Correcting License Information

I have a machine on which a friend installed his copy of Aperture.
I now have my own copy, and wish to have the software on my machine properly licensed to me! (Aren't I good?)
But I don't know where the registration info is stored, or how I can delete it so I get prompted for new serial numbers etc. I tried deleting and re-installing Aperture, but that didn't help...
Any ideas, anyone?
MacBook Pro Mac OS X (10.4.6)

You need to remove the following file from your hard drive:
/Library/Application Support/ProApps/Aperture System ID
After removal, you will be prompted to register with your serial number.
Mac OS X (10.4.7)

Similar Messages

Licensing information

Hello All,
I need licensing information related to all components SRM!.
Tried to search ,but did not get much.
Will be grateful to have as a reply or a document.
My questions are:
1. If we install all the components related to SRM viz. EBP,SUS,Bidding Engine,CCM,
LAC, XI,EP, BW and ECC also ofcourse -->Each component would need seperate license or as a bundle?
2. How the user licenses will be given for all these components?
3. If we have alreay have ECC in place will that benifit for SRM license?
4. If we decide to use EP hence SSO what will there be any benifit?
5. Any idea about remote counsulting charges?
The versions of components should be:
ECC 5.0
EBP 5.5
SUS 3.0
BI 7.0
XI 7.0
Helpful answers will be rewarded.
BR
Dinesh
[email protected]

Hello,
Thanks for replies.
@ Marcin -
Now to more specific point.
I had read on this forum that for Bidding engine yo can test the functionality without
seperate license on dev server. But for prod server Bidding engine you need to have a seperate
license.
Is it not correct then?
@ Ramki-
Should I assume that licensing procedure for components and users is highly flexible
and depends on the negotiations between SAP and customer.
Pl. respond.
BR
Dinesh

Install Disk for Windows XP/License information 3000 V100

My hard drive is having some problems. It is working but my paging file is not working. Once my ram is used up my system starts having resourse problems. I have ordered a replacement hard drive. I will try to reimage my hard drive but I am afraid it won't reimage properly and will have to reinstall XP professional. Where do I get the original operating system software? My original license information on the bottom of my Lenovo 3000 V100 have rubbed off. So where can I get the install disk or software for XP professional and also get all of my original license information?
Thanks
Greg

Instructions, not a question.

I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information. Im based in Japan but my card is registered to a UK address. the fields only allow for a Japanese style address and postco

I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information. Im based in Japan but my card is registered to a UK address. the fields only allow for a Japanese style address and postcode. What can i do to complete the payment and get photoshop!

As far as I know, your registered location and your credit card information must match... but,
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

License information about SJDS5.2 and SJISW 1 2004Q3

In our environment SJDS5.2 and SJISW 1 2004Q3 is installed on Solaris 9 4/04 on two SPARC machines. We also use MMR feature.
Suddenly I am asked to get licensing information about these products in our environment which was actually installed and configured by another person who has left the company.
Can any one guide me about the licensing information related to these products? After going through this forum I could find some one mentioning like if we use solaris 9 then upto 200,000 entries are free. Is it about the number of users using the LDAP or something else?
Also we have valid support plan for these products from SUN.
Is it based on CPU? Any help on this will be appreciated.
SMV

Product license details are installed under a LEGAL root directory on disk as part of the installation. You can also alternatively go back to the download section and review the license at: http://www.sun.com/software/products/directory_srvr_ee/get.jsp
The free 200,000 entries you refer to (entries = objects, not users) are only for DS entries Enterprise Wide, those don't apply to DSEE and consequently don't give you free access to Identity Synchronization for Windows.
You need to go back to your Solaris entitlement to find the details.
Also you always have to subscribe a directory maintenance contract to get support, this is not covered under Solaris maintenance.
Directory maintenance contract are based on the total number of entries managed by you directory service. It is independent from you hardware deployment.

SQL Server Licensing Information

I want to retrieve SQL server licensing information e.g. License type, Count, License Code etc.
Any help?
RK

You can find the license type using serverproperty function as shown in the below link, http://sql-articles.com/index.php?page=Scripts/ServerProperties.php
You may also refer these links where Arnie and Madhu have provided useful information regarding licenses.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2435258&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2713025&SiteID=1
- Deepak

Finding SQL Server licensing information for 2005 and above.

I can use SELECT serverproperty('LicenseType'), serverproperty('NumLicenses') on SQL Server 2000 but these server properties are no longer being returned in SQL Server 2005 and later. This information doesn't seem to be recorded in the registry for
SQL Server 2005 and later.
Is there an easy way to query or report licensing information for SQL Server 2005 onwards?
Thanks.

Hello,
Since SQL Server Version 2005 you have all license Information only on paper; so you have to lookup your papers to get the Information.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Need to know FWSM License information layout

Hi ,
I hope that you guys can help me to understand FWSM license information I'm a newbie on cisco firewalls
FWSM License information is as follows :
FWSM# sh ver
FWSM Firewall Version 3.2(2)
FWSM up 6 days 8 hours
Hardware:   WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash STI Flash 7.4.0 @ 0xc321, 20MB
0: Int: Not licensed        : irq 5
1: Int: Not licensed        : irq 7
2: Int: Not licensed        : irq 11
The Running Activation Key is not set, using default settings:
Licensed features for this platform:
Maximum Interfaces   : 256
Inside Hosts             : Unlimited
Failover                    : Active/Active
VPN-DES                : Enabled
VPN-3DES-AES      : Enabled
Cut-through Proxy    : Enabled
Guards                    : Enabled
URL Filtering            : Enabled
Security Contexts     : 2
GTP/GPRS               : Disabled
BGP Stub                 : Disabled
VPN Peers                : Unlimited
Serial Number: SAD114600SX
So it means do we have to purchase license for implementing FWSM in Transparent/Routed Mode.
Thanks

Hi,
To my understanding there should be no licensing requirement for using the FWSM in Routed/Transparent mode.
I think the licensing has more to do with the Max Interfaces / Security Contexts usually.
Heres one link to information about the FWSM
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/ps4452/product_data_sheet0900aecd803e69c3.html
One thing to note also is that FWSM is a Cisco product that is getting old. There is ASA Module that replaces the FWSM. We are moving to use ASAs instead of FWSMs.
Here are the information related to that from Cisco
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/eol_c51-699134.html
- Jouni

[svn:fx-trunk] 5812: Fixed a bug where direct use of Animation failed because AnimationProperty was not setting up its internal keyframes with correct duration information , so the animation would skip immediately to the end.

Revision: 5812
Author: [email protected]
Date: 2009-03-31 11:34:56 -0700 (Tue, 31 Mar 2009)
Log Message:
Fixed a bug where direct use of Animation failed because AnimationProperty was not setting up its internal keyframes with correct duration information, so the animation would skip immediately to the end.
Bugs: SDK-20356
QE Notes: spark/effects Mustella tests currently hosed, couldn't run test suite
Doc Notes: None
Reviewer: Jason
Testing: checkintests, Mustella effects tests could not be run (post-rename issues)
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20356
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/AnimationProperty.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/animation/Animation.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateColorIns tance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateShaderTr ansitionInstance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/FadeInstance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/MoveInstance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/ResizeInstance. as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/Rotate3DInstanc e.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/RotateInstance. as

Hi
Can you please try setting up full persmission in the security properties for everyone on the wsconfig folder C:\ColdFusion10\config\wsconfig and restart ColdFusion Server.
Swaraj

How to edit "license information for multiple logon" screen

hey gurus
i need to know how to edit or modify the 'license information for multiple logon" screen. this screen usually pops up when a user tries for a multiple logon to sap. We have activated the parameter 'login/disable_multi_gui_login' but we would like to modify the screen in such a way that only one radio button which says 'terminate this logon' should exist. we would prefer to remove the option of 'continue with this option and end any other logon'. Now i searched but i could not find anything to implement this so i am here and i need your advice and suggestions.
thanks in advance.
cheers.
nate

hey bernhard
many thanks for your reply..i appreciate your help. its just that its not explicitly mentioned we cant modify the screen in the note.
Is there any other note that specifically say so?
thanks for your time buddy.
regards

When trying to purchase songs on my itunes with a gift card, its telling me i have to have the correct billing information on my debit card which I know is correct already. How do I go about fixing this?

When trying to purchase songs on my itunes with a gift card, its telling me i have to have the correct billing information on my debit card which I know is correct already. How do I go about fixing this?

Part of the validation for credit cards is that they need to be registered to exactly the same name and address that you have on your iTunes account, which prepaid cards tend not to be. Do you have a proper credit card that you could use ? Or are iTunes gift cards available in your country so that you could try using them as your payment method ?
Until you have a valid payment method on your account and what you owe iTunes has been paid off then you won't be able to download any item from the store, including free apps (and updates to apps).

How to fix iWeb Test Connection Failure when i have correct login information??

I have been using iWeb and updating my site with no issues. Suddenly I can not connect to the FTP and when i test the connection with the correct login information i get a message that a connection could not be established. I'm not real familiar with how iWeb works to post to our website so i'm confused on why it is not connecting. Any help would be great!

Sometimes the built in iWeb ftp does this. You can test to see if it is an iWeb problem by perhaps trying a dedicated ftp programme instead such as the free Cyberduck. Download Cyberduck and then you'll have to publish your website from iWeb to a local folder and then use Cyberduck to connect to your host with the same log in details and see if this works. If Cyberduck can connect to your host/server, then the problem is with iWeb.

How to suppress License Information for multiple logon screen?

Hi,
While LOGIN we will get "License Information for multiple logon screen" will displayed.
How to suppress that screen.
Regards,
Bala

>
bala virupaksha wrote:
> Hi,
>
> While LOGIN we will get "License Information for multiple logon screen" will displayed.
> How to suppress that screen.
>
> Regards,
> Bala
and why would you want to do that?
does your contract with SAP say, that you may use multiple logins for free? would SAP's contract-issue department agree that -in your case- it's not necessary to record multiple logins?
have you read this part of the SAP license policy?
SAP gives express notice that the accessing of a system by more
than one person using one and the same named user constitutes
a breach.
tell me this does not apply to you ...

We purchased Adobe Photo Shop Windows with 2 licenses in December 2012. We only installed 1 instance and woould like to isntall the other now. How do we look up our Activation/license information

We purchased Adobe Photo Shop Windows with 2 licenses in December 2012. We only installed 1 instance and would like to install the other now. How do we look up our Activation/license information?

Assuming you got it directly from Adobe as a download, click on the red logo near the top-left of this page. Then click the [ Manage account ] button. After logging-in you should be able to find all the information on products you've purchased.
-Noel

Oracle weblogic 10.3 license information

We have purchased Oracle weblogic 10.3 from a vendor and have installed by the application team. I need to confirm how can i check the license information (information reg no.of users etc) after installation of the product in the windows server 2008. Is there is any log file which will have license details??

Oracle has removed the licensing which is bound to IP addresses long before itself.
From WebLogic Server 10.3 and higher, no license file (no license.bea) is required by Oracle. However, you should deploy the product only in environments which are bounded to your license. That is you should see that if you bought license for 8 cores, you are deploying it only in a 8 core environment and not more.
There are few notes on the support site related to this.
Regards,
Atheek

Correcting License Information

Similar Messages

Maybe you are looking for