Correct rom for Geforce 7800 GTX for Mac G5?

I just got my hands on a Nvidia Geforce 7800 GTX 512 and would like to flash it to work on my Quad G5. I know it is floaing around out there somewhere in our Ether-Space. Would some kind soul please share? Thanks

I recently acquired a Late 2005 PowerMac G5 2.3 Dual Core. It came with the sluggish GeForce 6600. I too am interested in flashing a 7800 GTX with a ROM for Mac.
Will any brand 7800 GTX qualify? I understand there may be a problem with cards having different ROM sizes. Could anyone list specific brand cards they would recommend for this purpose? I know I shouldn't expect to find any new ones. I will look in all the usual places.
Also, is it important to get the GTX and not the GT?
Thanks.

Similar Messages

  • GeForce 7800 GTX... the best card for a PCIe G5 Power Mac?

    I have started out on the rocky road to upgrade the graphics card on my Power Mac G5 Quad 2.5GHz running Mac OS X 10.5.8. The standard card, a GeForce 6600, does not do justice to this wonderful computer, and struggles with any serious video work.
    The first step is easy – deciding on the best card. A little Googling shows that the GeForce 7800 GTX wins hands down over the competition.
    The next needs patience – these cards appear from time to time on eBay; I will need a 512 MB PCI-e version (not 256 MB) as I am running 10.5.
    I've waited a month or two, put in a winning bid and the card has arrived. Now all I need is the code to flash the ROM to make it work in myG5. Not so fast! I'll need a 128kb ROM chip! The idea of using a soldering iron terrifies me, so I'll have to find someone, who does this sort of thing for a living, to remove the 64kb ROM from my 7800 GTX and solder on a 128kb ROM.
    But what's is the right spec/manufacturer/supplier for the 128 kb ROM?
    If I am lucky my friend with the soldering iron may know. If not, I'm stuck. I've not been able to find this information anywhere on the Internet.
    Now all I need is the right code for the ROM. It seems that there are two versions that people have used: one, which seems quite common, is lightly edited Quadro FX 4500 ROM code which does not use the full power of the 7800 GTX, which after flashing reports itself as a FX 4500; the other, which seems to be as rare as gold dust, has been fine-tuned to use the 7800 GTXs full potential. Cards flashed with this version report correctly as 7800 GTX. I really want this optimised code, but neither version is available from any of the usual places.
    Can anyone please help?

    I've waited a month or two, put in a winning bid and the card has arrived. Now all I need is the code to flash the ROM to make it work in my G5. Not so fast! I'll need a 128kb ROM chip! The idea of using a soldering iron terrifies me, so I'll have to find someone, who does this sort of thing for a living, to remove the 64kb ROM from my 7800 GTX and solder on a 128kb ROM.
    Many thanks to japamac, who kindly sent me an e-mail which put me on the right track re finding the ROM code, editing it and flashing.
    I also now know that I no longer have to worry about soldering ROM chips. Yippee! The 7800 GTX code has been 'shrunk' to fit on a 64kb ROM.

  • Nvidia geforce 7800 GTX 256/512 ROM for G5

    Hello,
    Im looking for a few ROM files for the nvidia Geforce 7800 GTX 512 and 256 Models for use in a pci-e G5, but I cant seem to find them anywhere else. could someone please send a copy to:
    [email protected]
    that would be very much appreciated

    Might try this...
    http://forums.macrumors.com/showthread.php?t=1552556
    No idea if the great japamac will respond, but..
    https://discussions.apple.com/people/japamac

  • Geforce 7800 gtx card in my mac ?

    Hi,
    to troubleshoot a display problem with my MacG5, ( http://discussions.apple.com/thread.jspa?threadID=1121100&tstart=0 ) I would like to install a second graphic card in it. I have a PC Nvidia Geforce 7800 gtx card. Can I install this without any problem in my Mac ?
    Do I have to modify anything (flash the card ROM) to make this work ?
    Any info on this would be much appreciated.
    Thanks.
    Guillaume.

    No...the card won't work. Unless you can flash it to work in a Mac. That's no easy task.

  • PowerMac G5 Quad GeForce 7800 GTX 512mb or Quadro 4500 FX

    Hey, best regards for all users. I have a question about changing graphics card. I'll be gratefull for all help.
    I have PowerMac G5 Quad Late 2005 - M9592LL/A and OS X Leopard 10.5.8.
    My card is GeForce 7800GTX 512MB and Quadro fx4500 model p348.
    I'm looking for ROM for this cards for Mac G5. I want to change 6600 for 7800GTX 512MB or Quadro. Cards tested on PC are working.
    Anyone can help ? I can't find any info about ROM for this cards.
    Thanks all !

    Both the X1900 (R580) and the 7800 GTX (G70) are capable GPUs on advanced cards, both targeting and supporting Shader Model 3.0. 3D was a focal point in development for either card.
    Approaches for shader implementation are very different between the two cards.
    Arguements for either abound, but, 3D performance will be a defining factor to show shader prowess.
    Architecturally, the cards are very different, but, in the end, memory bandwidth, an important performance feature, is highest with the 7800 GTX; 54.4 GB/s vs. 38 GB/s for the Mac Edition Radeon.
    The next X19xx card, the X1950, almost doubled memory bandwidth over the X1900.
    I know guys that use flashed X1950 (512 MB) cards really like them.
    Support of DirectX 9 and Shader Model 3.0 make either card more than is necessary for OS X Core Image and OpenGL requirements.
    You bring up a very important point regarding application specific performance.
    Games are one form of benchmark, but not always indicative of real world performance.
    In Photoshop, CS4, the 7800 GTX is a fully supported card, whereas the X1900 (256 MB) card is not supported. The 512 MB version of the X1900 is supported, but doesn't help owners of the Mac Edition.
    There are pros and cons with either card, eventually driver and OpenGL support being the defining point.
    Early driver issues with the X1900 in OS X and a relatively short retail availability likely affect the lack of empirical data on the cards performance.
    The following, though comparing a X1900XT (not the little brother X1900GT which is the G5 version) with a Geforce 7800 GTX on platforms other than Mac, the comparisons do show pro oriented application performance.
    Though not necessarily applicable to OS X and PPC Macs, I thought it to be an interesting set of tests.
    http://ixbtlabs.com/articles2/cpu/nvidia-vs-ati-on-amd-and-intel.html
    Either card is great, either is way better than the 6600, and, as you point out, availability is an important factor.

  • Geforce 7800 gtx power plug?

    im getting a geforce 7800 gtx and it comes with i guess its a power cord where do i plug it into my late 05 dual core 2.0 g5? i know the card goes into the pcie slot but what about the little cord so it gets it power?
    thanks
    roger

    Hi-
    Welcome to Discussions!
    In the Late 2005 models, there is a 6 pin power connection for graphics card power. The connector is located along the top edge of the logic board, above the RAM slots, Shown Here.
    The cable needed is like these:
    http://shop.ebay.com/i.html?kw=G5&_kw=card&_kw=power&kw=cable

  • GeForce 7800 GTX 512MB

    PC users can now get a souped up GeForce 7800 GTX with 512MB of DDR3:
    http://www.newegg.com/Product/Product.asp?Item=N82E16814130259
    I wish Apple would offer that same card with Apple firmware for the Dual-Core G5s.

    Amen to that. Cheers on your great site, too!
    --from an islander "still" in the islands

  • 2 MSI Geforce 7800 GTX Duds?!?!

    I just bought two MSI Geforce 7800 GTX's and both seem to be faulty.
    I've tried them in single mode, SLI mode, and on multiple computers
    Both computers are MSI K8N Neo4 Platinum / SLI
    2 GB Corsair RAM at 3 3 3 8 1T
    One is an AMD Athlon 60 3000+
    The other is AMD Athlong 64 FX-55
    Both cards freeze on starting up windows right before the Windows XP PRofessional Loading screen. This occurs in SLI and in non-SLI mode running one card, as well as running on two diferent motherboards
    Not only does it freeze when starting up windows but when trying to do a windows install as well freezes on the "starting up windows" portion when i tried to reformat
    I have tried updating the BIOS for the MSI boards, it did nothing.
    This was an upgrade from two MSI 6800 GT's
    Should I return the pieces to the retailer?
    Thanks =/
    -Geilt

    Powersupply is 550 watt Antec Truepower II (TPII-550)
    # 2 low noise fans
    # Dual 12V outputs, for stability and safety
    # True Spec noise level of 21.3 dBA measured at an independent lab using ISO 7779 standard
    # EPS12V compliant/ATX12V 2.01 compatible. 24-pin main power connector with detachable 4-pin section for universal motherboard compatibility
    # 4 Serial ATA connectors
    # PCI Express graphic card power connectors
    # Dedicated output for more stability and less ripple noise
    # Feedback circuits for tighter load regulation (±3%) to maintain accurate voltage to all components
    # Industrial-grade protection circuitry prevents damage resulting from short circuits, power overloads, excessive current, excessive voltage , excessive temperatures
    # Fan Only power connectors allow True Power to control case fan speeds, reducing total system noise
    # MTBF: 80,000 hours
    # Safety approval: CB, DEMKO, FCC Class B, FIMKO, EMKO, UL, VDE, TUV
    # Gold plated connectors for superior conductivity
    # Important Note: The TruePower 2.0 Fan Only connectors are designed to power standard fans only. Attaching thermally-controlled fans to these connectors will likely result in unpredictable and undesired behavior. Thermally-controlled fans should only be connected to the standard 4-pin Peripheral Power Connectors. Please do not connect more than three fans to the Fan Only connectors.
    FEATURES
    Maximum Power    550 Watts
    Switches    ATX Logic on-off
    additional power rocker switch
    115/230 Volt selector switch
    Special Connectors    ATX12V 4pin/8pin
    3-pin Fan Sensor
    Fan Only
    SATA
    Transient Response    +5V,+12V and 3.3V outputs return to within 3% in less than 1ms for 20% load change.
    P. G. Signal    100-500ms
    Over Voltage Protection
    recycle AC to reset    +5V trip point < +6.5V
    +3.3V trip point < +4.1V
    +12V trip point < +14.4V
    Leakage Current    < 3.5mA @ 115VAC
    DIMENSIONS
    Unit Size    5.9"(L) x 5.5"(W) x 3.4"(H)
    15cm(L) x 14 cm(W) x 8.6 cm(H)
    Net Weight    5lbs.; 2.3kg
    INPUT
    Input Voltage    115 VAC / 230VAC
    Input Frequency Range    47Hz to 63Hz
    Input Surge Current    < 60A @ 115VAC
    Input Current    12.0A for 115VAC
    6 .0A for 230VAC
    Hold-up Time    > 17ms at Full Load
    Efficiency    > 70%
    EMI/RFI    FCC Class B
    CISPR22 Class
    OUTPUT
         +3.3V    +5V    +12V1    +12V2    +5V SB    -12V
    Max. Load    32.0A*    40A*    19A*    19A    2.0A    1.0A
    Min. Load    0.5A    0.5A    0.4A    0.4A    0A    0A
    Load Reg.    ±3%    ±3%    ±3%    ±3%    ±5%    ±5%
    Ripple V(p-p)    50mV    50mV    120mV    120mV    50mV    120mV
    * +5V, +3.3V, +12V1, 12V2 maximum output 530 Watts max.
    ENVIRONMENTAL
    Operating Temp.    0 to 50ºC
    Operating Alt.    Sea Level 10,000 ft.
    Non-Operating Vibration    Operating: 10-300 Hz, 0.5G, 3 axes, 1 hr. ea. axis
    Non-operating: 10-300 Hz, 2.0G, 3 axes, 1 hr. ea. axis
    MTBF    80,000 hrs. @ 25ºC
    Approvals    UL, CUL, FCC Class B, CB, TÜV
     

  • K8N Neo3 with a GeForce 7800 GTX?

    Hello, I got a AMD64 3200 (socket 754) processor with a K8N Neo Platinum motherboard.
    I want to upgrade my videocard and I am thinking of a GeForce 7800 GTX. Because of the futurure I want a pci-e card, so I am thinking of changing my motherboard to a  K8N Neo3 motherboard. I searched everywhere online (including this forum and the msi site) but I can't find if this motherboard is compatible with a GeForce 7800 GTX. Can anyone provide me with the answer? Thanks.

    Quote from: Luke51087123 on 25-August-05, 08:51:29
    neo 3?? thought there was only 2 and 4.  Im prob wrong but the nforce 4 chipset is the only one for pciE
    I think you are right about the nforce 4, but the K8N Neo3 got the nforce 4. Here is the link:
    K8N Neo3

  • Geforce 7800 GTX won't fit in MSI K8N SLI !

    Hey we all know the problem with MSI K8N SLI and 2 Geforces 7800 GTX:
    http://www.theinquirer.net/?article=24239
    What revision of MSI K8N SLI will fix this problem ? ( i need this info when i will go to store)
    and can you tell me is this problem egzist on Microstar K8N SLI Diamond nForce4 SLI mobo ?

    Quote from: aduh on 03-July-05, 00:58:22
    sorry man i'm lazy sluggard, my women tells me this everyday ...
    LOL, well I have this MOBO and due to the "issue" I will be going to a single card it looks like...but to tell the truth, I never saw that much improvement with dual 6800ultras. I am thinking one new 7800 will be more then enough. Only time will tell

  • MSI Geforce 7800 GTX with MSI Nvidia GeForce 7800GT in SLI?

    Hi. I bought the MSI Nvidia GeForce 7800GT a few months ago with the intention of buying a second to run in SLI. Now i can't seem to find anywhere that sells it at a decent price. Originally i bought it from www.ebuyer.co.uk but they have discontinued it.
    Could i buy a MSI Geforce 7800 GTX and run it in SLI? They should have the same gpu and the specs aren't that different. 

    Quote from: BG84 on 12-August-06, 23:42:56
    what brand, where are you, how much?
    MSI Nvidia GeForce 7800GT 256mb PCI-Express Dual DVI + TV Out
    NX7800GT-VT2D256E
    Not far from Birmingham
    Price, really don't know. whats your best offer? 

  • Run nVidia GeForce 7800 GT on Mac G5 1.8 DP AGP

    *HI all* anyone knows if it´s posible to run a nVidia GeForce 7800 GT on a MAC G5 1.8 DP. Now the machine runs a GeForce FX 5200:
    Chipset: GeForce FX 5200
    Tipo: Pantalla
    Bus: AGP
    Ranura: SLOT-1
    VRAM (total): 64 MB
    Can i upgrade to a nVidia GeForce 7800 GT
    Quick Specs
    Model
    nVidia GeForce 7800 GT
    Slot Compatibility
    AGP 4x/8x
    ROM (Firmware) Revision
    v2152 (Newest)
    VRAM
    256MB 256-bit GDDR3
    Memory Clock
    700MHz (1,400MHz GDDR3)
    GPU Clock
    450MHz
    Hardware Compatibility
    Any 4x AGP G4 (Digital Audio, Quicksilver, Mirrored Drive Door, FireWire 800) or any G5 with an AGP slot
    OS Compatibility
    OS 9.2.2 (No 3D Acceleration), OS X Tiger 10.4.6 - 10.5 Leopard
    Connectors
    VGA, DVI-I (S-Video functionality is not available)
    Display Modes
    VGA, DVI, VGA+DVI, VGA+VGA (w/included adapter), Extended Desktop, Mirrored Display
    Core Image Support
    Yes
    Quartz Extreme Support
    Yes
    Maximum Analog (CRT) Resolution
    2048 x 1536 @ 85hz
    Maximum DVI (LCD) Resolution
    2560 x 1600 @ 60hz (up to 30 " Apple Cinema HD Display)
    Condition
    Brand New
    Auction Includes
    (1) Video Card, (1) DVI-VGA Adapter, (1) 12v Power Splitter
    *THANKS !!!*

    According to your G5 specification the ATI Radeon 9800 XT with 256MB of DDR SDRAM will work.
    +(Notice that there are few models of 9800 i.e.: 9800 64MB, 9800 128MB, 9800 Pro Mac Edition, and some of them are for the older computers)+
    But the fastest card for your computer is Nvidia 6800 Ultra DDL or ATI X800XT.
    The ATI you can find here:
    http://eshop.macsales.com/item/ATI%20Technologies/100435338OB/
    6800, usually is much more expensive and not easy to find.
    Marek.

  • Ways to flash my 7800 GTX 512mb with what available roms ?

    Hello fellow PPC users,
    I am new on this forum, and hope I ask my quastions the right way
    I got me a 7800 GTX 512mb (PC card) for my PowerMac G5 Quad running Leopard.
    I read a lot of discussions about this but I never came across of a topic with instructions about how to flash cards directly with a PowerMac. I have a tool that's called nvflash 1.1 on my mac and there are options like dump rom en flash rom etc....
    Is this possible to use this tool to get it done ? And can anyone provide me with a working rom running the 7800 GTX 512mb on Leopard.
    Thanks in advance for your inputs.
    Greetings from Belgium

    Ok I will have to do that this evening because I am on my work now and my email program is not configurated.
    I already had your website in my favorites but didn't know it was yours
    Thx for sharing your experience with the PPC community

  • I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would ve

    I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would very much like to download a Mac version, so please send my correct web link. By the way my s. number for Lightroom 5 up is [removed], and I also have s.number for 4 up and 3 full.

    The latest non-CC version of LR 5 is 5.7.1 and download links are available on the Adobe Updates page:
    http://www.adobe.com/downloads/updates/
    Both Mac and Win links are there.
    If you are asking for a LR 5 CC link, which wouldn't require a serial number, please be more clear about that.

Maybe you are looking for

  • Unable to close the cursors in the database

    While executing a stored program unit(containing three cursors and sub programs or functions containing another two cursors) through forms the client running the form stops responding. While checking the database the open_cursor view reports that the

  • I tried MSI. K9A2 Platinum Support issues.

    Do not buy MSI.... Buyer beware. I have the MSI K9A2 Platinum motherboard. Now the board runs fine. However I find it very hard to take this company seriously anymore. 6 months ago I tried Flashing the Bios for a CPU upgrade I wanted. MSI's website b

  • SPNEGO Login module Stack issue: Could not validate SPNEGO token

    Hello to all, We are deploying a SAP Netweavear 7.3 Enterprise Portal with SPNego login module activated. We are performing some tests (performances and concurrent accesses). During the tests we have found several times the folloiwing Issue linked to

  • SAP Business One V9 PL09 HF01 is slow after upgrading from 8.8 pl12

    Hi Experts, Recently we upgraded V9 Pl09 HF01 for a customer from V8.8 PL12, initally the application was working fine but few days before customer informed that SAP b1 is running very slow after upgrade. we are not sure this happen moreover we check

  • Where do I get Server 10.8 App

    I had to blow my Mini away and do a clean install. I followed the directions but it didn't install Server, which came with the Mini. Since it didn't come with Disks (or a disk drive) all of the forums say download it from the App Store. The App Store