Correct DPI Scaling after docking/undocking requires Logon/Logoff

Hi all,
I am using a Surface Pro 3, when at my desk, I dock it with a USB3.0 Dock connected to two 24" monitors via DVI. The desktop displays are 'standard' 24" 96dpi displays, while the Surface is running the 12" high-DPI display.
I don't have the Surface screen enabled while on the desk, so there is no need to have multiple scaling factors running simultaneously, but I just need Windows to dynamically respect the scaling factor of the Primary display - especially when the Primary
display changes.
When I logon to the Surface disconnected from the dock, I get the desktop nicely scaled to 150% and everything looks great. When I logon to the Surface while it's already connected to the dock, same again, everything stays at 100% scaling and looks
great on the desktop monitors. However, it all starts to go wrong when I dock/undock.
If I'm undocked at login and then dock, the 150% scaling factor gets incorrectly applied to the external monitors and everything looks large and blurry. Similarly, if it's docked at login, then I un-dock, the 100% scaling factor gets incorrectly applied
to the Surface screen and everything appears too small to read.
The only way I can find to fix it is to log out then log back in, this fixes the scaling factor for the current configuration.
However this is far from ideal, as I have to save all my work and close down all my applications to do this (so I lose chats, webpages, terminal session etc etc.)
Is there a way to force Windows 8.1 to re-calibrate the Primary display scaling factor WITHOUT having to log out and in again?
Thanks,
Seb

Hi,
It seems a known issue on Surface pro if you connect another monitor directly when you have logged into Surface.
Here are something you can try to check your issue:
http://www.microsoft.com/surface/en-us/support/music-photos-and-video/trouble-connecting-surface-to-second-screen
I suggest you contact the Surface pro support to feedback this and ask for further help.
Contact Microsoft Support for Surface
http://www.microsoft.com/surface/en-us/support/?productId=100411422
Kate Li
TechNet Community Support

Similar Messages

DPI Scaling on Multi-Monitor (Windows 8, 8.1)

Hi, I have two monitors, one internal and one external, configuration goes as follows:
MacBook Pro (Retina, 15-inch, Mid 2012) Native display/monitor
2880x1800px
15.4"
221 PPI/DPI
Detected by Windows as: "Generic PnP Monitor"
LG D2343P External Monitor
1920x1080px
23"
96 PPI/DPI
Detected by Windows as: "LG 2343(Digital)"
I want to make both displays to work together with different "DPI Scaling" on Windows 8.1 Pro Preview so GUI elements render correctly scaled between them just at it happens on Apple OS X, I have read an excellent article which shows how to change and customize this settings but settings apply over all displays and there isn't a way to make windows know the DPI/PPI of the Retina monitor.
http://www.eightforums.com/tutorials/28310-dpi-scaling-size-change-displays-wind ows-8-1-a.html
How can I achive this?

Hello. I have the same setup - Windows 8.1 on Macbook Pro Retina and Thunderbolt display.
What I've noticed is that in the device manager both the Thunderbolt display and the Macbook screen show up as "Generic PnP Monitor," and I am wondering if these generic device drivers are not passing the correct resolution/screen size informations to the OS.
Maybe Apple can create customized drivers for each one of their monitors instead of using the generic driver?

Change DPI scaling inside RDP session (2008 R2 / 2012 R2)

We have two servers:
Server 2012 R2 RDS
Server 2008 R2 RDS
Users are constantly reporting being unable to change their screen resolution. After some digging, the reason they're trying to change the resolution is because their text is too small to see. DPI scaling is obviously the answer, but when users go into the
setting it is greyed out and cannot be changed.
Now, for Server 2008 R2, I've found this link:
http://support.microsoft.com/kb/2726399/en-us
Does this hotfix actually do what I suspect/hope/blindly-pray it will do? Does it re-enable the DPI options if connected via RDP? The article doesn't actually say what it does, just that it will "fix" the issue.
Next, for Server 2012 R2, I've found this link:
http://blogs.msdn.com/b/rds/archive/2012/06/13/remote-desktop-services-what-s-new-in-windows-server-2012-release-candidate.aspx
The second last section mentions "Support for Changing DPI in Remote Sessoins." Having logged into this RDS server, this is not the case, the setting is greyed out just like in Server 2008 R2.
What needs to be done to get this working on both platforms? My end result is I want users to log in and be able to go into the preferences, move the DPI slider to their desired text size and fix their problem without resorting to workarounds like decreasing
the resolution of their local PC to increase the apparent size of text.
If this isn't possible, is there a way to configure RDS to run at a lower resolution permanently but to stretch to fit any screen resolution? Right now, if you drop the resolution on an RDP session, it just takes up part of the user's screen. In the newest
RDP clients, I notice the Smart Sizing option, but it apparently isn't "smart" enough to stretch higher than the base resolution of the session.
I've looked through literally years of forum posts and articles and nothing seems to point at a user-friendly fix such as take the slider, choose your size, done.

Hi,
For Windows Server 2008 R2, you may need to apply the Hotfix in your post.
The DPI adjustment is not available in a Remote Session (RDP)
http://support.microsoft.com/kb/2544872
You cannot change the DPI setting through a Remote Desktop session on a computer that is running Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2726399/en-us
However, when I remote to a Windows 8, Windows Server 2012 and Windows Server 2012 R2 machine, I have no such issue.
Please check if your clients have the latest update for RDP installed.
Resolution and Scaling Level Updates in RDP 8.1
http://blogs.msdn.com/b/rds/archive/2013/12/16/resolution-and-scaling-level-updates-in-rdp-8-1.aspx
Description of the Remote Desktop Protocol 8.0 update for Windows 7 SP1 and Windows Server 2008 R2 SP1
http://support.microsoft.com/kb/2592687
Remote Desktop Protocol 8.1 Update for Windows 7 SP1 released to web
http://blogs.msdn.com/b/rds/archive/2013/11/12/remote-desktop-protocol-8-1-update-for-windows-7-sp1-released-to-web.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

Developing on a 4K Monitor - problem with DPI Scaling

Development Environment:
Visual Studio 2013 Update 4
Windows 8.1 latest SP
1st screen: 4K, 3840x3260
2nd screen: 1920x1200
Situation: I'm developing a WinForms Application since many years. Originally, my development environment was started on normal screens. Now, the main screen was exchanged by a 4K.
Problem: Whenever I design a dialog, or change an existing one, the resulting dialog is much too big on a normal FullHD display. It seems that Visual Studio cannot correctly the DPI scaling;
end the forms designer even "destroys" existing code once you open a dialog.
Question: What's the best way to develop WinForms desktop applications on a high-resolution display?

So, I messed around a lot more with switchresX, and discovered you can create any retina resolution by making a custom 'scaled' resolution with double the dimensions in each direction. For example, 1440p turns into 5120x2880.
The caveat here is that you can't set the actual screen resolution. So, for my rMBP, 1440p gets scaled to 1080p and looks like garbage. I'm fairly convinced that this is something that's determined by the driver though. I attached the monitor (Asus p287q) to a Mac Pro with an nvidia graphics card and using the nvidia web drivers (not the default ones that come with mac os x), and the 1440p on 4K HiDPI mode is available and looking great (60hz too!)
I haven't tried this yet, but maybe installing the nvidia web drivers will fix the rMBP resolution as well. Thing is, the Macbook Pro 13 has Intel graphics, right? Not sure if Intel offers alternative mac drivers, but if they do it's probably worth a try.

WRT54G, Firmware Version: 8.00.2, Stops routing after a day, Requires Power Cycle to Work Properly

WRT54G, Firmware Version: 8.00.2, Stops routing after a day, requires a quick 10-15 second power cyc... work properly for a day or so before powering down again….
I was using for years the BEFW11S4 Model without any issues before it finally failed. Due to loyalty, I went out over a month ago to purchase the current model. The problems did not pop-up until month of December… The issue had me thinking at first was the internet connection…
Any advice on dealing with this issue… Is it a Software and/or Hardware? It appears to be a software related condition…
For those other WRT54G users that appear to be having similar issues, regardless of the firmware, it would appear we all seem to be facing the same condition of resolving the issue after a power cycle…
Is there anyone out there that has already resolved this issue (e.g. Configuration changes)? Does anyone have input that Linksys is actively working on this issue?
Although I am sure we will find a solution, having to cycle the power is a bit disappointing since my older model had no such flaws with my current internet connection…
Thanks for the support out there….

If you have an Intel wireless card you can try this. I came across this link on the forum a days ago and it seems to help. The problem is that my problem was much more intermittent than some people are experiencing. It mainly seemed to appear when undocked the computer or if there was a power outage during the day. I would be interested to see if it works for you or if I'm just chasing my tail. I've seen other suggestions for changing the thresholds in the router which may be related.
http://www.intel.com/support/wireless/wlan/sb/cs-006205.htm

Windows 8.1 DPI scaling issue's [how to disable it]

I'm having trouble with new the DPI scaling features of windows 8.1.
I have 2 displays of the same resolution (1920 x 1080) . The main display (24") is bigger then my laptop display (17"). I don't want to use different scaling for each display => I just want both to be 100% (small).
So I've set up "Control Panel\Appearance and Personalization\Display" to be "Smaller 100%" and I've checked 'Let me choose one scaling level for all my displays'.
Once choosen these settings; and saved I logged out and everthings seems fine.
Only IE11 is being an ass switching from 100% zoom factor on my main display to 125% zoom factor on my secondairy (smaller laptop display). I found this about IE 11:
http://connect.microsoft.com/IE/feedback/details/804990/internet-explorer-11-auto-zoom-feature-within-ie11 ; which makes me believe this is an issue's which will be solved in the future.
However somethimes when I log on (not every time - but sometimes ~ like this morning) ; the DPI scaling kicks in on my secondairy laptop display. A windows suddenly grow bigger when dragging them to my smaller display. This is very annoying behaviour.
Sample Image (see difference in size CMD windows) :
I have tried using different settings; none of them seem to support the behavior I want to have.
I can disable the DPI scaling (foreach application) by checking the Compatibility option "Dsiable display scaling on high DPI Settings". However if I need to do this foreach application, I could as well reinstall my PC and install Windows 8 again
Kind Regards,
Sander

Today i have the same strange issue. This occures with and normal EXPLORER window. The strange thing is it occures on one explorer window, when i open a new one this one doesn't have this issue.
See printscreen attached:
Is it possible the display settings are user dependent ; and with UAC disabled some applications automatically run as "Administrator" which run under different user settings?
Kind Regards,
Sander

Make Skype work properly with Windows DPI scaling for high resolution displays

Hello, As of now, Skype does not work well with Windows DPI scaling. Everything looks fuzzy (fonts, icons, etc).Microsoft's recommendation is to turn off the DPI scaling ( http://support.microsoft.com/kb/2900023 ) but in this case, the text is too tiny to be read. Basically everyone with a high resolution display is stuck with either tiny of fuzzy fonts, making Skype unusable. It's really a pity because other Microsoft programs such as Office work perfectly with Windows DPI scaling, and Skype also looks great on Mac with Retina display. With high DPI displays becoming more and more common, this is a must have feature. Thanks for reading!

pokegwa wrote:
Hello, As of now, Skype does not work well with Windows DPI scaling. Everything looks fuzzy (fonts, icons, etc).Microsoft's recommendation is to turn off the DPI scaling ( http://support.microsoft.com/kb/2900023 ) but in this case, the text is too tiny to be read. Basically everyone with a high resolution display is stuck with either tiny of fuzzy fonts, making Skype unusable. It's really a pity because other Microsoft programs such as Office work perfectly with Windows DPI scaling, and Skype also looks great on Mac with Retina display. With high DPI displays becoming more and more common, this is a must have feature. Thanks for reading!It's been two years actually. As you can see Skype is really broken on HDPI displays and the issue is still being ignored/unacknowledged by Skype devs.

MRP isn't including Reciept Reservation(debit) after the last requirement

Hi,
I have a situation in MRP.
We have defined negative component (A)quantity in production order. The reciept reservations ( movement type -531, debit indicator set, movement allowed set on release) is created for this component. But in some production orders same component is defined with credit indicator which creates issue reservation (261).
Hence in MD04 component A has both receipt reservation and issue reservation.
Problem :
When run MRP(MD02), net requirement calculation includes all reciept reservations before the last reuirement. But It doesn't include any receipt reservation which is after the last requirement.
09/23/08 Stock 100 100
09/23/08 SafeSt 5- 95
07/14/08 OrdRes 2- 93
07/14/08 OrdRes 16- 77
07/14/08 OrdRes 8- 69
07/14/08 OrdRes 16- 53
07/14/08 OrdRes 24- 29
09/08/08 OrdRes 20- 9
09/22/08 OrdRes 16- 7-
09/22/08 OrdRes 2- 9-
09/22/08 OrdRes 16- 25-
09/22/08 OrdRes 2- 27-
09/24/08 OrdRes 16- 43-
09/24/08 OrdRes 2- 45-
10/07/08 Pl.ord 27 18-
10/07/08 Pl.ord 18 0
10/16/08 OrdRes 8 8
10/16/08 OrdRes 8 16
I checked if there is any possibilities in Rescheduling Check Config, but receipt reservation is not the part settings.
Please Advise.
Cheers
PK

Yes! Calculation is right in MD04 as shown in above message. The requirement is MRP should include every existing receipt reservation wether it's availability date is in past or future. All past reservations are included in MRP calculation but not the future one OR any receipt reservation which exist after the last one requirement.
9/24/2008     Stock     0     0
9/22/2008     OrdRes     1     1
9/22/2008     OrdRes     3-     2-
9/24/2008     OrdRes     2     0
12/3/2008     PurRqs     2     2
In this example;
Issue reservation - 9/22/2008      3-
recept reservation -   9/22/2008       1
recept reservation -   9/24/2008      2
Available Stock     -                       0
MRP skipped Reservation (9/24/2008 OrdRes 2) because its availability date is after the 9/22/2008 and created purchase requisiton for 2.
Requirement is "system should include all reservations in net requirement calculation" either its before requirement or after requirement.

Windows 8.1 DPI scaling and remote desktop issues

On my desktop display (2560*1080 21/9 display) I am using no DPI scaling. (100%)
When I remote into this machine from my Surface Pro tablet the display changes to 1920*1080 to fit the surface's display and scaling also kicks in. (125%)
When I afterwards login to the main machine directly, scaling is completely off. Large text and headers in explorer and small icons. Any way to fix this issue ? Loging off and back on fixes it but usually I'd like to keep the user logged on so my programs
keep on running.

If you change the scaling to 100% while logged in over RDP, then disconnect or log off, does it stick?
I had to grin just a bit... Microsoft has been touting the integration of their tablets and yet last time I remoted into my Windows 8.1 desktop workstation from my
iPad using a free RDP app It just kept the monitor 1 display size (1600 x 1200) and didn't mess at all with the desktop settings.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Adobe Acrobat 8 Professional does not accept the correct serial number after reinstallation

Adobe Acrobat 8 Professional does not accept the correct serial number after reinstallation, what to do?

Thank you Bill. You could help me with the answer and the one in the other forum:
"Acrobat has a separate installation process and needs to be activated with your Adobe ID I think. The question on CC is really one for the folks in the CC forum (Adobe Creative Cloud), not the Acrobat forum".
I could resolve things with Adobe CC. I don´t need my old Acrobat 8, but I could finally install Acrobat XI Pro - and this time it seems to work, without permanently crashing down.
Thank you.

Adobe Acrobat 8 Professionals does not accept the correct serial number after reinstallation

Adobe Acrobat 8 Professionals does not accept the correct serial number after reinstallation, what to do?

Moved to Acrobat Installation & Update Issues

Correct syntax to make a field required

what is the correct syntax to make a field required
i assumed it would be like setReadOnly(true); but its not.
i searched the forum and got only 1 hit that shows leaf.setRequired(UIConstants.REQUIRED_YES); i tried this it didnt work
i am doing this.
OAMessageTextInputBean po = (OAMessageTextInputBean)webBean.findIndexedChildRecursive("PurchaseOrder") ;
po.setRequired(true);
couldnt find nothing in the manual neither. wheres the mistake in the example.
cheers
Edited by: s-man on Oct 15, 2008 1:55 PM

i did as suggested multiple ways it runs but when create button on page 1 is hit to go to page 2 i get the error page w/ the same error below the code
any other suggestions or is a problem sticking out.
i tried these options
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
OAMessageTextInputBean et = (OAMessageTextInputBean)webBean.findIndexedChildRecursive("EtChoice") ;
et.setRequired("true");
Or
OAMessageTextInputBean et = (OAMessageTextInputBean)webBean.findIndexedChildRecursive("EtChoice") ;
et.setRequired("yes");
Or
OAMessageTextInputBean et = (OAMessageTextInputBean)webBean.findIndexedChildRecursive("EtChoice") ;
et.setRequired("no");
Error Page
Exception Details.
oracle.apps.fnd.framework.OAException: java.lang.ClassCastException
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:544)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:244)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:920)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1536)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:866)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:833)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:575)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:244)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:363)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:866)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:833)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:575)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:244)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:330)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2121)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1562)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
     at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
     at OA.jspService(OA.jsp:45)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
java.lang.ClassCastException
     at uaboaf.oracle.apps.xxuab.hr.orghierarchy.webui.manageOrgCO.processRequest(manageOrgCO.java:50)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:518)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:244)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:920)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1536)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:866)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:833)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:575)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:244)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:363)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:866)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:833)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:575)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:244)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:330)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2121)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1562)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
     at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
     at OA.jspService(OA.jsp:45)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
java.lang.ClassCastException
     at uaboaf.oracle.apps.xxuab.hr.orghierarchy.webui.manageOrgCO.processRequest(manageOrgCO.java:50)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:518)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:244)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:920)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1536)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:866)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:833)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:575)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:244)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:363)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:866)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:833)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:575)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:244)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:330)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2121)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1562)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
     at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
     at OA.jspService(OA.jsp:45)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)

How do I turn off high DPI scaling in AE CC 2014?

I just downloaded the latest AE update and noticed that all of the screen elements are huge! As a MAX attendee, I understand that this is the high DPI scaling built in for the new high resolution screens. My laptop monitor is fairly high resolution, but the scaled up display looks ridiculous on it. I would love to go back to a 72 DPI display, but do not see an option for that, unlike Photoshop. Is it possible to go back to a non-scaled display?
-Eric

Thanks. Changing the scale to 100% worked, but it made everything else small. Guess that will take some time to get used to.
Any plan to give the user the option to turn on and off the high DPI scaling with PP and AE? Similar to what is being done in PS? That would be my preference.

DPI Scaling in Windows 7 and how it affects Adobe apps (Retina 15" MBP)

Hi guys,
I have a simple question I cannot find the answer for, I want to know if the DPI settings in windows ( http://windows.microsoft.com/en-US/windows7/Make-the-text-on-your-screen-larger-or-smaller) that scale text and icons only scale the UI elements in Adobe programs. For example if my Retina MBP on Windows 7 is set to 150% DPI and all the text and Icons appear bigger is that the ONLY thing affected? Does an app like Photoshop or Illustrator still allow me to work with the full 2880x1800 canvas size, only the UI elements get scaled?
I do not want to set the DPI to 150% and not be able to use the whole working space of the monitor, the whole reason I bought the Retina MBP was to do large poster designs and view them at 100%. Since Apple only allows 1900x1200 with 2x sampling for the Retina display, it's essentially useless as I don't need more detail when I zoom in, I want more working space overall at a 1:1 ratio.
tl;dr: What does the DPI scaling setting in Windows actually scale?

Thats not true, absolutely not. You are right to ask here in the forum, but there is no solution for HiDPI scaling for photoshop. Please see the link below. Adobe is doing it´s best to get a solution. But this will take tiiiiiiime.
See this link and see how helpless adobe is with their software. Its a shame:
http://forums.adobe.com/message/6126160#6126160

Issue: Windows 8.1 - DPI Scaling

I want to know if there is a way to disable auto scaling on start screen in windows 8.1. My laptop does not have a touch screen, so this scaling is useless for me and it get worse when I connect my laptop into my TV, the Tiles on my screen get even bigger
that it already are.
Normally on my laptop I can use the option show more tiles, this options enables 6 rows of tiles, but I don't know why on my TV this option doesn't have any effect and the start screen and it shows only 4 rows of tiles.
My TV is a Sony 42" Full HD and my laptop a Sony Vaio SVS 15.
This is on the Laptop:
and this on the TV:
Irauan Lage

Hi,
We can try to configure this setting: under Control Panel\Appearance and Personalization\Display
Please check on "Let me choose one scaling level for all my displays" option.
This setting determines whether the automatic DPI-scaling of Windows 8.1 is enabled or not. If the setting is unchecked, Windows will automatically select scaling values for each display the PC is connected to.
For detailed information about what is changed on Windows 8.1 DPI Scaling, you can refer to this article:
Windows 8.1 DPI Scaling Enhancements
http://blogs.windows.com/windows/b/extremewindows/archive/2013/07/15/windows-8-1-dpi-scaling-enhancements.aspx
Hope these could be helpful.
Kate Li
TechNet Community Support

Correct DPI Scaling after docking/undocking requires Logon/Logoff

Similar Messages

Maybe you are looking for