Corporate Group field in Customer master - Control data

If the customer or the vendor belongs to a group, you can enter a group key here. The group key is freely assignable.
If you create a matchcode using this group key, group evaluations are possible. How this field can be best used. Can some body highlight on this point with an example ?

Hi,
As per my knowledge for Foreign customers except Indian cutomers u got to maintain the two letters of the country code of the same customer's country in front of the VAT no.as suggested by Mr.PJ..this could solve ur issue..
Reg
JJ
Edited by: Jagsap on Jul 30, 2009 8:22 AM

Similar Messages

  • FB03 display restrictions by using corporate group field of Vendor master

    We had new requirement for the FB03 Transaction display.
    1>     In vendor master data we are assigning the Secure and non-secure for the corporate account group field. Based on the Secure and non-secure, we have to restrict the FB03 transaction display.
    2>     If itu2019s secure vendor, then no one should have authorization to display the documents belongs to these vendors of any transactions (Fb03 or FBL1N).
    So based on this criteria we need to restrict the display for FB03 transaction.
    thanks and regards
    Prathap

    Hello Pratap
    Please seek help from your SAP BASIS
    How it works is
    1. You have a T code
    2. You see which roles use it
    3.  Then accordingly you can tag that role to the User
    4. Moreover when basis works they check in SUIM t code as to which roles the T code is tagged to and then they go ahead and assign the same to the user
    5. There is another t code PFCG where they create z roles as well since standard roles are not used by them. And in this t code the authorisation objects are handled as well and profiles and roles are created. This is then tagged to a user.
    6. then this authorisation is visible in SU01 in the user
    Thanks and Regards

  • Adding new field to Customer master sales data area sales tab

    Hello everyone,
    I am new to module pool so seeking some help from experts here.
    I have a requirement were in I have to add a new field to the customer master (VB02) sales area data sales tab.
    I found that there is no screen exit.Is there any other way of doing it?
    could you please provide me with a step by step procedure of doing it.
    With Regards,
    Karishma.

    Hi,
    How did you look for screen exit? Have you also tried it in BADI? 'Coz normally, adding custom fields to a standard screen has to be implemented in exits.
    I haven't worked with VB* screens yet so I can not give you a some possible exits. But you can do some debugging. I think there's an available code in the net that searches for exits/screen exit (ask Mr.Google). You can also ask him how to search BADI in debugging mode. I remember it's TCode SE24 then look for cl_exithandler class, get_instance method. Then look for exit_name variable.
    Hope this helps.

  • Vendor Master Management - How to make 'Corporate Group' field an autoupdat

    Vendor Master Management - How to make 'Corporate Group' field an automatically updated field
    Frnz,
    I am doing a Spend Analysis and thereby restructring some aspects of SAP and business processes. One of the intiatives is to leverage the 'Corporate Group' field in Vendor Master for getting the consolidated spend visibility at the corporate group level of vendors. So far this field wasn't been used to effect. I can update it manually, but the question remains is how do I do with the change management of the corporate group of large vendor base in the scenario of everhappening Mergers and Acquisitions. Are there any alternatives anybody can suggest ? (Like linking D&B numbers etc)
    Thanks in advance for your suggestions..

    Hi Shiv,
    Let me elaborate the purpose of using this field. I want to have a consolidated spend visibility across a corporate group which has multiple vendor codes. Its difficult everytime to group the spends of these vendors manually especially when the number of vendors are too high. Also sometimes the names of vendor companies may not indicate that these are from same corporate group but in fact they could be. In order to have the reports generated on corporate groups, I must maintain this field in vendor master or a Z table. But the problem here is, it should be possible to update this field as and when there are any mergers or acquisitions at vendor side and the corporate group of a particular vendor gets changed due to this. So this has to be effected in vendor master or Z-table automatically. I do know that there are certain agencies like Dunn & Brad (DNB) which provide possibly the details on corporate group of a company but its not fully effective for Indian Vendors as its not mandatory on them to have DNB number & also its a disconnected process and I was looking to connect it seamlessly to Corporate Group field so that I need not bother to update these things manually everytime. I also wanted to explore various possibilities of doing this.
    I hope I have spelled it out correctly.

  • Group key on Customer master not maintainable.

    Hi All,
    Group key field under customer master General data is not editable for some customers only. What restricts us, not maintaining this field.
    Thanks
    Raghuram

    Hi,
    Customer 14788 is having Recon Account (5200500) , Group key is editable.
    Customer 702270 is having Recon Account (5200500) , Group key is not editable.
    So i understood that this field is not controlled by field status. Correct me if i am wrong.
    Thanks
    Raghuram

  • Customer master-general data-attribute-creation

    Hi,
    I would like to use the attribute 1 to 10 fields in customer master general data to fill up relavant to customer . i have seen some SCN postings regarding activation of those fields technically.
    i want to create some data in the attribute same like customer group 1 , while creation of customer master , i shall select the drop down and save it
    what is the menu path/transaction code for that please
    Thanks and regards,
    Pratheep

    Hi
    Check this menu path and also check below document in which Suhaib Bin Aziz has explained how to find SPRO path from front end screen.
    How to find SPRO Path from any Particular Screen
    Thank$

  • Change account groups in vendor/ customer master data

    Hi,
    Do you think is possible to change account groups in vendor/ customer master data?
    Thanks

    Hi,
    Good evening and greetings,
    Changing the account groups will redetermine the Reconciliation account, which will be creating a chaos during Audit Reconciliation. But if there is a requirement, please go through the following link
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f534545a11d1a7020000e829fd11/frameset.htm
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Addition of new field to customer master data

    Hi
    Is it possible to create a new field in customer master table screen  and
    to have the same field in sales order creation screen.
    can we do it in Ideas version of ECC.
    please guide me step by step.
    Regards
    Jai

    Hello,
    Information about the latest enhancement technology to change the standard SAP funcionalities can be found here :
    [http://help.sap.com/saphelp_nw2004s/helpdata/EN/94/9cdc40132a8531e10000000a1550b0/frameset.htm|http://help.sap.com/saphelp_nw2004s/helpdata/EN/94/9cdc40132a8531e10000000a1550b0/frameset.htm]
    This technology is also included in ECC 6.0, you can add fields, add fields to screens, ...
    Hope this is usefull.
    Wim

  • Transportation group field in Material master..Sales/Plant data tab.

    Hello Gurus,
    The transportation group field in material master is Material specific or a plant specific?? caz whenever i am changing this transportation group field in one plant it is also updating with the same value in all the plant for the common material even though the Company code and Country are different forall the plants.
    Hope to hear from you soon as its a very high priority production issue..
    regards
    Rikinl

    The transportation group field in material master is Material specific or a plant specific??
    Its material specific.  Even if you have multiple sales areas or plants and if you change the transportation group, the change will be applicable for those areas also.
    thanks
    G. Lakshmipathi

  • Configuring Group Key in Customer Master

    Dear Folks,
    I would like to add more group keys for selection in the field KNA1-KONZS.
    This field is in the customer master => general data => control data => group key.
    Could anyone advice me where in SPRO can I add more values to this field?
    Thank you.
    Best Regards,
    Junwen

    Hi,
    Customer 14788 is having Recon Account (5200500) , Group key is editable.
    Customer 702270 is having Recon Account (5200500) , Group key is not editable.
    So i understood that this field is not controlled by field status. Correct me if i am wrong.
    Thanks
    Raghuram

  • FD33 - Receivable Field in Customer master is not getting updated

    FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
    In SD, we are having the item category but i am not getting how to control for FI documents? How can i make them credit relevant item. Also for special item, we are controlling the same through Transaction code : OBXY - by special GL indicators but what about the normal/general item?
    How can I control the general FI documents having various FI documents type as relevant to credit check?

    Apart from the above,please also check the below:
    FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
    As per me there is no specific control to active the credit active field in FI values unlike for updating the sales values in FD32 we activate credit active for the item cat(VOV7) which will ensure the sales values to update (open order, open delivery and open invoices) in to credit management.
    For FI values to update i think this is inbuilt in the program only.( example update group 000012,15,18 etc).
    Any way coming into query not updating the receivables, please check the below points once again.
    1. Check the whether invoice has accounting document generated or not, make sure that it is generated then only system update the receivables.
    2. Even if the above all points are checked including above all posts,then also still the same issue repeating  then try to run the program RVKRED77, before this first run RVKRED88 and compare this values with FD32.
    thanks,
    Srinu.

  • Extra customer group 6 in customer master possible or not

    hi sd experts,
    my client asking for additional wants additional field in customers master >extras>additional data > one extra additional customer data (S&D) - existing 5 groups already using.
    img>sd>master data>business partners>customers>sales>maintain reserver fields in customer master - customer group 1 to customer group 5
    pl let us know in standard sap ecc 5, the getting additional customer group 6 is possible or not.
    pl help
    thanx in advance
    regards
    srihari

    Not possible in standard way as cust grp 1 to 5, but check below
    Go to SPRO> SD > System modification > Create New Fields (Without Condition Technique) > Reserve Fields In The Customer Master Record
    Sit with your abaper and do it.

  • Profit center Field in customer master

    Dear Experts,
    Is it possible to activate the profit center field in customer master under billing data, I saw the account group layout but center field is not there.
    Is there any other way is there for activating the profit center field.
    I saw this field in one of my client.
    please help how to activate the profit center field in customer master
    Regards
    Sri

    Hi
    Profit center as a field is not available in Customer Master. However, if you have new gl activitaed it is copied to the customer line item  from the offsetting line item. By system design, it is imperative, that the subledgers like customer or vendors are updated with the profit center of the line item. This is what the concept of document splitting is all about.
    Regards
    Sanil Bhandari

  • Report to fetch the text information from customer master sales data

    Dear Experts,
    We have come up with a requirement where the business want a report/list of the customers for whom a particular text is not maintained in customer master -sales data.
    There are many Z text id are configured and are maintained in Sales data- extras- text. In addition, business also need some key fields from the customer master such as name, city, delv plant, payment terms, sales off, sales grp etc.
    I could not get any standard table where the text is maintained with the customer numbers. Table STXH can give the customer numbers for a particular text id type but what is maintained against the given text id is not fetched from the table.
    So we need the valuable inputs to realize the requirement.
    As an proposal, we are aiming to develop custom Z report with the FM READ_TEXT to get the text information with the customer no ( object type KNVV and text id ). But for the additional information, what should be the actual logic for fetching the data. say if this FM is used, what should be the sequence of the logic and ideal selection parameters.
    In addition, we aim to use BAPI BAPI_CUSTOMER_GETDETAIL2 to fetch some of the customer ifnormation but many fields are not found in this . can we use some other bapi which can provide the complete general/sales data of customer ( delv plant, sales off, sales grp, custo grp, incoterms, payment terms etc)
    Kindly suggest accordingly.
    Many thanks in advance.

    Hi Dharmendra Kumar,
    I guess the best would be to check in ABAP General forum on the READ_TEXT sequence/ logic etc..
    For customer details, the available BAPIs are:
    BAPI_CUSTOMER_GETDETAIL
    BAPI_CUSTOMER_GETDETAIL1
    BAPI_CUSTOMER_GETDETAIL2
    However, you might have to check classes in SE24 to find any existing classes and its method yo give you all the information of a customer. Also check this thread: [BAPI for customer details like in IDoc DEBMAS;
    Regards,
    Raghu.

  • Solved - Group Fields for Vendor Master Records in IMG

    This was the solution.
    The new field's data element I added to LFB1 did not have the "change document" field checked.  I made that change and now that field shows up in IMG.
    Hello all,
    I added an append structure to the table LFB1.  This structure has 1 field.  I then created a "Modification-Free Enhancement of Vendor Master Record" to add the new LFB1 field to the vendor master screen, edit and display screens.  This is the 3rd time I have done this.  So far so good.
    Now our functional analyst went into IMG to add this new LFB1 field to a "Group Fields for Vendor Master Records" which we have done 2 other times.
    The new LFB1 field does not show up in the list of possible Table-fields.  
    There must be some other step I am missing.
    Does any of this ring a bell?  We are on version 4.7.
    Thanks
    Bruce
    p.s.
    This is the IMG path for adding 'Field Groups' to vendor master fields.
    Financial Accounting/
    Accounts Receivable and Accounts Payable/
    Vendor Accounts/
    Master Data/
    Preparations for Creating Vendor Master Data/
    Group Fields for Vendor Master Records
    Edited by: Bruce Tjosvold on Nov 21, 2008 1:18 PM

    Hi Vandana,
      There are several tables that are contain Vendor Master related data which can be used for extraction to BW. Some of the tables which can be useful for you are:
    LFA1 :  Vendor Master (General Section)
    LFM1 :  Vendor master record purchasing organization data
    LFBW : Vendor master record (withholding tax types) X
    WYT3 :  Partner Functions
    LFBK : Vendor Master (Bank Details)
    LFB1:  Vendor Master (Company Code)
    ADRC: Addresses (Business Address Services)
    ADR3: Fax Numbers (Business Address Services)
    ADR6: SMTP Numbers (Business Address Services)
    ADRT: Communication Data Text (Business Address Services)
    You may use the Data sources mentioned in the previous update from Venky above namely :
    0VENDOR_ATTR --- for master data attributes
    0VENDOR_TEXTS -- For texts
    Since the fields that you are using are from different tables so its better if you go for a Generic Data source where you can use the fields as per your requirement.
    Thanks
    Pawan
    Edited by: pawan190187 on Aug 19, 2011 12:40 PM

Maybe you are looking for