Correct Setting for changing anamorphic 16:9 to 4:3 in motion tab...

Hi there,
I'm new to FCP.
I'm editing a mainly 4:3 sequence, with a couple source clips in Anamorphic 16:9.
By searching the forums I realise I can change the aspect ratio of these source clips in the motion tab.
However, what is the right number on the Aspect ratio slider to correctly change 16:9 ana to 4:3 (letterboxed)?
Cheers.

Welcome!
However, what is the right number on the Aspect ratio slider to correctly change 16:9 ana to 4:3 (letterboxed)?
If I understand correctly, you want to letterbox your anamorphic 16:9 in a 4:3 sequence. Under the Motion tab, you should change the Distort setting to either +33 or -33, I can't remember off hand, but you'll know which one it is when you try.
tim

Similar Messages

  • Correct setting for exchange rates differences

    Hey SAP B1 experts,
    I have a problem with automatic generated exchange rates differences in B1.
    Situation:
    - I inserted all correct general ledgers in the g/l account determinations.
    - The seeting in the item masterdata for "set g/l accounts by" is switched to warehouses.
    - In the accounting setting in warehouses I inserted the  p&l general ledger for exchange rates differences.
    - I create a case which includes a exchnage rate difference.
    - For the automatic generated entry the system use the general ledger which is inserted in the setting for "variance account" from the warehouse settings.
    Is there any other general setting which is response for the using of the general ledgers for exchange rate differences?
    Help!!
    Regards
    Thomas Bartels

    Hey Shanker,
    thank you for your realy quick answer.
    In administration -> setup -> inventory -> warehouses I inserted  the correct p&l account for the exchange rate differences in the seeting field "exchange rate differences", but the system don't use this setting. In my test case the system use the account from "variance account".
    My questions are on the one hand why and on the other hand is there an other setting for using the correct account setting.
    Regards
    Thomas

  • What is the correct setting for pictures to be used on T-shirts?

    Hi everyone
    Im trying to use some pics of mine, to be used on t-shirts, ive been trying to find the setting to correctly set it, so i can use em on cafepress.com to create a custom made t-shirt, the ones i have are either appearing too small on them or incorrect size etc, I have Adobe Photoshop CS5 downloaded, but i have no earthly clue on how to correctly edit the settings for em. While i know whats i know, i would really love it, if someone could please provide some help on how to do this, becuase i would really love to make a couple of t-shirts with my pics on them.
    Thanks for all incoming help really ^_^
    james

    JamesW2010 wrote:
    I use pics that i take within World of Warcraft, so i generally just take my own, i dont use the bad stuff
    Well those screen shots are never going to look very good on a T-shirt print. You could upsize them in Photoshop but they will look rubbish.
    Maybe you could get something better here:  http://www.worldofwarcraft.com/downloads/wallpapers.html

  • Help with correct setting for Cannon Power shot SX20 IS Sport setting. Blurred

    Looking for advise on camera setting for action shots. All the photo's on "Sport " setting are blurred. "Auto" and I miss the action. I thought this camera was suitable for taking some decent shots of my son on the lacrosse field. Look forward to hearing back from someone.
    Thanks~

    SEE
    http://forums.usa.canon.com/t5/EOS/The-50D-has-a-sports-mode-What-is-the-same-mode-on-the-7D/m-p/152...
    "A skill is developed through constant practice with a passion to improve, not bought."

  • Setting for changing resolution of screen capture??

    I have a retina display iPad, but screen grabs come out really low res (44k). Is there a setting somewhere to fix this? I need to print screen grabs for an instruction manual and they look horrible.

    I have a retina display iPad, but screen grabs come out really low res (44k). Is there a setting somewhere to fix this? I need to print screen grabs for an instruction manual and they look horrible.

  • Proxy.cfg - Correct setting for ResolveProxyIPAddress

    According to TID 3988333 the description of this parameter is "Default behaviour is to send an SSL authentication redirect to a host name instead of a IP address. 0 to disable the same. Requires PXY023 or later."
    Also, the default setting in Proxy.nlm is 1. However, in Craig's Proxy.cfg he has it set to 0. I would think you would want this to be set to 1, no?
    Dan

    OK, I had no idea that that is what this parameter pertained to. Now I see what you are talking about with the BorderManager SSL login as an alternative to Client Trust. We don't use that so that is why I didn't understand.
    To me this again proves that we need more documentation on what these parameters are and why you would use them. I would agree with you after hearing more background that it should be set to 0.
    FYI, the default for 3.9 SP1 proxy is 1! I wonder why Gonzalo thinks this is preferred?
    Dan
    Originally Posted by Craig Johnson
    In article <[email protected]>, Dchunt wrote:
    > Also, the default setting in Proxy.nlm is 1. However, in Craig's
    > Proxy.cfg he has it set to 0. I would think you would want this to be
    > set to 1, no?
    >
    If that's what I think it is, no. I think that has to do with how the
    SSL login page shows up on the browser. Default would have it show up
    with the server name as a URL. Unfortunately, that also means you need
    a DNS entry for the server name. The IP address has always worked,
    which is why I set that to 0. (It may be that the problems I've seen
    with SSL login failing with server name are related to incorrect host
    file entries, but I think it was more widespread than that).
    I definitely want the ssl logins redirected to IP address by default. I
    might go to a URL if I had purchased a 3rd party certificate,
    particularly if using authentication with reverse proxy. But I would be
    ironing out DNS issues as well.
    Craig Johnson
    Novell Support Connection SysOp
    *** For a current patch list, tips, handy files and books on
    BorderManager, go to Craig Johnson Consulting - BorderManager, NetWare, and More ***

  • What is the correct setting for 'HTTP Proxy'?

    On my iPhone 5, while on my home network should HTTP Proxy be set to off, manual, or auto? thanks.

    Thanks, i saw so much talk about it in other threads but nothing about what it should be. My iPhone connects everywhere fine.

  • Best setting for 3D content for Flash

    Hello all. I am a Premiere noob that works in Cinema 4D.  I am exporting C4D  animations as QuickTime "animation" files. (.mov)  These videos are highly  detailed pixel-precise renders. I want to bring them into Premier with this  level of pixel precision, yet I cant seem to find the correct setting to ensure  they import and play back "ice cold." They tend to look slightly blurry in the  preview. The renders are for a specific flash size and are set to 874x480.
    Can someone help me with the correct setting for the movie? Please... The  content is so beautiful, I don't want to sacrifice any quality. I have the  latest version of PP. Thank you for any help you can give.

    Thanks for the help sir.  This is actually for a huge project. I'll post the  link here in a week or so.  Be sure to check it out.  We're all good now.  Ice  cold.  - No blurriness.  Its too bad I was able to do this years ago without any  issue.  Video codec's and technology sure have changed drastically in the past  few years.  There's a real learning curve for those who are not daily users.
    -B
    A side note I learned in this process: Cinema 4D users should not export their Quciktime (.mov) files from Premiere Pro as Uncompressed AVI.  It just screws up the pixel precision. Not sure why.  Just use the old school .avi and the advice above. The renders will be perfect.

  • Which Playback Setting for 1080P

    Right setup is:
    Blackmage Decklink HD
    Final Cut Studio 2
    External Monitor connected through HD-SDI
    Footage XDCAM-EX 1080P 25fps
    My question is purely to do with External Playback. The sequence we are editing in is fine because we just match settings.
    So in External Playback Settings which one do we choose from the List.
    We normally shoot 1080 50i - so i normally choose "Blackmagic HDTV 1080i 25hz 10bit 1920 x 1080" and all works fine.
    However I want to choose a progressive setting to make sure playback on monitor is perfect but there doesn't seem to be an equivalent setting in the presets.
    There are 1080P settings but they aren't 25hz but 24 and 23.xxx settings which when we choose means the monitor will only show a still. Which normally indicates and incompatible mode.
    At the moment we are using the 1080i setting and it looks pretty good but "appears" to be a little motion blurred which i assume is the incorrect interlacing setting.
    Any help would be much appreciated.. and do let me know you need more information.
    Cheers
    Rob

    Thanks for the reply guys much apprecaited.. the monitory we are using is a Sony LMD2450. Which I hope is a nice monitor as it cost enough and lets us view at full pixels. We are connected to it using HD-SDI
    http://www.sony.co.uk/biz/view/ShowProduct.action?product=LMD-2450W
    Glad we have the correct setting for Blackmagic and think any slight weirdness in movement was us just expecting there to be some because of the setting.
    Sorry to ask another question but is there any good tutorials about setting up a monitor to work with FCP eg. for Colour Correction applications...
    Cheers and thanks again
    Rob

  • Correct Configuration for extending a wireless network

    I live in a brick and mortar double story house. Its built like a farady cage and radio signals really have a hard time. unfortunately, I also live in a 3rd world country where running ethernet through the house is not an option.
    I have bought 2 X Airport Extreme (simultaneous dual band II) firmware version 7.5.1 and one time capsule (simultaneous dual band II) also firmware 7.5.1 with the intention of wirelessly etending the network throughout the house.
    The internet access is provided through a huawei e920 3g HSDPA router in the garage with a high gain antenna on the roof (full signal, HSPA).
    The wireless on the huwai is disabled and it connects to the first Extreme with port 1 on ethernet. The Huwaei is set to provide DHCP.
    Question:
    1) What should be the first device in sequence? An extreme or the time capsule, i.e which of the three should connect directly to the Huawei via ethernet?
    2) When setting this up, i am asked questions about bridged or NAT, while I have some technical knowledge, I don't know the correct answer to this.
    3) What is a reasonable coverage are to expect? If all devices are on the ground floor, how many feet could I expect in range as a minimum (I wont hold you to any specifics
    4) If I use the extend network feature, do I still halve the available throughput for each device I add, as is the case with standard WDS on other brands?
    5) What is the maximum number of extremes of the same specification I can add to extend the network through the house?
    The reason I am asking, is that I have tried some configurations, however, I can never seem to get higher throughput than 600kbs.
    Please help.

    Welcome to the discussions!
    +1) What should be the first device in sequence? An extreme or the time capsule, i.e which of the three should connect directly to the Huawei via ethernet?+
    Your choice here. If the Time Capsule is going to be centrally located, then it would make sense to make it the "main" router.
    +2) When setting this up, i am asked questions about bridged or NAT, while I have some technical knowledge, I don't know the correct answer to this.+
    If the Huwaei is set to provide DHCP services, then the correct setting for the device that is connected to it is "bridge mode".
    +3) What is a reasonable coverage are to expect? If all devices are on the ground floor, how many feet could I expect in range as a minimum (I wont hold you to any specifics+
    In general, with line-of-sight available between the devices, you could position them 25-40 feet apart. With obstructions, you may need to place them closer to maintain signal strength.
    +4) If I use the extend network feature, do I still halve the available throughput for each device I add, as is the case with standard WDS on other brands?+
    The "extend" setup will maintain "n" wireless speeds with a bandwidth loss of perhaps 10-15% per device on average. WDS will drop the entire network down to "g" levels and halve the bandwidth for each "remote" device that you use. You would not want to use WDS.
    +5) What is the maximum number of extremes of the same specification I can add to extend the network through the house?+
    Apple does not furnish documentation on this, but a good hint might that AirPort Utility, the application used to configure all the devices, will display a total of 5 devices. If you think about the fact that you will be losing 10-15% bandwidth with each extending device, I would not exceed a total of 5 devices including your main router unless you plan to connect them using ethernet, not wireless.

  • Manual setting for dynet ddr2 667 memory

    i have msi p4m900m2 my problem is whenever i set the dram clock to auto or 667 in cmos my windows wont run and restart unexpectedly. but if i lower the clock to only 533 it will run. i just want to try to set the advanced dram configuration manually. what is the correct setting for dynet ddr2 667? 512mb
    thanks

     What I could find about that RAM is it's close to the bottom of the heap like that stuff that sells on eBay for $15-$20 a stick and it works or it doesn't. You take a gamble when you buy it. I search some other forums that ended up to be for the most part in India and the consensus was it's just about the worst stuff you can get.

  • Best setting for using still images for 16:9 format

    When using still images in FCP, what is the best setting to keep the images from stretching or warping when exported to be shown on a 16:9 format?

    Put them in a 16:9 sequence (is there any other way?) If they are distorted upon import, you can change their distort settings under "Distort" in the Motion tab of the Viewer. 33.33 is a good number to start with.

  • "Inadmissible movement type-acceptance at vendor set for PO item"

    Hi,
    Can any body tell me how I could solve message in MIGO"Inadmissible movement type-acceptance at vendor set for PO item"
    Regards,
    Anil

    Go into your PO detail delivery tab, there you will find origin accept indicator ticked.
    Inadmissible movement type -Message no. M7429

  • When I load certain websites the the writing is all squashed up. I correct this by changing the character encoding setting. I am using the latest Apple Mac machine. Thanks in advance

    When I load certain websites the the writing is all squashed up. I correct this by changing the character encoding setting. I am using the latest Apple Mac machine. Thanks in advance

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • The multi-tabs is not working all the time. Windows7 Firefox 4.0.1 I have the correct opetions set for multi-tabs.

    The multi-tabs is not working. I have the correct options set for multi-tabs. But when I open Firefox and try to add a site from Bookmarks it uses the same tab that is opened.

    Right click a tab and you will get the option to bookmark all tabs. Or use keyboard '''Alt + B''' which opens the old style menu. You can make changes to Firefox, as explained in this post: [/questions/799856#answer-155765]

Maybe you are looking for

  • Item number in billing document not matching with delivery document-reg

    Hi All, In the billing document the item number is coming from Shipment document. ie., there are three deliveries in a shipment. Each delivery has got one line item, ie., 10. These three deliveries are assigned to a shipment, the order in which the d

  • Is it possible to replace an 2011 iMac LCD with one from an HP Z1 desktop?

    The left side of my LCD screen is not receiving power, a problem that was addressed in one of the other threads, however I was unable to fix it and now need to replace the LCD completely. The HP Z1 all in one computers uses the same screen as the iMa

  • Mac Mail stops receiving mail after Shut down.

    It's hapend occasionally ever since Apple switched on iCloud and i moved from mobile me to iCloud. But now it seems everytime i shut my computer down at the end of the day then turn on in the morning i find Emails have stoped being recieved from iClo

  • PO Printing for Warehouse Users

    Hi all, My client raised a requirement for warehouse users to be able to print PO. Previously, a hard copy is passed over to warehouse personnel by the sourcing department. However, due to current location constraints, doing so is not feasible. Howev

  • Convert Mask path to shape path?

    Can I convert a Mask path into a shape path in AECS4? I am running into a problem with resizing my layers - I am animating a signature, and part of it was done as a shape, part of it as a mask that 'reveals' a signature (someone else created the orig