Correct settings for wireless broadband service

Ok, Im about to lose my mind over trying to get my wireless broadband connection working correctly.
I had the wireless broadband antenna installed on my garage. I mounted AEBS in my garage and connected it to the cable from the wireless broadband antenna. I can access the internet with no problems, but I have questions about the proper settings. (Im having printing issues that I didnt have with my phone line connected to the AEBS and I just want to start from scratch and try to understand how this should all be connected.)
Here are my questions:
1)     What settings should I be using on the AEBS for wireless broadband and which port on the AEBS should be used?
2)     Why is it that when I look at the status indicators in the Network settings control panel, it only will show yellow and never green?
3)     I have a second AEBS in the house, what is the best method to connect that one to the one in the garage?
Any help would be greatly appreciated. After I make sure this equipment is working OK, then Ill tackle the printing issue.

Thanks for the response
1)     I had to turn off DHCP on the AEBS in order for it to work. They supply an IP address. (If you cant tell, I dont know a lot about what Im talking about)
2)     I now have two AEBS and an Airport Express. I purchased another AEBS this weekend trying to solve the printer problem. I think your comment is related to my green status light that I mentioned. Actually what I was referring to is if you look at the system preferences in on the Mac and show the Network Status, it shows a red dot for anything that is not working and when Im at work connected to the network, it shows a green dot if everything is working ok. At home with the Wireless Broadband, I get a yellow dot which is kind of telling me that the connection is somewhat working.
3)     I currently have the two AEBS connected by using WDS and I dont plan to connect the AE until I make sure everything is working correctly and I can print again.
I assume I should be using the WAN port on the AEBS to connect the broadband. Im not sure why I cant use DHCP.
Thanks again

Similar Messages

OSB & WLST: changing operational settings for a proxy service via WLST

Hi all,
we are trying to change the operational settings for a proxy service via WLST.
In details we would like to change the "Logs" level (Monitoring section).
We have a lot of deployed services and our 'deployer people' need an automatic way (via WLST for example) for doing that instead of using the OSB console.
Thanks in advance
ferp

Hi,
OSB is the Oracle Service Bus. Oracle Service Bus is a configuration-based, policy-driven enterprise service bus.
The OSB is deployed into an Oracle WebLogic Server instance.
OSB uses also WLST functionality provided by WebLogic Server.
Best regards
ferp

Correct settings for HDV capture

Hi. I'm using Premiere CS5.5. I went on a few forums to get the correct settings for HDV capture.
I can record the footage fine. However I saw a few things which didn't seem right.
After capturing the HDV footage, the file was a .mpeg file. Secondly, the clip was 1 hour and 10 minutes and
it was only 11.3 GB. Does this sound right? A 55 minute .avi file is 11.6GB. I thought a HDV clip would be quite a large size file.
If this dosen't sound right, is there somewhere I could go to, to check that my settings are correct? By the way I'm filming and capturing with a Canon XHA1.
The footage is 1080i. HDV. I've exported it and it looks fine. Just want to make sure I've captured it correctly and to the best quality.
Thanks for your help.

The HDV format was advanced by Sony and others to use the same miniDV tapes used for SD. In fact, your Canon XHAI can record and play either without changing the tape transport speed.
Your observation in relative file sizes is due to the fact that HDV is highly compressed (MPEG), whereas, SD (AVI) is not as highly compressed. This is one of the reasons folks (such as Harm) don't consider HDV to be an edit format, but just a delivery format.
Note that what Harm was saying is symantics--you capture an analog source through a capture card that digitizes it. When you transfer a image file from HDV or SD, it is already digitized, so a bit-to-bit transfer occurs.

What are the correct settings for the Canon 5D mark II in FCP 7 ?

I am shooting full HD at 23s97 fps.. tried making a preset for the Canon but when I import fils FCP always wants to change to appropriate settings for this file type but doesn't tell me what that is...
(latest firmware installed)
Please, can someone provide all the correct settings for me?
And also, why doesn't the camera show up on the desktop/in the menus when attached to the mac? I have ro use EOS utility every time I want to get anything off of the camera... and FCP doesn't see it either. That's just not right - FCP MUST recognise my camera!! : (
Please help - I don't want to start editing until I have the right settings for this footage.
Thanks
Jim

Welcome to the Boards
Not sure what you mean with the following, looks like a word dropped?
I have ro use EOS utility every time I want to get anything off of the camera...
Anyway, some more specs on your system could help point where the issue is. With the new Plug-In by Canon you can Log & Transfer from the Flash Card (not sure how you connected the camera.) Alternatively you could just drag the files in (but make sure to keep all files such as THM in case you use Log and Transfer later.)
Generally it is best to transcode to Pro Res to be able to work with the files in Final Cut. (Log & Transfer should do that, or using Compressor/Mpeg Streamclip.)
It (Final Cut) is probably changing the timeline to match the codec, or depending on your last preset used, just switching things around. In other words if you were editing in DV and had a set up for that, new sequences would default to that and if you try to ad anything else you will get the message.
Take a look at the search over there -> to look for the Canon 5D threads for some more info.
What I would do is just pull one of the clips in to start and look at what the sequence settings are aftr Final Cut changes them for you - they should be fine generally, though you will want to change Codecs to Pro Res.
I like just batch conversion of all my clips from the 5D Markk II and then work from there. (I do not hook up the camera to the computer, just use a card reader.)

Which are the correct settings for gmail in MacBookPro

I want to use mac mail to access my gmail. Can I ? instead of going directly to web to access my gmail.? Which are the correct settings for the incoming and outgoing servers ?

Hi,
Yes. You can absolutely access your Gmail account from within either Mail or Microsoft Outlook for Mac. Make sure, that you have enabled POP/IMAP in your Gmail settings, then follow the instructions here: http://mail.google.com/support/bin/answer.py?hl=en&answer=180188 if you wish to access your account via POP3 instead of IMAP, change the incoming mail server to pop.gmail.com
Regards,
Gábor

Correct settings for DVD

Hi
I wish to know which are the correct settings for making a new project in imovie and then what to do for getting the best quality on DVD. (I use still pictures and video clips with music, transitions and effects)
Thank you so much.

ola
the correct format depends on the format your camera (PAL or NTSC - 4:3 or 16:9) meaning the project format should meet the camera format. pleas note that that format changes in iMovie/iDVD are effective only for new projects and cannot change existing ones. the dvd quality settings depend on the length of your movie and can be set in iDVD under preferences.
my movies are never longer than 30 min. so i set it to faster encoding and check background encoding ... i also tried with best quality once but frankly i can't see the difference
buona suerte & viva la mela

Make Settings for Skills Profile Service

Hi SAP Gurus,
I want to make the settings for Skills Profile Service in IMG. The documentation says "Switches QUALI DEST1 and QUALI DEST2 allow you to set up the system ID required for the RFC connection for ESS. "
How can I find out the required system ID?
Thank you in advance.
Best regards,
Nadin

hi p gopala
Go to IMG -> Cross-Application Components -> Homepage framework -> Resources -> Derfine Resources -> (Add Entries)
Double Click on Resource object "EMPLOYEE_SKILLSPROFILE_SERVICE".
Under URL of PCD page, you will find
ROLES:// portal_content/com.sap............
Delete this line and replace it with following..
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.ess.employee/com.sap.pct.ess.roles/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.area_career_job/com.sap.pct.ess.serv_career_job
save your entry.
Customizing request is created.
Release this request from 'SE09'
Restart the J2EE server.
Regards,
Kaushal

HT1277 i have all the correct settings for my e mail but i can't send for some reason it keeps taking my outgoing server offline

i have all the correct settings for my e mail but i can't send for some reason it keeps taking my outgoing server offline can anyone help

If you can receive mail and your connection to your ISP is otherwise working, but cannot send mail, then your SMTP settings are incorrect; the SMTP server port is wrong, your SSL setting is wrong, or the username or password credentials don't match what the ISP has, or your attempted accesses are being blocked or your ISP SMTP server is offline.
And in general, don't use port 25 for your outbound mail, unless your ISP specifically requires that; these days, that port is best left to communications between mail servers and (usually) not used by any mail clients.

What are the correct settings for my WRT54GS for using remote access on a Windows Home Server?

I can not remotely access my Windows Home Server from outside. What are the correct settings for my WRT54GS?

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

No internet connection for wireless broadband

Hello,
I have the HP TouchSmart IQ508A, Running Vista, 64 bit, SP2. on startup i get the same message that it cant find the bluetooth drivers. tried downloading from HP web site but it doesnt work. also now i can't connect my wireless broadband dongle. it istalls correctly but then wont show any signal or sometimes it shows signal but wont connect. it def works on other computers. i rang tech support for the dongle and they can't fault it and even offered a refund saying it was my computer at fault.
What can i try to fix these problems Please help!!!

Shannon561 wrote:
Hello,
I have the HP TouchSmart IQ508A, Running Vista, 64 bit, SP2. on startup i get the same message that it cant find the bluetooth drivers. tried downloading from HP web site but it doesnt work. also now i can't connect my wireless broadband dongle. it istalls correctly but then wont show any signal or sometimes it shows signal but wont connect. it def works on other computers. i rang tech support for the dongle and they can't fault it and even offered a refund saying it was my computer at fault.
What can i try to fix these problems Please help!!!
I suggest removing the driver via Device Manager, then re-installing the drivers from HP Recovery manager.
Make sure the bluetooth dongle and the drivers are compatible with Vista 64bit.
I have more HP devices than you'd expect.
1 HP TouchPad 32 GB with Android
2 HP Touchsmarts (310-1000z and IQ527)
2 HP Printers (J6480 and J5750)
1 Laptop (HP DV6253CL)
Have at least some experience in each of those devices, and i'll do my best to help you.
Kudos if I helped!

Need help with settings for my broadband.

when I first started with BT, I set up some time limits for my broadband usage so that my teenage children were not using the internet late at night but I now would like to change the times and I cannot find out how to do this?
Please can anyone help.
Currently my internet goes off at 11pm at night and on at 7am.

You can edit or delete the settings you already set.
Settings are under BT access Control in the hub manager.
Click on Apply to save any changes you make.
http://bt.custhelp.com/app/answers/detail/a_id/11364/c/346,1887,1891

Settings for idempotent enterprise services in ECC

Hi,
I want to use enterprise service ECC_GOODSMOVEMENTCRTRC1 / GoodsMovementERPCreateRequestConfirmation_In_V1 within a nonSAP application to post GoodsMovements at an ECC system.
http://es-workplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=…
The service works and I can do all movement types I want.
Now I want to have idempotency activated at the ECC system.
But nobody of the ECC guys knows, what has to be done for this.
What transaction has to be used?
Is there a default value for the time frame for which the system keeps responses for already processed service calls?
If not, I would propose 100 days, because this is the worst case, the nonSAP application could send a message again.
Are 100 days to large for the idempotency time frame of an ECC system?
Regards
Roland

Now I have got readonly permission for transaction SPRO at the ECC system.
The path to the idempotency settings is:
SPRO -> SAP Reference IMG -> Cross-Application Components -> Processes and Tools for Enterprise Applications -> Enterprise Services -> General Settings for Enterprise Services -> Define Settings for Idempotent Services
Permission for transaction WSIDPADMIN is required to execute the activity "Define Settings for Idempotent Services". I don't have this.
But there is a good explanation in SPRO what has to be done in "Define Settings for Idempotent Services"
Define Settings for Idempotent Services
Use
Enterprise Services for which you need to ensure that every service call is executed precisely once are called idempotent services.
You use this IMG activity to define how long the system keeps stored response messages or details about query messages (the message IDs) for which responses have already been sent for synchronous Enterprise Services. You have to define this for each client in which you wish to use synchronous Enterprise Services.
In order not to burden the database by storing the response messages or message IDs unnecessarily long, the system schedules two background jobs to regularly delete stored response messages and message IDs:
SAP_BC_IDP_WS_SWITCH_BD for response messages
SAP_BC_IDP_WS_SWITCH_BDID for message IDs
The system uses table pairs to ensure that the response message or the ID of the answered query message is deleted as soon as possible once the set retention period has expired:
One table pair for each client for the response messages
One table pair for each client for the message IDs that have been stored
The two tables of a table pair are entered alternately. When switching from the first table to the second, the data in the first table is retained and that in the second table is deleted before the system generates new entries.
You decide how ofter the system switches back and forth between the tables of a table pair. The result is the minimum retention period for the stored data.
Requirements
This function is available to you as of SAP NetWeaver 2004s SP09 and ECC SE 600 SP03.
Activities
In the Document section, define the minimum retention period for the response messages. You do this by specifying how often you want the system to switch between the two tables.
In the Document ID section define the minimum retention period for the message IDs. You do this by specifying how often you want the system to switch between the two tables.
SAP recommends you define a longer retention period for the message IDs than for the response messages. Bear in mind that a repeated query message leads to an error if the corresponding response message has already been deleted but the message ID is still available.
To save what you have defined, choose Schedule.
Repeat steps 1 to 4 for all clients in which you wish to use Enterprise Services.
Example
You have defined the time for switching between the two tables in which the response messages are stored as two hours. This means that the response messages are kept for at least two hours but for no more than four hours.
You have defined the time for switching between the two tables in which the message IDs are stored as one day. This means that the message IDs are kept for at least one day but for no more than two days.

SAP on Ubuntu Correct settings for etc/hosts?

Hi,
I installed the SAP test drive version on Ubuntu (VirtualBox). After starting the SAP GUI (
/home/minisap/SAPClients/SAPGUI7.20rev5/bin/guistart /H/ubuntu64/S/3242
) I get the following error:
Error: partner 'ubuntu64:3242' not reached
Sun Feb 5 14:07:26 2012
Release 720
Component NI (network interface), version 40
rc = -10, module nixxi.cpp, line 3286
Detail NiPConnect2: 127.0.0.1:3242
System Call connect
Error No 111
'Connection refused'
I guess that the settings of the file etc/hosts are not correct. After the installation of ubuntu the file contains
10.0.2.15    ubuntu64    # Added by NetworkManager
127.0.0.1    localhost.localdomain    localhost
::1    ubuntu64    localhost6.localdomain6    localhost6
127.0.1.1    ubuntu64
# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
According to the test drive readme file I have to ensure that etc/hosts contain at least the following lines:
127.0.0.1      localhost
n.n.n.n      <HOSTNAME>.<DOMAINNAME>      <HOSTNAME>
n.n.n.n      nplhost
where "n.n.n.n" is a valid IP-adress.
I tried different settings but the above mentioned error still occurs... Does anyone know the correct settings of etc/hosts or know what the problem could be?
Thanks and regards

OK, I logged on as user nnpladm and typed
startsap nplhost
ps -ef|grep sap
ps -ef|grep sap
sdb       3424     1 0 16:15 pts/1    00:00:00 /sapdb/NPL/db/pgm/vserver -sdbstarter 1002 1003 A -S 7200 -Y
sdb       3425 3424 0 16:15 pts/1    00:00:00 /sapdb/NPL/db/pgm/vserver -sdbstarter 1002 1003 A -S 7200 -Y
sdb       3428     1 0 16:15 pts/1    00:00:00 /sapdb/programs/pgm/niserver
sdb       3448     1 0 16:15 ?        00:00:00 /sapdb/NPL/db/pgm/kernel NPL -diagpipe 16
sdb       3451 3448 0 16:15 ?        00:00:02 /sapdb/NPL/db/pgm/kernel NPL -diagpipe 16
npladm    4903     1 0 16:16 ?        00:00:00 /usr/sap/NPL/SCS00/exe/sapstartsrv pf=/usr/sap/NPL/SYS/profile/START_SCS00_nplhost -D
npladm    5187     1 0 16:16 ?        00:00:00 sapstart pf=/usr/sap/NPL/SYS/profile/START_SCS00_nplhost
npladm    5209 5187 0 16:16 ?        00:00:00 ms.sapNPL_SCS00 pf=/usr/sap/NPL/SYS/profile/NPL_SCS00_nplhost
npladm    5210 5187 0 16:16 ?        00:00:00 en.sapNPL_SCS00 pf=/usr/sap/NPL/SYS/profile/NPL_SCS00_nplhost
npladm    6414     1 0 16:16 ?        00:00:00 /usr/sap/NPL/DVEBMGS42/exe/sapstartsrv pf=/usr/sap/NPL/SYS/profile/START_DVEBMGS42_nplhost -D
npladm    6700     1 0 16:17 ?        00:00:00 sapstart pf=/usr/sap/NPL/SYS/profile/START_DVEBMGS42_nplhost
npladm    6740 6700 0 16:17 ?        00:00:00 ms.sapNPL_DVEBMGS42 pf=/usr/sap/NPL/SYS/profile/NPL_DVEBMGS42_nplhost
npladm    6742 6700 0 16:17 ?        00:00:00 ig.sapNPL_DVEBMGS42 -mode=profile pf=/usr/sap/NPL/SYS/profile/NPL_DVEBMGS42_nplhost
npladm    6755 6742 0 16:17 ?        00:00:00 /usr/sap/NPL/DVEBMGS42/exe/igsmux_mt -mode=profile -restartcount=0 -wdpid=6742 pf=/usr/sap/NPL/SYS/profile/NPL_DVEBMGS42_nplhost
npladm    6756 6742 0 16:17 ?        00:00:00 /usr/sap/NPL/DVEBMGS42/exe/igspw_mt -mode=profile -no=0 -restartcount=0 -wdpid=6742 pf=/usr/sap/NPL/SYS/profile/NPL_DVEBMGS42_nplhost
npladm    6757 6742 0 16:17 ?        00:00:00 /usr/sap/NPL/DVEBMGS42/exe/igspw_mt -mode=profile -no=1 -restartcount=0 -wdpid=6742 pf=/usr/sap/NPL/SYS/profile/NPL_DVEBMGS42_nplhost
npladm    7930 1544 0 16:47 pts/1    00:00:00 grep sap
telnet ubuntu64 3242
Trying ::1...
Trying 127.0.1.1...
Trying 10.0.2.15...
telnet: Unable to connect to remote host: Connection refused

Anyone have the correct settings for iCloud in Outlook 2011 with OS X 10.7.2 ?

I have tried setting up iCloud in my outlook 2011 on my iMac. I get an error "[AUTHENTICATION FAILED] Authentication failed] Your username/password or security settings may be incorrect.
I have tried several posted settings, for example:
Incoming Server: imap.mail.me.com
Checked Use SSL
Port 993
Outgoing server: smtp.mail.me.com
Checked Overrise default port
Checked Use SSL
Port 587
I have also tried adding p99- in front of both server names, still didn't work.
Anyone have a solution?

Julian Wright wrote:
Here are Microsoft's own instructions for setting up iCloud email in Outlook for Mac:
http://support.microsoft.com/kb/2648915
Just an FYI Julian, Unfortunately in that document MicroSoft have given the Mobile Me server addresses so it doesn't work with iCloud.
If you substitute iCloud server addresses (imap.mail.me.com etc) these instructions work.

What are the correct settings for my wireless-n router?

I was just upgraded at home with a Huawei HG8245 Fiber Optic Wireless-N router. The default Setting is:
WPA/WPA2 Pre-Share, TKIP/AES, Auto Channel and 20Mhz Channel Width.
I cannot surf past 10 feet from the router. I switched the Security to TKIP, and it goes to Wireless-G and I can surf all around my apartment. I did AES only, goes back to Wireless-N, and again the 10 feet issue. Selected WPA2 only...same thing.
Any ideas or solutions?
Paul

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

Correct settings for wireless broadband service

Similar Messages

Maybe you are looking for