Correct procedure to unplug E90 from USB?

Are these the correct procedures?
*** Data Transfer Mode for Win XP
Using Windows, click on the little green thingy in the systray, click the appropriate device.
Once Windows says I can unplug the device, I do.
* Why I think I am doing something wrong
The E90 complains about possibly interrupting transmissions and I am having non-stop problems with corruption of my microSD - I have used Windows Disk check and surface scan so I don't think there is a problem with my MicroSD card, although it is 4G, not 2G.
*** PC Suite Mode
I am not sure how to initiate a correct unplug here.
*** As an aside.
The E90 gives an option to ask which connection mechanism to use when plugging in - problem is, it goes ahead and connects with the current setting, regardless of what you say - then changes if you alter the setting - causing unexpected disconnects from the PC perspective.
I have learned to set my preferred connection type in the settings panel PRIOR to plugging it in.

if u connect using the pc suite mode, u can unplug or pull the plug directly out. if u use the data transfer mode, go through the normal process
i just pull the usb cable out always in either of the modes and havent had any problems thus far
Wishing u a great time with your device,
eseriesaddict
Chennai
India.

Similar Messages

MDT 2012 deploy OS from USB external drive failed - need to unplug and plug it once again

We are using MDT 2012 and deploying Windows 7 using media (USB external hard drive). We can successfully deploy Windows 7 32 bit using this method but there is a problem with deploying Windows 7 64bit. This problem appears only on HP EliteBook 840. We can
boot into WinPE 64 bit and can start proper task sequence, all image is applied then after restart, before logon screen appears there is an error saying that cannot find litetouch.vbs script. After clicking ok, I can logon to Windows and there is no usb external
drive recognized. But when I unplug and plug usb drive once again it is recognized by Windows and can be used. I can see that Windows install some drivers just after plug it again
I checked BIOS looking for some USB power options - there is no such settings. And 32 bit deployment works ok. So this is not a case. Looks for me like a problem with proper usb drivers for 64 bit. I download all drivers from HP website (driver pack and
drivers only for USB 3.0). We are using make and model matching in MDT - works ok for all the rest hardware models. Any idea how to troubleshoot it?

Not sure what's going on here. Is this a USB "Flash" drive or a USB "Hard Drive". There *Is* a distinction.
I *thought* that MDT would copy itself to the c:\minint\scripts folder to continue installation.
Next time, when you see this error, Press Shift-F10 to get into a cmd.exe prompt. Can you find litetouch.vbs on any of the drives? Does the USB Drive appear?
IF in fact, the USB Drive is not appearing after the 1st reboot, then you have a problem. Why did the USB 3.0 driver not install. Check the Driver Installation Logs to verify.
Keith Garner - keithga.wordpress.com

What is the correct procedure to connect and collect events from IPS through SDEE

What is the correct procedure to connect and collect events from IPS through SDEE?
We are a 3rd party application, that needs to collect and analyze the IPS events for a client.
Currently the approach we are following is
1) get a SubscriptionId using the URL below
https://IP_Of_IPS/cgi-bin/sdee-server?action=open&events=evIdsAlert&force=yes
This gets us a subscriptionId which is used in step 2
2) Collect events from the url below
https://IP_Of_IPS/cgi-bin/sdee-server?confirm=yes&action=get&subscriptionId=sub-sample&startTime=1362699903575432000
a few more notes here are
- starttime is current time in nanoseconds
the peculiar problem here is that, even though we specify todays date, SDEE returns us the events from mid Feb (today is march 7)
we did try a few combinations, but are out of ideas.
any help or direction would be appreciated

This is more an application issue than an IPS issue.
Have you compared your app against other apps [IME]?

Just updated to Yosemite, computer crashes everytime I unplug my WiMax from USB port

I have a MacBook Pro Retina, and updated from Mavericks OS X to Yosemite OS X.
Ever since the update, my laptop crashes everytime I unplug my WiMax portable internet from USB port.
The error message that appears says: “your computer restarted because of a problem, press any key to continue…”.
After pressing a key, the Apple logo and a loading bar appears, ~30s later, I am brought to login page.
I already tried to "repair disk permissions" in disk utilities, but the issue is not resolved.
Can you please teach me how fix my computer, so that it doesn't crash everytime I unplug my WiMax from USB port?
Thank you very much!

I have the same problem in Yosemite. If I turn off or disconnect my G-Technology Thunderbolt drive, my MacBook Pro freezes/crashes every time. I get a dark screen and message: “Your computer restarted because of a problem…” (and then it restarts automatically).
I always eject the drive first with no issue. It’s just when I power the drive down or physically disconnect the cable that the crash occurs.
Anyone find any solutions yet?

HT201328 i havent received a message from carrier yet, but what is correct procedure to unlock iphone 5....

i havent received message from carrier yet, but what is correct procedure to unlock iphone 5

Read here:
http://support.apple.com/kb/HT5014

Audigy 2 ZS sound from USB headphones but none from speakers

<Audigy 2 ZS sound from USB headphones but none from speakersw Hello everyone. Lately my computer has been acting up a bit (HP xw6200 workstation) and I updated the graphics and sound drivers to fix the issues with crashing. I first tried to update the audio drivers from the Creative support website but when the installation was finished and the computer restarted there was no longer any sound and all of the volume controls stopped working (sliders, buttons, checkboxes, etc. turned gray). I tried a couple more times to uninstall, then reinstall the driver but it still didn't work. Finally I went to the HP support website and downloaded the audio driver from there and installed it. Now the volume controls work again and when I plug in my Logitech USB headset I can hear sound just fine but when they are unplugged and I try to use my desktop speakers there is no sound at all. I played around with the volume controls, made sure the device and output was correct, and plugged the green output cable to the speakers in all of the sockets I could find while playing a song on Windows Media but it still doesn't work. Anybody have an idea of what might be going on and how to fix it's

@? OK another update (sorry I know I'm posting a lot). I downloaded and installed a different driver from the Creative support site and I now finally have sound in my speakers again. BUT the original problem I was having came back. Whenever I play a game (lately it's been Warcraft III) that seems to have more advanced 3D sound (more than, say, a web video on YouTube) the screen will all of a sudden turn some really weird pattern, the sound will stop, and the entire computer freezes; I then have to manually shut down (with the power button), wait a few seconds, then reboot. I thought this was a graphics issue so I downloaded and installed the latest driver for my video card (nVidia Quadro FX) which didn't help. Now I think it might be a sound card issue (or maybe motherboard?) because this problem doesn't happen when I use my USB headphones to play games. Might my sound card be dying or "breaking" somehow?

Correct procedure to update to Lollipop and perform hard reset

Hi Community,
I need to know the correct procedure to update the Sony Xperia Z2 from KitKat to Lollipop.
These are the main questions:
1) Update via OTA or from PC Companion when the firmware is noticed?
2) When the hard reset (system repair) must be done? Before the update or after the update or both?
3) How perform CORRECTLY, STEP BY STEP, the hard reset after Lollipop update?
I and all Z2 users need this fondamental informations to prevent Lollipop bugs or malfunctions!
We wait DETAILED answer from Sony!
Cheers

We are a user support forum not Sony employed - If you want to update then do so via any means you see fit then if you want to make sure it's a clean fresh install then try performing a system repair using PC Companion - This will factory reset your phone and erase all data so best to backup before you begin
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Dv4-2160 bios corrupted, how to repair from usb

I have a dv4-2160us that only powers up briefly, basically flashes, then shuts down. i have read and determined this may be a problem with the bios. i have created a usb uefi w/ HP_TOOLS label and have tried to follow the instructions to prep it for recovery. When i power up the dv4 using the win+b and power, it comes on and tries to access the usb drive but nothing happens. the process seems to repeat endlessly. can someone tell me the correct procedure to prep the usb drive for bios update or repair by usb?

Thank you for your reply. Neither of these solutions applied to the malfunction i am experiencing.
When i attempt to power up the notebook, it flashes power for a second then cuts off. The volume touch control above the keyboard flashes briefly during this short time. I have tried removing pci-e cards, memory, drives, etc to see if that would allow the pc to boot and none helped. The only way to get any kind of resopnse out of this pc is by pressing win+B while pressing the power button. The pc powers on but to only a blank screen. If i have a usb drive inserted, it periodicly check this for something as if its looking for something to boot from.
Now i have read that you can create a bootable usb drive using "HP Unified Extensible Firmware Interface (UEFI) Support Environment" and "HP USB Recovery Flash Disk Utility" basically you get the uefi utility with the "HP_TOOLS" labeled partition. I have also read that it is possible to actually install bios revisions to this usb drive by using a option in some downloaded bios upgrade packages on a working pc so it may then be inserted into a pc with a malfunctioning bios and updated using the win+B feature.
When i create my usb drive, it appears it has a place for this including folders for flash programs and bios files. The latest bios for the dv4-2160 however, when run on a working computer with the "HP_TOOLS" usb drive inserted, does not give me an option to install the bios to the USB drive. Is there a way to put the flash program and bios files on a properly configured & formatted usb for the dv4-2160us?

How to get bootcamp to install from USB on Mid 2010 Macbook Pro in Mavericks

Ok, finally ran into my first problem with Mavericks. It's a doozy. Please if anyone has any advice, let me know.
My bootcamp partition was acting a little buggy. I also wanted to make the partition larger, so I went ahead and erased it, made a larger partition and was getting ready to install windows 7.
Unfortunately, little to my knowledge, bootcamp assistant is programmed to not allow installation of Windows via USB if your computer had an optical drive in it's factory delivered form.
I have removed my optical drive in favor of a second hard drive and encased my original superdrive into an External USB hub.
There apparently used to be a solution involving editing the plist.info text document to allow USB installation. However, as of MAVERICKS, this document is now locked and unable to be edited.
I was running windows 7 fine until I scrapped it, and now I have no way to re-install windows short of going through a laborious process of re-installing my optical drive into my laptop, installing, and then re-installing my hard drive back in. The only reason is due to a software bias for my series of laptop because it "used to have" an optical drive.
Does anyone know of any way that I can bypass this issue to get Windows Re-installed to a bootcamp partition on a mid-2010 macbook pro without using the optical drive?
Thanks in advance!

Remove the Boot Camp partition only with Boot Camp Assistant, not with Disk Utility.
Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

Grey Screen, won't boot from usb. Only have a PC to create a boot USB. How can I reinstall OSX with a .dmg file?

I recently recieved a macbook that I was told was broken. She didn't know what was wrong with it, but she told me I could keep it if I wanted to get it working again. Its http://support.apple.com/kb/sp579 this model. I got the laptop to power on, but the apple logo and the spinning wheel under it kept spinning forever. So with me and my "Amazing" knowledge of Macs, I thought it would be best to reformat the drive on my PC via sata cable to FAT32 (which I was told is a format that mac devices can read/write on) and install OSX from usb. So I have a .dmg file and used TransMac to format the usb and make the usb drive bootable with the .dmg.
I formatted the drive to FAT32 and plugged it into my macbook and I get a folder and a question mark blinking on the screen. After looking at some forums online, I found that the error occurs when you don't have the correct filesystem to boot or something along those lines. So I try rebooting the computer while holding C, to boot from an external device (such as USB). Nothing. Again the folder and question mark blink on the screen. I look at some other boot option keys and try all of them. Shift for recovery mode, D for apple hardware test, Control, option, P, and R for resetting NVRAM and PRAM. Everything! The only things that differ slightly are when I press Option for startup manager, N for NetBoot and Option+N for internet default boot image. When I press N and Option+N, I get a blinking globe for about 5-10 seconds and then the folder and ? blink again. When I hold Option for the startup manager, I get a white screen and my curser, which I can move around the screen, but there is nothing to click on, its just white.
Currently I have a USB flash drive plugged into the macbook with a .dmg OSX installer on it via TransMac and for some reason, my macbook doesn't want to try to load it. Either I have the wrong file format for the installer, or my macbook is having problems. I read that the hard drive may be the problem, except I can use it on my PC so I know that it works fine.
If anyone has any information about how to fix this, or any ideas. Please let me know! I would very much like to get this macbook going again.

The correct format for Mac OS X is not FAT-32.
As the computer shipped with an install-restore disc DVD set that could be used to start the computer as an emergency disc and use the Utilities on the Installer, without running the Installer itself, to format, attempt repair, and perform a few different system installs or reinstalls, this is where the correct format would come from.
Was there documentation to confirm the build year and model information, such as to refer you to the product page link you posted above?
If accurate, that MacBook shipped with this custom grey
install-restore DVD version of Snow Leopard:
Original OS
Mac OS X 10.6.1 (10A2047)
Maximum OS
Latest release of OS X
AirDrop
Supported
Hardware Test
AHT 3A181
And to be able to restore the basic OS X to that level, official replacement discs for that computer should be ordered from AppleCare; to facilitiate obtaining correct ones, you should find the product serial number. There likely would be a fee involved. The replacement disc set may have a different number than the one in the information box above, but would match the hardware series by Apple standards. And a replacement disc may not have the original extra applications that shipped with the computer when new. Those original discs are part of the retail computer, an essential part number, like the power adapter, and should be included with the computer even after an OS X upgrade, since they allow basic access without using the internet.
The remainder of the Snow Leopard 10.6(.8) would be a download Software Update Combo v 10.6.8, either direct from Apple servers or through the computer's running Software Update. Once the computer is up to date in Snow Leopard, 10.6.8, then one could visit the Mac App Store, App Store, and iTunes Store; from the Mac App Store, and you could check/get the latest upgrade to Mac OS X, 10.9.2. An Apple ID is required to access.
The computer may not support Mavericks 10.9.2, or may be able to, but could use an upgrade of RAM capacity.
If your model and build year series info is correct:
Maximum Memory
8.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 204-pin PC3-8500 (1066MHz) DDR3 SO-DIMM
For more information see the database download http://mactracker.ca
and also compare specs with macbook models at everymac.com.
The newer OS X systems that can use a Recovery HD partition on the hard disk drive, can start from there to repair their hard disk drive, and reformat the section where the Mac OS X runs, and reinstall that. Since there is no likelihood of that still being on the drive once it was FAT-32 reformatted, it will not be present to assist in attempts to reformat the drive; if the computer had been upgraded past Snow Leopard 10.6, to a later system that would have used the recovery partition, or the later internet recovery system. That goes to Apple Servers to use OS X Utilities and reinstall the system, helpful for computers without optical drives or system media. Your MacBook with 10.6.8 installed, then had to access the Mac App Store, to get 10.7.5, 10.8.5, or 10.9.x
Identify your Mac lookup by model number or serial number:
https://www.powerbookmedic.com/identify-mac-serial.php
Anyway, the hardware in the computer may need some inspection, troubleshooting, and maybe repair; but the original DVD install-restore disc has an Apple Hardware Test on it, for that series build model macbook. That could help in troubleshooting some aspects of the computer. Could be the hard disk drive failed; or if someone tried to upgrade the RAM, the system may not have worked correctly. Hard to say how it was messed up, at this stage. There are several possible causes.
Hopefully you can get the correct disc set from AppleCare.
You can call Support number, or use Contact Support page.
Good luck & happy computing!

How can I move my media files from USB-HD to NAS without having to copy the media files to iTunes Media folder?

I have iTunes on a Mac with the iTunes Media folder stored locally and the music on an external USB-HD. The music files are Not copied to iTunes Media folder when added to the library.
Now I want to move my files from USB-HD to a NAS without losing any information or settings. I want to do the similar to my iPhoto library. I do not want to consolidate my files to iTunes Media folder. The articles I’ve read only discuss how to do if the files are copied to iTunes Media folder when added to the library. Any tips or trix?

I have iTunes on a Mac with the iTunes Media folder stored locally and the music on an external USB-HD. The music files are Not copied to iTunes Media folder when added to the library.
How are you achieving the above? What are your copy setting in preferences? If you are manually overriding the copy-to by holding down the option key while adding media then that won't apply when you import a playlist (as in importing the .xml). When you import a playlist like that you are essentially adding the files to the library again and it will obey the preferences setting since you can't option add them that way.
Correct on the .itl. Only iTunes itself can edit that file.
I think you need to review your basic wants/needs in doing all this. If your reason for not wanting to use the Media Folder settiing is because you do not want it to go on the internal drive, but you don't actually mind if it organizes it as long as it is on the NAS, change the Media Folder preferences setting to the NAS and let it consolidate to there. If you want to move the stuff but keep it organized in your own folder structure you may need to do it as I suggested initially. Once it is on the NAS and iTunes recognize the file locations you can do what you can only do if you manually manage music which is move it around in Finder afterward once it is on the drive and recognized to tweak location to your final wishes.

How Can I boot from USB - Portege A200

Hi,
I've got an Portege A200 which is only a couple of years old but the hard drive no longer works. Initially I thought this was due to corrupting the boot record on the drive but after attempting to replace the hard drive (with two different drives) it is showing an IDE #0 error upon boot. I have therefore come to the conclusion the IDE controller chip has died.
In order to get the latop working I burned a cd with the ubunto ISO. This boots ok but due to only have 512Mb RAM the system is somewhat limited and anything installed is lost everytime I reboot.
I have now bought a 2Gb flash drive and installed ubuntu onto this. My next problem is that there appears to be no boot from USB HDD or USB Memory Stick option in the bios.
The possible options that I can think of are:
1) Upgade the bios so it supports boot from memory stick (although no HDD so not sure how I could reflash the BIOS or if there is even a BIOS upgrade that would support this functionality)
2) Create a cd which starts the boot process then tells the system to continue booting from the usb drive (Is this possible and does anyone know where I might be able to obtain such software)
3) Boot from CD but use the USB to retain any information saved / any installs etc (I guess similar to option 2 except the cd would manage the whole OS and the USB would just hold 'additional' information)
If there are any other options that anyone can think of I am happy to give them a go. Seems a shame to have to chuck a laptop that isn't particularly old because the IDE controller chip has failed on the mobo.
I apppriciate any help anyone can offer.
Many thanks,
Mark

Hi
First of all I have to say that its not possible to boot from the external USB device like the USB stick, USB CD/DVD drive or USB HDD.
Its possible only to boot from the external USB FDD (diskette) drive
However, not the booting possibilities are clear but I think you have misunderstood the IDE#0 error message. In m opinion the IDE controller is not faulty but only the new HDD is not compatible and not recognized by BIOS.
There are different reasons for this issue
Mostly this error message appears if the HDD master/slave/c-sel settings are not correct.
Usually such settings dont need to be changed or switched on 2.5 HDDs but some HDDs support an jumper which must be set in the right position. But I dont if your HDD supports this
Furthermore the not compatible HDD size could be the reason for such error messages!
So finally I would recommend contacting the ASP in your country to get a new, compatible HDD and to check if the same error persists.
Good luck

Can we call a procedure defined in AM from a procedure in AM itself?

Dear Members,
I just want to know is it a oracle standard way to call a procedure defined in AM from another procedure defined in the same AM. For example
AM Code:_
public void proc1()
System.out.println("IAM IN PROCEDURE-1");
public void proc2()
proc1;
Kindly please let me know whether the above coding style is as per the standards or not.
Many thanks in advance.
Best Regards,
Arun Reddy D.

Arun,
As Ravi mentioned this way of calling the method is correct.
proc1() could be reusable thats why you are calling again.
Some times few methods(procedure) is common use across the module.
In that case you can have the method in a commonAM and you extend the commonAM in all your AMs
that will help you to call in all the AM having a central place to call.
Thanks,
With regards,
Kali.
OSSI.

TS3276 Mail Services - Mavericks this is new OS to me.I am having trouble with attachments to my e-mails. The attachments were not large (single sheet typed). Getting message file to large. Never had this before. Please advise correct procedure to att

Some of the attachments were only a couple of typed pages. I saved them as pdf format so receiver could read. The pdf file would not attach. Program gave message file to large for attachment to e-mail. Perhaps I am not doing correct procedure to attaching a file to an e-mail. I tried typing the document and saving it in pdf format to the desktop. Opened the e-mail on Safarii - typed a quick message and then tried to drop /drag attachment from desktop to e-mail. Up pops the stupid message. Would someone give me the step by step procedure for adding attachments to an e-mail being sent via Safari. Also is there a way to send large files as an attachment. I was able to do this when I was using mountain lion. Help please.

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

What is the correct procedure for upgrading to aperture 3.4

I am working in South Sudan and am shortly going to be in a place where I can download all the updates. The last time I did an update was around 2 weeks ago.
I presume that there will be updates for Mountain Lion, iPhoto and Aperture, plus a whole pile of iOS updates. From the support questions I see that there is a number of people having problems.
I presume that the first thing to do will be to rebuild the library of aperture.
What is the correct procedure after that?

If I do an upgrade through AppStore, and find it does not work, do I uninstall first by removing to trash? What do you mean by revert to an earlier version, and which previous version of Aperture should I use.
Neville,
So you did buy Aperture from the AppStore?
Then move the Aperture application to the Trash, but do not empty it, just in case
Sign into the AppStore and reinstall. In this case you do not need to revert to an earlier version. If the AppStore installer does not find an Aperture in your Applications folder, it will have to make a full install, and no incompatible frameworks should remain, as is the problem with the partial upgrades right now.
Yes, I have a bootable clone,
And have you checked, if you really can boot from your clone? Just being very cautious.
Do you use facebook? Some posters are having problems, even after reinstalling, if the want to publish to Facebook. Post back, if you encounter that problem.
Good Luck
Léonie

Correct procedure to unplug E90 from USB?

Similar Messages

Maybe you are looking for