Correct actual quantity (QM - Inspection lot)

Hey,
I have two questions regarding this topic:
1) is it possible to correct the actual quantity inside an inspection lot that had already been skipped?
2) Can I also adjust the number of packaging pieces instead of only the kg's. For example: 10 barrels (1000kg) come in for inspection and 9 barrels (950kg) go out of it.
Thanks for replying!

Hello Philippe,
1) as long as nothin has been inspected in the skip lot and the UD has not been made you could use QAC1 to correct the inspection lot quantity.
2) using various MM transactions you can change the quantity in a quality inspection, the actual inspection size then has to be adjusted via QAC1. This can only work as long as no results have been recorded. Refer to note <a href="https://service.sap.com/sap/support/notes/485141">485141</a> for details.
Hope that this information helps resolve your issue.
Regards
Isabelle

Similar Messages

  • Standard report to check transfer quantity from inspection lot

    Hi All,
    Upon good receipts using movement type 101, an inspection lot will be created automatically in the system.
    After that, inspection results and usage decision will be done.
    So at the end, if I display that particular inspection lot using QA03, in the "Insp. lot quantities" tab, when I click at button "Mat. doc", I will be able to display the transfer material document stating transfer from which storage location to which storage location and how much is the quantity.
    For reports checking purpose, I need to check every Inspection lot created and then have to know the final destination and how much is the quantity. It doesn't make sense if I have to click one by one from QA03.
    Please advice whether there is a standard report for this or any other way possible.
    Thank you.

    Hi,
    I have checked your suggestion, but QA33 failed to accomodate my request.
    I want to show the material documents created from the inspection instead of the material document during good receipt.
    So, I want to link inspection lot, goods transfer material document created and the quantity transfered from the inspection.
    Please help again. Thanks.

  • Inspection Lot Qty Vs Actual Lot Qty

    Hi All;
    I am posting multiple GR's against a Process Order for Eg 1st GR 100 Qty, 2nd GR 200, 3rd GR 300 and after doing this in the Inspection Lot the Inspection Lot Qty shows as 100 and the Actual lot Qty of 600 (sum of GR's) hence the Inspection lot Qty is always less then the actual lot Qty.... is this standard,I was thinking the Inspection Lot Qty gets updated with the Actual Lot Qty and they should match.
    Thanks & Regards

    What is the process order quantity when Inspection lot was created? It should be 100.Usually the process order qty will be shown as the inspection lot qty and the GR qty will be shown as the actual lot qty. That's the reason the actual lot qty is equal to your GR qty. Most of the times, these two quantities are same.
    As said in the earlier response, for incoming goods the GR qty will be shown as the inspection lot qty and during inspection if you find the received qty is higher or lesser than the GR qty, using QAC1 the actual lot qty is corrected. So, always the actual lot qty is the qty received.
    Hope it helps.
    Thanks,
    Ram

  • Changing Inspection Lot Quantity

    Hi Guru's,
    Need a small bit of help.
    I created a Sample manually with 11 ea's. I used transaction QPR5 to created an Inspection Lot from this Sample. The Inspection Lot that was generated has a Quantity of 11. (This is not an issue).
    The issue is....I realized that I only have 9 pieces (EA's) and not 11.  I have went into the Physical Sample (QPR2) and changed the amount from 11 to 9.  Of course this doesn't update the Inspection Lot. I went into the Inspection Lot itself (QA02) and tried to correct the actual quantity of the Lot.
    When I went into QE51n. The Inspection Lot is still reflecting the original quantity of 11.
    Can someone please help me fix this? I am hoping I do not have to cancel the Inspection Lot and generate a new one.
    Thanks!

    In inspection test or lot text why are you not putting note - "this insp lot correct qty is 9 not 11".
    This kind of lot are not stock relevant, this are for just record/ audit purpose. So to make clear to auditor you can put note as well. This will resolve your prob.
    I hope this way you can achieve your req.

  • Control on creation of inspection lot during goods receipt against process

    Dear Friends,
    When goods receipt against process order  of say quantity 100 Kg is done in PP, inspection lot for the same of origin 04 is created in QM.
    My requirement is that PP should be able to post 90 Kg in quality inspection and remaining 10 Kg should directly go to
    reserve sample without coming in Quality.
    Is it possible?
    I have tried by changing material master record in MM02 for inspection set up data. But it is not serving the purpose.
    Thanks in advance,
    Regards
    Vrish

    Hi,
    04 type of inspection is GR at the time of Production Order.
    Whenever you do the production order quantity, an inspection lot is created. It will be created for full quantity which you are confirming (i.e. 100 kg will be considered and not 90 kg).
    This material will be Quality Inspection.
    You have to do Result recording and give usage decision.
    While giving usage decision, you can allot 90 kgs to Unrestricted and 10 kgs can go as Sample what you desire.
    Hope this will solve your issue.
    Srini

  • Control of Inspection Lot Creation in Material Master settings

    Hi
    There are settings like
    1 for each  document material,  batch ,storage location
    2 for each   material,  batch ,storage location .
    X for PO  , batch and storage location .
    for each material document item
    In the Control inspection settings of material master
    i Can't understand the logic by F1 help .
    Any help will be appreciated
    Thanks
    JJ

    Dear JJ
    These setting are done for controling the creation of inspection lots
    1) If you want to create an inspection lot to all the goods receipt then you have to choose
    ' ' An inspection lot for each material document item .An inspection lot is created for each item in the goods receipt document.
    2) X for PO , batch and storage location .
    An inspection lot is only created during the first goods receipt for each PO item . Means if you have a PO item with quantity 50. and you make a GR for the same PO for 10 quantity an inspection lot will be created. But if you make again GR for the PO item inspection lot will not be created. Those item will go directly to unrestricted. This holds good if the PO item is same, batch number is same and aslo the storage location
    3) 2 for each material, batch ,storage location
    If you set this indicator, the system creates only one inspection lot for each material and batch. This setting is only advisable for materials with a batch management requirement. Again material, batch number and storage location should be same
    4) '1'  for each document material, batch ,storage location
    If you set this indicator, the system creates only one inspection lot for a material document (in a goods receipt transaction) for each material. This setting is useful, if several purchase orders or partial deliveries are processed for the same material in a goods receipt transaction.
    hope this helps
    Regards
    gajesh

  • Inspection Lot Stock Tab - To Be Posted to Unrestricted-Use Stock

    Hi Experts,
    Please guide me for:
    At the time of UD,sometimes i forget to enter the unrestricted stock quantity in inspection lot stock tab therefor quantity does not transfer into unrestricted stock and  its shown in QI.So,i want to make it mandatory.please suggest me,How to do it?
    Thanks & Regards,
    Vivek Bhojak

    Hi Vivek,
    Please activate "Stock Posting in Background" indicator in Tx QS51 for your UD code as shown below -
    This should solve your purpose and complete stock form QI will be posted to Unrestricted stock/Blocked stock. This is a safer process I always recommend.
    Otherwise, in case you still wish to so UD posting form 'Inspection Lot - Stock Tab' manually, but want to make sure that is there is no quantity selected, then the UD shouldn't be done, then you will have to make enhancement appropriately below -
    QEVA0001  Enhancement: Quantity posting for usage decision
    Thanks,
    Arijit
    Message was edited by: Arijit Banerjee

  • In process Inspection  Lot Qty and Actual Lot quantity difference.

    Hi Experts,
    In case of  In process Inspection
    Scenario : 1. Production Order created, released but before saving the qty is changed.
                    2. Production Order created released and saved. Then qty is changed in Change Prod order txn.
    These scenarios are causing a discrepancy in  Inspection  Lot Qty and Actual Lot quantity. Is there any method to avoid this ?
    This can be made correct in  Inspection lot by resetting the sample calculation. But once confirmation has started for Prodn Order (not necessarily QC operation) or  RR has been done  resetting is not possible.
    Is this the std behavior ? Disallowing the resetting once RR done seems OK, but even if any of the operation in Prodn Order is confirmed it still give status error while resetting. Canceling all the confirmation all the way back  also does not solve the problem.
    Any suggestions ?
    Regards
    Joe

    Hi
    Although your suggestion is valid, it is not practical from user point of view.
    Moving this thread to QM forum.
    Rgds

  • Difference in actual qty & inspection lot qty

    Dear gurus
    i am in a situation.in the sales order the oty is 3000kg and the delivery made is alos 3000 kg . but when i checked the inspection lot (qa03) in the tab inspection lot qty the actual qty is 3000kg but the inspection lot qty and sample size is showing 2382 kg.what might be the reason.
    sam

    Hi Sam,
    3.There is one tab "correct actual Qty" in QA02.Have you made any chnages hee.
    have you checked it,
    Once you change this quantity and save, the lot quantity will also set accordingly.
    To track the changes for the same for inspection lot, press Cntr + F12 in either QA03 or QA02
    Regards,
    Shyamal

  • Tables for Single-quantity Inspection Lot Results

    Hello!  I hope someone could help me out on this one:
    Please correct me if I'm wrong, but I noticed that in an inspection lot, the results of the inspection is stored in the table QASE, but only if the quantity inspected is greater than one.  So, my questions are:
    1.  Which table are the results for single-quantity results are stored?
    2. [Optional] Why are the results not stored in the QASE table?
    Thank you in advance.

    Thank you very much for the response.  However, the QAMR table does not contain the data I need that table QASE has, specifically:
    Serial number            (QASE-SERIALNR)
    inspection results      (QASE-MESSWERT)
    Additional input from anyone would be greatly appreciated.

  • Inspection Lot quantity change (lot origin 03) when Prod. ord. qty changes?

    Hi,
    it seems that for an inspection lot, with lot origin 03:Production, its Inpsection Lot qty doesnt change when the Production order Total Quantity field changes. Only the Actual Inspection Lot changes.
    How can the Inspection lot quantity field of the Inspection Lot be changed accordingly?
    Should the enhancement PPCO0007 be used?and then LOSMENGE (table QALS) =GAMNG (table AFKO)
    Can it be done?
    Thanks in advance

    Hi,
    In that case, you can do it by :
    - Reread the master data of production order(From Menu Bar).
    - The status of production order will be converted from "Released" to "Created".
    - Release the production order again.
    Thanks
    SUMIT

  • QM Inspection Lot Qty vs Actual Lot Qty

    Gang,
    What is the difference between Inspection Lot Qty vs Actual Lot Qty. And which one of these should get updated when more than one receipt is against the same Material/Batch/SLoc?
    Thanks
    Bruce

    Inspection lot Qty & actual lot qty as I remind are most of the time same but when you do the QTy correction through QAC1 ,they come into picture...or may be when you have inspection control defined in the QM view
    Inspection lot qty has significance for inspection & calculation of sample size.
    When more than one receipt is against the same Material/Batch/SLoc the inspection lot QTy will be Qty for which he material document is created,

  • Inspection lot quantity in manual inspection lot (T.Code-QA01)

    Dear Experts,
    I have activated inspection setup "89" with lot origin '89".I have activated this inspection set up to a material in QM view.
    When i want to create a manual inspection lot through T.Code QA01, the inspection lot quantity is a required field. But i do not want to enter a quantity here. I want to create manual inspection lot without quantity. Is it possible?
    If yes, please suggest how to proceed.
    Your help is highly appriciable.
    Regards
    Vivek

    hi
    Use User Exit :QPL10001
    Description
        You can use this enhancement to change all the fields when creating an
        inspection lot. The function module is only run once.
        You must be careful when using this enhancement since this can lead to
        inconsistencies in inventory management. For example, if you change the
        quantity fields.
    Logic:
    Logic will be when you are using a specific Material say MATNR : xyz .......then disable the Qty field LOSMENGE.
    I hope this will help you
    Regards
    Sujit

  • Inspection lot correction

    Hi,
    By mistakely while created inspection plan i used incorrect sampling procedure due to which maunal inspection lot got created as 890000000011 but system was not allowing to do the result recording against lot No 890000000011.
    Then i discover the error and made the correction in inspection plan by changing the sampling procedure and then when i go to do the result recording then system does not allow me to enter the results against lot no 890000000011 but if i create the inspection lot then system allow properly.
    So please confirm whether the correction made can't be applicable to previous lots 890000000011 ? Or otherwise can we cancel the lots 890000000011 ? If yes then how ?
    Regards,

    Hi Sun riser,
    For the inspection lot 890000000011 what is the status? I believe the status is in CRTD. Unless lot is in REL status results recording is not possible.
    Go to Inspection Lot and click on insp specification tab, click on task list/spec and in sample tab click on sample. Changed plan with new sampling procedure will get assigned to the lot.
    Another way is you have block th lot by going to inspection lot - functions -Block the lot.
    Check and come back.
    Thanks & Regards,
    Ramagiri

  • Inspection Lot  quantity unit is changing to Basic UOM.

    Dear All,
    In material master, material unit is in MTR(M),for that material i created Production order in NOS
    I am confirming that order (TCODE -CO11N) in nos only ,up to last stage of confirmation it is in NOS only
    but after confirmation the lot is generating in qa32 that lot quantity unit is basic unit of measure i.e MTR(M).
    But i want that lot in confirmation unit i.e 'NOS' .
    So,please suggest me to solve this problem.
    Is there is any user exit to overcome on this problem.??
    Regards,
    Sanket.

    Hi,
    the UOM of QA32(inspection lot) is always similar to the UOM of MM03(material master).
    Arunima

Maybe you are looking for