Correct installation of IIS agent?

Hi,
After installing a policy agent 2.0 for IIS 5.0, I don't have an amagent dir at the IIS docroot. is this normal? Or do you have this dir with working installation?
thanks

hi there,
IIS will be installed by default on windows 2003 operating system , to open IIS , please use start --> run --> inetmgr. or start --> programs--> administrative tools --> IIS manager.
in order to install additional components you need to have i386 folder. you can navigate to c:\windows\i386 folder.
please use the below link to download windows 2003 sp2
http://www.microsoft.com/downloads/details.aspx?familyid=1B9FE9E4-1D57-4698-A5CF-DB271ED6D90A&displaylang=en
sainath
!analyze

Similar Messages

Installation audit vault agent with RAC configuration

Hi at all,
I have a question about the installation of the agent on the RAC configuration. Where must I install the Audit vault agent, on all RAC nodes or is there a properly configuration?
Thanks
Vincenzo

By default when you install the agent on any single node the installation recognizes that it is a cluster and presents you with a list of available nodes from which to select.
With a RAC cluster you have one database and multiple instances. All instances will write to one, and only one AUD$ and FGA_LOG$ table so if you are using database auditing one node will suffice. Which node that is though depends on knowing which node is up at any one time so you could potentially choose a node that is dropped from the cluster or is down for patching and maintenance while the cluster is still running. With respect to REDO collection each node has its own redo thread so you definitely need to be collecting from every node.
Audit Vault has not been out long enough that I can tell you from experience what might be defined as "best practice" and often what we really need to study is "worst practice" to know what not to do. But in the case of RAC my instinct would be to first determine the collection type(s) and then decide. Erring on the side of collecting from all nodes makes a lot of sense.

What is the correct installation sequence for my ATI Radeon 9800 PRO MAC AGP 128MB into my Quicksilver 867 G4?

Hi.
I just got my used ATI Radeon 9800 PRO MAC AGP 128MB card.
What is the correct installation sequence into my Quicksilver 867 G4 running 10.4.11 on one drive 10.5 on another?
The original NVIDIA GeForce2 MX - 32MB SDRAM went bust.
Is the driver build in 10.4?
Do I remove the old driver?
If I need to install the driver that came with it, (10.3.6) should the card be installed first?
What about firmware updates?
Thank you for all your time and patience.
W.W.

I think it's the card, but here are some files that may affect it...
/Users/YourUserName/Library/Preferences/ByHost /com.apple.preference.displays.<12digitHex#>.plist
/Library/Preferences/com.apple.windowserver.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.windowserver.<12digitHe x#>.plist
/Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist

Installation problem: IIS 7, Vista 64 Bit

Hi all!
I tried to install EPM 11.1.1.1 on my laptop (Vista Business, 64 Bit) and have a problem with the installation of HFM Web Application and other components of EPM 11.1.1.1, witch needs IIS.
After I've got the error "Products needs IIS to be installed" for the first time, I installed IIS 7.
Now the IIS is running - I hope (However I'm able to open the standard web site http://localhost/), but I'm still getting the same error.
How can I check, if IIS is running?
Could someone tell me, what I maybe forgot or what I have to consider? Do I have to make some IIS settings? I already allowed all isapi and cgi extensions.
Could Vista or the 64-Bit system version be the source of my problem? Why HFM does not recognize the installed IIS7?
Do someone have any ideas?
Thanks in advance!
Alex
Edited by: alta on 02.12.2008 10:51

Most people are going to tell you to use a supported Operating System. If this is a production installation then install a supported OS -- I'm presuming this is not a production or multi-user system and iis a personal development system.
This post seems to have an answer to one of the main problems with a Vista install - Re: EPM System 11.1.1: OpenLDAP & WIndows Vista Issue
You may encounter issues with Performance Management Architect and IIS7 and those are likely much more difficult if not impossible to resolve -- if you want to use classic applications then just select apache when you deploy Workspace and do not install Performance Management Architect.
Let us know how it goes.
Regards,
-John
Edited by: Jbooth on May 13, 2009 8:54 PM

Hyp Sys 11.1.1 - Prerequisite Installations (Oracle, IIS 6.0, Sys Req)

Re: Hyp Sys 11.1.1 - Installation
Posted: Apr 12, 2009 2:23 AM in response to: JohnGoodwin Edit Reply
okay, per the .pdf, i can have a successful installation having the following O/S:
Boot 1 - Linux AS 4.7
Boot 2 - Windows Server 2003 SP1, or Windows 2000 Professional SP4, or Windows Server 2000 SP4 all of which gave me issues to download and will try again thinking my mind was on too many new things of thought.
As for the other prerequisites, please tell me what else to CONFIGURE or NOT CONFIGURE based on the following:
(1) Oracle 11g installed fine.
(2) IIS 6.0 having ASP installed successfully and configured its componets on the default web site created:
directory browsing is enabled
authenication features are all enabled
IIS Manager permissions added for Administrator and 5 users created within AD DS (thinking here about kennedy's comment to add a DCOM user)
ASP service started
Bindings - one for the http static ip using port 80 bound to domain
(3) Server Configuration involved adding features (successful services) in 2008, which is implied to be the same as outside of known version differences for 2003 or 2000, pending for download from microsoft (having issues with finding the right compliant):
AD DS
AD LDS
IIS
.Net Framework
(4) AD DS configuration involved adding users to the site domain corp.carmenwilliams.com. as for the 5 users, i practiced by adding one user giving perm, account, and member of stuff. i have one user that is not within the user folder having a DCOM name. i can't see, read, or obtain anything about kennedy's point in creating a DCOM user.
As part of the wizard setup process, the default site is added having a server successfully running.
I modified all users to have all rights access just to eliminate further study that is outside of my initial work of effort in the near future.
(5) AD LDS configuration involved a new instance using port 58089 that did not create an application partition and imported an LDF file successfully. i was able to execute LDP.exe to test a connection to my local host.
any other type connection, bindings, or to be apart of is not known how to do at this time.
With said, my hyp installation failed on HabNet and Shared Services Open LDAP which are believed to be the same problem once i install on Linux and Win 2003 or 2000 which ever can be downloaded successfully.
Please advise.
Thank you,
Carmen
Edited by: user3231215 on Apr 28, 2009 2:48 AM

Hi,
I would just try and configure Shared Services on its own first, if you have problems then check the hyperion\logs\config logs for errors.
Shared Services/Openldap are a core component and without that working there is no point in moving on to the next stage of configuration.
Cheers
John
http://john-goodwin.blogspot.com/

Silent installation of Cloud agent 12c failed on a windows 2003 host

Hello All,
I've done multiple installations by silently installing the cloud agent 12c using a response file. However, the configuration portion failed on this one windows 2003 host.
Has anyone seen this? I've searched on metalink and see other problems like TZ, service already exists, incorrect PERL settings etc..but found nothing that helps so far.
In log file:
The action configuration is performing
The plug-in Agent Configuration Assistant is running
AgentConfiguration:agent configuration has been started
Validating OMS_HOST and EM_UPLOAD_PORT
Performing free port detection..
AgentConfiguration: Executing emctl deploy agent command...
AgentConfiguration:agent configuration finished with status = false
The plug-in Agent Configuration Assistant has failed its perform method
The action configuration has failed its perform method
In Agent Deploy log file:
value passed to dir splitC:/oracle/em/agent_inst
INFO: length of temp is2
INFO: Return value:C:
\/oracle/em/agent_inst
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The
Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh
monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent
software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in,
if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-
in, view the plug-in deployment log C:\oracle\em\agent_inst\install\logs to check if the plug-in
configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode
finished for action: configure
INFO:
INFO: You can see the log file: C:\oracle\em\core
\12.1.0.3.0\cfgtoollogs\oui\configActions2013-12-23_11-07-08-AM.log
INFO:
INFO: C:\oracle\em>exit
/b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\oracle\em\core\12.1.0.3.0\oui\bin
\runConfig.bat ORACLE_HOME=C:\oracle\em\core\12.1.0.3.0 RESPONSE_FILE=C:\oracle\em\core
\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML=
{oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent
Configuration Failed
SEVERE: ERROR: Agent Deployment Failed

Thanks for the reply Rahul.
I've used that same response file for deployments on other servers without any problem.
See response file below: (note i've changed the server name)
## copyright (c) 1999, 2012 Oracle. All rights reserved.          ##
## Specify values for the variables listed below to customize     ##
## your installation.                                             ##
## Each variable is associated with a comment. The comment        ##
## identifies the variable type.                                  ##
## Please specify the values in the following format:             ##
##         Type         Example                                   ##
##         String       "Sample Value"                            ##
##         Boolean      True or False                             ##
##         Number       1000                                      ##
##         StringList   {"String value 1","String Value 2"}       ##
## The values that are given as <Value Required> need to be       ##
## specified for a silent installation to be successful.          ##
## This response file is generated by Oracle Software             ##
## Packager.                                                      ##
RESPONSEFILE_VERSION=2.2.1.0.0
#OMS_HOST:<String> OMS host info required to connect to OMS
#EM_UPLOAD_PORT:<String> OMS port info required to connect to OMS
#AGENT_REGISTRATION_PASSWORD:<String> Agent Registration Password needed to
#     establish a secure connection to the OMS.
#AGENT_INSTANCE_HOME:<String> Agent instance home is the location of agent state directory.
#AGENT_PORT:<String> Agent port on which the agent process should be started.
#b_startAgent:<boolean> Agent will not be started after configuration if the value specified is false.
#ORACLE_HOSTNAME:<String> Fully qualified domain name of host where is the agent is deployed.
#s_agentHomeName:<String>Customized Oracle home name for the agent home. Example: s_agentHomeName="agent12gR1"
OMS_HOST="omshost.company.com"
EM_UPLOAD_PORT="1159"
AGENT_REGISTRATION_PASSWORD="complicatedpassword"
AGENT_INSTANCE_HOME="e:/oracle/em/agent_inst"
AGENT_PORT="3872"
b_startAgent=true
ORACLE_HOSTNAME="targetserver.company.com"
#s_agentHomeName=<Value Unspecified>
#s_agentSrvcName:<String> Sets the agent Service Name and this variable can be
#      used to overrite the agent service name calculated by the install. This is
#      required for only Windows.
#      Example:
#      s_agentSrvcName = "GridAgent"            ; User specified value
#s_agentSrvcName=""
#Please Don't change the values of these variables
#EM_INSTALL_TYPE:<STRING> install type
EM_INSTALL_TYPE="AGENT"

Installation of Introscope Agent

Hi!
I would like to install Introscope Agent.
Neither the manual installation nor the installation via Setup Introscope Agent was succesfull.
case a) automatic installation via SMD Wizard
The erros of installation with SMD Wizard (Setup Introscope Agent):
The landscape definition of selected system is empty.
Operation has been aborted
case b) manual installation (uncar the file ISAGENT71...SAR)
With the manual installation of Setup Introscope Agent ISAGENT71*.SAR I have the following problem:
No folder /usr/sap/ccms/wily/logs exist
If I add Java settings in Config Tool, restart the system and open the file d:\usr\sap\<SID>\<instance>\j2ee\cluster\instance.properties
I can not find any entries added before.
Thank you for any helpful information
regards
Thom

Again case a)
Please verify your definition, and also you need to have the previous Managed Setup Wizard run successfully.
case b) I would not recommend it.
Best Regards,
Frederic

Correct installation of BDB XML on Mac OS X, and use with XCode

I downloaded the tarball, compiled the whole thing without a problem, and then copied the contents of the install directory to /usr/ (trying to change the prefix on the configure script stopped it from compiling, for some reason) because I didn't want to add stuff to my path (and the contents looked like they belonged in /usr anyway)
But now I'm not sure how to get XCode to find the search paths and libraries. Does anyone who has a working installation of BDB XML on mac os feel like giving me some pointers as to how they did it?
Thanks,
Daniel Peebles

I don't know the exact answer to your question, but you can probably figure it out on your own like:
1) Create a File object that represents an existing file. Play around with the path until the file can be found.
2) Now that you have a File object representing a valid, existing path, use MyFile.getAbsolutePath() to see what the full path string is. MyFile.getCanonicalPath() might provide some answers as well.
Whatever getAbsolutePath() returns is the correct format for the file path string.

Running PowerShell Script to automate the installation of IIS feature - Add-WindowsFeature error, help please

I'm just learning PS scripting and Chef Programming, so I'm sure I'm missing something simple. I'm trying to run a recipe that is using PS as the interpreter. I've ensured I'm running PS in 64 bit with admin privileges, and have Imported the ServerManager
module. I even added a line to my script to have it run that first, but am still receiving an error in my script. I'm running this on a VM of Server 2008R2
Script:
powershell_script 'Install IIS' do
code "Import-Module ServerManager -passthru"
code "Add-WindowsFeature Web-Server"
guard_interpreter :powershell_script
not_if "(Get-WindowsFeature -Name Web-Server).Installed"
end
Error:
PS C:\Users\Administrator\chef-repo> chef-apply webserver.rb
Recipe: (chef-apply cookbook)::(chef-apply recipe)
* powershell_script[Install IIS] action run
    ================================================================================
    Error executing action `run` on resource 'powershell_script[Install IIS]'
    ================================================================================
    Mixlib::ShellOut::ShellCommandFailed
    Expected process to exit with [0], but received '1'
    ---- Begin output of "powershell.exe" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat
None -File "C:/Users/ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1" ----
    STDOUT:
    STDERR: The term 'Add-WindowsFeature' is not recognized as the name of a cmdlet, function, script file, or operable
program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    ---- End output of "powershell.exe" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat No
ne -File "C:/Users/ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1" ----
    Ran "powershell.exe" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat None -File "C:/Us
ers/ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1" returned 1
    Resource Declaration:
    # In webserver.rb
      1: powershell_script 'Install IIS' do
      2:   code "Import-Module ServerManager -passthru"
      3:   code "Add-WindowsFeature Web-Server"
      4:   guard_interpreter :powershell_script
      5:   not_if "(Get-WindowsFeature -Name Web-Server).Installed"
      6: end
    Compiled Resource:
    # Declared in webserver.rb:1:in `run_chef_recipe'
    powershell_script("Install IIS") do
      action "run"
      retries 0
      retry_delay 2
      guard_interpreter :powershell_script
      command "\"powershell.exe\" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat None -Fi
le \"C:/Users/ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1\""
      backup 5
      returns 0
      code "Add-WindowsFeature Web-Server"
      interpreter "powershell.exe"
      cookbook_name "(chef-apply cookbook)"
      recipe_name "(chef-apply recipe)"
      not_if "(Get-WindowsFeature -Name Web-Server).Installed"
    end
[2014-12-24T10:29:56-08:00] FATAL: Stacktrace dumped to C:/chef/cache/chef-stacktrace.out
[2014-12-24T10:29:56-08:00] FATAL: Mixlib::ShellOut::ShellCommandFailed: powershell_script[Install IIS] ((chef-apply coo
kbook)::(chef-apply recipe) line 1) had an error: Mixlib::ShellOut::ShellCommandFailed: Expected process to exit with [0
], but received '1'
---- Begin output of "powershell.exe" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat None
-File "C:/Users/ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1" ----
STDOUT:
STDERR: The term 'Add-WindowsFeature' is not recognized as the name of a cmdlet, function, script file, or operable prog
ram. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
---- End output of "powershell.exe" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat None -
File "C:/Users/ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1" ----
Ran "powershell.exe" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat None -File "C:/Users/
ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1" returned 1

Hi There,
We have a application named Microsoft SCOM. That as well requires ISS to be installed. I tried this long back and it worked in powershell. Below is the powershell script i used to install IIS and some specific features from it. Hope it helps in altering
it and making one of your own script.
1. Launch the PowerShell command
prompt
Run this command
Import-Module ServerManager
3. Press Enter
4. Run this
command
Add-WindowsFeature NET-Framework-Core,Web-Metabase,Web-WMI,Web-Static-Content,Web-Default-Doc,Web-Dir-Browsing,Web-Http-Errors,Web-Asp-Net,Web-Net-Ext,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Filtering,Web-Windows-Auth,
Web-Mgmt-Console –restart
Gautam.75801

Installation Oracle Management Agent 11g in Linux

Hi,
I am Arun From India..
I am planning to Install Oracle management Agent 11g in a Linux (5.5 32-bit) Server...But I saw many methods in Website to Install........
Please help me to select the Easy method to Install Oracle Management Agent and Please bring the document to Install Management Agent......
Could you specify how can we Configure the DATABASE with AGENT.....?????????????
Please help me........Hope your Support........
Arun Kurungatt

Hi slatterych,
Thanks for your Valuable Support and Comments...I have some Doubts before Installation.
I am going to Install Agent on Server-2 , which contains Oracle DB 11g only now ( No Grid Control )..So What are the Things I need to perform in Server-2 while installing Agent (Silent mode)??? Is That same like which you Sent???
Already I have Installed OEMGC in Server-1.. How can I connected Agent from Server-2 to OEMGC (Server-1)????
Should I add OMS details of Server-1 in additional_agent.rsp ( Server-2 ) before installing Agent????
Hope your Support...Please
Arun Kurungatt

Installation of Platform Agent

Hello,
We have a Redwood scheduler configured on SAP system(AIX+Oracle, only Java Stack)
Now we are trying to install the "Platform Agent Installation - Version 0_26_6" on another server to act as a client to the Redwood Scheduler.
The platform agent installation script asks for Server Port number. I do not know which port would the Redwood Server use to communicate with the Platform Agent.
Kindly help.
Edited by: Gautam Poddar on Mar 4, 2009 10:17 AM

Hi Gautam,
Port 1555 is the default port for the platform agent to listen to connections from the CPS repository.
Port 5xx00 is the port you need if you want the platform agent to register itself with the CPS repository during installation.
Regards,
Anton.

Installation of Oracle agent failed due to AgentPlugIn

I am trying to install agent on HP-UX , Every thing looks ok till agent is installed on the machine, but it fails continuously while running configuration assistant. I tried to reinstall many times , but getting same problem :->
Starting to execute configuration assistants
Configuration assistant "Agent Configuration Assistant" failed
SEVERE:OUI-10104:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured. Select the failed assistants and click the 'Retry' button to retry them.
The "/oracle/oemagent/agent10g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
The "/oracle/oemagent/agent10g/cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
pls also check log in /oracle/product/oemagent/agent10g/cfgtoollogs/cfgfw in the next msg. Thanks

186 INFO: oracle.sysman.top.agent:Executing Command: /oracle/product/oemagent/agent10g/perl/bin/perl /oracle/product/oema
gent/agent10g/sysman/admin/discover/host.pl /oracle/product/oemagent/agent10g lamaru01.cte.net
187 INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
188 INFO: oracle.sysman.top.agent:STDERR=
189
190 STDOUT=
191 <Targets>
192 <Target TYPE="host" NAME="lamaru01.cte.net" >
193 </Target>
194 </Targets>
195
196 INFO: oracle.sysman.top.agent:Adding /oracle/product/oemagent/agent10g/sysman/install/target.outhost file to /oracle/
product/oemagent/agent10g
197 INFO: oracle.sysman.top.agent:addToTargetsXML:Will not remove for now...
198 INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = /oracle/product/oemagent/agent10g/s
ysman/install/target.outhost to /oracle/product/oemagent/agent10g successfully.
199 INFO: oracle.sysman.top.agent:Executing Command: /oracle/product/oemagent/agent10g/perl/bin/perl /oracle/product/oema
gent/agent10g/sysman/admin/discover/oracledb.pl /oracle/product/oemagent/agent10g lamaru01.cte.net
200 INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
201 INFO: oracle.sysman.top.agent:STDERR=
202
203 STDOUT=
204 <Targets>
205 <Target TYPE="oracle_database" NAME="USP1" >
206 <Property NAME="OracleHome" VALUE="/oracle/product/9.2.0" />
207 <Property NAME="UserName" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
208 <Property NAME="MachineName" VALUE="lamaru01" />
209 <Property NAME="Port" VALUE="1526" />
210 <Property NAME="SID" VALUE="USP1"/>
211 <Property NAME="ServiceName" VALUE="USP1"/>
212 </Target>
213 <Target TYPE="oracle_database" NAME="U01A" >
214 <Property NAME="OracleHome" VALUE="/oracle/product/9.2.0" />
215 <Property NAME="UserName" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
216 <Property NAME="MachineName" VALUE="lamaru01" />
217 <Property NAME="Port" VALUE="1526" />
218 <Property NAME="SID" VALUE="U01A"/>
219 <Property NAME="ServiceName" VALUE="U01A"/>
220 </Target>
221 <Target TYPE="oracle_database" NAME="USP2" >
222 <Property NAME="OracleHome" VALUE="/oracle/product/9.2.0" />
223 <Property NAME="UserName" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
224 <Property NAME="MachineName" VALUE="lamaru01" />
225 <Property NAME="Port" VALUE="1526" />
226 <Property NAME="SID" VALUE="USP2"/>
227 <Property NAME="ServiceName" VALUE="USP2"/>
228 </Target>
229 <Target TYPE="oracle_database" NAME="CUP1" >
230 <Property NAME="OracleHome" VALUE="/oracle/product/9.2.0" />
231 <Property NAME="UserName" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
232 <Property NAME="MachineName" VALUE="lamaru01" />
233 <Property NAME="Port" VALUE="1526" />
234 <Property NAME="SID" VALUE="CUP1"/>
235 <Property NAME="ServiceName" VALUE="CUP1"/>
236 </Target>
237 <Target TYPE="oracle_database" NAME="CUP2" >
238 <Property NAME="OracleHome" VALUE="/oracle/product/9.2.0" />
239 <Property NAME="UserName" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
240 <Property NAME="MachineName" VALUE="lamaru01" />
241 <Property NAME="Port" VALUE="1526" />
242 <Property NAME="SID" VALUE="CUP2"/>
243 <Property NAME="ServiceName" VALUE="CUP2"/>
244 </Target>
245 <Target TYPE="oracle_listener" NAME="LISTENER_PET2_lamaru01.cte.net" >
246 <Property NAME="ListenerOraDir" VALUE="/oracle/product/9.2.0/network/admin" />
247 <Property NAME="LsnrName" VALUE="LISTENER_PET2" />
248 <Property NAME="Machine" VALUE="lamaru01" />
249 <Property NAME="OracleHome" VALUE="/oracle/product/9.2.0" />
250 <Property NAME="Port" VALUE="1526" />
251 </Target>
252 </Targets>
253
254 INFO: oracle.sysman.top.agent:Adding /oracle/product/oemagent/agent10g/sysman/install/target.outdb file to /oracle/pr
oduct/oemagent/agent10g
255 INFO: oracle.sysman.top.agent:addToTargetsXML:Will not remove for now...
256 INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = /oracle/product/oemagent/agent10g/s
ysman/install/target.outdb to /oracle/product/oemagent/agent10g successfully.
257 INFO: oracle.sysman.top.agent:Executing Command: /oracle/product/oemagent/agent10g/perl/bin/perl /oracle/product/oema
gent/agent10g/sysman/admin/discover/ocs_mailstore_discovery.pl /oracle/product/oemagent/agent10g lamaru01.cte.net
258 INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
259 INFO: oracle.sysman.top.agent:STDERR=
260 log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
261 log4j:ERROR Please initialize the log4j system properly.
262
263 STDOUT=
264 <Targets>
265 </Targets>
266
267 INFO: oracle.sysman.top.agent:Adding /oracle/product/oemagent/agent10g/sysman/install/target.outocs file to /oracle/p
roduct/oemagent/agent10g
268 INFO: oracle.sysman.top.agent:addToTargetsXML:Will not remove for now...
269 INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = /oracle/product/oemagent/agent10g/s
ysman/install/target.outocs to /oracle/product/oemagent/agent10g successfully.
270 INFO: oracle.sysman.top.agent:Executing Command: /oracle/product/oemagent/agent10g/perl/bin/perl /oracle/product/oema
gent/agent10g/sysman/admin/discover/oracle_ias.pl /oracle/product/oemagent/agent10g lamaru01.cte.net
271 INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
272 INFO: oracle.sysman.top.agent:STDERR=
273 log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
274 log4j:ERROR Please initialize the log4j system properly.
275
276 STDOUT=
277 <Targets>
278 </Targets>
279
280 INFO: oracle.sysman.top.agent:Adding /oracle/product/oemagent/agent10g/sysman/install/target.outias file to /oracle/p
roduct/oemagent/agent10g
281 INFO: oracle.sysman.top.agent:addToTargetsXML:Will not remove for now...
282 INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = /oracle/product/oemagent/agent10g/s
ysman/install/target.outias to /oracle/product/oemagent/agent10g successfully.
283 INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to iAS Homes
284 INFO: oracle.sysman.top.agent:Executing Command: /oracle/product/oemagent/agent10g/perl/bin/perl /oracle/product/oema
gent/agent10g/sysman/admin/discover/oracle_apache.pl /oracle/product/oemagent/agent10g lamaru01.cte.net
285 INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
286 INFO: oracle.sysman.top.agent:STDERR=
287 log4j:ERROR No appenders could be found for category (emSDK.config).
288 log4j:ERROR Please initialize the log4j system properly.
289
290 STDOUT=
291 <Targets>
292 </Targets>
293
294 INFO: oracle.sysman.top.agent:Adding /oracle/product/oemagent/agent10g/sysman/install/target.outapache file to /oracl
e/product/oemagent/agent10g
295 INFO: oracle.sysman.top.agent:addToTargetsXML:Will not remove for now...
296 INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = /oracle/product/oemagent/agent10g/s
ysman/install/target.outapache to /oracle/product/oemagent/agent10g successfully.
297 FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.agent:AgentPlugIn:perform:Starting Agent with star
tAgent=true
298 FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.agent:Starting the agent
299 INFO: oracle.sysman.top.agent:Starting the agent...
300 FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.agent:Executing Command: /oracle/product/oemagent/
agent10g/bin/emctl start agent
301 FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.agent:Requested Operation Completed with Status =
1
302 FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.agent:Requested Operation /oracle/product/oemagent
/agent10g/bin/emctl start agent has failed to perform with Status = 1
303 STDERR=
304
305 STDOUT=
306
307 Oracle Enterprise Manager 10g Release 10.2.0.1.0.
308 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
309 Starting agent ................................. failed.
310 Consult the log files in: /oracle/product/oemagent/agent10g/sysman/log
311 CONFIG: oracle.sysman.top.agent:
312 The Management Agent Configuration Assistant has failed. The following failures were recorded:
313
314
315 STDERR=
316
317 stty: : Not a typewriter
318 stty: : Not a typewriter
319 STDOUT=
320
321 Oracle Enterprise Manager 10g Release 10.2.0.1.0.
322 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
323 Enter Agent Registration password :
324 Failed to stop agent...
325
326 STDERR=
327
328 stty: : Not a typewriter
329 stty: : Not a typewriter
330 STDOUT=
331
332 Oracle Enterprise Manager 10g Release 10.2.0.1.0.
333 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
334 Enter Agent Registration password :
335 Failed to stop agent...
336 STDERR=
337
338 STDOUT=
339
340 Oracle Enterprise Manager 10g Release 10.2.0.1.0.
341 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
342 Starting agent ................................. failed.
343 Consult the log files in: /oracle/product/oemagent/agent10g/sysman/log
344
345 FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.agent:
346 The Management Agent Configuration Assistant has failed. The following failures were recorded:
347
348
349 STDERR=
350
351 stty: : Not a typewriter
352 stty: : Not a typewriter
353 STDOUT=
354
355 Oracle Enterprise Manager 10g Release 10.2.0.1.0.
356 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
357 Enter Agent Registration password :
358 Failed to stop agent...
359
360 STDERR=
361
362 stty: : Not a typewriter
363 stty: : Not a typewriter
364 STDOUT=
365
366 Oracle Enterprise Manager 10g Release 10.2.0.1.0.
367 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
368 Enter Agent Registration password :
369 Failed to stop agent...
370 STDERR=
371
372 STDOUT=
373
374 Oracle Enterprise Manager 10g Release 10.2.0.1.0.
375 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
376 Starting agent ................................. failed.
377 Consult the log files in: /oracle/product/oemagent/agent10g/sysman/log
378
379 INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:1:configuration in CfmAggregateInstance: ora
cle.sysman.top.agent:10.2.0.1.0:common:family=CFM:oh=/oracle/product/oemagent/agent10g:label=0} failed with an unhandled exce
ption:
380 java.lang.Exception:
381 The Management Agent Configuration Assistant has failed. The following failures were recorded:
382
383
384 STDERR=
385
386 stty: : Not a typewriter
387 stty: : Not a typewriter
388 STDOUT=
389
390 Oracle Enterprise Manager 10g Release 10.2.0.1.0.
391 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
392 Enter Agent Registration password :
393 Failed to stop agent...
394
395 STDERR=
396
397 stty: : Not a typewriter
398 stty: : Not a typewriter
399 STDOUT=
400
401 Oracle Enterprise Manager 10g Release 10.2.0.1.0.
402 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
403 Enter Agent Registration password :
404 Failed to stop agent...
405 STDERR=
406
407 STDOUT=
408
409 Oracle Enterprise Manager 10g Release 10.2.0.1.0.
410 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
411 Starting agent ................................. failed.
412 Consult the log files in: /oracle/product/oemagent/agent10g/sysman/log
413
414 at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:242)
415 at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:217)
416 at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
417 at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
418 at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
419 at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
420
421 INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
422 INFO: Cfm.save() was called
423 INFO: Cfm.save(): 2 aggregate instances saved

I have a windows 7 64x SP1 and every time I install iTunes 12 I get this message when I try to ponen it:"This copy of Itunes is damaged and it has not been correctly installe. Please, install iTunes again.(-42404)". The instalation process runs smoot

I have a windows 7 64x SP1.
Every time I install iTunes 12 I get this message when I try to open it:"This copy of iTunes is damaged and it has not been correctly installed. Please, install iTunes again.(-42404)".
The instalation process runs smoothly without any error message and iTunes has been installed in my computer before. The problem started with the update no. 12. Any idea what's going on? Thank you

if itunes will not run, you probably have mangled windows badly
one feature of windows 8 is the refresh that saves libraries,
because you are using windows 7, you will need to backup all files to another storage device

Installation of SAPCCM4X-Agent on Windows Cluster

Hi!
I woulld like to install SAPCCM4X-Agent on Windows Cluster.
Does anyone know the procedure here (e.g. install the agent twice on both nodes, etc.)...
Thank you very much!
regards
Thom

Hello Thom,
Here is a note that will help you out.
SAP Note 536954 - OS data in a cluster environment for OS07
As per the note
The CCMS agent must be located on a shared disk, so that the cluster administrator software can start the service later.
Regards,
Siddhesh
Edited by: Siddhesh Ghag on May 27, 2008 11:02 AM

VC Installation with IIS 6.0 and MS SQL 2005 on MSServer2003

Dear all,
Is it possible, if we plan to install VC6.0 with IIS6.0 and MS SQL 2005 on MS Server 2003?
Now I have installation guide for install VC6.0 but it 's recommend to use MS SQL 2000 [Now MS SQL 2000 is very old and my company plan to use 2005]
Another question is If I want to change or install VC7.0, pls guide me the path and the name of VC7.0 in Service Marketplace that I have to download it. When I seach in service marketplace, I found the result as below. Which file that I have to download it, if I want to install VC7.0
000001   VISUAL COMPOSER BASE 7.01
Installation Software Component (Current View)
000002   VISUAL COMPOSER BASE 7.11
Installation Software Component (Current View)
000003   VISUAL COMPOSER BI KITS 7.01
Installation Software Component (Current View)
000004   VISUAL COMPOSER BI KITS 7.11
Installation Software Component (Current View)
000005   VISUAL COMPOSER FLEX
Installation Software Component (Current View)
000006   VISUAL COMPOSER FLEX 7.01
Installation Software Component (Current View)
000007   VISUAL COMPOSER FRAMEWORK 7.01
Installation Software Component (Current View)
000008   VISUAL COMPOSER FRAMEWORK 7.11
Installation Software Component (Current View)
000009   VISUAL COMPOSER GP KITS
Installation Software Component (Current View)
000010   VISUAL COMPOSER GP KITS 7.01
Installation Software Component (Current View
Regards,
Pannee

Hi,
Am not sure this would answer your question or not, but this is for your info:
Visual Composer is now built in or provided as default component in EP7.0 SPS12 onwards.
If you have the portal installation then you can access this by http://hostname:5xx00/VC.
Regards,
Vamshi.

Correct installation of IIS agent?

Similar Messages

Maybe you are looking for