Correct entry for /var/run/slapd.pid
what is the correct pid for slapd?
my os x did not come with slapd.pid so I'm
trying to create one manually, but I don't
know what I'm supposed to use.
also any one know the correct entry for
/var/run/slapd.args?
Thanks,
Tadashi
what is the correct pid for slapd?
my os x did not come with slapd.pid so I'm
trying to create one manually, but I don't
know what I'm supposed to use.
When slapd is running it saves its pid in the file /var/run/slapd.pid
This allows other processes to find its pid to use to communicate with it.
You do not need to create this file.
also any one know the correct entry for
/var/run/slapd.args?
Similar to above, this is created by slapd. You don't need to worry about it.
The better question is why is slapd not running (assuming your machine is set up to be an OD Master).
HTH
- Leland
Similar Messages
-
/var/run/gdm.pid doesn't exist, perhaps GDM isn't running
/var/run/gdm.pid doesn't exist, perhaps GDM isn't running
I'm getting this message when I'm trying to turn off deamon manualy. There is a file in /var/run/ called gdm.pim . It's started after gnome upgrade. What's wrong with this ?
Thanks for your helpRokixz wrote:
/var/run/gdm.pid doesn't exist, perhaps GDM isn't running
I'm getting this message when I'm trying to turn off deamon manualy. There is a file in /var/run/ called gdm.pim . It's started after gnome upgrade. What's wrong with this ?
Thanks for your help
Same problem here. -
After Crashing my System with the kernel Update Yesterday, I set up a new clean Installation. I got now this error message at the start up screen.
Failed to start message bus : The pid file "/var/run/dbus/dbus.pid" ...
I don't understand what I have to do!
Last edited by JaDa (2007-08-24 03:02:12)Doehni wrote:I think this could be a problem with the order your daemons are started. Is dbus already started by another daemon before this message comes?
@Doehni
You give me the Idea! Thank's a lot
no how I solved the problem
vi /etc/rc.conf
before
DAEMONS=( hal dbus ........)
then changed to
DAEMONS=(...... dbus hal ......)
and the problem was solved
Last edited by JaDa (2007-08-24 03:09:05) -
Correction entries for Incorrect Profit center Assignment
hi,
I am having an issue where the user posted a document using wrong Costcenter assignment in FB60(which in turn is assigned to a profit center). please help me out the procedure or entries to be done so that it reflects the costs in correct cost center and profit center. Would appreciate if you can suggest me the entries to assign to the correct profit center where some postings go to Dummy profit center.
Will reward points for your answers.
Thanks in Advance.Use Manual Repostings T-code KB11N
-
GW POA Can't write .pid file to var/run/novell/groupwise
I'm running GW 8.0.2 HP2 on SLES 10, and just recently figured out after trying to set up a CRON job that I can't restart my POA without rebooting the server. When I run a rcgrpwise status, the POA shows as "unused." Running rcgrpwise stop or restart fails to stop the POA, though the domain goes up and down with no issue. I've checked my gwha.conf file, and everything appears to be in the correct case, and referencing the correct locations. The domain can create its .pid file in /var/run/novell/groupwise just fine.....
I've read and followed the directions in the tid 7003322 (which sounded like a direct match for this issue), but when I edit the header for the POA an rcgrpwise status returns that it is "unable to check [@gw4post.poa]"
The forum thread titled: "rcgrpwise status shows "unused", but it is running." also sounds like the same problem, but there was no resolution.
Anyone have any ideas? Please let me know if I can provide any further informnation - I'm writing this at 0-dark-30 and probably left something out....
Thanks,
StaceyOkay, so your stuff looks good.
Yes, when the system boots it's supposed to basically load/fire up the rcgrpwise script (more or less, but it reads the gwha.conf file)
That is quite odd that if you bounce the server, it's fine.
Greg is correct that the PID file(s) get written to the directory where your log files are at.
Do you know where you log directories are at for the MTA/POA?
They should be in diff. directories.
Brief section from the docs:
If you selected Launch GroupWise Agents on System Startup in the Installation program, the Installation program configured your system so that the agents start automatically each time you restart your server. The Agent Installation programs always creates a grpwise startup script in /etc/init.d for starting the agents, as described in Starting the Linux GroupWise Agents as Daemons. To enable automatic startup, the Agent Installation programs also create symbolic links named Snngrpwise in the rc3.d and rc5.d directories so that the agents load on restart into level 3 or 5, depending on the configuration of your Linux system. The value of nn is determined by the chkconfig command during installation so that the GroupWise agents are started in the proper sequence with other processes running on the server.
When the grpwise script runs and starts the GroupWise agents, the agents read the agent startup files in /opt/novell/groupwise/agents/share to check for configuration information provided by startup switches. Because the --show switch cannot be used in the startup files, the agents do not run with server console interfaces when started automatically when the server restarts, unless you modify the gwha.conf file as described in Enabling the High Availability Service for the Linux GroupWise Agents. -
In need of help figuring this phone stuff out! I am trying to get all the apps from my husbands old phone to his new one. I have already backed up the old phone and got everything onto iTunes, but every time I plug the new iPhone 5s into my computer it says that the version of iTunes is not correctly localized for this language and asks for me to run the English version. I have no idea how to do that? Please help.
Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy -
my laptop will not open iTunes, as it just says 'This version of iTunes has not been correctly localised for this language. Please run the English version'. I have not synconised my iPhone 5S or iPad 2 with iTunes for well over a year. I noticed the music which had previously been put into iTunes has dissappeared from my phone and iPad. I also want to remove some movies from my iPad and iPhone and there is no way I can do this without being able to manually sync with the Laptop which is running windows 7. Has anyone else come across this and please can you help? I am no expert in fact I know very little about the Laptop, it is my Husbands baby but he doesn't understand anything to do with Apple including iTunes. I will need any advise explained step by step please.
Hi Shelady,
Try downloading and reinstalling the latest version of iTunes from the first link below. If that doesn't do it, the suggestions in the second article should resolve the installation issue.
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
-Jason -
My iTunes will no longer download.
All of a sudden I get the message "This version of iTunes has not been correctly localized for this language. Please run the English version".
How do I fix this and run the English version again? .Start by trying to repair iTunes from the programs and features control panel.
Otherwise, for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I did a system restore, trying to get rid of the new update (which I HATE), and now when I try to open iTunes, I get an error message telling me that "This version of iTunes has not been correctly localized for this language. Please run the English version." You can't change the language option unless you can open iTunes - and IT WON'T OPEN!!! What a piece of crap! If there existed an iTunes substitute, I would purchase it in a hot minute!
Strip it out and start again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you really want to roll back to 11.4 uninstall all iTunes/Apple components as described in the second box, restore the pre-upgrade version of the library as described in Empty/corrupt iTunes library after upgrade/crash, then download and install from one of these direct links:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
tt2 -
I have iTunes running on my Windows8 desktop for some while with no problems. Yesterday I purchased a song, deleted a free game app. and upgraded to the most current version of iTunes. This morning I could not pull up iTunes, so I retored my iTunes to a setting two (2) days ago. Now, as soon as I try to start iTunes I get a message stating: This version of iTunes has not been correctly localized for this language. Please run the Enclish version OK. So I hit the OK button and nothing happens. Please help.
Hi there GloriaNM,
You may want to try removing and reinstalling iTunes as an initial troubleshooting step. Take a look at the article below for more information.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
-Griff W. -
Trying to open iTunes - get an error message saying "This version of itunes has not been correctly localized for this language. Please run the english version" Saw other answers for windows users, I have a MacAir. never used any other language but English so I have no clue what the problem is. I just want to update my phone and back it up.
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now? -
Looking for some help. I am trying to open itunes and I keep getting an error message saying "This version of itunes has not been correctly localized for this language. Please run the english version"
Can anyone help.Hi there nisbetk,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
-Griff W. -
I can't open i Tunes. Message: This version of i Tunes has not been correctly localized for this language. Please run English version.
Why did this happen and how do I correct so I can open and use i Tunes again?please disregard my question.... I just re-installed I-tunes and it works again...
-
Can someone please tell me what I need to do. My Itunes won't open up. A window pops up saying that this version is not correctly localized for this language please run the english version.
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now? -
itunes won't open it gives a message saying "this version of itunes has not been correctly localized for this language. please run the english version" i have a large library
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?
Maybe you are looking for
-
Mac Bootcamp cause lossage in hard drive space
I was trying to install windows on my mac using bootcamp, but because the process took way too long, i deceided to stop the process. My hard drive is approximately 700-800 GB and the space I actually use is about 200-250 GB but it is saying i use up
-
I need to install reader on an old (Win2K SP2) PC w/ no internet access.
I need to install reader on an old (Win2K SP2) PC w/ no internet access.
-
When trying to view youtube I get this message"an error occured loading this content" any ideas why?
When I try to view YouTube content I get the message "an error occured loading this content." This did not happen until recently. Any ideas why?
-
How to move track layer in timeline so all keyframes move together?
Hi all, I have a simple project with various text layers moving up from the bottom and gently landing in position. There is also a style face blur going on so the text starts out blurred and becomes clear as the text lands. As I duplicate a layer in
-
Smartform table with event tab
hi generally in tables there will be caluclations tab. iseen a diff table in standard form with a table and insted of caluclation its having a event tab. whats that whats the use. how to create? thanks & regards p kavi