Correct settings for your phone
During the last week I have spent many hours trying various settings. I then found a site where you pay £1 and they send the settings to you. It worked very well. I just had to fill in online the details of my phone, its service provider and if it was on a contract or PAYG. No doubt there are several companies who do this. I used "configuremyphone.com" They send the settings on a text to your phone and give you a pin number to use which then moves the settings in the text to the correct locations in your phone.
It probably reset the access point for the browser.
First make sure that the access points are ordered correctly in your internet destinations and also check that "Internet" is the default destination.
Then, from within the browser, check the settings and make sure that it uses "default" as its access point. It will then attempt to connect via the WLAN and, if it's not available, go for the packet data service.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!
Similar Messages
-
Finding the correct settings for your smartphone?
I recently spent many hours experimenting with settings. I then found that some websites offer you a service (I had to pay £1). Online I had to give details of my phone, its provider and wether it was contract or PAYG. They then send the settings to you in a text to your phone and a separate message with a pin. You put the pin in on your phone and the settings are transferred from the text to the settings area of your phone. My problems were solved!
I used "configuremyphone.com" No doubt there are other providers too.It's jusy as easy and cheaper (free) to use your operator's website to do the same thing...
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
Correct settings for HDV capture
Hi. I'm using Premiere CS5.5. I went on a few forums to get the correct settings for HDV capture.
I can record the footage fine. However I saw a few things which didn't seem right.
After capturing the HDV footage, the file was a .mpeg file. Secondly, the clip was 1 hour and 10 minutes and
it was only 11.3 GB. Does this sound right? A 55 minute .avi file is 11.6GB. I thought a HDV clip would be quite a large size file.
If this dosen't sound right, is there somewhere I could go to, to check that my settings are correct? By the way I'm filming and capturing with a Canon XHA1.
The footage is 1080i. HDV. I've exported it and it looks fine. Just want to make sure I've captured it correctly and to the best quality.
Thanks for your help.The HDV format was advanced by Sony and others to use the same miniDV tapes used for SD. In fact, your Canon XHAI can record and play either without changing the tape transport speed.
Your observation in relative file sizes is due to the fact that HDV is highly compressed (MPEG), whereas, SD (AVI) is not as highly compressed. This is one of the reasons folks (such as Harm) don't consider HDV to be an edit format, but just a delivery format.
Note that what Harm was saying is symantics--you capture an analog source through a capture card that digitizes it. When you transfer a image file from HDV or SD, it is already digitized, so a bit-to-bit transfer occurs. -
What are the correct settings for the Canon 5D mark II in FCP 7 ?
I am shooting full HD at 23s97 fps.. tried making a preset for the Canon but when I import fils FCP always wants to change to appropriate settings for this file type but doesn't tell me what that is...
(latest firmware installed)
Please, can someone provide all the correct settings for me?
And also, why doesn't the camera show up on the desktop/in the menus when attached to the mac? I have ro use EOS utility every time I want to get anything off of the camera... and FCP doesn't see it either. That's just not right - FCP MUST recognise my camera!! : (
Please help - I don't want to start editing until I have the right settings for this footage.
Thanks
JimWelcome to the Boards
Not sure what you mean with the following, looks like a word dropped?
I have ro use EOS utility every time I want to get anything off of the camera...
Anyway, some more specs on your system could help point where the issue is. With the new Plug-In by Canon you can Log & Transfer from the Flash Card (not sure how you connected the camera.) Alternatively you could just drag the files in (but make sure to keep all files such as THM in case you use Log and Transfer later.)
Generally it is best to transcode to Pro Res to be able to work with the files in Final Cut. (Log & Transfer should do that, or using Compressor/Mpeg Streamclip.)
It (Final Cut) is probably changing the timeline to match the codec, or depending on your last preset used, just switching things around. In other words if you were editing in DV and had a set up for that, new sequences would default to that and if you try to ad anything else you will get the message.
Take a look at the search over there -> to look for the Canon 5D threads for some more info.
What I would do is just pull one of the clips in to start and look at what the sequence settings are aftr Final Cut changes them for you - they should be fine generally, though you will want to change Codecs to Pro Res.
I like just batch conversion of all my clips from the 5D Markk II and then work from there. (I do not hook up the camera to the computer, just use a card reader.) -
Hello,
this morning I received the following error message when the iPhone connected to iTunes: i
tunes could not check for an update to the carrier settings for your iphone. an unknown error occurred (1635)
any ideas? thxI get the same error (although in Dutch ;-)).
It also says something like (I'm translating): "Make sure your network settings are correct and your networkconnection is active or try again later." Is there a way to find out these "correct networksettings"?
I now get it for a week, eacht time I connect my iPhone to itunes... -
Which are the correct settings for gmail in MacBookPro
I want to use mac mail to access my gmail. Can I ? instead of going directly to web to access my gmail.? Which are the correct settings for the incoming and outgoing servers ?
Hi,
Yes. You can absolutely access your Gmail account from within either Mail or Microsoft Outlook for Mac. Make sure, that you have enabled POP/IMAP in your Gmail settings, then follow the instructions here: http://mail.google.com/support/bin/answer.py?hl=en&answer=180188 if you wish to access your account via POP3 instead of IMAP, change the incoming mail server to pop.gmail.com
Regards,
Gábor -
Hi
I wish to know which are the correct settings for making a new project in imovie and then what to do for getting the best quality on DVD. (I use still pictures and video clips with music, transitions and effects)
Thank you so much.ola
the correct format depends on the format your camera (PAL or NTSC - 4:3 or 16:9) meaning the project format should meet the camera format. pleas note that that format changes in iMovie/iDVD are effective only for new projects and cannot change existing ones. the dvd quality settings depend on the length of your movie and can be set in iDVD under preferences.
my movies are never longer than 30 min. so i set it to faster encoding and check background encoding ... i also tried with best quality once but frankly i can't see the difference
buona suerte & viva la mela -
when I click on check for update I get error, iTunes could not check for an update to the carrier settings for your iPhone. an unknown error occurred 1630
Make sure your network setting are correct and your network connection is active or try again latter.update your itunes to 10.5.2 and error is not showing up anymore..
-
i have all the correct settings for my e mail but i can't send for some reason it keeps taking my outgoing server offline can anyone help
If you can receive mail and your connection to your ISP is otherwise working, but cannot send mail, then your SMTP settings are incorrect; the SMTP server port is wrong, your SSL setting is wrong, or the username or password credentials don't match what the ISP has, or your attempted accesses are being blocked or your ISP SMTP server is offline.
And in general, don't use port 25 for your outbound mail, unless your ISP specifically requires that; these days, that port is best left to communications between mail servers and (usually) not used by any mail clients. -
helo, my iiphone is unlock and i upgrade to 5.1 version when the upgrade finish i get this question-An update to the carrier settings for your iPhone is available. Would you like to download it now? is there a resone not to upgrade, will he become lock?
If your phone is factory unlocked, or officially unlocked by your carrier, updating will NOT re-lock the phone. If it was unlocke by unauthorized methods, any update or restore will re-lock it.
-
iTunes keeps popping up a dialog box that says "An update to the carrier settings for your iPhone is available. Would you like to download it?" What is this? When I click on the "Learn More" button in the dialog box it takes me to a generic iTunes support page that has no relevance to carrier settings.
I got this three times within the last 4 hours and have been getting it almost every day since I use my new iPhone 6 - over a week now. This happens almost every time I connect the phone to my MacBook Pro, although every time I confirm and it indicates successful update.
It is highly unlikely that my carrier updates settings on daily basis or three times a day. It is almost surely a bug in the Apple system and anything but a timely and effective solution is unacceptable.
For debugging information, I recovered a backup from my former iPhone 5 onto the new one, using the same carrier and SIM. -
On IOS 7, how can you tell when your battery is charging for your phone?
on IOS 7, how can you tell when your battery is charging for your phone?
thanks everyone=you all helped.
I wasn't used to not getting the 2 sided plug- now I know I am ok>
**hugs** -
When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.
If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa
-
When I tried to sync my 4G iphone factory unlocked to iTunes I got this message "An update to the carrier settings for your iPhone is available. Would you like to download it now?" Should I hit "Download and Update"? or "Learn More" ?
I have a factory unlocked iPhone 3GS (eg: purchased from Apple). I received the same message at some point and eventually (after reading a bit more) accepted "Download and Update". No problem. No apparent bad effects. It just seems to update things specific to the carrier (Bell Mobility in my case).
-
Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...
The main settings that are changed in these cases can be found in this article:
http://support.apple.com/kb/ht1386
To ensure you don't lose any data you don't want taken off, ensure that each Summary, Apps, Music, Movies, TV Shows, Podcasts, iTunes U, Books, & Photos have the settings you would prefer on the computer.
If anything gets changed on any of those pages, you will be prompted with that message. If they look fine, especially after adding some media like songs or videos, then you can apply the changes without fear.
Maybe you are looking for
-
No Airprint in the Share Menu!
if i press the share icon in any of the apps that there is no print option in photos are only the "send as e-mail" and "wallpaper" option
-
How to set destination for cffile
Dear all , I have a problem with <cffile> : my CFM file is in : http://www.demo.com/panel/upload.cfm i want to store the file in http://demo.com/gallery/news folder so : <cfset file_name="demo.jpg"> <cffile nameconflict="overwrite" action = "uploa
-
Hi all I want to manage a weight items on a window "Purchase Order" that is to say: Total Payment Due =(weight x Unitprice) + Tax ; and how do appears a weight items column in "Stock Posting List". Thanks
-
SQL 2005 mirroring - time taken to fail over?
I'm looking for an easy way to 'measure' the amount of time it takes our principal Database Server to fail over to our mirror Server in which all regular service will be resumed. Any help would be hugely appreciated Thanks guys ras
-
HP Officejet J6480 All-In-One'[]
I am running windows vista and I am able to print doc. from my files and off the web, but...I can not print my pictures that I have filed but was able to a week ago. Does anyone have any suggestions? I have checked all the off line/on line, que, p