Correct Choice of the QUARTER Bridge Type

Hello,
We have to measure 80x SG (strain gauge) channels with 20x NI-9237 modules in 3x cDAQ-9188 chassis. The CEng guy wants to use a passive SG for temperature compensation in all channels (although not needed because we use self compensating SGs in their temperature range). So he will glue the active SGs on the tested model, and he will glue the passive SGs on pieces of same material AWAY FROM THE MODEL - NO THERMAL CONTACT WITH THE MODEL!
This configuration for me is QUARTER Bridge Type 1 since the passive SGs (dummies) are just resistors unaffected by the seismic activities on the model.
However, he insists on Type 2 guided by its definition ("Strain Gauge Configuration Types" Tutorial) which sounds like his comprehension of his bridge. I stay with Type 1 because the dummies are not in a close contact to the tested model - I see them just as bridge completion resistors.
Can someone with expertise in SG conditioning and measurements help in solving this dilemma?
Thanks in advance,

OK, let me paraphraze my questions.
1. RemoteSensing
NI-9237 documentation says RemoteSensing is meant for HALF and FULL bridges, and for QUARTERs we should use shunt calibration. Since I plan to use Q2 which is not a HALF bridge will RemoteSensing be performed by the NI-9237 or not? If NOT, will measuring lead resistance do the job instead? I find it very awkward that this crucial info is missing from the NI-9237 documentation!
2. Brdge balancing
NI-9237 documentation says this module needs to know the "initial voltage" measured on disconnected ETERNAL part of the bridge to compensate for offset. I have used the "DAQmx Perform Bridge Offset Nulling Calibration.VI" to balance all my bridges in COMPLETED status prior to any acquisition. Is this doing the job so I do not have to measure the "initial voltages"?
The tasks of interest are the 3x cDAQ. The PXI task needs some IEPE current sources to be switched on for 60sec prior to the acquisition so that the PCB accelerometers can be initialized.
Thanks in advance,
Attachments:
SaveNullsFile.png ‏57 KB

Similar Messages

  • Quarter bridge configurat​ion 5B38

    Hi there,
    We seem to have some strain gage reading problems due to some wiring problems and we need to confirm the quarter bridge connections pins (4,3,1) using the 5B38 module. Attach is a picture depicting of how it should be set up. I like some confirmation if this setup is correct? Or is this setup incorrect? Thanks.
    Sandy

    Opps, here's the attachment I forgot to add.
    Sandy
    Attachments:
    Quarter Bridge 5B38.gif ‏16 KB

  • SCXI 1520 quarter bridge setup will not output excitation voltage, but full bridge will

    My SCXI system will not output an excitation voltage to the quarter bridge(verified with voltmeter). It works for a full bridge setup. When connected to a 'quarter bridge I' configuration, I can use MAX to null and shunt calibrate. The quarter bridge circuit appears to be balanced after the calibration, but the calibration results post a software gain factor close to zero, as well as a close to zero excitation voltage (eventhough I have the voltage configured for 5 volts). I have the SCXI 1520 module, the virtual channels, and the wiring properly configured (several years experience with this device). I'm using an old E series DAQ card AI-16XE-50, with the 50 pin cable that plugs in the back of the SCXI chassis. I noticed I had two bent pins with the cable connector module that plugs into the SCXI backplane.  I was able to straighten them, so the cable connects properly, but I suspect the bent pin incident caused electrical circuit damage. Any suggestions on trouble shooting? None of the three 1520 modules I have will output an excitation voltage for a quarter bridge.

    Sorry that I don't have an answer for you tyea, but I'm interested in your thread because I have a similar issue with a 1520. My excitation votltage, as measured with a DVM, is always 1V. I've tried 0V, 1V, 5V --- it's always 1V, on Full or Quarter bridge. I'm using a similar DAQ to yours - a PCI 16XE-10 (and a PCI-6030E on antother system).
    I don't have a lot of experience with these modules. This could be a wiring or programmatic thing I'm doing wrong.
    Richard

  • When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    You can take some of the steps here, #4, #5 or even trying a #18
    Step by Step to fix your Mac
    but I suspect your going to first have to create a data recovery drive
    Create a data recovery, undelete boot drive
    to get your data off the machine,
    then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
    Step by Step to fix your Mac

  • Is there a way to get the correct order from the dependent types of a sche

    Hi ,
    I have a CT facing the following problem:
    When trying to built a SQL script to create all the object types within a schema using the DBMS_METADATA packages.
    Did insert in a table the names of the types that will be exported following a concrete order, next loop into the table and call the DBMS_METADATA package for each row.
    These type are depedent between them, there are some type attributes calling other types and here the issue
    First : try to generate the order by created column of dba_objects and when the generated SQL script is launched a lot of type appearing as incomplete state due to the order isn't correct.
    Second : try to insert the table ordering by object_id colums of dba_tables view, it appears incomplete types too.
    Currently want to insert the table using a recursive query with connect by against the dba_type_attrs starting with the rows when ATTR_TYPE_NAME is not null (the types that are called by other types), but this way has a issue dificult to resolve: the roots of hierarchy are the rows when ATTR_TYPE_NAME is not null and we've dependencies between roots nodes
    The question is is there a way to get the correct order from the dependent types of a schema?
    Platform: IBM SP AIX
    DB version: 9.2.0.7
    Any help will be appreciated .
    Thanks in advance.

    The xxx_dependencies view should give you the dependencies betwee nthe various types. I would look at something along the lines of:
    SELECT object_name, referenced_name
    FROM (SELECT o.object_name, d.referenced_name
          FROM user_objects o, user_dependencies d
          WHERE o.object_name = d.name(+) and
                o.object_type = d.type(+) and
                d.referenced_type(+) = 'TYPE' and
                o.object_type = 'TYPE')
    START WITH referenced_name IS NULL
    CONNECT BY PRIOR object_name = referenced_nameThe outer join between user_objects and user_dependencies is required to generate the names of types which are not dependent on other types, or do not have other types dependent on them.
    HTH
    John

  • Using bootcamp was installing windows xp, at the select ntfs or fat format selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error.

    using bootcamp, was installing windows xp, at the select ntfs or fat format mistakenly selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error. and doesn't respond to press any key. When looking in the startup disk section, windows on boot camp can be seen, but not selected. (13"MacBook Pro  10.6.8)

    Have a read here http://support.apple.com/kb/TS1722 for solution.
    Stefan

  • I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file typ

    I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file type. I downloaded the latest updates for Adobe Raw as well as the DNG converter, however I don't want to have to convert to DNG before opening in Bridge. Please let me know what I can do to open the CR2 files directly in Bridge CS4, thank you!

    Make sure you have the right version...
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

  • Can iBooks Author hide sections of a book to be revealed only after the user selects a correct choice?

    Can iBooks Author hide sections of a book to be revealed only after the user selects a correct choice?

    K T wrote:
    'downside'....really?
    Well, yes, in the sense that simplicity has a price: it comes at the cost of reduced functionality. (If all the functionality were still there, things wouldn't be as simple; it's an inevitable trade-off.) It looks like IBA was designed with the iWeb philosophy: make simple things really simple, and leave out the stuff that's too complex to control for non-experts. The upside of course is that non-experts can use the tool really easily.
    K T wrote:
    No pain - no gain. You didn't come up with the content for your books without putting in fair time
    Sure. But almost all that effort went towards creation of the content, not towards laying it out with IBA (which was remarkably easy). So, in that sense, IBA more than met my expectations. The things it does do, it by and large does really well, and without much expertise needed on my part. The only thing that was complex was the HTML widget, which took some programming. But that's entirely my own fault, not IBA's
    Michi.

  • The I cloud on mu IPAd keeps reverting to my old password so that I cannot get mail. Sometimes this happens on my iPhone as well. I type in the correct password in the iCloud account and mail account under settings but it always reverts back and prevents

    The I cloud on mu IPAd keeps reverting to my old password so that I cannot get mail. Sometimes this happens on my iPhone as well. I type in the correct password in the iCloud account and mail account under settings but it always reverts back and preventsme from getting mail. Can only retrieve mail from i cloud on my competer. Thanks!!!

    Why would you delete your iCloud account for a password change with your Yahoo account?
    Regardless, if no problem re-creating your iCloud account on your iPad, contact Yahoo technical support.

  • Which of of these two choices is the correct way to call a report ?

    Environment is 9iAS.
    Which of of these two choices is the correct way to call a report from the menu?
    Choice 1) CGNV$INVOKE_REPORT('W02226.adinfra.net:8888,reports9i', 'rv043knd.rdf', CACHE, '', 'HTML',NULL );
    Coice 2) qms$menu.set_current_action('LAUNCH_REPORT','rv043knd.rdf'); execute_trigger('QMS$MENU_ITEM');

    although the menu-preference MNUDRC has the value qms$menu.set_current_action('LAUNCH_REPORT','<MODULE>'); execute_trigger('QMS$MENU_ITEM');
    the generated code for calling the report in the menu is like the code under option 1).
    What else do we need to set (in the preferences or elsewhere) to use the Headstart Report Launch Form ???
    thanks! Bart

  • AFTER I DOWNLOADED FIREFOX 4, EVERYTIME I OPEN THE PROGRAM I GET THE FOLLOWING MESSAGE- TYPE ERROR:COMPONENT.CLASSES[CID] IS UNDEFINED. HOW DO I CORRECT THIS?

    After upgrading to firefox 4, everytime I open the program, I get the following message, "TYPE ERROR:conponentclasses undefined." How do I correct this?

    That indicates that you are using an add-on that is not compatible with Firefox 4. For details of how to troubleshoot this to find out what one is causing the problem see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • [svn] 4112: Further work for FXG to SWF transcoding - checking in some work resulting from collaborating with Kaushal to correct FXG transforms and gradient transforms as well as cater for differences between Java AffineTransform and the SWF Matrix type .

    Revision: 4112
    Author: [email protected]
    Date: 2008-11-14 10:05:42 -0800 (Fri, 14 Nov 2008)
    Log Message:
    Further work for FXG to SWF transcoding - checking in some work resulting from collaborating with Kaushal to correct FXG transforms and gradient transforms as well as cater for differences between Java AffineTransform and the SWF Matrix type.
    QE: Not yet.
    Doc: No
    Checkintests: Pass
    Reviewer: Kaushal
    Modified Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/GraphicContentNode.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/fills/LinearGradientFillNode.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/fills/RadialGradientFillNode.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/strokes/LinearGradientStrokeNode.j ava
    flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/strokes/RadialGradientStrokeNode.j ava
    flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/swf/AbstractFXGGraphics.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/swf/TypeHelper.java
    Added Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/ScalableGradientNode.java

  • Why are there no 1920 X 1080 Choices in the Sequence settings

    I watched some videos trying to understand what is the best speed and frame size to use when creating a video.  Basically Lynda.com they are saying 1920 X 1080 is full resolution and this is the desirable setting for outputting best resolution.  The aspect ratio for this is 56%.
    Also they explained the best speeds for the type of output you plan to make.  So from this I naturally expected to find a High definition 1920 X 1080 setting as a choice in setting up a new Sequence in Premier Pro.  Wrong!  To my surprise there is only one choice that will give you these setting right out of the box, What's up with the settings choices.  The recommended setting should be right there and easy to find.  Below I show the choice of AVCHD is the only obvious choice for creating a 1920 X 1080 video.  Can you guys help?

    Just to toss in my two cents worth - I don't believe any DSLR shoots 1080i, should all be progressive as 1080p or 720p. And back to the "HDV" or "Anamorphic HD" thing - with square pixels (1.0 Pixel Aspect Ratio) 1080i/p is 1920x1080 and if you divide each side of that by 120, you get 16 and 9. A 16:9 ratio between width and height (not 56% or 1.7777777 !!!!). "Anamorphic" widescreen is a way of "faking it", and saving a smaller file since less data is involved. That is how HDV works. It uses 1440x1080 pixels, and they are not square, rather they are rectangular with a 1.333 pixel aspect ratio. The pixels are wider than they are tall, and that makes up the difference so that it still plays back looking like 16:9 (IF the player respects the PAR). Simple math shows that 1440 x 1.333 = 1920! So 1440x1080 with 1.333 PAR "looks" the same as 1920x1080 with 1.0 PAR, even though 1440x1080 comes out to 4:3. Which brings up the last point, if anyone IS editing HDV footage, and wants to export to say YouTube or other other computer/tablet playback formats, do NOT export as 1440x1080 because most players will not pay attention to the PAR and the video will look like 4:3 (players wrongly assume 1.0 PAR). You will want to export as 1920x1080 with 1.0 PAR and then all is right with the world. Or take it down to 720p at 1280x720, also 16:9 with 1.0 PAR for correct playback.
    Thanks for reading and good night ;-)
    Jeff

  • Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding [and I'm at my wit's end!]

    I originally posted this question to the community section and was advised to post it here.  Please bear with me as this will be a long post.  I'm including the scenarios involving this reoccurring issue, the trouble shooting steps I've already
    taken and the results of several diagnostic tools and logs.
    I have a Sony VAIOS VPCEBB33FM lap top since 2011.  I have had this issue on an off for a long time.  I'm at my wit's end.  Any new insights or suggestions would be greatly appreciated.
    Scenario Details
    1)  Some times it's on and off through out the day, sometimes it won't work all day, and once in a while it will work fine for the entire day.
    2)  I've had this issue across several wireless services, Clear Network accessed with WiMax, Library Wi-fi, Comcast cable internet using wireless router and Wi-fi, and Comcast Xfinity Wi-Fi, to name a few examples.
    3)  Other devices in the household or library will work with no problems such as my smart phone or my roommates' laptops or desktop computers.
    4) Once in a while,  the built-in wireless adapter is not found and I have to reinstall the driver.  Also the diagnostic tool has had to reset my adapter on an increasing basis.
    5)  I had my hard drive replaced in December 2014 and my system restored from the System Restore disks that came with it when I bought the laptop.  Even though I've been online on an infrequent basis it worked just fine for a while. Now that
    I've been online a bit more I'm having the same issues again.
    Below are my attempts at trouble shooting so far but I still have not been able to consistently resolve my DNS issues
     1) Restarting my adapter
     2) Turning off my laptop and removing the power supply for 5-10 minutes before turning it back on.
     3)  Using the IP Config in Command Prompt
         ipconfig /flushdns
         ipconfig /registerdns
         ipconfig /release
         ipconfig /renew
     4) Using the NetSh reset in Command Prompt and restarting my laptop
         netsh int ip reset c:\resetlog.txt
         netsh winsock reset
         ipconfig /flushdns
         [restart laptop]
     5)  Configuring the TCP/IP in several settings
        Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
        I have used the following settings:
           a) Obtain an DNS server address automatically
           b) OpenDNS
               208 67 222 222
               208 67 220 220
           c) Google DNS
               8 8 8 8
               8 8 4 4
     6) Updating the driver for my Intel Centrino(R) Advanced-N 6250 AGN and Intel Centrino(R) WIMAX 6250 from the Intel website previous having my laptop wiped clean in 2014.  It still did not resolve the issue.  My laptop
    manufacturer as not come up with an driver update for my adapter since 2010.  I haven't tried to update the adapter driver from Intel's website since having my laptop repaired due to the fact that Intel strongly recommending using the manufacturer's updates
    instead and frankly it didn't make much of a difference when I did it the first time.
     7) The last one I've tried as of today is going into Services and changing the start up type to automatic for the following:
           Computer Browser [changed from manual to automatic]
           DHCP Client [already set to automatic]
           DNS Client [already set to automatic]
           Network Connections [already set to automatic]
           Network Location Awareness [changed from manual to automatic]
           Remote Procedure Call (RPC) [already set to automatic]
           Server [already set to automatic]
           TCP/IP Netbios helper [already set to automatic]
           Workstation [already set to automatic]
    ...and I'm still having DNS issues.
    My only guessing are that my laptop came with a lemon adapter that needs to be replaced, some advanced setting(s) that I'm not aware off, or my firewall/anti-virus is interfering. I've used Symmantic Anti-virus and Firewall in the past and currently
    Avast Anti-Virus with Microsoft Network Firewall.  I've had DNS issues with both anti-virus/firewall set ups.
    Below are the results from the diagnostics and tests that I've ran.
    Windows Network Diagnostics
    Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected Detected
    Contact your network administrator or Internet service provider (ISP) Completed
    Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be...
    Details about network adapter diagnosis:
    Network adapter Wireless Network Connection driver information:
       Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6250 AGN
       Manufacturer  . . . . . . . . . : Intel Corporation
       Provider  . . . . . . . . . . . : Intel
       Version   . . . . . . . . . . . : 13.2.1.5
       Inf File Name . . . . . . . . . : C:\Windows\INF\oem17.inf
       Inf File Date . . . . . . . . . : Monday, June 14, 2010  9:05:44 AM
       Section Name  . . . . . . . . . : Install_MPCIEX_GEN_6250_AGN_2x2_HMC_WIN7_64_MOW
       Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0087&subsys_13018086
       Instance Status Flags . . . . . : 0x180200a
       Device Manager Status Code  . . : 0
       IfType  . . . . . . . . . . . . : 71
       Physical Media Type . . . . . . : 9
    Informational Diagnostics Information (Wireless Connectivity)
    Details about wireless connectivity diagnosis:
    Information for connection being diagnosed
     Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
     Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
     Interface type: Native WiFi
    Connection incident diagnosed
     Auto Configuration ID: 1
     Connection ID: 1
    Connection status summary
     Connection started at: 2015-03-07 19:57:14-186
     Profile match: Success
     Pre-Association: Success
     Association: Success
     Security and Authentication: Success
    List of visible access point(s): 22 item(s) total, 22 item(s) displayed
            BSSID        BSS Type PHY    Signal(dB)    Chnl/freq    SSID
    60-02-92-C6-D3-E8    Infra     <unknown>    -62        11     HOME-C7D4-2.4
    60-02-92-A1-75-E0    Infra     <unknown>    -58        6     HOME-B917-2.4
    00-1D-D5-D5-34-F0    Infra     <unknown>    -73        6     HOME-34F2
    60-02-92-A1-75-E1    Infra     <unknown>    -58        6     (Unnamed Network)
    06-1D-D5-D5-34-F0    Infra     <unknown>    -78        6     xfinitywifi
    C4-27-95-C9-C4-2D    Infra     <unknown>    -57        1     HOME-C42D
    02-1D-D5-D5-34-F0    Infra     <unknown>    -74        6     (Unnamed Network)
    00-0D-97-07-E0-79    Infra     g    -75        6     (Unnamed Network)
    00-1D-CF-2A-44-C0    Infra     <unknown>    -86        6     HOME-44C2
    02-1D-CF-2A-44-C0    Infra     <unknown>    -86        6     (Unnamed Network)
    F8-E4-FB-3C-87-A2    Infra     <unknown>    -89        6     YVNM7
    06-1D-CF-2A-44-C0    Infra     <unknown>    -87        6     xfinitywifi
    0C-F8-93-7A-13-50    Infra     b    -87        6     PKennedy
    06-F8-93-7A-13-50    Infra     b    -89        6     xfinitywifi
    02-F8-93-7A-13-50    Infra     b    -87        6     (Unnamed Network)
    E0-88-5D-C8-A9-DC    Infra     <unknown>    -80        1     HOME-A9DC
    E2-88-5D-C8-A9-DD    Infra     <unknown>    -79        1     (Unnamed Network)
    16-CF-E2-43-0B-30    Infra     <unknown>    -88        1     xfinitywifi
    60-02-92-F0-A8-C0    Infra     <unknown>    -90        11     HOME-96A6-2.4
    60-02-92-C6-D3-E9    Infra     <unknown>    -63        11     (Unnamed Network)
    02-1D-D4-EB-87-00    Infra     <unknown>    -88        11     (Unnamed Network)
    06-1D-D4-EB-87-00    Infra     <unknown>    -88        11     xfinitywifi
    Connection History
     Information for Auto Configuration ID 1
      List of visible networks: 13 item(s) total, 13 item(s) displayed
      BSS Type PHY    Security    Signal(RSSI)    Compatible    SSID
      Infra     <unknown>    Yes        63    Yes        HOME-C7D4-2.4
      Infra     <unknown>    Yes        70    Yes        HOME-B917-2.4
      Infra     <unknown>    Yes        43    Yes        HOME-34F2
      Infra     <unknown>    Yes        70    Yes        (Unnamed Network)
      Infra     <unknown>    No        40    Yes        xfinitywifi
      Infra     <unknown>    Yes        71    Yes        HOME-C42D
      Infra     g    No        43    Yes        (Unnamed Network)
      Infra     <unknown>    Yes        28    Yes        HOME-44C2
      Infra     <unknown>    Yes        20    Yes        YVNM7
      Infra     b    Yes        21    Yes        PKennedy
      Infra     <unknown>    Yes        33    Yes        HOME-A9DC
      Infra     <unknown>    Yes        35    Yes        (Unnamed Network)
      Infra     <unknown>    Yes        16    Yes        HOME-96A6-2.4
      List of preferred networks: 3 item(s)
       Profile: xfinitywifi
        SSID: xfinitywifi
        SSID length: 11
        Connection mode: Infra
        Security: No
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: Yes
       Profile: HTC Portable Hotspot 9F50
        SSID: HTC Portable Hotspot 9F50
        SSID length: 25
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: No
         Reason: 0x00028002
       Profile: belkin.332
        SSID: belkin.332
        SSID length: 10
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: No
         Reason: 0x00028002
     Information for Connection ID 1
     Connection started at: 2015-03-07 19:57:14-186
      Auto Configuration ID: 1
      Profile: xfinitywifi
      SSID: xfinitywifi
      SSID length: 11
      Connection mode: Infra
      Security: No
      Pre-Association and Association
       Connectivity settings provided by hardware manufacturer (IHV): No
       Security settings provided by hardware manufacturer (IHV): No
       Profile matches network requirements: Success
       Pre-association status: Success
       Association status: Success
        Last AP:  06-1d-d5-d5-34-f0
      Security and Authentication
       Configured security type: Open
       Configured encryption type: None
       802.1X protocol: No
       Key exchange initiated: Yes
        Unicast key received: No
        Multicast key received: No
       Number of security packets received: 0
       Number of security packets sent: 0
       Security attempt status: Success
     Connectivity
       Packet statistics
        Ndis Rx: 2068
        Ndis Tx: 2543
        Unicast decrypt success: 0
        Multicast decrypt success: 0
        Unicast decrypt failure: 0
        Multicast decrypt failure: 0
        Rx success: 3954
        Rx failure: 0
        Tx success: 537
        Tx failure: 4
        Tx retry: 2
        Tx multiple retry: 2
        Tx max lifetime exceeded: 0
        Tx ACK failure: 18
       Roaming history: 0 item(s)
    InformationalDiagnostics Information (Wireless Connectivity)
    Details about wireless connectivity diagnosis:
    For complete information about this session see the wireless connectivity information event.
    Helper Class: Auto Configuration
     Initialize status: Success
    Information for connection being diagnosed
     Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
     Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
     Interface type: Native WiFi
    Result of diagnosis: There may be problem
     Network Connection details from Command Prompt  (some info hidden for security reasons)
    Connection-specific DNS Suffix:
    Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
    Physical Address: ‎00-23-15-54-19-B8
    DHCP Enabled: Yes
    IPv4 Address: 192.168.X.XX
    IPv4 Subnet Mask: 255.255.XX.X
    Lease Obtained: Saturday, March 07, 2015 7:57:14 PM
    Lease Expires: Saturday, March 07, 2015 8:24:44 PM
    IPv4 Default Gateway: 192.168.X.X
    IPv4 DHCP Server: 192.168.X.X
    IPv4 DNS Servers: 75.75.75.75, 75.75.76.76
    IPv4 WINS Server:
    NetBIOS over Tcpip Enabled: Yes
    Link-local IPv6 Address: fe80::b8de:3ac9:e166:XXX%XX
    IPv6 Default Gateway:
    IPv6 DNS Server:
    Results of Ping and Trace Route in Command Prompt
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>ping 127.0.0.1
    Pinging 127.0.0.1 with 32 bytes of data:
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Ping statistics for 127.0.0.1:
        Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\Windows\system32>ping www.youtube.com
    Pinging youtube-ui.l.google.com [173.194.121.6] with 32 bytes of data:
    Reply from 173.194.121.6: bytes=32 time=24ms TTL=55
    Reply from 173.194.121.6: bytes=32 time=19ms TTL=55
    Request timed out.
    Request timed out.
    Ping statistics for 173.194.121.6:
        Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 19ms, Maximum = 24ms, Average = 21ms
    C:\Windows\system32>ping 74.125.239.34
    Pinging 74.125.239.34 with 32 bytes of data:
    Request timed out.
    Request timed out.
    Reply from 74.125.239.34: bytes=32 time=3286ms TTL=50
    Request timed out.
    Ping statistics for 74.125.239.34:
        Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 3286ms, Maximum = 3286ms, Average = 3286ms
    C:\Windows\system32>ping www.hotmail.com
    Pinging dispatch.kahuna.glbdns2.microsoft.com [65.55.157.204] with 32 bytes of data:
    Reply from 65.55.157.204: bytes=32 time=111ms TTL=237
    Request timed out.
    Request timed out.
    Reply from 65.55.157.204: bytes=32 time=1537ms TTL=237
    Ping statistics for 65.55.157.204:
        Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 111ms, Maximum = 1537ms, Average = 824ms
    C:\Windows\system32>ping 207.46.11.236
    Pinging 207.46.11.236 with 32 bytes of data:
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.
    Ping statistics for 207.46.11.236:
        Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
    C:\Windows\system32>tracert www.youtube.com
    Tracing route to youtube-ui.l.google.com [173.194.121.5]
    over a maximum of 30 hops:
      1    19 ms    13 ms    17 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    13 ms    13 ms    27 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net [68.85.192.205]
      3    20 ms    26 ms    21 ms  he-5-10-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.94.249]
      4    18 ms    34 ms    22 ms  he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
      5    19 ms    18 ms    18 ms  50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
      6    35 ms    18 ms    18 ms  209.85.249.217
      7    21 ms    19 ms    19 ms  72.14.233.93
      8     *        *        *     Request timed out.
      9     *     2509 ms   677 ms  iad23s25-in-f5.1e100.net [173.194.121.5]
    Trace complete.
    C:\Windows\system32>tracert 74.125.239.34
    Tracing route to nuq04s19-in-f2.1e100.net [74.125.239.34]
    over a maximum of 30 hops:
      1    54 ms    23 ms    12 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    22 ms    19 ms    17 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
      3    19 ms    19 ms    18 ms  he-5-14-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.166.121]
      4    18 ms    18 ms    18 ms  he-0-15-0-0-cr01.350ecermak.il.ibone.comcast.net[68.86.85.74]
      5    19 ms    18 ms    22 ms  50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
      6    22 ms    36 ms    19 ms  209.85.249.217
      7    26 ms    23 ms    25 ms  209.85.143.112
      8     *        *        *     Request timed out.
      9     *        *        *     Request timed out.
     10   972 ms     *        *     216.239.51.97
     11   148 ms    97 ms    95 ms  216.239.46.241
     12   324 ms   130 ms   432 ms  209.85.246.252
     13     *        *        *     Request timed out.
     14  1403 ms   101 ms   126 ms  nuq04s19-in-f2.1e100.net [74.125.239.34]
    Trace complete.
    C:\Windows\system32>tracert www.hotmail.com
    Tracing route to dispatch.kahuna.glbdns2.microsoft.com [65.55.157.144]
    over a maximum of 30 hops:
      1    13 ms    13 ms    25 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    13 ms    15 ms    13 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
      3    20 ms    19 ms    17 ms  he-5-13-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.145]
      4    17 ms    20 ms    20 ms  he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
      5    17 ms    18 ms    38 ms  as8075-2-c.ashburn.va.ibone.comcast.net [173.167.58.82]
      6    18 ms    18 ms    36 ms  ae4-0.ash-96cbe-1a.ntwk.msn.net [207.46.36.172]
      7     *        *        *     Request timed out.
      8     *     2191 ms    35 ms  ae0-0.atb-96cbe-1b.ntwk.msn.net [191.234.81.167]
      9     *        *        *     Request timed out.
     10     *        *        *     Request timed out.
     11    86 ms    84 ms    84 ms  ae4-0.lax-96cbe-1a.ntwk.msn.net [191.234.83.150]
     12    86 ms    86 ms    87 ms  ae9-0.by2-96c-1a.ntwk.msn.net [207.46.42.176]
     13     *        *        *     Request timed out.
     14     *        *        *     Request timed out.
     15     *        *        *     Request timed out.
     16     *        *        *     Request timed out.
     17    87 ms    84 ms    85 ms  origin.by173w.bay173.mail.live.com [65.55.157.144]
    Trace complete.
    C:\Users\C.Cunningham>tracert 207.46.11.236
    Tracing route to origin.by181w.bay181.mail.live.com [207.46.11.236]
    over a maximum of 30 hops:
      1    16 ms    16 ms    19 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    18 ms    13 ms    13 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
      3    21 ms    19 ms    21 ms  he-5-12-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.141]
      4    18 ms    21 ms    18 ms  he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
      5     *        *        *     Request timed out.
      6     *        *        *     Request timed out.
      7     *        *        *     Request timed out.
      8     *        *        *     Request timed out.
      9     *        *        *     Request timed out.
     10     *        *        *     Request timed out.
     11     *        *        *     Request timed out.
     12     *        *        *     Request timed out.
     13     *        *        *     Request timed out.
     14     *        *        *     Request timed out.
     15     *        *        *     Request timed out.
     16     *        *        *     Request timed out.
     17     *        *        *     Request timed out.
     18     *        *        *     Request timed out.
     19     *        *        *     Request timed out.
     20     *        *        *     Request timed out.
     21     *        *        *     Request timed out.
     22     *        *        *     Request timed out.
     23     *        *        *     Request timed out.
     24     *        *        *     Request timed out.
     25     *        *        *     Request timed out.
     26     *        *        *     Request timed out.
     27     *        *        *     Request timed out.
     28     *        *        *     Request timed out.
     29     *        *        *     Request timed out.
     30     *        *        *     Request timed out.
    Trace complete.
    Results of Intel WiFi Manual Diagnostics
    Test Name                 Test Result   Test Summary
    Hardware Test           Passed        Wireless Hardware is enabled
    Driver Test                 Passed        Diver is loaded. NETwNs64 Version 13.3.0.24
    Radio Test                  Passed       Radio is ON
    Scan Test                   Passed       There are 25 Networks available to connect
    Association Test        Passed       Associated
    Authentication Test   Passed       Authenticated
    Signal Test                Passed       Signal Quality: Poor
    Ping Test                  Failed          No Reponse: default gateway, DHCP server
    I hope this information is enough to get to the root of this problem once and for all.  Please let me know if you any other information such as event logs or statistics. 
    Thanks in advance.

    Results of Intel WiFi Event View Log (I deleted some lines since there were basically repeats of the same messages)
    #Event  Source  Time     
    Error Severity    Domain               
    User      Description
    45           EvtEngine           
    3/8/2015 20:40  Success               
    Connection         SYSTEM               
    iAMT - Failed to read Windows Events Log
    46           S24EvMon          
    3/8/2015 20:41  Information       
    AppDriver          
    SYSTEM               
    Getting List of adapters.
    47           S24EvMon          
    3/8/2015 20:41  Information       
    AppDriver          
    SYSTEM               
    Intel adapter(s) found.
    156         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
    157         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    ATC 06:1d:cf:2a:44:c0 xfinitywifi 6 RSSI=-88
    158         S24EvMon          
    3/8/2015 20:47  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:cf:2a:44:c0 xfinitywifi 6 CNCT_GENERAL_FAILURE
    159         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:cf:2a:44:c0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
    160         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
    161         S24EvMon          
    3/8/2015 20:47  Success               
    Driver    SYSTEM               
    RxAuthSuccess 06:1d:d5:d5:34:f0 6
    162         S24EvMon          
    3/8/2015 20:47  Success               
    Driver    SYSTEM               
    RxAssocResp 06:1d:d5:d5:34:f0 6 -77
    163         S24EvMon          
    3/8/2015 20:49  Information       
    TCP/IP  SYSTEM               
    VoIP: Got link down - deleting flows .
    164         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-88
    165         S24EvMon          
    3/8/2015 20:49  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
    166         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
    167         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-89
    168         S24EvMon          
    3/8/2015 20:49  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
    169         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
    170         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-90
    171         S24EvMon          
    3/8/2015 20:49  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
    172         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-82
    173         S24EvMon          
    3/8/2015 20:49  Success               
    Driver    SYSTEM               
    RxAuthSuccess 06:1d:d5:d5:34:f0 6
    174         S24EvMon          
    3/8/2015 20:49  Success               
    Driver    SYSTEM               
    RxAssocResp 06:1d:d5:d5:34:f0 6 -81
    175         S24EvMon          
    3/8/2015 20:50  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
    176         S24EvMon          
    3/8/2015 20:50  Information       
    Driver    SYSTEM               
    ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
    177         S24EvMon          
    3/8/2015 20:50  Success               
    Driver    SYSTEM               
    RxAuthSuccess 06:1d:d5:d5:34:f0 6
    178         S24EvMon          
    3/8/2015 20:50  Success               
    Driver    SYSTEM               
    RxAssocResp 06:1d:d5:d5:34:f0 6 -80
    179         S24EvMon          
    3/8/2015 21:03  Information       
    Driver    SYSTEM               
    RoamTrigger 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-81 MisBcn=8 RSSITh=-85 Roam Other Reason
    186         S24EvMon          
    3/8/2015 21:21  Information       
    General               
    SYSTEM               
    DeviceIoCtrlS24NDIS: (2) Failed to send OID 0xff100055 to driver. Error - 31
    187        
    S24EvMon          
    3/8/2015 21:21  Information       
    General               
    SYSTEM               
    DeviceIoCtrlS24NDIS - Dot11ExtNicSpecificExtension failed (31)

  • Questions on the ODBC database type

    We use a cloud based application, ServiceNow for Service managerment.  They provide an odbc 3.5 compliant driver which works outside of Data Services fine.
    I tried adding a Datastore for this choosing the 'ODBC' database type.  When I click [OK], it Crashed the Designer client !
    There are a lot of OBDC options in the advance properties and I tried turning some off, but so far it keeps crashing everytime I click ok.
    I assumed the point of the 'ODBC' database option was to provide limited support for this sort of thing.  Am I correct ? 
    The manuals state:
    The Data Services UNIX ODBC driver manager provides the option to load any ODBC driver library when the ODBC driver satisfies following:
    The ODBC driver is at least ODBC 2.0 compliant
    The ODBC driver library is thread-safe
    I assume the same is true on Windows (the manuals are very UNIX-focused)  ?

    yes, you can use ODBC datastore for this purpose, but this may not always work since different drivers have there own implementation and requirements
    you will have to findout if the issue is with ODBC Driver or with the DS, are you able to do a test connection successfully when creating a system DSN ?
    try enabling the ODBC trace and see where it fails when you click ok in DS

Maybe you are looking for

  • Implication of Duplicate Invoice check on Batch program

    Hello Experts, I am planning to change the message F5 - 117 in OBA5 for Batch from Warning to error. What will happen to the batch session when it encounters an duplicate invoice during posting? Please advice on the implications of making this change

  • Problem attaching physical drive to hyper-v

    I am running Hyper-V 2012 Core with several vms. I want to attach a physical drive to one of the VMs. It is a 500 GB NTFS basic, not dynamic, drive. It is not part of a RAID, though it is attached to a hot swappable RAID card. In Hyper-V I can see th

  • Purchase a subscription to Creative Cloud from Kazakhstan

    Hello! Wondering whether you can now buy a subscription for individual users (individuals) to Creative Cloud from Kazakhstan (https://creative.adobe.com/plans?plan=individual&store_code=kz&locale=ru, План Creative Cloud для фотографов | Adobe Creativ

  • How do I create a watermark for my website logo using Adobe Photoshop CS4?

    Hello!  I need help creating a watermark for my website logo using Adobe Photoshop CS4.  Thank You!

  • Lost files, have library

    I'm running Lightroom 1.3.1. On a Mac G5. I had all my files and the lightroom library on an external drive. That drive is dead, will not mount. I do have a backup of the library and I have backups of the files on another drive. What's my best course