Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
I had absolutely no problems before with Snow Loepard.
I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly. -
Audio issues after upgrading to OS X 10.10 (Yosemite)
Hello,
I have been facing audio issues after upgrading to OS X 10.10
- No sound in VLC
- Re-booting with Option-Command-P-R did not work
- System sounds are fine
- Quicktime Player works just fine
I tried:
- Plugging in earphones while video was playing on VLC
- F10/F11/F12 while video was playing on VLC
- Re-boot with Option-Command-P-R keys (found on a thread elsewhere)
- Played something in Garage Band (found on a thread elsewhere) and restarted VLC
None of the above solved the issue
Any one else facing similar issue with VLC on 10.10?
How did you manage to fix this?
I am running VLC 2.1.5 btw.
Thanks in advance!Shockwave says at the present moment not to be compatible with OS X 10.9 Mavericks.
Youtube, QuickTime, all play with no sound at all. -
Performance issues after upgrading to 11g
hello,
We are facing a performance issue after upgrading from 10g to 11g.
as you can see, the tables named APPLSYS.FND_ENV_CONTEXT has grown to 15544880 records,
and oracle is using TABLE ACCESS FULL on it:
DELETE FND_ENV_CONTEXT E
WHERE NOT EXISTS
(SELECT 'X'
FROM FND_CONCURRENT_PROCESSES P
WHERE P.CONCURRENT_PROCESS_ID = E.CONCURRENT_PROCESS_ID)
AND ROWNUM < 10000;
Plan:
DELETE STATEMENT ALL_ROWSCost: 74,345
5 DELETE APPLSYS.FND_ENV_CONTEXT
4 COUNT STOPKEY
3 HASH JOIN RIGHT ANTI Cost: 74,345 Bytes: 3,108,980 Cardinality: 155,449
1 INDEX FULL SCAN INDEX (UNIQUE) APPLSYS.FND_CONCURRENT_PROCESSES_U1 Cost: 166 Bytes: 315,450 Cardinality: 63,090
2 TABLE ACCESS FULL TABLE APPLSYS.FND_ENV_CONTEXT Cost: 69,124 Bytes: 233,173,200 Cardinality: 15,544,880
select num_rows,last_analyzed from dba_tables where table_name='FND_ENV_CONTEXT'
15544880 07/07/2011 12:08:55
please advice.
OferPlease see these docs.
Table Fnd_env_context Growing Very Fast [ID 419990.1]
FND Related Tablespaces Growing at Rapid and Excessive Rate [ID 189800.1]
FNDCPPUR Request Does Not Always Delete Files From The File System, Many Files Will Be Denoted As "deletion failed" [ID 1335304.1]
Concurrent Processing - Best Practices for Performance for Concurrent Managers in E-Business Suite [ID 1057802.1]
Concurrent Processing - Purge Concurrent Request and/or Manager Data Program (FNDCPPUR) [ID 104282.1]
Thanks,
Hussein -
Another issue after upgrade to 9.0.2a beta
another issue after upgrade from 8.1.7 to 9.0.2a beta.
When I use "update-request", I need to specify a stylesheet. In that stylesheet, the following lines work before upgrade:
<row>
<fieldname1><![CDATA[<html><head></head><body>]]><xsl:value-of select="request/parameters/fieldname1/."/><![CDATA[</body></html>]]>
</fieldname1>
</row>
After upgrade, it doesn't work properly. What I see in the database field value is storing only
<html><head></head><body></body></html>
instead of storing
<html><head></head><body>fieldname1_value</body></html>
How can I get my result back?
Thanks in advance.Thanks Steve,
I've upgraded to 9.0.2.0B but find the following error:
Oracle XSQL Servlet Page Processor 9.0.2.0.0B (Beta)
XSQL-017: Unexpected Error Occurred
java.lang.NoClassDefFoundError: oracle/jdbc2/Clob
at oracle.xml.xsql.actions.XSQLUpdateRequestHandler.handleAction(XSQLUpdateRequestHandler.java:103)
at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:134)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:139)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
at oracle.xml.xsql.XSQLServlet.doPost(XSQLServlet.java:82)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:115)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:83)
at com.caucho.server.http.Invocation.service(Invocation.java:237)
at com.caucho.server.http.RunnerRequest.handleRequest(RunnerRequest.java:323)
at com.caucho.server.http.RunnerRequest.handleConnection(RunnerRequest.java:263)
at com.caucho.server.TcpConnection.run(TcpConnection.java:136)
at java.lang.Thread.run(Thread.java:484)
Does it relates to the changes of usage of the "update-request" syntax?
Thanks in advance
Felix -
I use Apple mail on an IMAC & IMAC Mini. As I move from one to the other these email issues persist on both.
I try to clean out my email by deleting emails. I sometimes get an error message indicating I can't delete the message or when I do delete the message, then sometime later or when I go on the other computer these deleted messages reappear. I am also getting emails from some senders but the actual content belongs to another person.
I had none of these problems prior to upgrading to Yosemite.
Any suggestions would be helpful.
Chuckadam_30 wrote:
i can go with other carrier with my iphone 5s so for all the pple that are ging to read this read it again befor saying something to mee kk thanxso for what relly happen is i when too do the update to the ios 8.1 solfwaer on my dad iphone 5 frist so i coundn`t boot it back up so i call apple an they told me how to make the iphone 5 boot backup my dad was sineg into evering his itunes an his apple id an find myi phone an there telling me that he was not sing in but i know he was so he was able to get into his email bec he forgot his password too but how is that tho i would like to know that tho me on the other hand i have been ******* lock out of all my gmail an the curreent email that google has lock me out too its the current email is lock to my iphone 5s is lock to an so the owle email i can get on its bec it save on a friends laptop an i have the frist bill that rogers send to me its pretty much its the proof-of-purchase that what rogers told me today when it talk to like 15 different pple i talk today an they all told me the same thing it shown that we did it from rogers a show the day we had it activadev an its show the number of the activadev so am i getting such a heard time to get this done for me an like in one of the postting i did say that the one rorgers supervisor mamageran guy was talking to the apple supervisor mamageran an the rogers supervisor mamageran guy told the apple supervisor mamage that he was confirmed that the iphone 5s that apple lock wasnot a lost or a hot iphone 5s to the apple supervisor mamageran so after he ending up the rogers supervisor mamageran guy told me the my frist rogers bill it the same as the proof-of-purchasean that rogers supervisor mamageran is what there a saying to be so it the rogers supervisor mamageran say that that good so apple that should be good gor u an that rogers supervisor mamageran told me the he have gave that to pple an it work for them y not me just want to know
......................................... what?
Maybe you are looking for
-
hi i am a macbook and at a new job and trying to connect to a printer connected by usb to a windows 7 computer how do i connect to the printer ??? please whole step by step operation no nothing about computers thanks i need the help !!!!!!!
-
can not restore iPOD it is in disabled ,some cod 9006 need help
-
Suggest the way while validating fields in selection-screen
Hi Experts, I am not able to open multiple selection screen for select-options because when i tried to open, it triggers AT selection-screen event in which some validations are happened. If any of the validation fails, it will give message. Please su
-
Hi, I am facing this problem with LV2010. I am using windows 7 32-bit. Please refer to my attached vis. 6dof_v10 is the main vi while TCP init_stop and TCP start are both sub vis inside 6dof_v10. I have extracted much of the algorithms inside the con
-
How to run pm-util hook not as root?
My mouse settings do not restore when waking up from sleep, so I need to issue "kcminit mouse." But if I run it with sudo -u user kcminit mouse I get No protocol specified kcminit: cannot connect to X server :0.0 Anyone have any other ideas to solve