Correct MTU Size For The E4200 Using DSL?

I wanted to verify the correct MTU size manual setting for the E4200 using DSL. I was told by an uninterested Linksys Tech that the correct MTU size should be manual at 1375. I am running firmware v1.0.01 Basically, I have a Mac wired to the E4200 and 2 wireless Computers. I would like to get the best Internet speed that I can, both wired and wireless. What do you suggest? Thanks.
Solved!
Go to Solution.

See here

Similar Messages

Can I set the MTU size for the Airport Extreme?

Can I change the MTU size setting of the Airport? How would this be possible? In my Linksys router I was able to change this.

Since the AirPort Extreme base station (AEBS) does not modify the packets in any way. So as neptune2000 stated, there is no MTU setting. Whatever MTU your computer broadcasts with is unchanged by the AEBS.
You will need to configure the MTU on the computer sending the packets.

Control the Batch Size for inseting tables using xi

Hi Friends,
Please let me know if we are able to control the batch size for inserting data using procedures for staging tables. Using SAP XI. Any blogs on this. or any information. please let us know.
Thank you
Regards
Ramidi

Hi Ramidi,
There is something called message split on adapter engine but it won't guarantee a sequence of adapter calls.
here is a blog about it:
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Maybe there is also an another simple way to do it.
Regards,
Wojciech
<i>** Please reward points if found it useful **</i>

[svn] 3672: Removing the commonly used getUnqualifiedClassName out of the less commonly used utility class to reduce SWF size for the general case .

Revision: 3672
Author: [email protected]
Date: 2008-10-15 16:54:51 -0700 (Wed, 15 Oct 2008)
Log Message:
Removing the commonly used getUnqualifiedClassName out of the less commonly used utility class to reduce SWF size for the general case.
Reviewer: Gordon
QE: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/graphicsClasses/TextGraphicEleme nt.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITextField.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/NameUtil.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/ObjectUtil.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/OrderedObject.as

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Can I charge my iPad mini and/or my iPhone 4S from 220 volt outlets using just the correct plug adapter for the country.

Can I charge my iPad mini and/or my iPhone 4S from 220 volt outlets using just the correct plug adapter for the country, without a power converter?

Not staff or owner by a long shot.
I just know that anecdotally I have seen people reporting issues with their mini's charging. Is there a real issue or not? I don't know. Not a day goes by that a person doesn't post here complaining that their iPad won't charge and it turns out that they're trying to do it via USB or with the iPhone block.
But while there are a lot of user fixes sometimes it's good to have the pros take a look at things,and at the very least document that there has been an issue.
the four main reasons an iPad won't charge (beyond being plugged into a USB port)
Bad cable
bad outlet
bad brick
rule those out and it leaves issue with the iPad.

Correct panel sizes for a 11x17 tabloid (3 Panels)

Hi,
I have done some research on the internet and found different answers so I thought I would come to the best answer spot of all. HERE!
I need to create a 11 x 17 Tabloid 3 panel (Tri Fold), document. I have completed one already and as I suspected, I needed different sizes for the panels so that it properly folds.
When I create the new document, here is what it gave me:
Tabloid
W= 102p0
H=66po
3 Columns
Gutter= 1p0
Margins (all 4) = 1p6
each of the 3 panels is 32p4
Could someone please enlightned me from you experience what the best size would be for each panel. I believe the changes are going to be small so that I can go in and resize (if I remember how), each panel for the x y cordinates.
Thanks in advance.
Bob

Let's see if I can walk you through method two.
Set up the doc as Tabloid with three columns (you should add a slug top and bottom for the fold marks, which I didn't do in the illustrations). I used .25 inch margins and .5 inch gutters, but you can do whatever you like. Note this is facing pages so we can mirror the guides on the master page:
Go to the master page. Now, View > Grids & Guides > Lock Column Guides and remove the checkmark so the column guides can be adjusted:
Drag a ruler guide (this just makes postioning things easier) to the line up with the first column guide on the left page, then select the guide you just dragged (make sure you don't have ruler guides locked, too). In the X-coordinate field type + .0625 after whatever value is there, and hit enter. Your guide will move to the right 1/16 inch.
After the guide is moved, drag the column guide to snap into the new position.
Now you can move the ruler guide again to use it for the fold guide. Select the ruler guide and in the x-corrodinate field add 1/2 the gutter width, then press enter.
Repeat for the next set of column guides on the left page, but this time move .125 instead of .0625. Repeat both moves on the right page, but instead of adding .0625 and .125, subtract those amounts so the guides move to the left.
Your column and margin guides now define the safe zones, and your panels should be correctly sized for folding, so you can re-lock the guides and move tothe actual document pages to do the layout.
Peter

Is there a way to increase the font size for the "songs" and "artists" lists in the new music app for iPad 2 (iOS 5)? It is too small for me.

Is there a way to increase the font size for the "songs" and "artists" lists in the "music" app for iPad 2 (iOS 5)? It is smaller than the previous version.

falkner09 wrote:
is there really no fix for this?
It would depend on your definition of "Fix"
Your iPod touch running OS 4.2 has a ZOOM feature which will enable you to see the screen more clearly.
To turn Zoom on or off got to:
Settings > General > Accessibility > Zoom and tap the Zoom On/Off switch.
_To Zoom in or out_:
Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPod touch automatically returns to that magnification when you zoom in by double-tapping with three fingers.
Increase magnification: With three fingers, tap and drag toward the top of the screen (to increase magnification) or toward the bottom of the screen (to decrease magnification). The tap-and-drag gesture is similar to a double-tap, except you don’t lift your fingers on the second tap—instead, drag your fingers on the screen. Once you start dragging, you can drag with a single finger.
_Move around the screen_:
When zoomed in, drag or flick the screen with three fingers. Once you start dragging, you can drag with a single finger so that you can see more of the screen. Hold a single finger near the edge of the display to pan to that side of the screen image. Move your finger closer to the edge to pan more quickly. When you open a new screen, Zoom always goes to the top-middle of the screen.
_Large Text_:
Large Text lets you make the text larger in alerts, and in Calendar, Contacts, Mail, Messages, and Notes. You can choose 20-point, 24-point, 32-point, 40-point, 48-point, or 56-point text.
Set the text size: In Settings, choose General > Accessibility, tap Large Text, then tap the text size you want.
I hope this has helped a little - other than this option I think it pretty much is what it is.
BTW - This information can be found on page 208 of the iPod Touch iOS 4.2 Users Guide.
Best wishes..
Ricky

Increase the size of the cache using the cache.size= number of pages ?

Hi All,
I am getting this error when I do load testing.
I have Connection pool for Sybase database that I am using in my JPD. I am using Database control of weblogic to call the Sybase Stored procedure.
I got following exception when I was doing load testing with 30 concurrent users.
Any idea why this exception is coming ?
thanks in advance
Hitesh
javax.ejb.EJBException: [WLI-Core:484047]Tracking MDB failed to acquire resources.
java.sql.SQLException: Cache Full. Current size is 2069 pages. Increase the size of the cache using the cache.size=<number of pages>
     at com.pointbase.net.netJDBCPrimitives.handleResponse(Unknown Source)
     at com.pointbase.net.netJDBCPrimitives.handleJDBCObjectResponse(Unknown Source)
     at com.pointbase.net.netJDBCConnection.prepareStatement(Unknown Source)
     at weblogic.jdbc.common.internal.ConnectionEnv.makeStatement(ConnectionEnv.java:1133)
     at weblogic.jdbc.common.internal.ConnectionEnv.getCachedStatement(ConnectionEnv.java:917)
     at weblogic.jdbc.common.internal.ConnectionEnv.getCachedStatement(ConnectionEnv.java:905)
     at weblogic.jdbc.wrapper.Connection.prepareStatement(Connection.java:350)
     at weblogic.jdbc.wrapper.JTSConnection.prepareStatement(JTSConnection.java:479)
     at com.bea.wli.management.tracking.TrackingMDB.getResources(TrackingMDB.java:86)
     at com.bea.wli.management.tracking.TrackingMDB.onMessage(TrackingMDB.java:141)
     at com.bea.wli.management.tracking.TrackingMDB.onMessage(TrackingMDB.java:115)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:370)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:262)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2678)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

hitesh Chauhan wrote:
Hi All,
I am getting this error when I do load testing.
I have Connection pool for Sybase database that I am using in my JPD. I am using Database control of weblogic to call the Sybase Stored procedure.
I got following exception when I was doing load testing with 30 concurrent users.
Any idea why this exception is coming ?
thanks in advance
Hitesh Hi. Please note below, the stacktrace and exception is coming from the
Pointbase DBMS, nothing to do with Sybase. It seems to be an issue
with a configurable limit for PointBase, that you are exceeding.
Please read the PointBase configuration documents, and/or configure
your MDBs to use Sybase.
Joe
>
javax.ejb.EJBException: [WLI-Core:484047]Tracking MDB failed to acquire resources.
java.sql.SQLException: Cache Full. Current size is 2069 pages. Increase the size of the cache using the cache.size=<number of pages>
     at com.pointbase.net.netJDBCPrimitives.handleResponse(Unknown Source)
     at com.pointbase.net.netJDBCPrimitives.handleJDBCObjectResponse(Unknown Source)
     at com.pointbase.net.netJDBCConnection.prepareStatement(Unknown Source)
     at weblogic.jdbc.common.internal.ConnectionEnv.makeStatement(ConnectionEnv.java:1133)
     at weblogic.jdbc.common.internal.ConnectionEnv.getCachedStatement(ConnectionEnv.java:917)
     at weblogic.jdbc.common.internal.ConnectionEnv.getCachedStatement(ConnectionEnv.java:905)
     at weblogic.jdbc.wrapper.Connection.prepareStatement(Connection.java:350)
     at weblogic.jdbc.wrapper.JTSConnection.prepareStatement(JTSConnection.java:479)
     at com.bea.wli.management.tracking.TrackingMDB.getResources(TrackingMDB.java:86)
     at com.bea.wli.management.tracking.TrackingMDB.onMessage(TrackingMDB.java:141)
     at com.bea.wli.management.tracking.TrackingMDB.onMessage(TrackingMDB.java:115)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:370)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:262)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2678)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

What is the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw)?

I need to find the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw).
This question was solved.
View Solution.

Good question.
That I don't have a definite 100% answer to.
It probably is OK. Wattage is what it is rated at. More wattage is probably a good thing, and I have read that = or - .5v is not supposed to be an issue.
You can do a google search of the part number for your power adapter and see if they still carry it, if you are concerned.
Paul

What is the correct part number for the LCD inverter board for an A1138 15" powerBook G4 ( 1.67GHz superdrive/ Hi-res)?

What is the correct part number for the LCD inverter board for an A1138 15" PowerBook G4 ( 1.67GHz superdrive/ Hi-res model)?

Hello,
Part number 614-0305-A
Hope this helps.

Is there a maximum program size for the AWM GUI?

Is there a maximum program size for the AWM GUI?
I have a program that I migrated from Oracle Exress to Oracle 9i. The program runs fine, but I get buffer errors whenever I edit it with the Analytic Workspace Manager GUI. Only my longest program has this problem.
Has anyone seen this before? Is there a fix/workaround?
Thank you,
James

This problem is solved with the 10.0.0.1.0 AWM client, which is on the 10G CD.
James

How do I determine the correct sales org for the employee?

Hi
The requirement here is to determine the correct sales org for the employee logged in when creating an activity (a customer visit). We know that all employees will belong to one sales org.
On this basis, in the organisational data determination I have maintained the organisational data profile Z0001 with the Organisational Model Determination Rule: 10000162 (employees for responsible org. unit). I have left the Responsibilities Determination Rule empty. I am not sure if both have to be filled. Can anyone explain the difference between the two?
I have checked the sales organisation and distribution channel. This is for the sales scenario.
I simulated this rule in Maintain Determination Rules. I entered the Sales Org and no agents (employees) were found.
The org data profile Z0001 has been assigned to the transaction.
The Object Permitted in Determination has been checked for the sales scenario in the Organisational Model.
Regards
Declan

Hi PePe
I made the change and it worked as I wanted it. Thanks a lot.
You say there's no need to Maintain the Responsibilities Rule. Can I ask what this section does and why it can be one or the other?
Regards
Declan

For the iPad, using OS 7.02, how do you now close an application?

For the iPad, using OS 7.02, how do you now close an application? When I double click, go to the task bar and touch on the icon, it no longer gives me the option to close the application. Do you no longer need to quite an application?

Double tap the home button and swipe upwards on the preview of the App (not the App Icon)

Set global font size for the whole application.

Is there a way of setting a font globally
What I mean I want to set a font size for the whole application.
Is this posable ??
Thanks Craig

After posting over 300 questions I would think you would be passed the "New to Java TechnologY" stage.
The answer for Swing applications is yes this can be done.
I don't know how to do it for AWT components.
Since you posted the question in this forum (as oppose to the Swing forum for Swing related problems), I'm assuming this is an AWT related question and therefore I can't help you.

Warning: "No terminating events defined for the task used"

Dear all,
I created a task with ABAP class and method as its object method. This task is a background task. The ABAP class inherits the IF_WORKFLOW interface but doesn't implement any method of the interface.
When I try to confirm the task settings in transaction SWDD, a message shows up "No terminating events defined for the task used" and I cannot continue the work. Does anybody have any idea what I should do?
Thanks + Best Regards
Jerome

Hi Jerome,
If you set a background task in your workflow, and if it is asynchronous, then you need some way to tell the template if it is finished and what happened. In this case you set terminating events - that is events which are published in the system as a result of your method (ie document.posted etc).
Either use a synchronous method for your task or set appropriate terminating events in your task setup.
Regards
Gareth

Correct MTU Size For The E4200 Using DSL?

Similar Messages

Maybe you are looking for