Correct way to export uncompressed to get a product aired on TV

Hello all,
just finished editing a 50 minute doc that will be aired on Greek TV
I edited with most of my footage beeing DV-pal 16:9 so I edited on a sequence with these kind of settings.
I exported a "current settings" version and took it to an AVID and recorded a BETASP tape with that.
but people tell me that I should export uncompressed for better results
I just did, but instead I get about 20 files all sized about 2 GB, they are name like I named the project but project av1, project av2 etc
the last file has the name of the project is a playable mov file, but it's only 2.6 GB big.
The current setting export was 11.5 GB, the uncompressed TEST I did for one (1) minute of footage to test the size requirements was 1.3 GB, so IT DOESNT MAKE SENSE TO ME to have the 50 min documentary sized 2.6 GB
1) What am I doing wrong? if anything
2) whats the best export way to get broadcast quality and view the project just like on my Mac?
3) the uncompressed export changes my aspect ratio into streched 4:3, but I guess that players can fix that ....right?
Any help would be musch appreciated, people in here saved me on deadlines more than once...thank you in advance

now then I must find out more:
Danny D, I watch anything of his, not listed as transmitted here
this is a much bigger show than I would expect to use the DVX 100, to our thinking this is a very brave and weird choice of camera, certainly not chosen to keep costs down, but I dont know the situation in the USA, you would never get away with this in the UK
So I wonder... If something is shot correctly, would anyone at the EBU ever know?
The compliance sheets must state complete workflow: cameras, links, recording, editing........
if a broadcaster flouts the regs there are very heavy fines so you just dont play silly.
I also wanted to ask... does cable programming in Europe have different standards?
with cable satelite and digital terrestrial mainstream broadcasters allocated a full bandwidth chanel must produce programming to full EBU specs
''Community chanels'' low bandwidth chanels, can distribute non broadcast originated material - sound and vision must be to correct levels.
so all the shopping channels must have full EBU spec studios cameras and gallery the sound and picture quality is as good as a studio based drama
I'm learning a great deal here today!

Similar Messages

I need advice (for the best way to exporting uncompressed files)

Using Final Cut Pro to animation(2D) project(30fps), I've experienced a problem exporting uncompressed TGA image sequence files.
Here's the workflow I use:
File> Export> QT Conversion> Image Sequence> Options> TGA, uncompressed 8bit, millions of color, 30 fps> OK
After exporting a files, I supposed to get 1MB each(file size), but I got less than 1MB each(file size). It tells us that those are compressed files. The size of files is random. when I use Avid Nitris there is no problem but it is different with the Final Cut Pro.
Do you know what is the best way to exporting uncompressed TGA image sequence files out of FCP? (for Best Quality Output)
Thank you in advance.
Jasmine

Patrick,
I'm sorry it has taken me so long to reply you. I can't post your request, because Avid is not here. So I will post another example, and I have another question. This is the nearset approach to problem. See below images.
I use QuickTime 7.1 and Final Cut Pro 5.1.1 in the PowerMac G5 2.0 Ghz.
1. File > Export > QT Converstion > Image Sequence > Options > TGA, 30, Best Depth
I supposed to get 1MB each, but I got less than 1MB each. It tells us that those are compressed files, and shows up low quality images. (besides, The size of files is random.)
2. File > Export > QT Converstion > Image Sequence > Options > TIFF, 30, Best Depth (Compression: None)
Finally, I was a great success See the files size: all 1MB each. I can get the result that I want/___sbsstatic___/migration-images/migration-img-not-avail.png
OK, now question, I will tell you.
Why have a different result? (TGA vs TIFF)
'TIFF options' have a compression option, but 'TGA options' haven't it. So 'TGA image sequence' can't make uncompressed files. For what reason? Do you know any particular reason?
: TGA Options haven't compression option.
: TIFF Options have a compression option.
What's the 'Little Endian'? I don't know this option: Little Endian.
Could you explain that for me, please? Lay it all out for me, please..
Thank you for your kindness,
Jasmine

Correct way to export InDesign content to InCopy HELP!

I know this must be a bonehead question because I've done it right in the past, but now I'm stumped.
I have an INDD file with a main story and many graphics. I want to export the story to ICML so an editor can work on the document in InCopy.
So I select the story, and go Edit-->InCopy-->Export-->Selection. The icml gets created as expected. But now things diverge:
when I go to another machine with InCopy, I can open the ICML with InCopy, but I only see the story, not the whole layout. I want my editor to see editable text and uneditable graphics.
What obvious thing am I overlooking here?

Oh yes, now I remember!
You export the stories as described, but you must open the INDD file from InCopy not the ICML file.
Too much July 4 fun has clearly muddled my thinking.

Correct Way to Export 4:3 Format Video?

I'm making a video in 4:3 format (480 x 360), since that seems to be the size of videos on YouTube, and I want to put the finished video on YouTube. I'm using video screen captures in .mov format as the cuts for the video. All the .mov video files are 4:3.
I want to look at the video a few times with different edits before putting it on YouTube, so at this point, I just want to export it to the desktop.
There are a lot of export settings available in iMovie's Share->Export Using Quicktime dialog box, but I haven't yet found the right ones to export this video.
For example, I tried setting the export size to 480 x 360. The exported movie was the right dimensions, but blurry.
Then I tried just doing an export using Share->Export Movie (Medium size), but the top and bottom of the frame were cut off.
What are the best export settings for exporting 4:3 video?
Thanks very much in advance to all for any info.

Good grief! I just imported an .mov file, and IM cropped the video on import to 1.76:1 !
(Moments later...)
Okay, I just added another 480 x 360 clip to the same IM project, and this time IM recognized the aspect ratio, and added sidebars in the viewer. Switching out of IM and back yields anomalous results: sometimes IM shows the video at 1.76:1, cropped, and other times, it shows it uncropped with sidebars.
Are other people able to make a standard 480 x 360 YouTube video using IM?

Correct way to do SSO

Hi,
I am trying to include an JAVA system into ABAP system.
I have some doubts in here:
1> What is the correct way to export certificate from JAVA stack, using NWA(.der file) or using VIsual Admin(.crt file)?
When I import the certificate, exported using Visual Admin i.e. crt file, into ABAP stack, I dont see any acknowledgement symbol(red,yellow or green) beneath their entries in SSO2.
2> while adding the JAVA certificate in the ACL list of ABAP system, what do i put in system SID and client fileds, when the other system is pure JAVA?
what is the significance of including the client in there?
3> Is it important to create the certificate of a system itself in ABAP system and then add it into ACL list too?
Kindly help....

Hi Chilbul,
Kindly have a look into the below links.Hope these links will help you out.
http://help.sap.com/saphelp_nw70/helpdata/en/45/ec25370fdc3481e10000000a1553f6/content.htm
http://help.sap.com/saphelp_nw72/helpdata/en/74/642441cd87a12be10000000a1550b0/content.htm
http://sap10.blogspot.com/2009/07/enable-sap-single-sign-on-on-windows.html
Thanks & Regards
Ajitabh

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

What is the Text Book correct way to do a spot uv merging multiple applications and exporting from 1

I am unsuccesssfully finishing a project using Spot UV and about to start another. I want to start this one out the Text Book correct way. Here are the details.
I have logo's coming from Illustrator that I want to have a spot UV on
I have photos coming from photoshop that I want a spot UV on
I have a design element in In Design that I want a spot UV on
What is the Correct way to get everything into In Design have it output to a PDF that a printer could use and a second one that I could use for the Web that does not show the spot uv
A note is that the last project I followed all the tutorials on the web that say to use channels in photoshop to make my spot UV that in the end I think is causing me a lot of headaces right now.
Thanks in advance

Put the spot UV on its own layer in InDesign. Turn it off for the web version of the PDF.
Bob

Correct way to get a domain's SID ?

What is the correct way to get a domain's SID in Active Directory?
I need to get the domain SID in order to build several of the well known SIDs (by appending the specific RID onto the domain SID).
I've retrieved the objectSid value for the root domain object, which has a hex value of
010400000000000515000000c5ce3fba55678398b331e1ac
But this has a top level authority of 04, and I believe it should be 05.
A domain admin user's tokenGroups value for the Domain Admins group is:
010500000000000515000000c5ce3fba55678398b331e1ac00020000
which has an 05 top level authority.
Thanks,
-Lance

You may want to refer to the post titled "JNDI, Active Directory and SID's (Security Identifiers)" available at http://forum.java.sun.com/thread.jspa?threadID=585031&tstart=150 which also contains a reference on microsoft.com to the byte format of the SID.
The value you are mistakenly referring to (bytes 1 & 2) is not the top level authority, but rather it is the count of sub-authorities.
In this example, your domain sid has 4 sub-authorities whereas an object such as the well known group you have referred to; Domain Admins, has 5 sub-authorities.
You may also find it easier to use the string form of the SID, rather than the byte form.

Is it a correct way to get oracle skin?

I have created a custom skin by coping oracle’s css file (oracle-desktop-10_1_3_1_0-en-ie-6-windows-s) from the cache memory of the solution of SRDEMO application. Then registered that with a name (eg MySkin) in adf-faces-skin.xml and configured an application to use this new skin.
When I did the SRDEMO again with the new skin that I created, the pages look completely different even though I didn’t modify the original skin copied from the solution of SRDEMO.
1.     Why does it give different look and feel?
2.     Is it a correct way to create a custom skin?
3.     If the answer to the question is no, is there any way to get oracle skin?
Thank you

Hi Frank,
Thank you for your reply,
I don’t think that I messed up the configuration file. I have done the following.
1. Copied css file from cache and saved that file as css/myskin.css
2. Then I registered myskin.css in adf-faces-skins.xml as follows
<?xml version="1.0" encoding="ISO-8859-1"?>
<skins xmlns="http://xmlns.oracle.com/adf/view/faces/skin">
<skin>
<id>myskin.desktop</id>
<family>myskin</family>
<render-kit-id>oracle.adf.desktop</render-kit-id>
<style-sheet-name>css/myskin.css</style-sheet-name>
</skin>
</skins>
3. Then I configured SRDemo to use that skin in adf-faces-config.xml as follows.
<?xml version="1.0" encoding="windows-1252"?>
<adf-faces-config xmlns="http://xmlns.oracle.com/adf/view/faces/config">
<skin-family>myskin</skin-family>
</adf-faces-config>
Could you please let me know whether it is correct or not?

I have a macbook air late 2010 and keep getting a warning that my hard drive is full and to delete things so I purchased a external hard drive (1TB) but I'm just not sure what the correct way to transfer and store files to the external drive is. First MAC

I purchased a macbook air about 5 months ago and lately i keep recieving a warning that the hard drive or disk is full and that I will need to move items to trash in order to free up space on it. I purchased a external hard drive 1 TB but I'm very new to mac and ios and unsure as to how I'm suppose to transfer my files (video, pics, music etc.) from my mac over to the external hard drive in the correct way so I won't end up deleting them permenately or screwing anything up with my mac as far as the applications and programs being able to run. Am I supposed to just copy to the external hard drive and then move to and empty the trash? That's pretty much all I could come up with, but then what if i need or want to access that file again at a later time. Also, I have an i Phone and i pad so with i cloud it automatically syncs all my purcheses and if i delete something from itunes on my mac it deletes from my ipad.
I'd appreciate any kind of input i think im just a little lost here. I have to say i love my Mac and wouldn't trade it for anything (except maybe a macbook pro w/more memory)... Is there something I'm missing???

To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit.

I can't export uncompressed videos

I'm trying to export my videos as uncompressed AVIs so I can compress them on a seperate encoder, H.264, so I can put them on youtube and retain high quality videos. However, every time I try to do this, once it's finished exporting, I click the video to test it and I only get the audio. I doesn't matter how big or small the video is or what's on it, whenever I try to export an uncompressed video, I lose the actual video in the process.
So is there a way to fix this? Or if not, is there a way I can export the video without the enormous loss in quality I get whenever I do an AVI export? Thanks

sorry I wasn't being very specific. When I said uncompressed AVI, I mean the videos were orignially AVIs and I simply wanted them to be returned as the raw footage but in the reorganized, edited form I put them in. Like rearanging the videos without having to encode them again and deal with the loss of quality. Virtual Dub does this but it's harder to work with and more limited than premiere pro.
Still not specific enough. There are two ways of exporting an uncompressed AVI from Premiere Pro: you can set the Format as Uncompressed Microsoft AVI (which you shouldn't; that's only for AJA hardware), or you can set the Format to Microsoft AVI, and then select "None" from the codec dropdown. It's the latter than you want to do.
You might want to look into the Lagarith Lossless Video Codec or the Ut Video Codec Suite; both are free visually lossless codecs that will be smaller than uncompressed. They'll appear as codec options under Microsoft AVI. Lagarith installs both x86 and x64 (required for CS5) versions; for Ut, you need to install both the 32-bit and 64-bit packages.

Best Way to Export After Effects File and Save Transparency

Hi all-
A pretty simple question. I need to export a file from After Effects and keep the alpha channel so I can superimpose it on some video in FCE. What is the best way to export it?
I recall hearing people mention that the Animation Codec with "Millions of Colors+" is the best way to go about doing it, in which case I'd just have to render it within FCE. Is that correct? If so, are there any other settings I should tweak to get a high quality file that will work with FCE?
Thanks.

Hi -
Animation Millions+ will deliver an extremely high quality file with the alpha channel. You will need to render once in FC.
Hope this helps.

Premiere will not export Uncompressed or DV compressed video files

Working with CS4 with all current updates...
I have no issue exporting any other format (that I know of) including flv and wmv and m2v.
I am using PCs with Windows 7 Pro 64bit on a Desktop with 8GB RAM and Windows 7 Home Premium 64bit on a Laptop with 4GB RAM. I've had nothing but problems with CS4 since I cleanly installed my Desktop and purchased my Laptop. Adobe Premiere will not export DV compressed with video, only audio, and will not export uncompressed at all! I have a system with Vista Pro 64bit at work, and none of these problems are there.
I have uninstalled and reinstalled the whole suite (plus removed all preferences files and went in to the user profile and manually removed any traces) to no avail. As I am experiencing this same issue across two totally different systems, is it a known bug with Windows 7 64bit? Is there any way to fix the issue?

Sorry it's taken a bit to get back with you... I've been busy on another system. My assets are R3D files at 4k resolution under the Red 1080p preset. I have a Core2Duo with 8GB RAM, 2TB HDD, Running Windows 7 Pro 64bit and CS4 Production Premium. What other system specifics do you require?
I do have a Matrox RTX2 card; and did not uninstall and reinstall it when I uninstalled and reinstalled my CS4 software.
As for Export:

What is the correct way to format file paths and names in the structapp file?

I am trying to create a structured application to export fm files as xml, and probably read the xml back to fm.
In the structured application file (structapp), I need to specify the locations of the various files (DTD, read/write, template, etc). I would like to place these files on a shared server so others can use the same structapp file (that is, a cop of it). What is the correct way to format the file paths and names? Can folders folder names and file names have spaces in them? I tried the following, for example:
\\serverName\shareName\folder 1\folder 2\file name.dtd
I use the same format for the template file and the read/write rules file.
When I try to save an fm file to xml, FrameMaker says that it cannot read the DTD; however, the resulting xml file appears to be well-formed. The DOCTYPE element in the resulting xml is formatted with forward slashes and spaces replaced with %20.
I tried using forward slashes and replacing spaces with %20, but then I get an error about reading the read/write rules.
NOTE: I have another structured application to read xml into fm. This application does not have a DTD file. The template and read/write rules files are specified as above. Except for complaining about a lack of a DTD, the application works fine; it even applies an XSLT in the process. Again, when I DO add a DTD to this latter application, I get the same complaint about not being able to read the DTD.
I am using fully patched FrameMaker 9 in Windows XP.
Thanks,
Van

Hi Van,
The XML parser and FrameMaker are not the same thing. The Error Log says which component created which message. The XSL processor is another option that can throw messages. The "\\server\path\some.dtd" syntax in structapps.fm seems to be fine for some tools, as Internet Explorer with XML tools successfully finds the DTD which appears as "//server/path/some.dtd" in the XML. But apparently Xerxes, the XML parser bundled with FrameMaker, does not like this notation.
If you have a path with a drive letter, "H:\path\some.dtd", FrameMaker turns that into "file:///H:/path/some.dtd". It seems, Xerces would like to see "file:/" in front of absolute paths.
This is what I have in structapps.fm:
Template: \\server\path\projecttemplate.fm
DTD: some.dtd
Read/write rules: \\server\path\projectrules.txt
DOCTYPE: …
Entity locations
Entity search paths
1: \\server\path\
In the structapps.fm I have the DTD without path information. The resulting XML (without XSL postprocessing) then contains just the file name with a relative path back to the book folder (when saving a book as XML). It therefore requires the DTD to be available at this place. I handle this using an event script that fires for NotePreSaveXml and copies the DTD to the folder of the original document.
As I always use XSL postprocessing and using XSLT1 it is not possible to have the doctype-system as a parameter I have this in my XSL stylesheet:
<xsl:output doctype-system="some.dtd" />
For the resulting XML the DTD is expected to be in the same folder as the XML file. This is handled by the same event script as above, it therefore copies the DTD to the source and the target folder.
Bottom line: If you want/have to use UNC paths, you have to do some programming to work around a FrameMaker bug.
- Michael

Is there a way to export videos and retain geotag/time changes?

I'm in the process of exporting all my photos & videos from one Mac to another (I want to avoid migrating everything with the migration assistant...) through an external hard drive, which will also serve as my central photo/video location - this way I can lend it to my friends so they can import events to their Macs.
Anyway, I've made substantial changes to my photos and videos throughout the years, mostly around location geotagging and adjusting time and date info.
When exporting my events, I'm choosing the following settings:
Kind:              JPEG
JPEG Quality: High
Include:         Title and keywords (check)
                       Location information (check)
Size:               Full Size
File Name:     Use Filename
This has worked great for all my photos, as they retain all the date/time and geotag changes I've made.
However, this doesn't work for videos... a small file of a few hundred KB gets created for each video, but it's basically just an image of the first frame.
The only way to export my videos in full has been to change the "Kind" option above to "Original".
This works fine to create a file for each video in full, however none of the geotag or time/date changes are retained.
It looks like iPhoto is simply dumping a copy of the original video files without updating the timestamp or geotag info.
Is there a known way to do this with iPhoto? If not, how about other software?
Thanks!
-Marc

I see, thanks for the clarification.
Well that's my current problem actually, as I have a bunch of photos in my library that were imported at times when I did NOT have the "copy to library when importing" setting checked.
The original files (the full-size photos themselves) are all over the place, and some are on my external hard drive. So in order to consolidate everything, I'd like to export ALL the photos from my library to just *one* location.
Trouble is, I won't have enough space on the new MacBook to import everything into the internal SSD...
I noticed when playing around with various export settings that the size of the exported photos vary dramatically based on the "quality" setting, even if the "size" setting is always "full size".
It's even creating files that are larger than the originals if I select the "Maximum" quality setting! But if I select the next lower one, which is "High", the files end up being smaller than the originals by about 25-30%.
Do you know if there's a significant loss i quality when I pick "High" instead of "Maxiumum? (FYI the original files are all JPEG images, taken with various cameras from 2G iPhone and several point-and-shoots, to high-end digital SLR with glass lenses).

Correct way to export uncompressed to get a product aired on TV

Similar Messages

Maybe you are looking for