Correcting a 'Schoolboy error??'

i have a hour worth of rushes with incorrect white balancing, does anyone have a miracle cures, weve got tungsten walls instead of white...?
ive heard the 3-way correction could help me, just looking for somebody who may have tackled this type of issue in the past successfully.
thank you

The 3 way colour correction filter is a powerful tool that can take time to master. But play with it, the basics are pretty simple and depending on your requirements, you might get satisfactory results by simply selecting the" Whites" eyedropper tool and clicking on a part of the scene that should be white.
For more detailed instructions... check out that manual!
Good Luck
rh

Similar Messages

  • Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

    Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).  I have my iPod plugged into my computer via USB port.  What am I doing wrong?

    i have the only account on my laptop so have checked and am the account administrator
    i run windows 7 home premium
    I have the same problem and
    have followed the link uninstalling in the correct order,
    then restarted as per instructions,
    went to Apple to download itunes,
    hit download now,
    Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
    did not get a save instead of run prompt
    Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
    If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
    i can only click run as administrator from right clicking the shortcut on my desktop screen
    If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
    sick of doing this
    at least 7 or 8 times i have re installed itunes to no avail
    troubleshooting no better
    please help. pulling my hair out at this stage
    it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
    not working since i clicked yes
    also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
    really dont want to have to restore factory settings

  • Suddenly iTunes doesn´t work. Trying to reinstall I get error messages: "R6034 attempt to load C runtime library incorrectly", "Cannot start Apple Mobile device", "Not installed correctly Error7 (Windows error 1114)". What to do?

    Suddenly iTunes didn´t function. Trying to reinstall Ifirst tried to delete the program and all iTunes files, but ITunes Helper could not be deleted. After installation (with anti virus disconnected) the following error messages come up: "MS Visual C++ Runtime Library R6034 - attempt to load C routine library incorrectly", "Cannot start Apple Mobile Device", "Not correctly installed. Error 7 (windows error 1114" What to do?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • TS3694 Trying to install new version of I tunes. Get the following error msgs:Itunes not installed correctly reinstall (Windows error 126), and missing file MSVCR80.DLL?

    Trying to upgrade Itunes get the following error msgs: Itunes not installed correctly reinstall (Windows error 126) and missing file MSVCR80.DLL?

    Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
    (98972)

  • HT1751 my itunes was not installed correctly. Reinstall error 7? How do I get it back

    My itunes was not installed correctly. Reinstall error 7? How do I get it back?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Installed CS6 all but Illustrator installed correctly, I received error DF024, DW063, and DW050, how can I install Illustrator and fix these errors?

    installed CS6 all but Illustrator installed correctly, I received error DF024, DW063, and DW050, how can I install Illustrator and fix these errors?
    this is the log error file I get:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 0 warning(s)
    ----------- Payload: {AAF0D225-F129-40F2-916E-12E28DBD19ED} Adobe Illustrator CS6 Core 16.0.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "/Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Frameworks/AdobeCrashReporter.framework/AdobeCrashReporter" (Seq 1649)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1649)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050: - Adobe Illustrator CS6 Core_AdobeIllustrator16en_USLanguagePack: Install failed
    ERROR: DW050: - Adobe Illustrator CS6 Core: Failed due to Language Pack installation failure

    hold down shift-cmd-alt while starting ai.  if done correctly, you'll see a preferences reset prompt.
    if that fails, uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • How do I correct an "undetermined error" when trying to reload Photoshop CS4 remotely on a Mac Air?

    How do I correct an "undetermined error" when trying to reload Photoshop CS4 remotely on a Mac Air?

    Hi dsalacain,
    Are you trying to run the setup from network location. If yes please copy the installation file to the desktop of the Mac and try installing again.
    Regards,
    Romit Sinha

  • Error highlighted no lines of code to be corrected just the error code

    When I run the macro I get this error:
    "The attempted operation failed.  An object could not be found."
    The error highlighted no lines of code to be corrected just the error code.
    Dim OLapp As New Outlook.Application
    Dim OLns As Outlook.NameSpace
    Dim Inbox As Outlook.MAPIFolder
    Dim Bills As Outlook.MAPIFolder
    Set OLns = OLapp.GetNamespace("MAPI")
    Set PersonalFolder = OLns.GetDefaultFolder(olPublicFoldersAllPublicFolders)
    Set Inbox = OLns.GetDefaultFolder(olFolderInbox)
    Set BillsFolder = PersonalFolder.Folders("Bills")
    If Inbox.Items.Count = 0 Then Exit Sub
    For iLoop = Inbox.Items.Count To 1 Step -1
    Set obj = Inbox.Items(iLoop)
    If obj.SenderEmailAddress = "[email protected]" Then obj.Move BillsFolder
    Set obj = Nothing
    Next iLoop
    Set BillsFolder = Nothing
    Set PersonalFolder = Nothing
    Set Inbox = Nothing
    Set OLns = Nothing

    Are you sure a folder named Bills exists in the PF store?
    Dmitry Streblechenko (MVP)
    http://www.dimastr.com/redemption
    Redemption - what the Outlook
    Object Model should have been
    Version 5.5 is now available!

  • Unable to correct this runtime error

    hi i am unable to correct this STACKOVERFLOW ERROR
    plz help
    i m learning to make small java programs.
    here's the code
    import java.awt.*;
    import java.awt.event.*;
    import java.applet.*;
    import java.io.*;
    import javax.swing.*;
         class cwdm1 extends JFrame // implements ActionListener
              public void show()
                             Container cp = getContentPane();
                             cp.setLayout(new FlowLayout());
                             setLocation(400,200);
                             JButton submit = new JButton("submit");
                             JLabel lusername = new JLabel("UserName");
                             JLabel lpassword = new JLabel("Password");
                             JTextField tusername = new JTextField(10);
                             JPasswordField ppassword = new JPasswordField('#');
                             cwdm1 myframe1 = new cwdm1();
                             myframe1.setSize(300,300);
                             myframe1.setVisible(true);
                             cp.add(submit);
                             cp.add(lusername);
                             cp.add(lpassword);
                             cp.add(tusername);
                             cp.add(ppassword);
                             submit.setBounds(80,135,100,25);
                             lusername.setBounds(20,70,100,25);
                             lpassword.setBounds(20,100,100,25);
                             tusername.setBounds(150,70,100,25);
                             ppassword.setBounds(150,100,100,25);
              public class cwdmmain
                        public static void main(String args[])
                                  cwdm1 obj1 = new cwdm1();
                                  obj1.show();
              }

    Make this modfication:
    public void show()
    (new IOException()).printStackTrace();to see:
    java.io.IOException
         at cwdm1.show(cwdm1.java:15)
         at cwdm1.main(cwdm1.java:48)
    java.io.IOException
         at cwdm1.show(cwdm1.java:15)
         at java.awt.Component.show(Unknown Source)
         at java.awt.Component.setVisible(Unknown Source)
         at cwdm1.show(cwdm1.java:31)
         at cwdm1.main(cwdm1.java:48)
    java.io.IOException
         at cwdm1.show(cwdm1.java:15)
         at java.awt.Component.show(Unknown Source)
         at java.awt.Component.setVisible(Unknown Source)
         at cwdm1.show(cwdm1.java:31)
         at java.awt.Component.show(Unknown Source)
         at java.awt.Component.setVisible(Unknown Source)
         at cwdm1.show(cwdm1.java:31)
         at cwdm1.main(cwdm1.java:48)
    ... and so on unitl the overflow

  • I can no longer access a password protected Numbers file with the correct password. Error message only says the file "cannot be opened."

    I'm using Numbers version 3.2.2.
    Suddenly I cannot access my password protected Numbers file with the correct password. I have the correct password written down so I know I haven't made a mistake.
    The response box that pops up says that the file cannot be opened. There are no other options for me to choose from.

    Also, I tried to open it through an older version of Numbers but it sent this error message.

  • Bluez not working correctly? Configuration error?

    I seem to be having a difficult problem in relation to either the bluetooth stack (bluez) or maybe even dbus.
    I am using the bluetooth on my Lenovo Thinkpad T500 to connect to my Windows 7 PC (which has a bluetooth dongle) so I can transfer files between each other.  I have a KDE desktop, and I am using Bluedevil as my frontend.  I can pair with my desktop just fine.  Also, at the same time, I am using a bluetooth mouse for my laptop.
    First thing I noticed was that I can't initiate a transfer on the Windows 7 side.  The only services that are said to he handled are 'Headset Audio Gateway', 'Remote Control', and 'Remotely Controllable Device'.  I know for a fact you need something called OBEX in that service list to transfer files.
    On the Arch Linux side of things, I can initiate a transfer normally, but it never completes.  Right after clicking the send button, it immediately says that the file has transferred successfully, even before Windows 7 prompts me to accept the transfer.  No file is actually transferred.  Also, I noticed that after this 'successful' transfer, my mouse stops working.  I am not able to pair up anything until I reset the laptop.
    For testing purposes, I booted up a Kubuntu 12.04 livecd.  When pairing using Kubuntu, Windows detects all the services correctly, including OBEX and a few other ones.  Windows 7 is able to send a file to Kubuntu, and vice versa.  So this leads me to believe this has something to do with Arch Linux......I just need some help with pinpointing what it might be, so I can create a bug report of it.
    Last edited by Kirby (2012-08-04 06:37:51)

    'spdtool browse local' confirms that the SDP service record for Obex isn't being registered correctly.  Coincidentally, these are the services that Windows 7 only detects working on my laptop bluetooth, also.  This is right after a reboot:
    [root@metanite-laptop kurbster]# sdptool browse local
    Browsing FF:FF:FF:00:00:00 ...
    Service Name: Headset Audio Gateway
    Service RecHandle: 0x10000
    Service Class ID List:
    "Headset Audio Gateway" (0x1112)
    "Generic Audio" (0x1203)
    Protocol Descriptor List:
    "L2CAP" (0x0100)
    "RFCOMM" (0x0003)
    Channel: 12
    Profile Descriptor List:
    "Headset" (0x1108)
    Version: 0x0102
    Service Name: Hands-Free Audio Gateway
    Service RecHandle: 0x10001
    Service Class ID List:
    "Handsfree Audio Gateway" (0x111f)
    "Generic Audio" (0x1203)
    Protocol Descriptor List:
    "L2CAP" (0x0100)
    "RFCOMM" (0x0003)
    Channel: 13
    Profile Descriptor List:
    "Handsfree" (0x111e)
    Version: 0x0105
    Service Name: AVRCP TG
    Service RecHandle: 0x10002
    Service Class ID List:
    "AV Remote Target" (0x110c)
    Protocol Descriptor List:
    "L2CAP" (0x0100)
    PSM: 23
    "AVCTP" (0x0017)
    uint16: 0x103
    Profile Descriptor List:
    "AV Remote" (0x110e)
    Version: 0x0104
    Service Name: AVRCP CT
    Service RecHandle: 0x10003
    Service Class ID List:
    "AV Remote" (0x110e)
    Protocol Descriptor List:
    "L2CAP" (0x0100)
    PSM: 23
    "AVCTP" (0x0017)
    uint16: 0x103
    Profile Descriptor List:
    "AV Remote" (0x110e)
    Version: 0x0100
    and here's what I get when I run bluetoothd not as a daemon:
    [root@metanite-laptop bluetooth]# bluetoothd -n -d
    bluetoothd[1012]: Bluetooth daemon 4.101
    bluetoothd[1012]: src/main.c:parse_config() parsing main.conf
    bluetoothd[1012]: src/main.c:parse_config() discovto=0
    bluetoothd[1012]: src/main.c:parse_config() pairto=0
    bluetoothd[1012]: src/main.c:parse_config() pageto=8192
    bluetoothd[1012]: src/main.c:parse_config() auto_to=60
    bluetoothd[1012]: src/main.c:parse_config() name=%h-%d
    bluetoothd[1012]: src/main.c:parse_config() class=0x400100
    bluetoothd[1012]: src/main.c:parse_config() Key file does not have key 'DeviceID'
    bluetoothd[1012]: Starting SDP server
    bluetoothd[1012]: src/plugin.c:plugin_init() Loading builtin plugins
    bluetoothd[1012]: src/plugin.c:add_plugin() Loading audio plugin
    bluetoothd[1012]: src/plugin.c:add_plugin() Loading input plugin
    bluetoothd[1012]: src/plugin.c:add_plugin() Loading serial plugin
    bluetoothd[1012]: src/plugin.c:add_plugin() Loading network plugin
    bluetoothd[1012]: src/plugin.c:add_plugin() Loading service plugin
    bluetoothd[1012]: src/plugin.c:add_plugin() Loading hciops plugin
    bluetoothd[1012]: src/plugin.c:add_plugin() Loading mgmtops plugin
    bluetoothd[1012]: src/plugin.c:add_plugin() Loading formfactor plugin
    bluetoothd[1012]: src/plugin.c:add_plugin() Loading storage plugin
    bluetoothd[1012]: src/plugin.c:add_plugin() Loading adaptername plugin
    bluetoothd[1012]: src/plugin.c:add_plugin() Loading wiimote plugin
    bluetoothd[1012]: src/plugin.c:plugin_init() Loading plugins /usr/lib/bluetooth/plugins
    bluetoothd[1012]: plugins/service.c:register_interface() path /org/bluez/1012/any
    bluetoothd[1012]: plugins/service.c:register_interface() Registered interface org.bluez.Service on path /org/bluez/1012/any
    bluetoothd[1012]: network/manager.c:read_config() /etc/bluetooth/network.conf: Key file does not have key 'DisableSecurity'
    bluetoothd[1012]: network/manager.c:read_config() Config options: Security=true
    bluetoothd[1012]: input/manager.c:input_manager_init() input.conf: Key file does not have key 'IdleTimeout'
    bluetoothd[1012]: audio/manager.c:audio_manager_init() audio.conf: Key file does not have key 'AutoConnect'
    bluetoothd[1012]: plugins/hciops.c:hciops_init()
    bluetoothd[1012]: Bluetooth Management interface initialized
    bluetoothd[1012]: src/main.c:main() Entering main loop
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:read_version_complete() version 1 revision 0
    bluetoothd[1012]: src/rfkill.c:rfkill_event() RFKILL event idx 0 type 2 op 0 soft 0 hard 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 13 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:add_controller() Added controller 0
    bluetoothd[1012]: src/rfkill.c:rfkill_event() RFKILL event idx 1 type 2 op 0 soft 0 hard 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 289 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:read_info_complete() hci0 addr 00:26:5E:BA:00:18 version 4 manufacturer 15 class 0x400100
    bluetoothd[1012]: plugins/mgmtops.c:read_info_complete() hci0 settings
    bluetoothd[1012]: plugins/mgmtops.c:read_info_complete() hci0 name metanite-laptop-0
    bluetoothd[1012]: plugins/mgmtops.c:read_info_complete() hci0 short name
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_remove_uuid() index 0
    bluetoothd[1012]: src/adapter.c:btd_adapter_ref() 0x7ff8aa94a090: ref=1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_read_bdaddr() index 0 addr 00:26:5E:BA:00:18
    bluetoothd[1012]: src/sdpd-database.c:sdp_init_services_list()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
    bluetoothd[1012]: plugins/service.c:register_interface() path /org/bluez/1012/hci0
    bluetoothd[1012]: plugins/service.c:register_interface() Registered interface org.bluez.Service on path /org/bluez/1012/hci0
    bluetoothd[1012]: network/manager.c:network_server_probe() path /org/bluez/1012/hci0
    bluetoothd[1012]: src/adapter.c:btd_adapter_ref() 0x7ff8aa94a090: ref=2
    bluetoothd[1012]: network/server.c:server_register() Registered interface org.bluez.NetworkServer on path /org/bluez/1012/hci0
    bluetoothd[1012]: serial/manager.c:proxy_probe() path /org/bluez/1012/hci0
    bluetoothd[1012]: src/adapter.c:btd_adapter_ref() 0x7ff8aa94a090: ref=3
    bluetoothd[1012]: serial/proxy.c:proxy_register() Registered interface org.bluez.SerialProxyManager on path /org/bluez/1012/hci0
    bluetoothd[1012]: src/adapter.c:btd_adapter_ref() 0x7ff8aa94a090: ref=4
    bluetoothd[1012]: audio/manager.c:media_server_probe() path /org/bluez/1012/hci0
    bluetoothd[1012]: src/adapter.c:btd_adapter_ref() 0x7ff8aa94a090: ref=5
    bluetoothd[1012]: audio/manager.c:audio_adapter_ref() 0x7ff8aa94a8c0: ref=1
    bluetoothd[1012]: audio/manager.c:headset_server_probe() path /org/bluez/1012/hci0
    bluetoothd[1012]: audio/manager.c:audio_adapter_ref() 0x7ff8aa94a8c0: ref=2
    bluetoothd[1012]: audio/manager.c:headset_server_init() audio.conf: Key file does not have key 'Master'
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Adding record with handle 0x10000
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000003-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000100-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001002-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001108-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001112-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001203-0000-1000-8000-00805f9
    bluetoothd[1012]: audio/headset.c:headset_config_init() audio.conf: Key file does not have key 'SCORouting'
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Adding record with handle 0x10001
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000003-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000100-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001002-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 0000111e-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 0000111f-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001203-0000-1000-8000-00805f9
    bluetoothd[1012]: audio/manager.c:a2dp_server_probe() path /org/bluez/1012/hci0
    bluetoothd[1012]: audio/manager.c:audio_adapter_ref() 0x7ff8aa94a8c0: ref=3
    bluetoothd[1012]: audio/a2dp.c:a2dp_register() audio.conf: Key file does not have key 'Enable'
    bluetoothd[1012]: audio/a2dp.c:a2dp_register() audio.conf: Key file does not have key 'Disable'
    bluetoothd[1012]: audio/avdtp.c:avdtp_init() audio.conf: Key file does not have key 'Master'
    bluetoothd[1012]: audio/manager.c:avrcp_server_probe() path /org/bluez/1012/hci0
    bluetoothd[1012]: audio/manager.c:audio_adapter_ref() 0x7ff8aa94a8c0: ref=4
    bluetoothd[1012]: audio/avrcp.c:avrcp_register() audio.conf: Key file does not have key 'Master'
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Adding record with handle 0x10002
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000017-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000100-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001002-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 0000110c-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 0000110e-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Adding record with handle 0x10003
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000017-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000100-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001002-0000-1000-8000-00805f9
    bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 0000110e-0000-1000-8000-00805f9
    bluetoothd[1012]: plugins/adaptername.c:adaptername_probe() Setting name 'metanite-laptop-0' for device 'hci0'
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_set_name() index 0, name metanite-laptop-0
    bluetoothd[1012]: plugins/formfactor.c:formfactor_probe() Setting 0x00010c for major/minor device class
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_set_dev_class() index 0 major 1 minor 12
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_unblock_device() index 0 addr 00:00:00:00:00:00
    bluetoothd[1012]: src/device.c:device_create() Creating device /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
    bluetoothd[1012]: src/device.c:device_set_bonded() bonded 1
    bluetoothd[1012]: src/device.c:btd_device_ref() 0x7ff8aa974a30: ref=1
    bluetoothd[1012]: src/device.c:device_set_temporary() temporary 0
    bluetoothd[1012]: src/device.c:device_probe_drivers() Probing drivers for 00:02:72:20:4F:96
    bluetoothd[1012]: network/manager.c:network_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
    bluetoothd[1012]: src/device.c:btd_device_ref() 0x7ff8aa974a30: ref=2
    bluetoothd[1012]: network/connection.c:create_peer() Registered interface org.bluez.Network on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
    bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 00001105-0000-1000-8000-00805f9b34fb
    bluetoothd[1012]: serial/port.c:create_serial_device() Registered interface org.bluez.Serial on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
    bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 00001106-0000-1000-8000-00805f9b34fb
    bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 00001108-0000-1000-8000-00805f9b34fb
    bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 00001112-0000-1000-8000-00805f9b34fb
    bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 0000111b-0000-1000-8000-00805f9b34fb
    bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 0000111f-0000-1000-8000-00805f9b34fb
    bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 0000112f-0000-1000-8000-00805f9b34fb
    bluetoothd[1012]: input/manager.c:headset_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
    bluetoothd[1012]: src/device.c:btd_device_ref() 0x7ff8aa974a30: ref=3
    bluetoothd[1012]: input/device.c:input_device_new() Registered interface org.bluez.Input on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
    bluetoothd[1012]: src/adapter.c:adapter_get_device() 00:02:72:20:4F:96
    bluetoothd[1012]: src/device.c:btd_device_ref() 0x7ff8aa974a30: ref=4
    bluetoothd[1012]: audio/device.c:audio_device_register() Registered interface org.bluez.Audio on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
    bluetoothd[1012]: audio/manager.c:handle_uuid() Found Headset record
    bluetoothd[1012]: audio/headset.c:headset_init() Registered interface org.bluez.Headset on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
    bluetoothd[1012]: audio/manager.c:handle_uuid() server not enabled for 0000111f-0000-1000-8000-00805f9b34fb (0x111f)
    bluetoothd[1012]: audio/manager.c:handle_uuid() server not enabled for 00001112-0000-1000-8000-00805f9b34fb (0x1112)
    bluetoothd[1012]: audio/manager.c:handle_uuid() server not enabled for 0000110a-0000-1000-8000-00805f9b34fb (0x110a)
    bluetoothd[1012]: audio/manager.c:handle_uuid() Found Audio Sink
    bluetoothd[1012]: audio/sink.c:sink_init() Registered interface org.bluez.AudioSink on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
    bluetoothd[1012]: audio/manager.c:handle_uuid() Found AV Target
    bluetoothd[1012]: audio/control.c:control_init() Registered interface org.bluez.Control on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
    bluetoothd[1012]: audio/manager.c:handle_uuid() Found AV Remote
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_load_link_keys() index 0 keys 1 debug_keys 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmtops_load_ltks() index 0 keys 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_get_conn_list() index 0
    bluetoothd[1012]: src/manager.c:btd_manager_register_adapter() Adapter /org/bluez/1012/hci0 registered
    bluetoothd[1012]: src/adapter.c:btd_adapter_ref() 0x7ff8aa94a090: ref=6
    bluetoothd[1012]: plugins/mgmtops.c:update_settings() new settings db
    bluetoothd[1012]: src/adapter.c:adapter_mode_changed() old 0x00 new 0x03
    bluetoothd[1012]: src/adapter.c:set_mode_complete()
    bluetoothd[1012]: plugins/mgmtops.c:read_info_complete() mgmtops setting name (null)
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_set_dev_class() index 0 major 1 minor 0
    bluetoothd[1012]: audio/manager.c:state_changed() /org/bluez/1012/hci0 powered on
    bluetoothd[1012]: audio/telephony.c:telephony_init()
    bluetoothd[1012]: audio/headset.c:telephony_ready_ind() Telephony plugin initialized
    bluetoothd[1012]: audio/headset.c:print_ag_features() HFP AG features: "Ability to reject a call" "Enhanced call status" "Extended Error Result Codes"
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_disable_cod_cache() index 0
    bluetoothd[1012]: Adapter /org/bluez/1012/hci0 has been enabled
    bluetoothd[1012]: src/adapter.c:btd_adapter_unref() 0x7ff8aa94a090: ref=5
    bluetoothd[1012]: src/rfkill.c:rfkill_event() RFKILL event idx 2 type 1 op 0 soft 0 hard 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete() remove_uuid complete
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid_complete() index 0
    bluetoothd[1012]: plugins/mgmtops.c:handle_pending_uuids() index 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 16 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete() unblock_device complete
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 9 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete() load_link_keys complete
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 11 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 269 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:set_local_name_complete() hci0 name metanite-laptop-0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid_complete() index 0
    bluetoothd[1012]: plugins/mgmtops.c:handle_pending_uuids() index 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid_complete() index 0
    bluetoothd[1012]: plugins/mgmtops.c:handle_pending_uuids() index 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid_complete() index 0
    bluetoothd[1012]: plugins/mgmtops.c:handle_pending_uuids() index 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid_complete() index 0
    bluetoothd[1012]: plugins/mgmtops.c:handle_pending_uuids() index 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
    bluetoothd[1012]: src/adapter.c:register_agent() Agent registered for hci0 at :1.5:/blueDevil_agent
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_set_io_capability() hci0 io_capability 0x01
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid_complete() index 0
    bluetoothd[1012]: plugins/mgmtops.c:handle_pending_uuids() index 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_set_dev_class() index 0 major 1 minor 0
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 9 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete() set_io_capability complete
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
    bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete() set_dev_class complete
    so it makes sense that forcing obex enabled is giving alot of problems, because maybe the obex program that bluedevil uses actually is having problems.  I'm assuming bluedevil uses obex-data-server?  I'll have to look more into it
    edit> I just found someone having the exact same problem as I am, and it's the same Bluetooth card, too (Broadcom BCM2046).  Went unanswered.
    http://ubuntuforums.org/showthread.php?t=1178250
    Last edited by Kirby (2012-08-07 22:54:50)

  • How do I correct General Printer error 0X610000f6 for a HP Officejet 6500

    The printer keeps throwing this erro message out.  How can I correct it.

    Hi,
    Here is an all encompassing 0x error document that contains several of the documents for 0x depending on your error message along with it.  Look within the first 3 bullets in the document.
    0x error on front panel
    I suspect it is the 3rd bulleted section
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • Drag and drop correct answer window error#2032

    Hi, when trying to create a drag and drop with multiple correct answer combinations I click on the correct answer option to open the correct answer window and the window that opens is empty except for a bar at the bottom saying Error #2032. I can't access the correct answer options because of this as the window is blank. Help please!

    Hi there,
    Are you trying to click on the 'Correct answer' button from Drag and Drop Panel? Can you please post a screenshot of the error window?
    Thanks,
    Nimmy Sukumaran.

  • How do I correct an installing error?

    I selected install when I received an update to itunes.  After install was completed, I tried to get on to my Itunes.  I received:  "Itunes cannot run, file msvcr80.dll is missing from your computer".  A second message popped up saying:  Itunes was not installed correctly.  Please reinstall.  Error 7 (Windows error 126)"

    Sorry to hear that
    Hopefully this article will assist you:
    ≈≈≈≈≈≈≈≈
    http://support.apple.com/kb/TS5376?
    ≈≈≈≈≈≈≈≈
    Please do reply with results/questions.

  • How to fix "load correct tray A4" error message?

    I have Bonjour on two PCs (one Windows XP Professional, one Vista) networked to a new Mac Mini (Lion OS) with Canon MF4270 printer attached to USB port. Pages print from the Mac with no problem, but when I print from either PC the job prints the first page but then beeps and shows an error message: "load correct paper cassette A4" even though the default paper setting is letter. Any idea how I fix this?
    Neil

    Try uninstalling your MobileMe control panel.

Maybe you are looking for

  • How to Change the Forecast in Unedit mode

    Hi Experts I have a forecast for Jan to December.Forecast Key figure is not in the Edit mode.I wanna delete the forecast for the month of July and November. By using Macro it is possible to Delete wat ever period we want but here problem with macro f

  • Best Practice for CQ Updates in complex installations (clustering, replication)?

    Hi everybody, we are planning a production setup of CQ 5.5 with an authoring cluster replicating to 4 publisher instances. We were wondering what the best update process looks like in a scenario like this. Let's say, we need to install the latest CQ

  • Character display problems....11g connecting to SQL server

    Hi Gurus, db: 11.2 os: redhat 5.5 there is a problem when with character display with sqlplus and even worst on TOAD, SQL Developer tool. there is a Heterogeneous connection between 11g and ms sql serever. i use freedts, unixodbc and dg4odbc to estab

  • WLC 5508 Internal DHCP server issues

    Hi, I am hoping to get your feedback around the dhcp issues I am facing with Two Centrally Switched Wireless LANs. I have tried to explain the setup and the problems below and would appreciate it if anyone can suggest a solution for the problems I am

  • Restrict agent inbox status drop down values based on transaction type

    Hi, We have  around 20 inbox statuses mapped to different tranaction type and status profile. Now when we can see many other irrelavent  inbox statuses when searching for the transactions in the agent inbox. Is there a way to display only the transac