Correcting non-text photos when camera was in text mode?

Hello,
for capturing text the text scene mode for the camera is very handy. However, I did not realize that the Blackberry saves the mode for the next time and does not go back to the automatic scene mode when turned off.
So I now have a whole set of photos from my latest weekend trip to London which were all taken in text mode.  To correct them at least a bit, I could use a photo editor to enhance color and so on, but there would be a lot of trial and error involved to fintd the right settings.
Is there anyone out there who knows what the text mode actually changes? Something like "reduces the color saturation by 50% and then enhances contrast by 25%"? With these data I think it would be possible to rescue the photos.
Thanks in advance
Phil

Nobody has an idea? 
Acutally, just for me to understand the objective of this forum: Is this purely a community for users to help other users, or are there also official RIM support staff here?
Thanks and best regards
Phil

Similar Messages

  • I imported 100 photos, when I was reading photos iphoto crushed, and when I restarted iphoto all photos imported had disappeared!Is there a way to find them. They were imported, they can not have disappeared from the hard disk?

    I imported 100 photos from my camera (Canon) into iphoto. The importation went well, and when I was watching the photos, suddenly iphoto crashed. I restarted iphoto and realized that the photos had disapered. The events are availbble into iphoto but they are empty, the photos have dispeared. I can not believe they disapeared as they have been imported and read once, they must be hidden somewhere on the disk? Is there a way to find where they are?

    Assuning you're running iPhoto 9 or later try the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
    2 - Run Option #4, Rebuild Database.
    OT

  • HT1414 restoring lost photos when restore was used

    restoring was done by mistake, I lost all photos, videos, contact phone numbers and texts from 11/2011 to current. I need help getting my phots back. any help would be greatly appreciated.

    what did you do to restore

  • PIT recovery until time when database was in backup mode

    Hello,
    Is it possible to recover database until some point/time which is within "time window" when database tablespaces were still in online backup mode?
    I was basicaly replicatying database from source to target DB by putting DB to online backup mode, then copy all datafiles, after copy of datafiles was finished I started applying redologs generated on source DB afterwards. After I applied tens of redologs with "recover database until cancel using backup controlfile" and then typed "CANCEL" after 10-20 redologs applied I still got an error that opening DB would get an error due to inconsistent datafile. When I ended backup mode on source DB and applied few of redologs after ending backup mode on source DB datafiles were consistent.....
    Thx a lot for answer in advance.

    Hello Hemant K Chitale ,
    thats clear. I probably did not express it clearly, so I will describe it once again:
    Teoreticall scenario 1:
    I put 'source" database to backup mode and start copy datafiles to "target" db. When copy of all datafiles is succesfully finished (lets say it 5:00AM), I don't issue "end backup" on source DB but I keep tablespaces in backup mode until 7:00AM. On target DB I will start recovery and apply redologs from source system.
    Question 1:Is it possible to recover database until time 6:00AM? At this time all datafiles were already succesfully copied, BUT source db was still in backup mode. Or will I be able to get target DB to consistent state only after 7:00AM (end backup issuied on source DB) and not in window 5:00AM-7:00AM?
    Teoreticall scenario 2 (small correction comparing to scenario1):
    I will put source DB to begin backup mode at 5:00AM on 20.february and let it in this state until 7:00AM on 20.february. On target DB I will restore backup from source DB performed day before (or few days before does not matter) that means on 19.february and start to apply redologs generated after this backup.
    Question 2: Will I be able to recover DB until 6:00AM on 20.february and open database after recovery until this time? Or wont I be able to recover and open DB witin window 20.february 5:00AM-7:00AM (source db in backup mode)
    Bear in mind this is just teoreticly (don't ask me why would you do it and why you don't do it this way etc...). I just want to understand how it really works ;)
    Thx a lot!

  • Non Standard warning when activating structure

    Hello,
    I am getting a non standard warning when i was activating my Structure and it said , "Exactly one field TXTSP of type LANG: Selection as text language possible", what does it mean.Please assist me and tell me what needs to be done.
    I am activating this structure with refrence quantity fields to create a generic datasource.
    I have my LTXA1 and  TXTSP fields in there.
    Thanks.

    Hi Sam ,
    thanks for answering,
    How does this impact my structure or view.
    At this time for my LTXA1(Confirmation Text)  i have CO_RTEXT as my data element.
    For my TXTSP (Language key) I have SPRAS as my data elemnt.
    And under my Entry/Help for  TXTSP (Lang Key) i have  T002 as my check table.
    Please tell me what happens i wouldnt change this as its just a non standard warning.
    thanks

  • I have a ipod touch 5 and when i was loading it up to my computer i chose to restore my last ipod, which had no camera. After all my music was loaded all of my photos i had taken with my ipod had been deleted. Is there any way i could get photos back?

    I have a ipod touch 5 and when i was loading to my computer i chose to restore my data from my last ipod which did not have a camera. Then after all my music was uploaded i noticed that all the pictures i had taken on my new ipod had been deleted. I think it may be because i chose to restore my last ipod which no photos on it. I was wondering if there is any way to restore my lost photos?

    If you backed up the iPod before restoring it then restore from that backup. See the restore topic of:
    iOS: How to back up
    Also, if yoo have that backup you can extract the photos by:
    Recover iPhone, iPad or iPod photos from backups with Picturescue
    If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer

  • When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the pastiPhoto cannot import your photos because there was a problem downloading an image.

    When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the past, "iPhoto cannot import your photos because there was a problem downloading an image."

    Can you access the images with Image Capture (in your Applications Folder) ?

  • My iPhone 4s keeps showing more space being used for photos than i have - i have deleted cache folders, unselect and reselect in iTunes and nothing appears to work my iPhone still shows 6.5 gig use of photos when i only have the  camera roll listed

    my iPhone 4s keeps showing more space being used for photos than i have -
    i have deleted cache folders, unselect and reselect in iTunes I read one post
    where they said keep syncing and in a couple days it would correct itself, that
    hasnt happened.  I have see others have the same issue but no solution and nothing
    appears to work my iPhone still shows 6.5 gig use of photos when i only have the camera roll listed

    i thought the photo stream only holds 1000 i usuaaly take each month and save them to iphoto but if thats the my ipad should say the same amount and it doesnt - it shows 2.5 gig which is correct for iphoto.  and i havent ever had that much but if for some reason icloud has that much saved how do i delete and again if it does why doesnt ipad show that amount _ HELP!

  • Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash, if possible.
    Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • I took pictures on my iphone when it was on the lock screen and now I can't view the pictures in all of my photos. How do I view them?

    I took pictures on my iphone when it was on the lock screen and now I can't view the pictures in all of my photos. How do I view them?

    If you go to the Photos app, is there content in the Photo Library? These would be pictures that are synced to the phone from the computer. Photos in the camera roll are those that you take with the phone, or save from email, MMS on the phone. What type of pictures are you trying to get rid of? If you are trying to get rid of the synced photos, you need to connect to iTunes, select the iPhone in the device pane, then go to the Photo tab in iTunes and remove the check mark by sync.

  • Photo Downloader APD hangs freezes in Photoshop Elements 9 when camera or iphone 4S selected

    I can't get any new images downloaded off my devices.  I usually do this with Photo Downloader in the Photoshop Elements 9 Organiser ... I go into Get Photos > from camera or card reader, then select the relevant device (iphone 4S or Canon 40D).  As expected it asks to select a device, whcih I do, but then it gets stuck on "connecting to devlce, please wait".  I first noticed this problem with my iphone 4S but have since not been able to download from camera either.
    I am running Windows 7 with Photoshop Elements 9, using iphone 4S with latest version of software and latest itunes.
    I have tried:
    I have updated the software from within elements (detected camera raw 6.5 needs updating; done) and the problem persists.
    I have optimised/ repaired the catalog
    There seem to be threads relating to hanging when you try to change the location in downloader.  That is not my problem.  Camera raw 6.5 seemed to cause the problem in that case.  Today I have just updated my elements software (it detected camera raw 6.5 required installation so I suppose I must have been running the previous version of camera raw).  Hence camera raw 6.5 not the problem in this case?  If it's relevant, a hard drive search detects camera raw.8bi 16 Sept 2011 19012kb in c:\programfiles\commonfiles\adobe\plugins\elements9 as well as camera raw.8BI with 8 Sept 2010 10179kb in c:\program files\adobe\adobe premiere elements 9\apd\photo downloader\plugins
    This happened around the time I upgraded the iphone 4S software (friday 24 August 2012) to the latest version.
    Thanks for reading
    Kimberley

      To check that the update installed correctly go to the Editor menu and click:
    Help >> About Plug-in >> Camera Raw
    You should see a pop up with the version number.
    Press Esc to close.
     

  • Could someone help me restore my photos?  I was trying to "restore my database" in iPhoto when it shut down - now my thumbnails are distorted, logged under a new name, and when you click on a thumbnail it opens as another photo.  I was following another "

    Could someone help me restore my photos?  I was trying to "restore my database" in iPhoto when it shut down - now my thumbnails are distorted, logged under a new name, and when you click on a thumbnail it opens as another photo.  I was following another "helpful hint" hold down the option and command key and restart iPhoto - select the top three and you should be able to get rid of the dreaded exclamation point.  My MAC ran through the first two options dealing with thumbnails, but crashed during the "restore database"  step and now I have a mess.  Help, please.  Thank you.

    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • I deleted photos cause the capacity is so big but i backup first on itunes then when i was to restore some of those i cannot find photos from the last backup that i 've done. What to do?

    I deleted photos cause the capacity is so big but i backup first on itunes then when i was to restore some of those i cannot find photos from the last backup that i 've done. What to do?

    As far as i know, you can use a third party iPad photos recovery software to have a try. If i remember correctly, this software has two methods to restore your photos. One is recovering from your iTunes backup, another is recovering from your iPad directly.
    http://easy-iphone-recovery.blogspot.com/iphone-recovery-resource.html
    It is worth to try if your photos are important.

  • In ADOBE BRIDGE CS6 "folder can not be created" appears when getting photos from camera

    Has anyone seen this when getting photos from camera in ADOBE BRIDGE CS6?
    "Folder cannot be created"

    I solved the problem myself.
    jwerth2

  • Why is iMessage taking my incoming emails and then not making them available for my PC to get?  Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).

    Apple is great!
    Why is iMessage taking my incoming emails and then not making them available for my PC to get?  Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).
    I compose an iMessage with the destination as my email address and I attach 2 photos I want on my PC.  I send them several times from my iPhone 5C but they never arrive. I look at my ipad later and realize that it's iMessage app is getting ( and swallowing) these emails. I then turn the ipad off.  Still can't get the photos through because iphone is now getting them on it's iMessage.  I turn off the iMessage feature and try to send photos from text msging.  Phone tells me it can't send photos unless iMessage it turned on.  What happened to regular MMS text messaging?  I go and try to send photos as an email attachment and see that there is no option to attach from the stupid email program.  I look up online to learn about the brave new world of apple attachments and send them.
    Why is iMessage taking my incoming emails and then not making them available for my PC to get?
    The email program on my iphone is not configured to remove messages from the server.
    If iMessage is turned off I don't have the issue.
    Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).

    Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

Maybe you are looking for

  • 'Close Project' in Captivate 4 not working

    Hi, I have a number of projects where I set the preferences to close the project, and it works in some and not others. I have a slide with a 'Done' button.  When the user clicks it, it goes to another slide with nothing on it but the background and a

  • I have pdf files created by a scanner. How do I save them in PDF/A?

    I scanned forms which were used in a project to preserve them. Now I want to save them in a PDF/A format for long term preservation. I have Acrobat Pro XI. When I run the program either in Save As or through the Preflight I get a whole bunch of probl

  • B2B - OSB Integration for RosettaNet Document

    Hi, I have the following requirement: http://<<hostname:<<port>>/b2b/httpreceiver <-- OSB Business Service(BS) <-- OSB Proxy Service (PS) The remote trading partner will be using the endpoint URL of the proxy service(PS) to post the RosettaNet messag

  • FB70 - Payment Terms and discount rates

    Dear Friends, We have a requirement in transaction FB70, in which we wanted to provide 3 different discounts for a given payment term, but the transaction by default provide only 2 discounts. Is there a way in which we can add a third discount for a

  • Error in Adding Users to an Adhoc Role ...

    Hi, I have a requirement to add two users to receieve the notification. I identified the role to which the notifications are being sent. Now i am tring to add the user to that role using WF_DIRECTORY.AddUsersToAdHocRole API but i get an error saying