Correcting Colors with Imac and FC

Hello To everyone,
Do you know the best way to connect an external video monitor to the Imac. I been told that is much better to use a calibrated external monitor for this. Do you know if is make a diffrence if is anlog or digital in terms of quality to crorrect colors the best possible way?
Thanks a lot for your help

If working with any DV25 codec, connect your Mac to a qualified DV device (DV camcorder, VTR or converter) via Firewire then connect the DV device's analog outputs to your calibrated TV monitor.
If working with any other video codec/format, you'll most likely need a dedicated capture card which will only work with a computer that has a PCI slot available ... your iMac doesn't.
Then there's the Matrox MXO http://www.matrox.com/video/en/products/mxo/ but you'll need to have an extra monitor OUT port on your Mac.
-DH

Similar Messages

  • How to make my HP 5150 to print in color with iMac with 10.9 OS

    How to make my HP 5150 to print in color with iMac with 10.9 OS

    Read the user manual that came w/the printer and/or contact HP Support. 

  • Can't get playlists from one one computer to another.  Confident Home Sharing is turned on correctly.  Have imac and macbook Air and Lion.  Using smart lists.

    Can't get playlists from one one computer to another.  Confident Home Sharing is turned on correctly.  Have imac and macbook Air and Lion.  Using smart lists.

    Using Ethernet, I am attempting to stream the movies on my computer to my girlfriends computer through iTunes home sharing. I want to watch the movies that are on one computer on another.

  • I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

    I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

    Thanks - I guess it is like there were two of me!
    I bought the iPhone first and it seemed natural to link it to the (work) e-mail address which was in constant use. The iMac for home use came next and it seemed natural to use my home e-mail address, particularly as I knew by then that I would lose the work address after my imminent retirement. The same logic went for the recent puchase of the MacAir. I am not sure what happened with the iPad (also a recent purchase) - iTunes seemed to puch me towards the same ID as the iPhone.
    It is not a huge problem - just makes my persona look schizoid! Otherwise very happy with everything Apple.

  • I am new with iMac and I am trying to copy some file from my external HDD but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

    I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

    No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.

  • Is Samsung Galaxy 4 compatible with iMac and other Apple products?

    Is Samsung Galaxy 4 compatible with iMac and other Apple products?

    Yes, the s4 is compatible with music and photo transfers between your imac.  I don't have experience with the cloud, but it should be the exact same thing. 
    Now, there will be a few differences between how you get the files onto said device.  With the iPhone, you may be able to do it wirelessly, but with the s4 you will have to plug it in. 
    The s4 will not work with iLife or iLife applications either.  However, bigger screen, more customizable ui and experience with samsung phones personally, I would recommend the s4 over the iPhone 5. 
    Finally iMac

  • Are there any known compatibility issues with iMac and Google Chrome?

    Does anyone know of any compatibility issues with iMac and Google chrome. A Facebook friend who is a photographer posted recently that Chrome had ruined his iMac. He stead that it ran an update on itself that made safari and chrome unusable - slow running overall. In the end he had to reinstall his OS.
    Is anyone aware of this and should I un-install Chrome off my Mac?
    Thanks,
    S.

    There is nothing official but your post will attract a variety of personal experiences.   I once loaded Chrome and found myself with the dreaded MacKeeper malware, loads of pop ups and conflicts with my system.   Part of the problem is the huge range of add ons you are tempted to  take on, many of which are not as strictly tested as Apple extensions.   I would say, unless you have a specific reason, leave it alone.   The best browser is Firefox and for Macs, Safari is OK.

  • Managing Color with LR and the Canon Pixma Pro 9000 10.1.2.0 printer driver

    I would like help understanding how to manage color in LIghtroom with the Canon Pro 9000 10.1.2.0 printer driver. When I ask LR to manage color in the Printing Module Color Management Profile, it warns me to turn off the printer managing color. But I cannot find where to do this in the driver.
    The Color Options menu in the driver gives an additional choice for "Color Mode", but there are no choices here except "Standard", "Linear" or "Tone". The only Canon documentation I can find shows a choice to turn off printer management here, but this driver doesn't give me that choice.
    If I look in the driver's "Color Matching", I see only two choices: ColorSync or Vendor Matching. ColorSync brings up Canon profiles like "Pro9000 Fine Art Photo Rag", but selecting one of these gives a warning of unexpected results. This pushes me back to Vendor Matching. But is this turning off the printer driver and leaving it to Lightroom?
    Right now, I am getting the best results from choosing "Managed by Printer" in LR's Color Management Profile, and setting "Color Matching" in the Canon driver to "Vendor Matching". If I instead choose one of the Canon profiles in LR's Color Management Profile (and it tells me to turn off the printer managing, which I cannot do), then my prints have a slightly bluer color cast.
    Is there a way to turn off the printer managing color in this driver and turn this over to LR, or am I getting the best results possible with the printer managing color anyway?
    I am using a 2.4 GHz Intel iMac with OS 10.5.4, 2 gigs SDRAM, standard ATI Radeon HD 2600 Pro video card. I downloaded the Canon printer driver from their website, so I assume this is the latest. there is another driver available at their website, but for a lower bit depth. Should I abandon the 10.1.2.0 for this other one? I work with Nikon D300 NEFs, and I assumed the higher bit depth printer driver will work better with these images.
    Any help will be greatly appreciated!

    Dear DYP: Unfortunately, those choices are not available in the 10.1.2.0 Canon Printer driver. There are only 2 radio buttons, ColorSync and Vendor Matching. ColorSync then provides a drop-down menu, with no choice for turning off the printer driver.
    But I think I found the answer. I found a deeply buried FAQ on the Canon site (no direct URL; sorry!) Here it says:
    "Issue: How do I disable the printer driver color correction when using the CUPS driver in Mac OS X 10.5.x?
    Solution: Change color management options for printing (Mac OS X 10.5.x)
    Change color management options for printing
    Open the document you wish to print.
    Click 'File' and then click 'Print.'
    Note: If the Print window contains only two pop-up menus, click the triangle beside the Printer pop-up menu for expanded options.
    Select 'Color Matching' from the Print Options pop-up menu.
    Select 'ColorSync' if you want the application you are using, and not the printer driver, to control the color management of the printed output.
    Note: If you are using Adobe Photoshop CS2 or CS3 and have selected 'Let Photoshop Determine Colors', the 'Color Matching' from the Print Options pop-up menu is automatically set to 'ColorSync.'
    Select 'Vendor Matching' if you want the printer driver to control the color management of the printed output."
    I tried it, and chose "Automatic" as a choice in ColorSync. The choices under "Color Options" are then greyed out, implying that the Canon driver is now turned off.
    The prints came out great, with no color cast, and a little brighter than the printer managed prints.
    So, Vendor Managed means printer manages, ColorSync means LR manages.
    Thanks, everyone, for keeping me going on tracking this down!

  • No Sync with Imac and Outlook for mac 2011

    Hello,
    just bought a new bb torch, but it does not synchronise with outloop (office for mac 2011).
    no contacts, no agenda.
    I can not choose which agenda/contacts.
    It looks like the Torch goes to the standard email progam of Imac and not to Outlook.
    The only contacts are the standard contacts from addressbook imac.
    thanks in advance,
    rob

    I have just discovered the same thing - if you do a search around the topic you will find it confirmed that the only thing that will sync with Outlook for Mac is contacts.
    I've just moved everything over from a PC to a Mac and so to find it not working is so frustrating.
    SORT IT OUT RIM - or at least assure us you're working on it. 

  • DVI KVM switch to use with iMac and Cinema Display

    I currently have a 20" iMac that I use with a 20" Cinema Display. I'd like to share the Cinema display between the iMac and a Dell computer. Assuming this can be done, are there any recommendations for a DVI-KVM switch? Most important is no loss in video quality when the Cinema display is used with the iMac. The Dell is seldom used and even a straight DVI switch without mouse and keyboard sharing would be OK.
     20" Intel iMac + Cinema Display + Sony HDR-HC7 HD camera   Mac OS X (10.4.8)   All tools, no talent!

    I am also trying to link a Mac Mini and a HP PC with an nVidia FX5500 graphics card via a KVM switch. The mini works fine but the PC does not sync up and the screen is blank and the little white light on the lower right is blinking.
    Any news on your question would be appreciated
    mac mini Intel dual core   Mac OS X (10.4.6)  

  • External speakers not working with iMac and Lion

    I have a dual core imac with Lion and external speakers I just bought from Apple. I cannot get them to work with itunes or anything else on the imac. Can anyone tell me what to do? They work well with an ipod touch, but not the iMac.

    Hmmm. I plugged the speakers into the headphone jack. they are  the Audyssey Lower East Side Media Speakers. When I hoty option on the menu bar, headphones are checked as output. When I go to system preferences and check output, all it says is "headphone port." Still no change.

  • Can I use BB Pearl with iMac and still with PC as well?

    Hi. I've been using my BB pearl to synch with my PC for work (contacts/calendar/email). My personal computer is an iMac and I'd like to be able to synch the calendar and contacts to my BB pearl also. Is this possible? If so, how? Thanks for the help!

    There is an article on BB Geeks about synching your BB with both Mac and PC.
    http://www.bbgeeks.com/mac-and-blackberry/syncing-your-blackberry-with-both-a-mac-and-pc-88113/#more...

  • Airport extreme loses internet connection all the time with imac and macbook pro

    I keep losing the internet connection with airport extreme on my imac and macbook pro but NOT with my pc

    Ok, so when you say you lose internet connection, is it disconnecting from your wireless network so there are no bars?
    And are there usually full bars?

  • Troubles with iMac and TC

    i'am making the first backup for my new iMac. In 10 hours TC has nearly 700MB from 40GB.
    Is this normal??
    I have another new iMac and a MacBook. The Backup of the other iMac und the MB i did in one night!
    What's wrong with my iMac? Can somebody help?

    I tryed to make my backup over a FireWire HD with TM.
    Result: much faster as with TC. But after three hours backup my iMac had a black screen!! I had to restart. This is the report:
    Sun Aug 17 18:24:59 2008
    panic(cpu 1 caller 0x00331C13): "HFS: corrupt VH on Backup of Daniele D'Amaros iMac, sig 0x0000, ver 0, blksize 0"@/SourceCache/xnu/xnu-1228.5.20/bsd/hfs/hfs_vfsops.c:2794
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2cc6fd78 : 0x12b0fa (0x4592a4 0x2cc6fdac 0x133243 0x0)
    0x2cc6fdc8 : 0x331c13 (0x4891d4 0x6bee8d8 0x0 0x0)
    0x2cc6fe38 : 0x333b8e (0x6bee804 0x2 0x0 0x2cc6fe70)
    0x2cc6fea8 : 0x1f6afa (0x357b930 0x2 0x2b36c64 0x1f60b3)
    0x2cc6fee8 : 0x1e051c (0x357b930 0x2 0x2b36c64 0x0)
    0x2cc6ff08 : 0x1db2ed (0x357b930 0x0 0x1 0x0)
    0x2cc6ff48 : 0x1e0551 (0x1 0x1e04e4 0x0 0x138f71)
    0x2cc6ff78 : 0x3ddde2 (0x2e52e70 0x2b36b60 0x2b36ba4 0x2c1b998)
    0x2cc6ffc8 : 0x19f2c3 (0x2b3cc20 0x1 0x1a20b5 0x6b6e128)
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbfffff18
    BSD process name corresponding to current thread: update
    Mac OS version:
    9E17
    Kernel version:
    Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
    System model name: iMac8,1 (Mac-F226BEC8)

  • I've updated one of my contacts and the entry is corrected on my iMac and my iPhone, but not MacBook.  Why not?

    I've updated one of my contacts (to correct their email address) and the correction was made on my iMac (where I made the correction) and my iPhone, but not on my MacBook.  All three devices are on the "cloud"...

    but not on my MacBook.  All three devices are on the "cloud"...
    On the Macbook switch Contacts off then back on in System Preferences > iCloud then restart the Mac.

Maybe you are looking for

  • Connecting Creative Megaworks 510D to Nforce - Analogue or digital bes

    Hi, I am awaiting delivery of a set of Creative Megaworks 510D 5.1 speakers, and have a couple of questions for you.. 1) What is the best method of connecting them to my K7N420 Pro?. I have a CNR (AMR?) card as a plan B, but my first preference would

  • Material Document Plant wise

    Hello, I want to create GRN numbers seperately to get generated for two different plants.But however Standard SAP does allow us to do so. Can anyone please help me to find a solution for creating Material Dcoument number range Plant wise. Is there an

  • Backend role for FF

    Hi Guys, I read the FF installation and user guide and there, it mentioned that there are 3 pre-defined FF role that comes in the DAT file of FF. Where can I find that DAT file, so that I can ask my basis team to download those standard roles into th

  • Query in PA

    hi all, i am facing a problem in PA . Kindly provide your sugesstions. If we have part time monthly employee then the annual salary will still show the full time (100 %) annual salary. But in case we have hourly paid employee the annual salary is adj

  • SUS email notification.

    Hi, I am changing the email text message in SE61 for the document BBP_SUS_SUP_NOTIFICATION”.  And in the text message I am printing the &DOCTYPE& &DOCNO&.  When I am receiving the email, <b>I am not getting any value of this (&DOCTYPE& &DOCNO&) two f