Correct practice for settings up an RDS Server alongside a WSE2012 server

Hi there,
I am configuring a new environment on Windows Server 2012. I would just like to discuss the correct/best practice for setting up a terminal server alongside a Windows Server Essentials 2012 Domain
We have the following setup
Windows Server 2012 STD Hyper - V Host, with two guests
Guest 1 Windows Server 2012 STD (Windows Server Essentials Experience Role)
Guest 2 Windows Server 2012 STD (Remote Desktop Services)
In my experience, such as in a SBS2011 / Server 2008 R2 RDS environment, there are specific requirements for correctly setting up for operating a TS/RDS alongside an SBS. Namely that the SBS needs to hold specific roles to function correctly, including the
RD gateway role.
Given the setup above, whats changed in server 2012? How should this be configured and in what order to ensure that it functions correctly, and so that users can access remote desktop sessions on the terminal server by using the RWW website operated by the
'Essentials Experience' component of the Windows Server 2012 Standard installation.
For your reference, we have done the following so far, but please consider your answers from a best practices perspective rather then what needs to be done to finalize my current configuration.
1. Install WS12STD on physical hardware and assigned Hyper V role
2. Install 2 virtual hyper-v instances of WS12STD
3. Added Essentials Experience role to Guest 1 and completed Essentials Configuration wizard (which setup domain)
4. Joined Guest 2 to the domain created by the Essentials Wizard. We initially joined the domain via the standard manual means (right click computer -> Properties -> Computer Name). Domain join was successful but the server did not show up in the essentials
dashboard under devices so we went back and ran the Connect wizard as if it were a client computer not a server. Not really sure if this was the right thing to do, in the past you added the server to an SBS domain manually, then moved the server to the SBSServers
OU under the Domain Users and Computers snap in, after which it would show up in the SBS Console, this didnt seem to happen with WS2012. The connect wizard went smoothly without complaints and the server showed up in the Essentials Dashboard right away including
information on update statuses ETC.
5. Configured Guest 2 for RDS using RDS Quick Setup wizard, we did not add it as a role via standard means as research indicated that the new simplified management snap in (tile?) would not work if we did this. Instead we selected the second option in the
"Add Roles" wizard titled "Remote Desktop Services. We selected Quick Setup and we chose Session-Based configuration
6. After the RDS wizard was completed, we recieved notification regarding the licensing server ETC. Normal so far. Under the new windows server 2012 management tile(?) for RDS we can see the map of the "Deployment Overview". It has large +
icons next to RD Gateway and RD Licensing, whilst RD Web Access, RD Connection Broken, RD VIrtualization Host, and RD Session Host have icons.
So far, this seems good. So if nothing above is magorly wrong, whats next?

Hi Paul,
Thank you for posting in Windows Server Forum.
From your whole description it seems your setup was good and configured properly. Now for your further question, “whats next?” I would like to know that; which particular task\operation you want to perform. You need to see that you have to install RD Licensing
role, activate the license server and also need to purchase CAL and activate it. You can get details information from beneath article.
1. Windows Server 2012 Essentials - Remote Desktop Services
2. Using the Remote Desktop Services BPA to analyze a Remote Desktop Gateway
implementation
3. Using Windows Server 2012 Essentials with more than 25 users
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

Best practice for RDGW placement in RDS 2012 R2 deployment

Hi,
I have been setting up a RDS 2012 R2 farm deployment and the time has come for setting up the RDGW servers. I have a farm with 4 SH servers, 2 WA servers, 2 CB servers and 1 LS.
Farm works great for LAN and VPN users.
Now i want to add two domain joined RDGW servers.
The question is; I've read a lot on technet and different sites about how to set the thing up, but no one mentions any best practices for where to place them.
Should i:
- set up WAP in my DMZ with ADFS in LAN, then place the RDGW in the LAN and reverse proxy in
- place RDGW in the DMZ, opening all those required ports into the LAN
- place the RDGW in the LAN, then port forward port 443 into it from internet
Any help is greatly appreciated.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights

Hi,
The deployment is totally depends on your & company requirements as many things to taken care such as Hardware, Network, Security and other related stuff. Personally to setup RD Gateway server I would not prefer you to select 1st option. But as per my research,
for best result you can use option 2 (To place RDG server in DMZ and then allowed the required ports). Because by doing so outside network can’t directly connect to your internal server and it’s difficult to break the network by any attackers. A perimeter
network (DMZ) is a small network that is set up separately from an organization's private network and the Internet. In a network, the hosts most vulnerable to attack are those that provide services to users outside of the LAN, such as e-mail, web, RD Gateway,
RD Web Access and DNS servers. Because of the increased potential of these hosts being compromised, they are placed into their own sub-network called a perimeter network in order to protect the rest of the network if an intruder were to succeed. You can refer
beneath article for more information.
RD Gateway deployment in a perimeter network & Firewall rules
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SAP Best Practices for Data Migration :repositories only on MS SQL Server ?

Hi,
I'm implementing the "SAP Best Practices for Data Migration" (see https://websmp109.sap-ag.de/bp-datamigration).
As part of the installation you have to install MS SQL Server Express Edition. The installation guide contains detailed steps to do this. All repositories for Data Services should be running on SQL Server, according to the installation guide.
The customer I'm working for now does not want to use SQL Server, but DB2, as company standard.
So I use DB2 for the local and profiler repositories.
I notice however that the web application http://localhost:8080/MigrationServices does not support DB2.The only database type you can select in the configuration area is MS SQL Server.
Is this a limitation, a by design ?

Hans,
The current release of SAP Best Practices for Data Migration, v1.32, supports only MS SQL Server. The intent when developing the DM content was to quickly set up a temporary, standardized data migration environment, using tools that are available to everyone. SQL Server Express was chosen to host the repositories, because it is easy to set up and can be downloaded for free. Sone users have successfully deployed the content on Oracle XE, but as you have found, the MigrationServices web application works only with SQL Server.
The next release, including the web app, will support SQL Server and Oracle, but not DB2.
Paul

Best practices for data migration

Hi All,
This thread is useful for those who can use their opportunity to share the ideas and knowledge for making better and best use of data migration using Business Objects Data Services.

Hans,
The current release of SAP Best Practices for Data Migration, v1.32, supports only MS SQL Server. The intent when developing the DM content was to quickly set up a temporary, standardized data migration environment, using tools that are available to everyone. SQL Server Express was chosen to host the repositories, because it is easy to set up and can be downloaded for free. Sone users have successfully deployed the content on Oracle XE, but as you have found, the MigrationServices web application works only with SQL Server.
The next release, including the web app, will support SQL Server and Oracle, but not DB2.
Paul

Best practice for licence server for RDS Farm & Certificate errors

Hello,
I am in the process of creating an RDS farm using Server 2008 R2. I have three Session Hosts and a Connection Broker.
I have a set of 10 user CALs available and also another 20 on our current RDS server which will need migrating once we go live with the farm.
I understand the User CALs need to be installed on another Server 2008 R2 and I am wondering what is best practice. We are running on an entirely virtual environment and it would be simple enough to create another server and install the CALs on there.
The only issue with that is that I would need to create a replica of this new machine for DR purposes, but this would take up valuable space which may not be necessary.
We are planning on creating replicas of one of the Session hosts and the broker for DR, so I am guessing I would need to install some CALs on the Session Host which is going to be replicated.
There are a few options and I am just wondering what is the best way to go about things.
Also, as an aside, I am getting an annoying certificate error each time I log a test user onto the RDS farm - I think this is because I am using the DNS alias of the RDS Farm to log on. Is there an easy way to get around this, other than the 'Do not show
this message again'. I have been doing some research and the world of Certificates is very confusing!!
Thanks,
Caroline
C.Rafferty

Hi Caroline,
Firstly for your License related issue, you can perform the step on any VM or can create the new VM as replica for RDSH server also. But please be sure that you have installed RD License server on it, activate it and then install RDS CAL on it. But be safe
if possible don’t install RD License server with RDCB, please make that out of it as little away. As you can also install RD License server with AD or make replica of that and install RDL on that.
Best practices for setting up Remote Desktop Licensing (Terminal Server Licensing) across Active Directory Domains/Forests or Workgroup
http://support.microsoft.com/kb/2473823
What’s the specified certificate error which you are receiving?
If you're going to allow users to connect externally and they will not be part of your domain, you would need to deploy certificates from a public CA. In meantime you can refer blog for getting insight for certificate case.
Certificate Requirements for Windows 2008 R2 and Windows 2012 Remote Desktop Services
http://blogs.technet.com/b/askperf/archive/2014/01/24/certificate-requirements-for-windows-2008-r2-and-windows-2012-remote-desktop-services.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

(Request for:) Best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC

Could you please share your best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC, that will be running on a new WinSrv 2012 r2 host server. (This
will be for a brand new network setup, new forest, domain, etc.)
Specifically, your best practices regarding:
the sizing of non virtual and virtual volumes/partitions/drives,
the use of sysvol, logs, & data volumes/drives on hosts & guests,
RAID levels for the host and the guest(s),
IDE vs SCSI and drivers both non virtual and virtual and the booting there of,
disk caching settings on both host and guests.
Thanks so much for any information you can share.

A bit of non essential additional info:
We are small to midrange school district who, after close to 20 years on Novell networks, have decided to design and create a new Microsoft network and migrate all of our data and services
over to the new infrastructure . We are planning on rolling out 2012 r2 servers with as much Hyper-v virtualization as possible.
During the last few weeks we have been able to find most of the information we need to undergo this project, and most of the information was pretty solid with little ambiguity, except for
information regarding virtualizing the DCs, which as been a bit inconsistent.
Yes, we have read all the documents that most of these posts tend point to, but found some, if not most are still are referring to performing this under Srvr 2008 r2, and haven’t really
seen all that much on Srvr2012 r2.
We have read these and others:
Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100),
Virtualized Domain Controller Technical Reference (Level 300),
Virtualized Domain Controller Cloning Test Guidance for Application Vendors,
Support for using Hyper-V Replica for virtualized domain controllers.
Again, thanks for any information, best practices, cookie cutter or otherwise that you can share.
Chas.

Single server solution for RDS / TS / RDP using Windows Server 2012 R2

Planning on setting up a small single server and need this functionality:
* 3 local users runnnig Windows 7 Home Premium needs to access files on the server
* The same 3 users should also be able to connect from home (PC, Mac, iPhone) and run an application on the server. (Session-Based Remote Desktop).
We want to use Windows Server 2012, and found out that Essentials does not support RDP, so that leaves Foundation and Standard versions.
However, I also found out that in WS 2012 the RDP can not be on the same server as the Domain Controller, and we therefor needs to run 2 server instances on our hardware. I think this starts to look way to complicated for what we want to do, but found out
that WS 2012 R2 allows a single server to run RDP (See TechNet article 2833839).
So we will go for Windows Server 2012 R2, either Foundation or Standard to set up our RDP.
So now the question: Will that solution work with our local machines running Windows 7 Home Premium, as they cannot connect to a domain? Can we set up some kind of simple file share or Workgroup to acces files locally while still keeping the RDP
functionality on the server?
And, will WS 2012 Foundation R2 do this as well as WS 2012 Standard R2?
(I have been asking several locat MS representatives to find a solution to our needs, but no one seems to know how this works....of cause we could just get 2 WS 2012 Standard server instances, run one as DC and on as RDCB and upgrade all our clients to Win
7 Pro, but we would like a solution with minimal investment in time and money)
Rgds
Petter

Hi Ryan,
and thanks for the answer! I do not know how to do "multiple quote" in this forum so I do it this way:
"have you considered virtualisation, as you can run multiple virtual machines under one licence. I think this would be the cheapest and most efficient use of your money. Upgrading your clients to Windows 7 pro would allow you to have domain control
Single Sign On SSO. "
This is the "official" solution I think: Upgrade all clients to Win 7 Pro and run two instances of Win Server 2012 Standard on the server.
However, I was hoping to get away with something a bit more Quick & Dirty.....;-) We do not have big security issues and will have a good backup system, and I think for 3 users only, it will be more work trying to centralise administration like updating,
backups etc, than to just go to each machine and do what is needed.
We are good with computers/Windows but have no Server experience. A server guy will help us get started, but I dont want him around after that, so it must be a very simple solution.
Also, installing 2 instances of WS 2012 and upgrading all 3 clients to Win Pro, and then installing all software and settings on the clients into the new domain user accounts on these clients is quite a lot of work. So I was hoping to keep only existing local
users on the client machines and only have some kind of file share thing going on with the server disks that we need to access. So perhaps use a Workgroup instead of a domain, if that works with the RDS setup?
"Option 1
2 virtual machines 1x DC and 1x RDS server."
So, if we set up RDS this way (so we can log in remote and run our application session-based on the server), can we keep the local clients running Windows Home Premium using our current local user logins (ie no domain user accounts created on the client machines,
as this is impossible in Home versions) and still access the server disks somehow, or is it impossible?
Another question is if it is stupid/a really bad solution...but I still want to know if it is possible....;-)
"Option 2
2 virtual machines 1x DC and 1x RDS server.
You can configure your RDS solution as a domain joined platform and will still be able to access resources from the local device as you can map local drives to the session host. http://www.serverintellect.com/support/techfaq/drive-rdp/
Your users would have two sets of credentials, one for the local client and one for the domain."
I do not want to access files over VPN or RDP, we only want to run an application on the server from remote (Session-Based Remote Desktop). However when we use the local clients we want to access files on the server, and then we access huge image and film files
on fast RAID drives, so local network speed must be top speed. Also if possible we would like to not upgrade to Win Pro, and then joining a domain is not possible.
"Option 3
1x Server
The second option would be to manually deploy the session host role and licencing role to a work group server. This would limit access to RDP only and you would loose web access functionality."
I think this is what I was hoping for. It seems that the new R2 release of WS 2012 allows you to rund RDP and Domain Controller roles on the SAME instance of the server. That sounds nice, it limits what we need to keep track on and minimises the load on the
server that needs to act as a very fast file server locally.
However, can we do this and still keep file acces with only Windows Home (no domain) in the local clients (same question as above under "Option 1")?
Rgds
Petter

Best practices for Edit Proxies in Final Cut Server?

We just bought Final Cut Server, and for the most part are pretty happy with the product. We are a small production facility, and primarily work with DVCPro HD footage at 720P. One feature we'd like to use would be the edit proxies feature in FCS, but they don't seem to be working for us.
_Hosting Computer_
We're using a mac mini server with snow leopard server and final cut server 1.5.
Problem
Whenever we specify in the Administrator Pane of FCS, Under Preferences and Analyze, we'd like to use a custom transcode setting for the edit proxies, keeping Frame Size, TC, and Frame rate the same, but changing the codec to h264 least quality, the effects are a different compression than expected. We tested out the compression settings using Compressor on the server, and we get the desired results:
Input: DVCPro HD 720P Quicktime 960X720 (1248 x 702) 23.98 fps
Output: H264 Quicktime 960X720 (1248 x 702) 23.98 fps
Also did the same outputs using Apple Prorez, Photo Jpeg and got the following outputs:
Output: Apple Prorez Quicktime 960X720 (1248 x 702) 23.98 fps
Output: Photo Jpeg Quicktime 960X720 (1248 x 702) 23.98 fps
(We also made new transcode settings for these compressor settings and we not able to control the compressions through FCS with these settings as well. Our target codec is H264.)
After connecting the new compression settings on the Mac Mini Server to a new transcode setting in the FCS Admin Pane, we restarted the Java Client, logged in to FCS as an FCSadmin, opened the Admin Pane, and under preferences/analyze change the edit proxy setting to the New H264 setting that worked perfectly when using Compressor. After uploading a final cut project, with one associated media file (DVCPro HD 720P Quicktime 960X720 (1248 x 702) 23.98 fps), the resulting edit proxy did not match the specification: 384 x 216, 23.98fps, TC matches source.
Also did not dynamically connect when checking out the project from FCS and selecting edit proxies and keep media with project and saving to the desktop.
Question 1:
Does anyone have any best practice transcode setting(s) to create for DVCPro HD 720P using edit proxies that dynamically connect and are smaller size than the original? H264? Photo Jpeg?
Question 2:
Why is Final Cut Server's Compressor giving a different output, when the same settings work well with just Compressor?
Question 3:
Does H264 work in creating dynamically linking edit proxies (ie, no need to reconnect)?
I can imagine this information to be very useful to the community, so any input or solutions will be greatly appreciated.
Thank you.

H.264 is a puzzling choice of codec for edit proxies. H.264 is not an edit-friendly codec since it is a complex long-GOP structure and will require a ton of rendering just to play back the timeline. ProRES 422 Proxy would be a much better choice for editing. I'm afraid I can't account for the differences between Compressor and FCServer in this case, but my gut tells me the non-I-frame codec you are trying to use for edit proxies might have something to do with it. Maybe for an edit-proxy workflow to operate properly on the server-side the codec must be I-frame? Is there any reason you do not want to use ProRES 422 Proxy? They are about 1/3 the footprint of 720p24 DVCPRO-HD, which is already very efficient. For that frame rate and frame size they would be roughly half the heft of good ol' DV25.
So my answer to all three questions would be to try ProRES 422 Proxy for your edit proxies and see if everything lines up.

Best Practice for SUP and WSUS Installation on Same Server

Hi Folks,
I have a question, I am in process of deploying SCCM 2012 R2... I was in process of deploying Software Update Point on SCCM with one of the existing WSUS server installed on a separate server from SCCM.
A debate has started with of the colleague who says that the using remote WSUS server is recommended by Microsoft because of the scalability security that WSUS will be downloading the updates from Microsoft and SCCM should be working as downstream
server to fetch updates from WSUS server.
but according to my consideration it is recommended to install WSUS server on the same server where SCCM is installed... actually it is recommended to install WSUS on a site system and you can used the same SCCM server to deploy WSUS.
please advice me the best practices for deploying SCCM and WSUS ... what Microsoft says about WSUS to be installed on same SCCM server OR WSUS should be on a separate server then the SCCM server ???
awaiting your advices ASAP :)
Regards, Owais

Hi Don,
thanks for the information, another quick one...
the above mentioned configuration I did is correct in terms of planning and best practices?
I agree with Jorgen, it's ok to have WSUS/SUP on the same server as your site server, or you can have WSUS/SUP on a dedicated server if you wish.
The "best practice" is whatever suits your environment, and is a supported-by-MS way of doing it.
One thing to note, is that if WSUS ever becomes "corrupt" it can be difficult to repair and sometimes it's simplest to rebuild the WSUS Windows OS. If this is on your site server, that's a big deal.
Sometimes, WSUS goes wrong (not because of ConfigMgr)..
Note that if you have a very large estate, or multiple primary site servers, you might have a CAS, and you would need a SUP on the CAS. (this is not a recommendation for a CAS, just to be aware)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Best Practice for serving static files (gif, css, js) from front web server

I am working on optimization of portal performance by moving static files (gif, css, js) to my front web server (apache) for WLP 10 portal application. I end up with moving whole "framework" folder of the portal WebContent to file system served by apache web server (the one which hosts WLS plugin pointing to my WLP cluster). I use <LocationMatch> directives for that:
Alias /portalapp/framework "/somewhere/servedbyapache/docs/framework"
<Directory "/somewhere/servedbyapache/docs/framework">
<FilesMatch "\.(jsp|jspx|layout|shell|theme|xml)$">
Order allow,deny
Deny from all
</FilesMatch>
</Directory>
<LocationMatch "/partalapp(?!/framework)">
     SetHandler weblogic-handler
     WLCookieName MYPORTAL
</LocationMatch>
So, now browser gets all static files from apache insted of the app server. However, there are several files from bighorn L&F, which are located in the WLP shared lib: skins/bighorn/ window.css, wsrp.css, menu.css, general.css, colors.css; skins/bighorn/borderless/window.css; skeletons/bighorn/js/ util.js, buttons.js; skeleton/bighorn/css/layout.css
I have to merge these files into the project and physically move them into apache served file system to make mentioned above apache configuration works.
However, this approach makes me exposed bunch of framework resources, which I do not to intend to change and they should not be change (only custom.css is the place to make custom changes to the bighorn skin). Which is obviously not very elegant solution. The other approach would be intend to create more elaborate expression for LocationMatch (I am not sure it's entirely possible giving location of these shared resources). More radical move - stop using bighorn and create totally custom L&F (skin, skeleton) - which is quire a lot of work (plus - bighorn is working just fine for us).
I am wondering what is the "Best Practice Approach" approach recommended by Oracle/BEA - giving the fact that I want to serve all static files from my front end apache server instead fo WLS app server.
Thanks,
Oleg.

Oleg,
you might want to have a look at the official WLP performance support pattern (Metalink DocID 761001.1 ) , which contains a section about "Configuring a Fronting Web Server Serving WebLogic Portal 8.1 Static Artifacts ".
It was written for WLP 8.1, but most of the settings / recommendations should also to WLP 10.
--Stefan

Best Practice for a Print Server

What is the best practice for having a print server serving over 25 printers 10 of which are colour lasers and the rest black and white lasers.
Hardware
At the moment we have one server 2Ghz Dual G5 with 4GB Ram and xserve RAID. The server is also our main Open directory server, with about 400+ clients.
I want to order a new server and want to know the best type of setup for the optimal print server.
Thanks

Since print servers need RAM and spool space, but not a lot of processing power, I'd go with a Mac Mini packed with ram and the biggest HD you can get into it. Then load a copy of Xserver Tiger on it and configure your print server there.
Another option, if you don't mind used equipment, is to pick up an old G4 or G5 Xserve, load it up with RAM and disk space, and put tiger on that.
Good luck!
-Gregg

Best practice for install oracle 11g r2 on Windows Server 2008 r2

Dear all,
May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
Just grant Full for Administrators and System and remove permissions for all others accounts?
Also how should I configure windows firewall to allow client connect to the database.
Thanks for your help.

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Symantec antivirus Best practice for oracle database on windows server 2003

Hi all,
I have an oracle database server on windows server 2003 platform of version 10.2.0.4. what would be best practice of running symantec antivirus on that server as well as database file exclusions from scanning them.
My server had rebooted unexpectedly for many times. in event log i have id as 6008. what may be cause of it..?

Normally, you don't run a virus scanner on a database server because your database server isn't vulnerable to viruses. It's behind firewalls, people aren't reading mail on it, people aren't plugging thumb drives into it, etc. If you do decide that you need to run a virus scanner on a database server, at least exclude the Oracle data files from the scan. Oracle gets very unhappy if someone else tries to open its data files (or, worse, if someone opens a data file before it gets the chance to acquire exclusive access).
Justin

Best practice for server configuration for iTunes U

Hello all, I'm completely new to iTunes U, never heard of this until now and we have zero documentation on how to set it up. I was given the task to look at best practice for setting up the server for iTunes U, and I need your help.
*My first question*: Can anyone explains to me how iTunes U works in general? My brief understanding is that you design/setup a welcome page for your school with sub categories like programs/courses, and within that you have things like lecture audio/video files and students can download/view them on iTunes. So where are these files hosted? Is it on your own server or is it on Apple's server? Where & how do you manage the content?
*2nd question:* We have two Xserve(s) sitting in our server room ready to roll, my question is what is the best method to configure them so it meets our need of "high availability in active/active mode, load balancing, and server scaling". Originally I was thinking about using a 3rd party load balancing device to meet these needs, but I was told there is no budget for it so this is not going to happen. I know there is IP Failover but one server has to sit in standby mode which is a waste. So the most likely scenario is to setup DNS round robin and put both xserves in active/active. My question now is (this maybe related to question 1), say that all the content data like audio/video files are stored by us, (We are going to link a portion of our SAN space to Xserve for storage), if we are going with DNS round robin and put the 2 servers in Active/Active mode, can both servers access a common shared network space? or is this not possible and each server must have its own storage space? And therefore I must use something like RSYNC to make sure contents on both servers are identical? Should I use XSAN or is RSYNC good enough?
Since I have no experience with iTunes U whatsoever, I hope you understand my questions, any advice and suggestion are most welcome, thanks!

Raja Kondar wrote:
wht is the Best Practice for having server pool i.e
1) having a single large serverpool consisting of "n" number of guest vm
2) having a multiple small serverpool consisting of less of number of guest vm I prefer option 1, as this gives me the greatest amount of resources available. I don't have to worry about resources in smaller pools. It also means there are more resources across the pool for HA purposes. Not sure if this is Official Best Practice, but it is a simpler configuration.
Keep in mind that a server pool should probably have up to 20 servers in it: OCFS2 starts to strain after that.

Correct practice for settings up an RDS Server alongside a WSE2012 server

Similar Messages

Maybe you are looking for