Correct the 2 problems before updating this airport wireless device

Hi, guys.
I want to access my Time Capsule from the internet.
But i already have a router establishing my internet connnection, so i've set it to connect using Ethernet and wireless mode is off.
This setting doesn't show the "share disc over WAN" and i need that. (As far as i can tell). Therefor i have to switch the connection mode from Off (Bridge Mode) to share a public IP - this enables the "share disc over WAN" option.
But TC returns this message to me when updating the device. "Correct the 2 problems before updating this airport wireless device".
I'm confused? Cuz i thought they should mirror my Routers local IP's?
What do i do? Please help, any advice is much appreciated.

The Asus model that you mentioned is definitely a router, so it is handling DHCP services for your network.
If you have the Time Capsule set up in Bridge Mode, I cannot understand why you are getting a message about DHCP address conflicts....since DHCP is turned off when the Time Capsule in Bridge Mode.
Unless....you have tried to change some settings around manually.
It would probably be best to start over and perform a factory default reset on the Time Capsule, then configure it again. The last setting to check before you click Update would be to make sure that the setting for Connection Sharing is set to "Off (Bridge Mode)".
As far as connecting from the Internet....that's another question since everything that I've seen assumes that the Time Capsule is configured as the main router on the network. I cannot recall seeing a setup when the Time Capsule was not the main router on the network, but will check around.

Similar Messages

For my new Airport TC I have an error this version of AirPort Utility doesn't support this AirPort wireless device. How do I find and download the latest version of AirPort Utility?

For my new Airport TC I have an error this version of AirPort Utility doesn't support this AirPort wireless device. How do I find and download the latest version of AirPort Utility?

https://itunes.apple.com/us/app/airport-utility/id427276530
AirPort Utility for iOS requires iOS 5 or later.
AirPort Utility 6 requires OS X 10.7.5 or later.

HT201210 been trying to restore ipod touch for days after updating itunes. keep getting error #9. Tried it on 2 computers, with vista + XP. tried all the solutions posted. nothing is working. Thanks Apple. Didn't have this problem before updating itunes!

Been trying to restore Ipod touch for days after updating Itunes. Error code #9. Stuck on restore screen. Tried all the solutions posted. Tried on 2 computers, Vista + XP. No device shown on computer. Thanks Apple! Didn't have this problem before update. How about rolling back your update?

Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

It means that iDVD has found a problem with one of the movies added to the project. Did you edit the movie after it had been added to the project.
Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

There are purchased items on the iPhone "asingh's iPhone" that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating this iPhone. Are you sure you want to continue?

When I am trying to upgrade my iphone to IOS7.0.2 by connecting my my iphone and macbook, it shows "There are purchased items on the iPhone “asingh’s iPhone” that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating this iPhone. Are you sure you want to continue? ". I hit the same issue and lost a lot of apps from my iphone. Can someone help on how to resolve this issue? I can automatically upgrade my software on the iphone but how shall I resolve any future updates of "Apps"?

I appreciate the answer, but what you describe is not entirely accurate. First, to even see view, you have to enable the menu by clicking on the icon in the upper left. View allows you to show the sidebar.
Second, you will NOT see your devise listed in sidebar or anywhere else. Instead, you have to click on "devise" from the sidebar menu, wait a minute, and then it will finally show up under "devise." Or maybe it just takes a minute to show up whatever you do.
Third, right clicking on your devise will take you to a menu with "transfer my files" on it, but then iTunes will refuse to make the transfer. Instead, it will tell you that <your apps> on your <devise> could not be transferred to iTunes "because you are not authorized for it on your computer." Apple unhelpfully suggests going to store> authorize this computer. There is a "store" menu item on the sidebar, but it has no "authorize this computer" sub-menu. Instead, go to the horizontal menu at the upper left, and THERE you will find "store" and the "authorize this computer" sub-menu. Now you can transfer your files, to who knows where.
My iPhone 5 is my first Apple devise. So far my experience has been, to do A, which must be done right now, you must first do B. To do B you must first do C, which is unexplained save in answers in user forums. To do C you must first do D, which, after several hours of research and puzzle solving, can eventually be done.

Do I have to uninstall the CS4 software before updating the NVIDIA driver and reinstall CS4 after?

I have just installed CS4 on Windows 7 and I get the message that I need to update NVIDIA driver.
Is it really neccassary to update driver even if I have no problems using Photoshop?
Do I have to uninstall the CS4 software before updating the NVIDIA driver and reinstall CS4 afterwards or is there a way around it?
Here are the technical details:
Processor speed: 3325 MHz
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 220/PCI/SSE2
OpenGL Drawing: Enabled.
Video Card: NVIDIA GeForce GT 220
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Driver: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
Driver Version: 8.15.11.8627
Built-in memory: 3063 MB
Free memory: 1981 MB
Memory available to Photoshop: 1643 MB
Memory used by Photoshop: 60 %
Image cache levels: 4

I have never had to reinstall any program for a video driver.
Now, check out the instructions for your particular nVidia driver, and the exact steps can differ. Just did my Quadro FX-4500 and it was just an install over the older driver. However, looking at another nVidia card's driver, and there were 3-4 settings in the nVidia console, that had to be reset BEFORE installing that driver. Did not affect me, but would have been a different operation for the next guy, with a different nVidia card. nVidia makes it easy with the necessary instructions - follow those to the letter, or issues can arise and the entire driver can get hosed. Things could be a simple as download, and execute, to having to do several things before you execute.
Good luck,
Hunt

Trying to update iPad getting message ... You should transfer movie rentals to iTunes library before updating this iPad.

How do I transfer movie rentals from iPad to iTunes library to update to 5? I get a warning message to move them but not sure how?

Same thing here.
Windows 7 64 Pro - iTunes 64 bit version 10.6.3.25.
Trying to upgrade iPhone 4 to 5.1.1 (from 5.1 (9B176)).
File -> Transfer Purchases from "My iPhone" - succeeds.
Right-click My iPhone -> Transfer Purchases - succeeds.
Try to update - still get the error message: "There are purchased items on the iPhone "My iPhone" that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating this iPhone. Are you sure you wannt to continue?"
Power cycled phone - made no differenced. Ejected, reconnected,..no difference.
Very frustrating. Any ideas?

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this?

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this? Also, I cannot connect to my Photosmart b209a printer, though a different computer - same Macbook Pro can. I tried redownloading the software, but in the setup I get a "device not reachable" message: "However to continue configuring the device in network, your Mac must have access to the device. So please make sure that your Mac has access to the Network ..." I've checked my network on the system preferences and it's properly connected. I'm on the net as I do this. Tis very frustrating, and any assistance woud be appreciated.

Airport Utility is for administration of genuine Apple Base Stations. If you have a different Brand, Airport Utility can do nothing for you.
I think they're using ethernet.
To connect a Printer via Ethernet, no password is needed.
We already tried the password for the internet and that did not work...
If a password is required to connect to the Internet, then WiFi is likley being used, and that WiFi password is the one needed for the Printer connect wirelessly as well.
What make&model Printer? Is it indeed a Wireless Printer? Most connect via USB, but that would force it to use a specific computer to assist in printing.

Since I have upgraded to ios7 my internet banking page will not fit the screen. Before updating I enlarged the page by using the *2 button in the bottom right hand of the screen, there no longer is that option?

Since I have upgraded to ios7 my internet banking page will not fit the screen. Before updating I enlarged the page by using the *2 button in the bottom right hand of the screen, there no longer is that option?

Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

I have had a time capsule for years and it worked well. Now my airport utility states it is unable to find any airport wireless devices. When I rescan, I get the same response. I access the internet wirelessly through my Time Capsule - that part works.

My time capsule is currently not backing up my MAC. My airport utility states it can't find any airport wireless devices. But I can access the internet via my time capsule. I was trying to reset my time capsule but it won't let me since the airport utiity states it can't find any airport wireless devices.

i was having the same problem. i held the reset button on my airport express for ten seconds, waited for it to restart and than unplugged my internet modem for 15 seconds and waited for it to restart and my wireless worked. but when i go to setup everything through the airport utility everything goes to crap and i have to start over again. i don't get it.

How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

Airport utility was unable to find any airport wireless device

Installed Airport Extreme connected to my PC running XP Pro. Configured my wireless network successfully. Updated to Aiport Utility for Windows ver 5.5.2 and the Airport Utility shows the 'unable to find an Airport wireless device' message and the 'Rescan' button. I uninstalled the upgraded Utility software, unplugged the Airport Extreme, installed the original software from the supplied disc, held down the reset button while plugging the power back in and waited till I got the amber/green fast flashing lights at which time I released the reset button. No change. Then upgraded the Airport Utility back to 5.5.2 and still no change. I can connect to the web from my PC and to an open wireless network named Apple Network f9561d.
Any help getting access to my Airport Extreme greatly appreciated. Thx

PC was/is always directly connected to Airport Extreme via ethernet. Windows XP Pro firewall always has been disabled (double checked). No firewall software. Disabled PC Tools malware protector. No virus protection or scanning software.
Only things showing in toolbar are NVidia Settings, Windows Volume Control, Network Connection icon,Safely Remove Hardware Icon and the time.
Don't have anything running that would block any ports.
Airport Utility for Windows is version 5.5.2.
Did another factory(?) reset as described before and pressed 'Rescan' button 15 times with no change. Devices connected via wireless are Nexus smartphone & HP laptop running Vista. All can access Internet, but slowly.
Tried rebooting PC several times with no difference. Tried plugging the PC ethernet cable into different ports in the Airport Extreme before I realized that I could always access the Internet from the PC so I was wasting my time : )
Tonite I unhooked my DLink wireless router, hooked up the Airport Extreme, installed the software, configured the network (perfectly) and then checked for and installed the
Airport Utility software upgrade (no others). As soon as it finished installing, I ran it and ended up with the error. I didn't install anything else or even run any other software. I saved the configuration, checked for and installed the upgrade. I haven't changed ANY settings on the PC or run any software other than Firefox to create my Apple account to report this problem.
Any help greatly appreciated.

Airport Utility can no longer find my airport wireless devices

I have sucessfully installed a new Airport Extreme and Airport Express in the house and everything including iPad, Apple TV, Sonos and iPhones are all connect up and running fine.
I am using a Laptop running Windows 8 that is also connected and on line.
I tried to connect a WD external hard drive this morning. Since then when I open the Airport Utility on my Laptop an error message appears stating that "Airport Utility unable to find any Airport wireless devices."
This isn't creating any real problem as I dont have an urgent need to access the Utility programe but does anyone know why this error has occurred and what I can do to rectufy the problem?

Turn of the MG and unplug the power cord. Leave it off for about a minute and then reconnect the power cord and turn the power back on. Wait while the device attempts to reconnect to your wireless network - the blue wifi symbol on the MG will flash and then stay on once it has connected. If it keeps flashing then you will have to reconnect the MG to your wireless access point via the control panel on the MG.

AirPort utility unable to find any AirPort wireless devices

Hi All,
I have an issue I have no idea how to resolve. I recently purchased a 2TB Time capsule and after a few teething issues have had it working as both router and external storage. I have spent the last 2 weeks transferring all my media to this for central access from all networked computers.
Its been running fine the whole time until today. For some reason my internet connection was dropped. I turned off the TC and my Modem, and then restarted in the right order.
WiFi connection is Excellent. I can connect to my mapped TC drive, but I cannot connect to either the internet (my network is now only allowing 'Local Connection') and the Airport utility is unable to find any Airport wireless devices. I was hoping i'd be able to see an issue through the utility but it cant even recognise the device!
I am yet to do a hard re-set of the TC as I want to avoid having to go through the network set up again and I assume this is the information that is lost? I'm also concerned I will lose the content of the TC and i really dont have the time or the patience to go through that exercise again.
Any ideas?
Thanks in advance,
Mark

Thanks for the quick response!
My Modem is not the issue in this case as I have already connected via network cable directly to it and am using it to connect to the internet now.
I had issues with IP conflict etc when setting up the network and suspect something similar this time, except I cant even open the TC to check the set up as AirPort utilities cant see it.
I think I have the TC doing the routing as all periphrals attached to the network were getting a 10.0.1.x IP address, but I have to confess this is not my forte and neither is pinging things as I dont understand any of the information that comes back!
I assume the hard re-set option is a last resort? I'm tempted to just do it as I cant see I'll be any worse off than now... but I'll hold off and do the proper diagnosis.
Unfortunately I'm away for the next 2 days so wont get this resolved before then... I have the internet hard wired so that will keep the wife happy... but i will look into this further and report back with more details on my return.
Thanks,
Mark

Trying to set up time capsule but keep getting message stating airport utility was unable to find any airport wireless device. What do I do know?

Trying to set up my time capsule on my imac.
Keep getting message "Airport utility was unable to find any airport wireless devices."
What do I do now?
joglenn

When having difficulties accessing the Time Capsule (TC) via the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
Check the local connection. If you are trying to access the TC wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the TC's LAN ports.
Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
Perform a "factory default" reset on the base station.
Finally, if you are attempting to access the TC via an Ethernet connection, be sure that your Ethernet port is NOT configured for Jumbo Frames, i.e., using an MTU of 9000+.

Correct the 2 problems before updating this airport wireless device

Similar Messages

Maybe you are looking for