Correct FCE 4 Output for Blu Ray

Hi,
First post here...
I'm having a tough time figuring out how to export a finished HD project (made from AVCHD files) in a file format suitable for burning onto a blu ray disk (using Toast 9.0).
Do I export as AVI, QT Movie, MPEG-4?
Thanks!

Thanks for these replies.
I've notice that when I export from FCE to MPEG-4 the video looks terrible in Quicktime. Is this normal? Video exported in H.264 looks pretty good, but is a bit choppy. Will this choppiness go away once burned to a disk?
If it's so hard to get Blu Ray disks burned on a Mac, what's the point of being able to edit and export HD video?
Is there another way to get my rendered HD video from FCE onto my TV for family viewing? I'm not wed to a blu ray disk, I just thought that was the only way to get HD movies from FCE to my TV.
Thanks,
Brian

Similar Messages

  • Analog outputs for Blu-ray players

    I'm not even sure if you can play a Blu-ray on an analog TV, but the internet features are usable, if you could display them. I know HDMI to RCA adapters can be purchased, but why make the consumer have to buy them. MANY people still have analog televisions. I think a large market is being missed. I use my Blu-ray players for the internet functions a lot more than I play discs.Also, many people still have analog stereos and can't output the sound. I know some players have coaxial outputs, but older stereos can't use them.It's going to be a long time before everyone has digital TV's and stereos. If these units had RCA video and audio, they could still have use for a Blu-ray player.

    Hi
    I saw your question and was wondering if 4 months later you had found out any useful information about the BDP-S780 connectivity to any TV.  Info about the webcam/video camera to connect to it would be equally useful.  Thanks.
    JFB from Italy 

  • Can we change the quality of the output for Blu-Ray?  & 6 Channels Audio output?

    I'd like to know how to change the quality of the output of a BD.  'cause i am using an untouched m2ts from a BD which has two audio tracks(encore recognise only one).  The bitrate is 30Mbit + but the output is like 3 Mbit.  What am i doing wrong?
    And how to output a 6channels audio?
    Thanks for any help!

    I am confused on your workflow here. It seems that you are Importing material that is already in fully BD-compliant form, but then are Transcoding again?
    Can you step us through the exact Assets that you are working with, and the steps that you are taking with those Assets?
    Also, if you have a muxed MPEG source file, I would rip it to the elemental/elementary streams, as Encore has some issues with muxed MPEG source files. Also, you will want to rip the two Audio streams, and Import those separately. These Assets should show Do Not Transcode, if they are 100% BD-compliant. If they do not, you should be able to force Encore to NOT Transcode them, so the quality should match that of the Imported files exactly, and no more work should need to be done. Remember, that is if they ARE 100% BD-compliant - very important.
    If you already have your dual-Audio streams, you will not need the SurCode DD 5.1 SS encoder plug-in, in this case, as that encoding has already been done, or at least I think that it has been done.
    Good luck, and we'll be looking for details on your workflow,
    Hunt

  • How do I determine correct media encoder settings for Blu-Ray

    I am successfully producing Hi Def Blu-Ray disks by using one of the presets available in Premiere media encoder. Actually using the HDTV 1080i 25 High Quality setting. They playback in beautiful high definition but I think I was just lucky. I would really like to know what determines the setting I should use.
    1. I live in Australia so I assume PAL.
    2. My camera is a Sony HDV. HCR HC9 1440 x 1080i. I assume this is irrelevant to export encoding settings for Blu-Ray.
    3. The export encoder preset has field order set to Upper. I would have thought I should either match the project settings which is interlaced to match my camera and project. OR more likely I should match the audience TV which would be a widesceen plama or LCD TV. I dont know if these TVs are interlaced or progressive. OR is it more a question of what field order the Blu-Ray player expects me to send on the disk?
    4. I will play on a TV 1920 x 1080 pixel capable and on slightly lower resoultion widescreens. The encoder preset is for 1920 x 1080 so I assume that's ok for all widescreen TVs even lower definition ones.
    As you can tell I am a learner. Any suggested links to basic reading on the subject would help me.
    Robert
    PS Put this item in wrong forum previously.

    Since no response I've been searching and found the following.
    When encoding to make a Blu-Ray disk from my HDV 1080i footage:
    1. Tell encoder the source is 1080i That is interlaced and it's TOP field first for HDV footage.
    2. Tell it to encode to 1440 x 1080 resolution. You could tell it 1920 x 1080 but it will take much longer to encode. Will be good but why bother. All BD players will automatically up the 1440 to 1902 full screen.
    3. Beware, not all players support BD-R and BD-RE recordable disks.
    Seems Panasonic is good. Samsung probably good. Sony and Sharp probably not able to read (yet).
    4. All players read MPEG-2 compression and H264 compression. Use a bit rate of 25 Mbps for MPEG-2 encode or 18 Mbps for equivalent result in H264 encode. Can use higher rates. These are minimums for a very good result
    5. One pass encode is pretty damn good but use two pass if you have the time to wait for the encode.

  • Output to Blu-Ray and Audio from Gaming videos.

    Just a simple questions, does premiere pro allow output as Blu-Ray. I have a series of home movies, I want to produce as Blue-Ray and all I can find is only DVD publishing.
    On another issue, I am trying to create a video of online gaming that I play and the clan I belong to play to promote the clan, I have some footage from Arma 3, War Thunder, however with my Rust game the audio is very slow. How do I correct this,  Would the video resolution affect the audio. I use Bandicam to capture my online gaming footage which is outputted as AVI file.  This plays well in Windows Media Player, Realplayer, and PowerDirector (Does Blu-Ray 3D).  I have been told by quite a few clan members that premiere pro was a good video editing software so I wanted to try and see for myself seeing I have a complete Creative cloud Subscription.
    Video informations is as follows:
    codec MPEG 1   Resolution: 1912 x1060 @ 30fps
    Audio is MPEG -1 Layer 2 48000Hz @192 kbps Monophonic
    Codecs are installed.
    The audio, almost sound as thought I am speaking in game in slow motions,  I have tried to increase the speed, got as far as 500% which is still too slow.  I am new Premiere Pro.
    It would be greatly appreciated if someone could assist me with this.

    Premiere Pro BY ITSELF will not create DVD or BluRay... you may export files for authoring in EncoreCS6, which is a separate download... go to the bottom of page #5 at The PPro/Encore tutorial list http://forums.adobe.com/message/2276578 for more information on using PProCC with EncoreCS6
    Capturing gameplay is often problematic... try this Free Open Source software http://camstudio.org/ -use with Lossless Lagarith http://forums.adobe.com/thread/875797

  • Render settings for Blu-Ray in the UK

    Hi all,
    Bit of a newbie question regarding render settings for Blu-Ray. If I understand correctly, the uk frame rate is 25fps???? And we generally have 1080p TV's etc??? The Blu-ray presets in Media encoder don't offer this and the fact they don't makes me question if I'm not understanding the required settings correctly. ME does offer a 25fps preset but only in 1080i. So, my question is, what should I be rendering to, to then take the rendered file and author it to play on UK blu-ray players. Incidentaly, does anyone have any recommendations on authoring software. I just need to break it down into several seperate categories as well as being able to play the entire movie so the budget is minimal.
    Many thanks for your help.
    SJ

    Hi, I'm using Mac Blu-rayRipper Pro and iMedia converter as well as Handbrake to get the highest quality transfer from my Blu-ray disks to iTunes and AppleTV. Each disk is a bit of a project as no two are the same in terms of the best method of conversion.
    I've put a few details in my blog post on getting Blu-ray to work on my Mac Pro in the UK. Was a bit of an epic journey in the UK as we don't have all the options available in the USA:
    http://www.theapplechap.com/TheAppleChap/Blog/Entries/2010/6/20Getting_the_most_out_of_Blu-ray_on_aMac.html
    I also posted a short series of articles about getting the best possible movie conversion in iTunes covering subtitles, metadata and SD-HD tagging. May help so here's the link (to the first one, there are 3 in my blog):
    http://www.theapplechap.com/TheAppleChap/Blog/Entries/2010/4/23Perfect_video_in_iTunes_-_Part_1Getting_great_rippedcontent.html
    Best of luck
    Alan

  • Batch transcoding for Blu-ray

    Hello,
    We have many short ~2 minute files with long filenames (so they can cleanly be used to form the chapter descriptions for the disc) organized into folders and, as mentioned in another thread, we are having difficulties preparing these files in advance for Blu-ray processing for Encore so they do not need to be transcoded when we select 4-5 to author a Blu-ray with.  I tried to get around this by creating a massive project with all 500 of our files, using Encore CS6 to transcode all of them, then hoped Encore would know it transcoded that same asset in another project when we went to use 5 of those same files in another project.  Unfortunately, not only did Encore not automatically detect that it had already transcoded the file for Blu-ray in another project, but when we went to manually locate the file, we saw that Encore truncated all our filenames to 20 characters in the Transcoded folder, followed by "_sessionA_blahbalhablh.m4v".  Our filenames are not unique to 20 characters, so many filenames with A, B, C, D, etc suffixes were created and we have no way of telling what file is what.  We can't even play the file to check, and we also can't compare the running length as Encore transcodes to elementary streams that can't be played back.  Is there anyway to copy the transcoded asset knowledge from one project to the other so we can make use of the 3 days of compute time we appear to have wasted? 
    I've also looked into using Adobe Media Encoder to do this, but I think I'd need to take our files one folder at a time and run the transcode on them so they didn't get jumbled with the other files.  I can't see a way to setup AME so that it handles recursive folders, and I also can't see a way of working with AME through command-line automation so that it can whir away and process one folder of 5-10 files at a time.  All I can see is a way for it to turn out a similar output to our failure with getting Encore to transcode the files.
    Any ideas on how we can batch-transcode for Blu-ray ahead of time instead of wait for Encore to transcode for every disc we build?

    Encore is not long filename friendly, and will cause problems if you exceed an 80 character filename (Including spaces). Odd characters and in some cases excessive path depth can also be issues. The Encore authorcore (sonic based) is old, and just not modern filename friendly.
    So I'd rethink the long filenames generally.
    Ask your AME question in the AME forum. I do not know whether there is a good option for you or not.
    hoped Encore would know it transcoded that same asset in another project when we went to use 5 of those same files in another project.
    Encore creates a folder structure for the project, and under the sources/transcodes/ folders, a folder for each asset that is transcoded. As soon as you create a new project, all that is gone, and with it encore's memory for it. You can import those files as assets, but I assume your point is that you can't tell what is what.
    We can't even play the file to check, and we also can't compare the running length as Encore transcodes to elementary streams that can't be played back.
    The elementary stream is an m2v. You can play these (e.g. with vlc player). But all that would be cumbersome.
    Still thinking about this...

  • Built for Blu Ray??

    I am looking to buy a new Receiver that will be able to run my HDTVs, PS3, Surround sound system, Netflix Movie rentals, Apple TV, etc.  I am considering a unit in the Yamaha Aventage series.  But According to Best Buy's information, many of them are not "Built for Blu Ray).  If you compare the RX-A1000 to the RX A-3000, the 1000 is not built for Blu Ray and yet it's a unit that costs a grand while the RX A-3000 is built for Blu Ray and it costs $1,800.  What is the meaning of "Built for Blu Ray" in layman's terms?  Do I need it (if so, why)?  What am I missing if I don't have it?

    I have found the term: "Built for Blu Ray" to be a general term that really does not denote a specific function. If the AVR you're considering has HDMI ins and outs it will inherently support any device (including Blu Ray) that has this standard connection. You do not need to seek out a unit that has this marketing mumbo jumbo and (in my humble experience) you won't be missing out on any functionality.
    You probably DO need to be concerned if it has "HDMI Up-Conversion". This allows you to plug in analogue sources (composite or component... like the Nintendo Wii), and the receiver will convert the signal to a 1080p "like" image AND convert it to a digital signal and output it to HDMI. Without this functionality you will have to use analogue inputs and outputs. Almost all AVRs at the price you quoted are standard with this, but you should still double check.
    When selecting a new AVR, you MAY also want to be sure that it is "3D Ready" even if you're not. This means it has the HDMI 1.4 version installed and will support 3D content. You may want to buy a future TV or device that has this functionality (your PS3 is already ready to play 3D Blu Rays if you've done recent firmware updates). 3D support is becoming more standard on AVRs these days though.
    I hope this helps!
    Best Buy Employee 8 Yrs, I don't profess to know everything... that's what Google's for.

  • H.264 for Blu-Ray Encoding Time

    Hi All,
    I have exported a Pro-Res 1080p 2 hour film from FCPX and just dropped it into compressor. I have then dragged the default H.264 for Blu-Ray settings on my video and it looks like it will take way over three hours. I have a friend running Media Encoder and with the same file on his laptop it does it in 40min and it's a slower spec . I am running Compressor  4.1.3 and the latest MAC OS operating system. I have enabled additional instanced checked and the number 1 in the drop down (there are no other numbers)
    Is there anything I am doing wrong, surely it can't be this slow, it's not even set to multipass.
    Thanks

    Sounds about right to me for a rMBP.
    Russ

  • Files or Folders needed for blu-ray disc missing !

    Hi,
    I have Encore CS6. It successfully builds 'blu-ray folder' & 'blu-ray image' without any error. But when I try to create an iso image of the prepared folder using 'Ashampoo Burning Studio' it gives an error message saying that the folder doesn't contain all the files and folders needed for blu-ray. But when tried to do the same for DVD, there is no error. My blu-ray burning drive is broken and I want to check my finished project from my hard drive using Daemon's Tool and VLC or PowerDirector.
    Could anybody advise how this can be fixed on Encore CS6. Encore CS5 never had this problem.
    Thanks

    Tried that as well. The player gave an unrecognized format error.

  • I have internet service on iMac but cannot get connection for Blu ray with airport express.

    Why am I not getting internet connection for blu ray on tv with airport express?

    Which exact model of the AirPort Express do you have?
    Did the Blu Ray player connect wirelessly to the Express before or has it never been able to connect to it at all?

  • Exporting MPEG2 files for Blu-ray from 720p60

    I am exporting MPEG2 files for Blu-ray from 720p60 using compressor 3.05. I export straight from Final Cut 6 to compressor. It all looks great except I end up with some frames in the video that pixelate. It is just one frame, and the average viewer may not see it, but if you go frame by frame you see it. I thought it was just a bad export, but I exported the file again and the same thing happens again on the exact same frame. The fact that it happened again on the exact same frame was very odd to me. It is this way on five different video files. It's certainly not like that in the original on my timeline, so I don't know why it is doing that.
    I guess I will try exporting a quicktime file first and then putting that file through compressor to see if that makes a difference. Any ideas from anybody?

    Exporting a quicktime file first still produced the pixelated frame. I'm not sure what else to try.

  • Menus for Blu-Ray

    Can one build chaptering menus that work in Blu-Ray with Encore?  I normally have worked with Final Cut X but there is no way to build menus for the Blu-Ray DVD.  Thanks
    Don

    Sorry to explain so poorly.  The timeline is the whole DVD.  Within it are multiple chapter points to delineate segments of the information.  Than, using the Mpeg2 compression file in Apple's DVD Pro, I build the menus with buttons which relate to the chapter points.  However, if I select. The compression protocol for Blu-Ray, it seems as tho I cannot make menus which are functional on the Blu-Ray disc.
    Another gentleman has answered saying there are many available menus in Encore which can be used for a Blu-Ray disc.  I got Adobe Premier's trial.  Am assuming that is different than Encore.
    Appreciate your help
    Don

  • Mpeg 2 for Blu-ray audio exports with missing frames at beginning and end.

    Im using a Matrox Axio LE system and the Matrox Media encoder to export an Mpeg 2 for blue-ray. My footage is shot in 1280x720p 59.94 drop frame. I have found that after exporting the file from the encoder and bringing it into Encore CS3 that the audio that was exported is a little shorter than the video. Frames are missing at the end of the file.
    Because of this my video and audio are way out of sync. Has anyone else come across this issue?

    Maybe on the Matrox forums.

  • Encore CS3 hangs on "Come for Blue-ray stay for Flash"! Leopard 10.5.2...

    I just got my new MacPro running Leopard. Installed CS3 Master Collection. I opened Premiere ok, Photoshop, etc...but when I tried Encore it just hangs on the part that says "Come for Blue-ray stay for Flash"!
    I tried to make a dvd out of premiere going to encore it just had the beach ball spinning.
    Thanks in advance anyone who can help.
    rb.
    ps:not sure if this cause an issue but I installed an LG GGW-H20L blue-ray burner(it showed up fine in system profilier as sata device in the 2nd-lower open drive bay...)

    An update.
    Encore would not launch with the LG GGW-H20L installed in my brand new MacPro. Once I unplugged it it launched Encore CS3. So I do not recommend this blue-ray burner in OSX Leopard.
    I'm wondering if the Pioneer BDR-202 would work with MacPro, Leopard 10.5.2, Encore 3.0.2 update.
    If anyone has any info please share!

Maybe you are looking for