Correct preset for video captured from VHS tape

I have bought a cable which connects to my PC USB slot and has red, white and yellow component connections to connect to my (old) VCR or Video-8 format camera. It comes with software called ArcSoft ShowBiz that allows me to capture the footage. I have used it for both VHS tapes and Video-8 tapes. The only options I have when capturing are the filename and a choice of MPEG1 and MPEG2, with MPEG1 being the default.
I have successfully captured footage (in MPEG1 format) and now I want to edit it in PE10. The trouble is I do not know what preset to use. The VHS tapes were in PAL format. If I open a project as DV PAL and add the footage to the timeline it has a red line above it, which I assume means I will lose resolution when I render. The quality is already not great and I don't want to make it worse.
Any advice would be appreciated.

Most likely that footage will not work well or look good in Premiere Elements. The capture device you're using is a low-end digitizer and likely came with some software for editing (ArcSoft Shopbiz). It's designed to work pretty exclusively with that software.
MPEG1 is a very low quality format.
You can try using the project settings for Hard Disk Camcorder/Standard Defintion for that footage -- but I make no guarantees about the quality.
The best device for capturing analog video is a DV bridge, like the Canopus AVDC, as we discuss in this FAQ.
http://forums.adobe.com/thread/431853?tstart=0

Similar Messages

Audio quality in video imported from VHS tapes

Hi All,
I am trying to import old videos on VHS tapes, using a Canopus converter. The video is importing into iMovie just fine, but the audio has a loud buzzing sound that covers up the actual audio and is very annoying. Is there a way to extract the audio so I can clean it up using Sound Soap, then return the cleaned up version to iMovie?
I am using iMovie '09, version 8.0.5.
I also use Final Cut Express, so maybe it would be better to just export it to FCE and then extract the video from there?
Please give as much step by step detail as possible for both approaches. In the iMovie "Help" it said to extract audio using advanced tools, but I couldn't find a command in any of the advanced tools to do that.
Thanks.

Is there a way to extract the audio so I can clean it up using Sound Soap
iMovie 06 has some good filters for that.
I also use Final Cut Express, so maybe it would be better to just export it to FCE and then extract the video from there?
Final Cut Express (or iMovie 06) will give you better quality but it won't solve the buzzing noise. I also suspect a grounding problem.

How do I get Video from vhs tape into Imavie HD?

I am trying to back up some of my home movies from VHS tape to DVD. Is it possible to connect my vhs player to my mac? What kind of equipment do I need to do this inexpensively.
Richard

I don't think my camera has that connection. It's a JVC Mini DV camera- very inexpensive.I just purchased it recently. It has an Audio Video output connector, DC input, Digital Video Connector(DV in/out). Are there some inexpensive DVD/VHS combos available or am I better off with some sort of converter?
Richard

HT1014 I'm working with imovie 08 and converted movie originally from VHS tape to .m4v files imovie wouldn't recognize it. I converted to .mov files and imovie generated thumbnails (for hours) and shows a New Event but there is nothing there. Any help?

I'm working with imovie 08 on Macbook pro OS X and converted movie originally from VHS tape to .m4v files imovie wouldn't recognize it. I converted to .mov files and imovie generated thumbnails (for hours) and shows a New Event but there is nothing there. Any help?

markmc78 wrote:
.. I'm really struggling with the concept of events/clips/projects.
consider usage of a diff. editor.. iMovieHD6, you're entitled for a free downlaod at apple.com:
http://www.apple.com/support/downloads/imovieHD6.html
but IF you're relaxed, opened your mind, follow the bright light, ommmm.. for Events & Stuff:
your intended workflow will add another step of quality-degradition (8mm>>avi>>mp4>>iM08) ..
consider the free tool Mpeg Streamclip www.squared5.com for 'chopping' that 90min beast into pieces..
rename these new chunks, follow advice given on my site:
http://karsten.schluter.googlepages.com/im08changeeventdate
there's the manual..
http://manuals.info.apple.com/en/iMovie08_GettingStarted.pdf
and the most recommended books from Mr Pogue's Missing Manual series..

Capturing old VHS tapes

Hello.
Can anyone out there tell me the best way to capture old VHS tapes on to my imac? i.e. what software is best to use? What format is best? Best way to clean up the tapes/ machine before playing them? Basically any little tip and tricks for a good result.
I have searched and googled but cannot find information relavent to my set up. I have already imported quite a few tapes and the results vary from not too bad to terrible.
I would say that I have about 30 tapes that I want to go through and take bits from and am willing to give up a lot of time but only if the results are worth it. So far that has not been the case.
The set up I have at the moment is:
Hitachi VHS recorder (good one at the time)
Canopus advc-55
27" imac i7.
Also have Final Cut Express installed but find the capture/ achiving far easier in imovie.
Any help appreciated,
Pat.

Hi
Canopus advc-55 - should work OK
I use a Canopus ADVC-300 as this has two important (to me) features
• TimeBase correction - mend's small drop outs
The Capture doesn't halt
Audio is keept in sync - even when drop out frames
• Picture enhanzing
Then I prefer to use
• iMovie HD6 - and this set to Capture NOT in a cut up version as then drop out frames will trigger new clips (called save as individual clips in iMovie HD6 pref - I turn it off)
Else I don't need anything else.
Capturing in FinalCut Express or Pro - is more problematic to me as they are much more sencitive and halt's Import much easier. (Much more baby-sittings) - my notes on this following.
Analog to Mac/Digital
From
• S-VHS, VHS, VHS-C - Camera or VCR (VHS-C needs adaptor cassette - SVHS/VCR in such cases)
• Video 8, Hi8 ...........................................( Camera / Digital8 Camera or special VCR-player )
Can be done via
• Camera and tape or video trough (if present) (miniDV or Digital8)
• A/D-box
    Several brands (Must be FireWire)
        Canopus ADVC-55 (now Grass Valley ADVC-55) - (only on way)
        Canopus ADVC-110 (now Grass Valley ADVC-110) - (two ways)
        Canopus ADVC-300 (now Grass Valley ADVC-300) - (Timebase/code-correction)
        EyeTV
• VCR --> DVD (result needs conversion to be of use)
Captured/Imported by
• iMovie 1 to HD6
• iMovie’08 & 09 & 11
• FinalCut Express or Pro
• Final Cut Pro - X ( iMovie’11 Pro? )
• QuickTime Pro
• iDVD
SCART - Must use an SCART-adaptor with in and out switch. The one that came with Camera is one way. Camera ----> VCR/TV - not other way around.
RCA - Connect right way around
USING the S-Video out than RGB-video (Composite) from SCART will give a significantly better result !
Why
• Want to do a DVDs
• Want to edit
Connect VCR to A/D-box via SCART---RCA (EU) or via RCA---RCA (US) and set SCART switch to out (if used). The A/D-box may have an in resp. out side. Connect to in-side. Set A/D-box Input selector to Analog in.
My ADVC-300 has two sets of dip-switches on bottom - for PAL they are set to
Left one number 6 is set to on - all others in off state.
If 6 in off state then it is NTSC
From A/D-box via FireWire 6-pin to 6-pin or 9-pin end to Mac FW port.
Now turn A/D-box or Camera ON
Start iMovie or QT or FinalCut
Select Import or Capture
Re-wind tape in VCR or Camera
Start - Play on VCR or Camera
Import or Capture Now
See that the saved movie is collected on a hard disk with sufficient space
1 hour needs 13.5Gb
8 hour needs 105-110Gb (e.g. a 240VHS tape recorded in LP-mode)
How to store the material
• As is - Icon with a Star on it (iMovie HD6)
• As a set of DVDs
• Collected in a folder - FinalCuts Scratch folders + Movie document on an external/second hard disk
• As DiskImages
• Back to miniDV tapes
Do not use LP-mode with miniDV tapes. Two major problems.
a. When Camera dies - so does the tapes - Can’t be play-backed securely on other Camera even if
brand and type number is the same - the tolerances are to small
b. Audio goes out of sync due to 12-bit recording and/or drop outs in video makes video and audio
not walk in pace / parallel. Resulting in a very tough re-sync problem.
Yours Bengt W

I would appreciate some help in capturing some VHS tapes into PP-CS6.

Aloha,
Just loaded CS6 and my 1st project is to convert some VHS tapes into HD DVD's. The VHS player I'm using has R/G/B Component video out & HDMI in/out. My PC video card is a Radeon 6750 with 1 x HDMI (in use for my monitor), 1 x DVI-I, and 1 x D-SUB. My mobo, a Gigabyte GA-MA78GN-US2H, has 1x D-SUB, 1 x DVI-D, & 1 x HDMI. I don't believe I can use both HDMI slots simultaneously. I'm not even sure I can use any of the onboard graphica ports while I'm using an external video card.
So my questions are; 1) which available graphic port on the video card will offer me the best VHS tape capture? 2) what are the capture settings (i.e. frame rate & resolution of most VHS tapes either home recorded or professionally recorded) that I should use?
Mahalo-n-aloha from the big Island where the water is always warm and clear, and where now (Jan-March) the Humpback Whales play.
konadon

Usually, video ports on a video card or motherboard are out only. You would need a capture card, or external box to get VHS video digitized into your computer.
For VHS tapes, I would recommend getting a Hauppauge HD-PVR available here: http://www.hauppauge.com/site/products/data_hdpvr.html
It would save you a lot of headaches and make your job much easier.
If you'd like specifics: the HD-PVR has component inputs with optical audio, along with S-video and composite connections.
I've used it to capture many VHS tapes, and never had a problem.
Good luck!

Correct settings for HDV capture

Hi. I'm using Premiere CS5.5. I went on a few forums to get the correct settings for HDV capture.
I can record the footage fine. However I saw a few things which didn't seem right.
After capturing the HDV footage, the file was a .mpeg file. Secondly, the clip was 1 hour and 10 minutes and
it was only 11.3 GB. Does this sound right? A 55 minute .avi file is 11.6GB. I thought a HDV clip would be quite a large size file.
If this dosen't sound right, is there somewhere I could go to, to check that my settings are correct? By the way I'm filming and capturing with a Canon XHA1.
The footage is 1080i. HDV. I've exported it and it looks fine. Just want to make sure I've captured it correctly and to the best quality.
Thanks for your help.

The HDV format was advanced by Sony and others to use the same miniDV tapes used for SD. In fact, your Canon XHAI can record and play either without changing the tape transport speed.
Your observation in relative file sizes is due to the fact that HDV is highly compressed (MPEG), whereas, SD (AVI) is not as highly compressed. This is one of the reasons folks (such as Harm) don't consider HDV to be an edit format, but just a delivery format.
Note that what Harm was saying is symantics--you capture an analog source through a capture card that digitizes it. When you transfer a image file from HDV or SD, it is already digitized, so a bit-to-bit transfer occurs.

Computer set up for video capture

I believe there are special setting of the computer for video capture. I have done these in the past but cannot remeber how or find any info. One setting was to send the data form the camcorder straight to the hard disc. Can anyone help me, please ?
johnjep

If you're capturing from a tape-based camcorder, you should capture over FireWire.
For hard drive camcorders, you'll need to use the Media Downloader built into Premiere Elements to get the video files.
Current computers can usually capture with no special set-up. Although Vista can use a bit of tweaking, as you can see if you click on the FAQs listed to the right of this forum.
If you've got a second hard drive, you can get the most efficient capture by capturing to it rather than your C drive.

Incorrect and Un-Changeable 'Video Kind' for Videos Purchased From iTMS

Since I can't seem to find any other way to contact Apple except through paid support channels, their suggestion is to post something here. Hopefully this re-wording of other posts I've read will shed more light on the problem.
To Apple:
Some videos purchased from the iTunes music store have an incorrect 'Video Kind' which means they are sorted incorrectly in iTunes using Apple's new interface in version 7.
Old Battlestar Galactica episodes have a 'Video Kind' of 'Movie' instead of 'TV Show', so they don't appear in the iTunes smart category as TV shows. They appear in 'Movies', and they shouldn't.
The field for these files is locked/ghosted/unchangeable, I'm assuming because of ridiculous DRM requirements or an oversight. But you are enforcing rules which cause your program to incorrectly sort files, and not allowing your customers to fix the problem.
I want all my TV shows to list in your 'TV Shows' top category, but I can't change the 'Video Kind' for those files (bought via the iTunes music store). I have expected this problem to work itself out in the last few iTunes updates, but it hasn't yet. And there are many threads about this in your discussion forums.
Please unlock the 'Video Kind' field in iTunes for videos downloaded from the iTunes music store (Prison Break Season 1, Battlestar Galactica, The Office Season 1, Surface, etc), or give us some kind of utility that will allow us to correct the mis-categorization.
Thank you!
-Tony

I quite agree. I'm not sure how much attention, if any, the iTunes dev. team pay to these groups however. The formal feedback route is via iTunes Feedback, where sadly, I suspect, not much attention is paid either.
tt2

Transmiting video captured from a webcam to another system through internet

Hi there, I developed an application catch video stream from the webcam and transmit it another system within LAN network , I would like know possibility to senting it over internet to another system?? is it possible sent this streams to more than one location simultaneously. Any idea?
Best regards
anoop

hi tony
Thank you very much for reply, I very appreciate this.for tansnsmitting video using rtp protocol we need to specify the network output for media transmission(ie Medialocator).what i mean is we need to create a medialocator specifing the destination of our broadcast. which look like a typical url rtp://address:port/content-type ,here the address is the address to which video must be tansmitted.to transmit in unicast mode this address should be the address of the intended machine.its working fine.to transmit in mulitcast mode with a subnet we can do this by replacing 255 with last field of the address part.it also working fine within subnet so that we can display video captured from one cam to multiple destination
** this is the real problem whcih i m facing now is how to make it to work in internet? to mutliple destination? whether i need to create multiple medialocator url??? anybody have any idea? plz help thanking u in advance?
anoop

Is it possible to monitor audio through my mac while capturing from a tape in FCPX

Is it possible to monitor audio through my mac while capturing from a tape in FCPX?

I am sure that as you import a tape you will hear the audio as well as see the video.
Have you got FCP X?
If not, download the free 30 day trial.
http://www.apple.com/finalcutpro/trial/

Looking for video capture devices

when I tried to compile a web cam capture program, I have the following Exception:
Looking for video capture devices
No VFW video detected: JMFSecurityManager: java.lang.UnsatisfiedLinkError: no jmvfw in java.library.path
Please,I need ahelp.

Hi I can recommend v4l4j to capture for video streams with linux. I need a library of functions to quick show video from webcam in JFrames and it did it for me.
try it : http://v4l4j.googlecode.com

Import from VHS Tapes

What is the best way to import video from VHS tape cassettes?

Use a converter box like a Grass Valley ADVC110 I think it is, or DV camera that you can use as a converter.

N95,GPS, Flash in night for video capture

please help me, i have some questions.
1. when i want record a video with N95 flash dont turn on in night, why ?? i cannt turn on flash for video capture in night>
2. how can my nokia N95 i bought is original ???
3. my GPS doesnt work in iran ?? why?? i must download iran maps on it , or???

15-Jul-200705:21 PM
probit wrote:
please help me, i have some questions.
1. when i want record a video with N95 flash dont turn on in night, why ?? i cannt turn on flash for video capture in night>
2. how can my nokia N95 i bought is original ???
3. my GPS doesnt work in iran ?? why?? i must download iran maps on it , or???
1) The N95 currently does NOT offer the facility to use the flash as a light for video capture.
2) I don't understand your question
3) Your GPS should work in Iran, although there may be an issue with the US (to which all GPS satellites belong to) not allowing Iran to use the satellites - not too sure about this bit.
You will need to download Iranian maps (if available) for the N95 - you can find the download page for Nokia Maps here :
http://europe.nokia.com/A4353385
Also if you follow the link below it'll give you more information on how to get your GPS working :
/discussions/board/message?board.id=connectivity&message.id=8921#M8921
Regards,
Edward

Capturing in FCE from VHS Tape/VHS Player - Can it be done??

I capture no problem using a 4-6pin Firewire for DV Tapes; and pulling them in from either a Sony DV or a Cannon GL-2 DV.
Does anyone know of a (somewhat low-cost) VHS Player, that has a digital connection so I can pull in source from old VHS Tapes - or digitize some of these VHS Tapes I own, but can no longer get them on any other media..?
I have searched for USB-VHS Players and they seem expensive, however, I would imagine that a USB connection would be wrong... and anything else I find with better digital connections put the VHS Player/Recorders in the HD category and get muderously expensive. I seriously am just looking to capture maybe 10-12 tapes, and would love to have the capability if the need ever arises again for production work; but don't forsee a ton of it.
I have been contemplating daisy-chaining a VHS Player through my DV Cam(s) to see if that would work - but figured I would check here first, being that somebody may know an easy solution... or has done this before and knows the exact remedy.
Your help is greatly appreciated.Thanks.!
Office; Mac PowerPC G4 Dual 1.42 GHz Tower 2GB/120GB HD Mac OS X (10.3.9) Home; MacPro QuadCore 2.66Ghz 8Gb RAM; iBook G3 700GHz 1GB/80GB HD

I have done this many times, using my DVD recorder which has VHS tape and a DVD recording facility. If you can find a friend with one, it is simple. Put the VHS tape in the VHS side of the machine and a DVD recordable (recordable many times) into the DVD slot. Use the machine's dubbing feature to copy to the DVD. After that, Finalise the DVD to allow it to be read by a computer (or a stand-alone DVD recorder). Use Toast to read the DVD and to create a QT movie of your recording. Then Import the QT movie into FCE.

Correct preset for video captured from VHS tape

Similar Messages

Maybe you are looking for