Correct Web Profile - KIOSK for Candidate Gateway

PeopleTools 8.50.08, Architecture - All Windows 2003, Oracle Enterprise 11.1.0.7
We were not aware that if an Applicant left their web browser session up past 20 minutes without any activity, the session would expire and redirect an Applicant to the actual PeopleSoft Signon Page, which at point the external applicant would be confused as what to do.
We need to have the Page Redirected back to the Careers Candidate Gateway Registration Page.
We tried to change the signon.html to include the CG URL and change the Web Profile Logout Page Value to the signon.html. This caused the session expiration to be redirected to the "Errors Has Occurred" html Page, which we didn't know which html page represented the" Error Has Occurred". Therefore, as a test we changed the entire section for Errors Pages html values to the signon.html and moved the signon.html file up under psftdocs. This change worked; however, what concerns me is changing all the Error Pages html values to the signon.html.
I don't know if this is really a problem for Candidate Gateway or not because the signin.html is not needed for external applicants, actually there isn't even a logout display on the page for an Applicant to logout gracefully.
Please advise if you thing the change to the Error Pages html values could represent an issue. We are trying to eliminate anything that would be confusing to an Applicant because actually if they did receive an error more than likely that individual applying for a job wouldn't know how to address it or who to contact for the error. So, we thought it was best to just redirect them back to the Careers Registration Page, which is the signon.html that we changed for all values representing the Error Pages in the Web Profile.
Does anyone know the correct way or have an example to configure the Web Profile Look & Feel Tab correctly?
Thanks in advance,

Similar Messages

How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?

How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?
Thank you.

dadanas wrote:
Hi Simcah, I have a similar problem. Have you found out any solution?
thanks, dan
You need to ask the printing service provider. Dealing with color totally depends on the printing process involved and of course the machines used.

Which is correct color profile for my macbook pro?

Hey there, I make DVD's for a living and I just recieved my new 17 inch macbook pro
I am about to install photoshop and I am curious.
Which color profile is correct for video work
as in, doesnt matter if it pleases me or "looks cool"
which is the acurate color profile that i can rely on for photoshop work for video (72 dpi etc etc)
is it COLOR LCD.
or Adobe RGB (1998)

Adobe RGB is not a monitor profile.
By default, your monitor uses the "Color LCD" profile. For accurate color, I suggest you purchase a calibration device and profile your monitor using 2.2 Gamma instead of the default 1.8.
As for Photoshop, if intend to export for web purposes, your working space should be sRGB.

Correct Lens Profile Not Available for Exported/Imported Image Files

Any help with this would be appreciated. I just noticed yesterday that when I have RAW (DNG) files in my LR5.2 library, I can select the correct lens profile to apply. When I take three of those files and merge them together in Photomatix Pro they come back as a single TIFF file. Now LR only has one lens profile available, and it is the wrong one.
This is happening with my Sony NEX-7 and Tamron 18-200mm f/3.5-6.3 XR DI-III VC. With the RAW files, I have a list of Tamron lenses from which to choose, and the correct one is available. For the merged TIFF file, however, only a single Tamron lens is available for selection, and it is not the lens I used.
If anyone has any ideas about this and can get me past it, I would greatly appreciate it.
Thanks,
~Steve

Here's my workflow for this particular situation: After importing the original RAW files, I apply lens correction using the correct profile. I export to another application that creates a new (TIFF) file that comes back into LR. Even though I already applied the correction to the original files, I can see that there is a difference in distortion between the original files and the new TIFF.
If your other application is opening the Raw file directly, it will likely be disregarding either most, or all, Lightroom adjustments even if they are somehow communicated to it. It will come down to whatever independent Raw support is built into the other application.
The other application would still need to (a) "understand" about Adobe lens profiles etc, (b) "know" where to find the appropriate Adobe profile on disk, and (c) be equipped to do the specific and proprietary processing that they refer to. The same applies for all the other Adobe-proprietary processing instructions. The only software I am aware of which can do all this reliably, in partnership with LR, is Adobe Camera Raw plus Photoshop.
I've trained myself that whenever a new file is created in an application outside of LR (including PS), I always re-apply lens correction upon first returning to LR. If I'm interpreting the above responses correctly, I shouldn't need to re-apply lens correction if I applied it to the original files. But again, it's not my observation that this is the case.
If your particular workflow is failing to reflect the first application of lens corrections (as well as perhaps, other specific adjustments) - then what returns to LR will not have undergone those kinds of corrections yet.
I'm also hearing that I may need to download a lens profile for this lens for a TIFF file format. I've never needed to do that before, so perhaps I'll give that a shot.
As I understand it, Photomatix can also accept converted TIFFs or JPGs from LR - instead of Raw fles. I am skeptical that you will realise any "clear water" advantage from sending Raws rather than TIFF (or even, high quality JPG in many cases) from LR into Photomatix - assuming the LR conversion is already optimising the images for the required purpose. You would be doing that step in an interactive environment rather than blindly via a generic converter. Such intermediate bitmaps are in my experience perfectly good candidates for HDR processing, or for exposure fusion (which I prefer - though I don't use Photomatix in particular).
Any workflow which causes LR to in effect Export suitable bitmaps that incorporate all current adjustments, will embody lens corrections as part of that. By the way, the workflow into Photoshop HDR is similarly done by way of converted bitmaps - though in that case it is ACR rather than LR which achieves these converted bitmaps, and into memory rather than into separately saved files, but the outcome is effectively the same.
The only downside is the "cleanup" is to get rid of intermediate TIFFS or JPGs afterwards. I usually put the completed "merged" image at the top of a "stack" containing the component exposures, and collapse the stack down. But the (disposable) intermediates don't get imported to LR, and by setting these to occur in a subfolder or with a distinctive name suffix, they are easily found and deleted in due course.
RP

What is the correct icc profile for jpegs extracted from DNGs?

Are they always sRGB, or always something else? do they need an icc-profile assigned for colors to be interpreted properly? is the correct profile available as metadata that could be read using exiftool or such?

Profile/color space can be anything - there is a DNG tag called "PreviewColorSpace" that allows for:
0 = Unknown
1 = Gray Gamma 2.2
2 = sRGB
3 = Adobe RGB
4 = ProPhoto RGB
Good practice would be to attach an ICC profile to the preview, but I don't think there's any requirement to do so.
Sandy

My profile pictures for my contacts somehow got switched on my iphone 4. I back it up to icloud and the correct pictures are on icloud. How can I fix?

My profile pictures for my contacts somehow got switched on my iphone 4. The pictures are correct on icloud where I sync. Does anyone know what the problem is and how I can fix?

Try resetting your iPhone. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
On a separate point, you may wish to consider updating your iPhone if you're still on iOS 5.0.1 as your post says.

Office Web Apps server for Lync DNS question

We are going to deploy an Office Web Apps server for our Lync 2013 clients, available internally and externally. We do not have a split-horizon DNS so it is not possible for wac.foo.com to have a different IP for internal vs. external clients. What is the
best setup for our scenario? It looks like we can only add one address in the Lync topology builder, so would it make sense to send everybody to the external wac.foo.com regardless of whether they are internal vs. external? Or is there a better option?
Thanks,
Matt

It might be easiest to use pin-point DNS. Create an internal zone called wac.foo.com with a blank A record that points to the internal IP address of the OWAS/WAC server. This way, wac.foo.com will resolve to the correct
internal address, but you're not setting up a split zone for the rest of foo.com.
This trick can come in handy for publishing other items without recreating the entire zone, it's a nice one to keep in your back pocket.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

How to create custom profile provider for fba user

Hello Every One
I have one SharePoint 2010 web application and on this FBA is configured. With help of code how can I get and set custom property for a user in
“aspnet_Profile” table in Database.
I have also try this config setting in web.config but not able to set or get profile property.
<anonymousIdentification enabled="true" />
<profile defaultProvider="AspNetSqlProfileProvider">
<providers>
<clear />

<add name="Demo_ProfileProvider" connectionStringName="fbaSQL" applicationName="/" type="System.Web.Profile.SqlProfileProvider,System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers>
<properties>
<add name="ThemeName" type="String" allowAnonymous="true" />
<add name="NoOfVisits" type="int" allowAnonymous="true" />
</properties>
</profile>
</system.web>
thanks
navaratan
Navaratan Sharma

Solution for this problem is
do following entry in web.config
<anonymousIdentification enabled="true" />
<profile enabled="true" defaultProvider="AspNetSqlProfileProvider">
<providers>
<clear />


<add name="AspNetSqlProfileProvider" connectionStringName="fbaSQL" applicationName="/" type="System.Web.Profile.SqlProfileProvider,System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers>
<properties>
<add name="ThemeName" type="String" allowAnonymous="true" />
<add name="NoOfVisits" type="int" allowAnonymous="true" />
</properties>
</profile>
</system.web>
code for get and set Profile property is
protected void OnClickbtn(object sender, EventArgs e)
try
ProfileBase profile = System.Web.Profile.ProfileBase.Create(HttpContext.Current.User.Identity.Name);
profile["ThemeName"] = txtTheme.Text;
profile["NoOfVisits"] = int.Parse( txtNoOfVisits.Text);
profile.Save();
catch (Exception ex)
protected void OnClickbtnGet(object sender, EventArgs e)
try
ProfileInfoCollection profiles = ProfileManager.GetAllProfiles(ProfileAuthenticationOption.All);
foreach (ProfileInfo profileInfo in profiles)
ProfileBase profile = ProfileBase.Create(profileInfo.UserName);
// add condition for user
txtTheme.Text = (string)profile.GetPropertyValue("ThemeName");
txtNoOfVisits.Text = Convert.ToString((int)profile.GetPropertyValue("NoOfVisits"));
SPUser user = SPContext.Current.Web.CurrentUser;
catch (Exception ex)
thanks
navaratan
Navaratan Sharma

WEB ADI INTEGRATOR FOR Bill of Material

I am developing a WEB ADI integrator for Bill of material upload. The integrator will populate the data in a temporary table, validate it & write the error messages back to the table . On succesful validation the data will be sent to interface tables & then to base table.
The integrator uses a procedure & sends data to the procedure. Procedure then loads data in temporary table & does the rest of work.
To do this i need to know the following thinngs:
1. How i can track the line no of Excel?
2. How do I know that all data are loaded in temporaray table because the validation & rest of work will be done once all the rows of excel are transfered to temporaray table. i.e. How do i determine the End of File in Excel?
3. How do i write error messages from the table to the excel in web adi?
Any help will be appreciated. Please send me the sample scripts & web adi developer guide at [email protected],[email protected]

If you check the XML that Web ADI generates to upload a document you will note that each row gets a row number. It would be a matter of being able to keep track of that number in your table so that when you are reporting the error back you can include that number in the message so the code in the Excel spreadsheet can assign it to the correct row.
I would suggest trying to use even some of the basic validation mechanisms provided within Web ADI, as these will automatically return the error messages for bad data to the correct row in the spreadsheet.
Web ADI will take the uploaded data, perform any validation check defined within meta-data then push the data to your Interface table. There are plenty of examples in th shipped code of product teams then using the Import phase of the upload to perform additional checks and then push the data further. But if you can utilize the existing Web ADI functionality. The data never ends up in the table in the first place to require any clean up on your part.

Correct Color Profile in Keynote '09 (or '08)

I have been tasked with putting together a photography presentation for six photographers. The presentation will be projected (with two Epson projectors and six color monitors) in Keynote ’09 (and ’08) for a one-night photographer’s gallery exhibit. One of the concerns raised by one of the photographers who has used Keynote (not sure the version, but probably ’08 or earlier) is that there is a "*color shift*" that occurs from the original saved image. All images are exported from (Apple) Aperture, (Adobe) Lightroom, and (Adobe) PhotoShop CS3-CS5 using the Adobe RGB 1998 Color Profile.
All photographers (including myself) are working with Aperture, Lightroom, or PhotoShop and are saving their final images with the Adobe RGB (1998) ICC color profile.
Is there a way to ensure “correct” color profiles are used in Keynote ’09 (and ’08)? If so, how is this done?
Any help would be appreciated.

Welcome to the discussions, anthonysan.
There isn't a way within the program to do it, however it IS possible I think. I'll give you some tips to start down that path, and, if you have any questions, just post back here.
First, go to Keynote preferences and, under General Preferences, choose "Save new documents as packages". Next, create a new document (white theme), change the Master to blank, and place three rectangles on the first slide, each with an EASY to define color. (By "easy to define" I mean pick colors that you would be able to discern numerically, for example 100% red, 100% black, 100% green, etc.) Finally, double click inside each shape and add some unique text. I'm using "firstone", "secondone", "thirdone".
Now, save that document, then right-click (two-finger-click, control-click) on it's icon in the Finder. You should see an option to Show Package Contents. Select that and you should then see a few folders and some files. You're looking for index.apxl.zip. Double click that one to unzip it, then put the .zipped version in the trash (Keynote can read either just as well). Now, you should have an index.apxl file.
When you double-click the index.apxl file, you'll have to choose to open it with TextEdit, then search for your unique text "firstone".
Things get more detailed from this point, but it does lead to a potential solution. Let me know if you're following so far, and we can look at the mysteries within they Keynote file

Need correct color profile settings in windows....????

Help! Just replaced the motherboard and now all the color profiles in photoshop are wrong.... Does anyone know the correct settings to choose in windows or to choose for the graphics card... it's an AMD Phenom II. I open Adobe Bridge and immediately the previews lose their color which tells me this is not the correct profile the computer is telling photoshop... can anyone help, please????

operating system is windows 7 and the monitor is profiled correctly.... and these are raw images, so no, cannot view in another program.... and they look the same in ps as in bridge. however, i called adobe and they told me it sounds like a graphics card issue, so i'm going to amd's website to update and reinstall drivers.... not sure what else to do....
From: rogleale <[email protected]>
To: Kelly Ferreira <[email protected]>
Sent: Friday, June 10, 2011 11:21 AM
Subject: Need correct color profile settings in windows....????
Not enugh information. Which OS? Is your monitor profiled? Can you see your images in any other program, eg Windows Picture Viewer?
What happens if you open your images in PS instead of Bridge?
Roger

A Correct IP Profile, or Capped?

Hello all,
This is a little bit different to some messages that I have read on this subject, in that following a network upgrade on my local exchange last week my download/upload speeds have greatly improved. Having said that, and having been a BTInternet customer for some years, I am wondering whether my service is capped in any way, and how I can tell whether I have the correct IP Profiles.
My local exchange is the Ambergate exchange in Derbyshire, and as the Crow flies I am about 2+ miles away, although I am unaware which part of Ambergate the exchange is in.
Today is 5 days since the upgrade took place, and in fairness I noticed an improvement almost immediately. since then I have run several speedtests, which, by and large have maintained the improved settings. I have also tried to keep a record of the ASDL Settings from my Home Hub 2.0. Hoping it helps, I have shown these below.
As at: 21/10/11 - 11.00pm
ADSL line status
Connection Information
Line state   Connected
Connection time   1 days, 09:53:52
Downstream   3,747 Kbps
Upstream   864 Kbps
ADSL Settings
VPI/VCI   0/38
Type   PPPoA
Modulation   G.992.5 Annex A
Latency type   Interleaved
Noise margin (Down/Up)   5.8 dB / 11.0 dB
Line attenuation (Down/Up)   56.1 dB / 35.0 dB
Output power (Down/Up)   4.8 dBm / 1.3 dBm
Loss of Framing (Local/Remote)   0 / 0
Loss of Signal (Local/Remote)   0 / 0
Loss of Power (Local/Remote)   0 / 0
FEC Errors (Down/Up)   30096 / 0
CRC Errors (Down/Up)   893 / 0
HEC Errors (Down/Up)   8258 / 0
Error Seconds (Local/Remote)   500 / 0
As at 22/10/11 - 21.32
ADSL line status
Connection Information
Line state   Connected
Connection time   0 days, 16:15:35
Downstream   4,032 Kbps
Upstream   1,024 Kbps
ADSL Settings
VPI/VCI   0/38
Type   PPPoA
Modulation   G.992.5 Annex A
Latency type   Fast
Noise margin (Down/Up)   5.0 dB / 5.5 dB
Line attenuation (Down/Up)   55.1 dB / 35.0 dB
Output power (Down/Up)   5.9 dBm / 1.5 dBm
Loss of Framing (Local/Remote)   0 / 0
Loss of Signal (Local/Remote)   0 / 0
Loss of Power (Local/Remote)   0 / 0
FEC Errors (Down/Up)   0 / 0
CRC Errors (Down/Up)   20218 / 0
HEC Errors (Down/Up)   12759 / 0
Error Seconds (Local/Remote)   5802 / 0
As at 24/10/11 - 11.30 (Wireless)
ADSL line status
Connection Information
Line state   Connected
Connection time   2 days, 06:10:56
Downstream   4,032 Kbps
Upstream   1,024 Kbps
ADSL Settings
VPI/VCI   0/38
Type   PPPoA
Modulation   G.992.5 Annex A
Latency type   Fast
Noise margin (Down/Up)   6.9 dB / 5.5 dB
Line attenuation (Down/Up)   55.1 dB / 35.0 dB
Output power (Down/Up)   6.6 dBm / 1.5 dBm
Loss of Framing (Local/Remote)   0 / 0
Loss of Signal (Local/Remote)   0 / 0
Loss of Power (Local/Remote)   0 / 0
FEC Errors (Down/Up)   0 / 0
CRC Errors (Down/Up)   51421 / 21
HEC Errors (Down/Up)   47110 / 0
Error Seconds (Local/Remote)   19247 / 13
As at 25/10/11 - 18:50 (Ethernet)
ADSL line status
Connection Information
Line state   Connected
Connection time   3 days, 13:29:09
Downstream   4,032 Kbps
Upstream   1,024 Kbps
ADSL Settings
VPI/VCI   0/38
Type   PPPoA
Modulation   G.992.5 Annex A
Latency type   Fast
Noise margin (Down/Up)   5.2 dB / 5.1 dB
Line attenuation (Down/Up)   55.1 dB / 35.0 dB
Output power (Down/Up)   6.0 dBm / 1.5 dBm
Loss of Framing (Local/Remote)   0 / 0
Loss of Signal (Local/Remote)   0 / 0
Loss of Power (Local/Remote)   0 / 0
FEC Errors (Down/Up)   0 / 0
CRC Errors (Down/Up)   41971 / 7
HEC Errors (Down/Up)   1660028 / 0
Error Seconds (Local/Remote)   45574 / 7
As you will see they show the settings at certain times on the 21st, 22nd, 24th & 25th of October. Can someone who knows how to interprate these tell me whether it seems likely that my service, as improved as it is, is capped?
If I need to give you any further information please let me know.
I am particularly interested as my use includes uploading recorded videos (church sermons), each about 35 minutes in length. I understand that the times will be affected by the settings I use to encode the videos, so the answer to my question is obviously important to me.
Since the upgrade I have not phoned support at all, as I just wanted to garner the views/opinions of such experienced users (or the mods) that regularly use this forum.
I will truly appreciate any feedback,
Regards,
Alan

Back again - I was able to do the tests a little quicker than anticipated, so here they are, tonight's ADSL test (plus yesterday's for comparison), plus tonight's BT Speedtester results. They seem to confirm that there is a problem somewhere:
As at 25/10/11 - 18:50 (Ethernet)
ADSL line status
Connection Information
Line state   Connected
Connection time   3 days, 13:29:09
Downstream   4,032 Kbps
Upstream   1,024 Kbps
ADSL Settings
VPI/VCI   0/38
Type   PPPoA
Modulation   G.992.5 Annex A
Latency type   Fast
Noise margin (Down/Up)   5.2 dB / 5.1 dB
Line attenuation (Down/Up)   55.1 dB / 35.0 dB
Output power (Down/Up)   6.0 dBm / 1.5 dBm
Loss of Framing (Local/Remote)   0 / 0
Loss of Signal (Local/Remote)   0 / 0
Loss of Power (Local/Remote)   0 / 0
FEC Errors (Down/Up)   0 / 0
CRC Errors (Down/Up)   41971 / 7
HEC Errors (Down/Up)   1660028 / 0
Error Seconds (Local/Remote)   45574 / 7
As at 26/10/11 - 20:44
ADSL line status
Connection Information
Line state   Connected
Connection time   4 days, 15:21:52
Downstream   4,032 Kbps
Upstream   1,024 Kbps
ADSL Settings
VPI/VCI   0/38
Type   PPPoA
Modulation   G.992.5 Annex A
Latency type   Fast
Noise margin (Down/Up)   3.2 dB / 5.4 dB
Line attenuation (Down/Up)   55.1 dB / 35.0 dB
Output power (Down/Up)   5.4 dBm / 1.5 dBm
Loss of Framing (Local/Remote)   0 / 0
Loss of Signal (Local/Remote)   0 / 0
Loss of Power (Local/Remote)   0 / 0
FEC Errors (Down/Up)   0 / 0
CRC Errors (Down/Up)   4748 / 0
HEC Errors (Down/Up)   3200865 / 0
Error Seconds (Local/Remote)   64742 / 0
BT Speedtest Results (same date as above)
Download speed achieved during the test was - 6 Kbps
For your connection, the acceptable range of speeds is 1200-4000 Kbps.
IP Profile for your line is - 3556 Kbps
Note: An Upstream test was not conducted on this line due to a technical issue. If your concern is related to upstream performance then please retry
the performance test again in 1 hours time.
I await any comments with interest.
Regards,
Alan

Bex Query Variable error in Webi and Crystal for Enterprise

Hi,
We just upgrade to BOBJ 4.1 SP2 and BW7.4 SP5
I am creating a webi report based on a BEx query. There is Variable on Period/Fiscal Year from BEX side(Mandatory prompt) when I try to create a Webi or Cyrstal for Enterprise report the below error pops up. Other Bex queries work correctly. Can it be the values in the variable the following values exist when execute from Bex i.e. 001.2012; Period 2013
Is the SAP Note : 1611185 relevant for 4.1 SP2
Error:
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: Termination message sent
ABEND DBMAN (257): SQL Error: INTERNAL_ERROR
MSGV1: INTERNAL_ERROR
Is this True for BOBj4.1 SP2?
http://scn.sap.com/thread/3362312
Selection range variables are not fully supported in Crystal Reports for Enterprise.
Message was edited by: Tienie Nothnagel

Henry Banks wrote:
> I know what you mean. In BEx, it's automatic: the default values are pre-selected at runtime, based on user authorizations
>
> In WebI, user needs to do a 3-click workflow to select the authorized values from the prompt dialog. This can be broken down into 3 phases:
>
> (a) initialize prompt u2013 empty pane.
> (b) refresh list of values,
> (c) select response values.
Thanks Henry! I was looking for this confirmation that it is a limitation of Webi and I'm not missing something.
Henry Banks wrote:
> ---> make this BEx variable u2018mandatoryu2019 u2013 this will trigger an automatic refresh mechanism on the list of values, and show it to the user. This will eliminate steps (a) & (b).
>
It is not possible to set Authorization variables as mandatory. They are set to "optional" and cannot be changed (BEx limitation).
Henry Banks wrote:
> Unfortunately, BEx and WebI are not like-for-like replacement tools. Not all u2018normalu2019 BW features integrate natively into BObj.
> So this will also have to be an excercise in positioning a new product to your onboarding users. (i.e. just click the button)
> Regards,
> H
I understand that. Thanks for your suggestion.

Web Developer Needed for a Hawaii Real Estate Agency

Web Developer Needed for a Hawaii Real Estate Agency
(Telecommuting OK. No Relocation)
We are an innovative, technology oriented, real estate agency
searching for an excellent web developer to continue to improve and
grow our 40 agents business. This is a full-time telecommuting
position (although we would love for you to physically be in our
office in Kailua-Kona, Hawaii, we do not pay for relocation
expenses)
The ideal candidate should possess the following skills:
Required skills:
* 5+ years experience in building web applications
* Mastery of ColdFusion MX 6/7 (at least 2 years working
intensively with Coldfusion)
* SQL Server 2000 - Building normalized and optimized
databases, Creating Data Transformation Service packages (DTS),
Import/Export Data, Stored Procedures
* Mastery of: XML, JavaScript, CSS, HTML, Dreamweaver (or
other IDE), Photoshop, some Flash
* Experience with Fusebox 4 methodology
* Excellent communication skills
* Salary commensurate with experience
Additional preferred skills:
* Goldmine 6.7 (a big plus)
* Crystal Reports (or equivalent reporting tool)
* Web (graphic) design skills
Primary Duties:
* Maintain and improve existing Coldfusion/Fusebox 4 web
applications
* Design and build new real estate related tools and
applications
* Create an application to process and consolidate multiple
MLS feeds in various formats into a single database.
* Integrate between websites and CRM system
* Create automation processes in various areas
* Administer Goldmine
* Write procedures and documentations
Interested candidates should email their resume to
[email protected] Only serious candidates please.

Hi,
Is this still available? Current location Captain Cook -
S.Kona. 8 yrs CF/SQL etc.
Thanks

External Web Service setting for Supplier Registration ROS to EBP

Dear guys,
We are working on Supplier registration scenario where potential supplier are accepted in ROS client and then transferred to EBP via Suppliers Directory.
For this we have defined External Web Service in both clients ROS and EBP
Can anyone tell me what are the Parameters and setting required to define External Web Service?
We have created New Web Service with following parameters in both the clients ROS and EBP.
Web Service ID                     : ROS
Description                          : Suppliers Directory in ROS Client
Bus. Type of Web Service               : Lost of Vendors
Display Partners Data Again in Vendor List      : X
Vendor Root Node                     : 50000620
Use Error Log                         : X
Use HTTP GET to call Web Service          : <blank>
Codepage of Service                    : <blank>
Technical Type of Service               : <blank>
Logical system                    : SRDCLNT300 (EBP Logical system)
Path for Symbol for Service               : <blank>
Define Standard Call Structure with following Parameters
1        <blank>     http://erpdevsrci.egat.co.th:8010/sap/bc/bsp/sap/ros_prescreen/main.do
          URL
2        HOOK_URL      <blank>     Return URL
Please correct us.
With this setting system does display the Suppliers Directory option in Supplier Screening (Suppliers Directory in ROS Client), however after selecting suppliers directory instead of listing the accepted supplier to transfer to EBP, system displays the same suppliers Prescreen again with no option to transfer accepted supplier to EBP client.
I think I have not set the External Web services setting properly ..
So can anyone send me the correct web service parameter setting?
Regards,
Sandeep parab

Ramki/disha,
I have defined following setting in external web services in EBP client
Web Service ID    : ROS
Description: External Web Service in EBP
Bus Type of a Web service : List of Vendors
Display Partner Data again in Vendor List : X
Vendor Root Node : 50000620 (this is Vensor Root node in EBP client)
Use Error Log : X
Use HTTP GET to call Web Service : <blank>
Codepage of Service: <blank>
Techinical type of Service : <Blank>
Logical system : SRDCLNT310 (this is ROs client from there supplier will be transfered)
Path for symbol for service : <blank>
Standard Call Structure Parameter setting as follows
1. <blank> http://....ros_prescreen/main.do URL
2. sap-client 310 fixed_value
3. sap-username dineshp fixed_value
4. sap-password GAJANAN fixed_value
5. HOOK_URL <blank> Return_URL
6. ~OkCode ADDI fixed_value
7. ~target top fixedvalue
8. ~caller CTLG fixed_value
Also defined ROS external web service as default CAT attribute in the organization setting.
Maintained ROS client in SAP_BBP_STAL_STRAT_PURCHASER role.
Created New Users in ROS as well as EBP and tried the scenario. still it failed to transfer the supplier from Ros to EBP.
Where can we debug the error message?
Regards,
Sandeep

Correct Web Profile - KIOSK for Candidate Gateway

Similar Messages

Maybe you are looking for