Correcting the duplicate number range for 57 f 4 challan
Dear Friends ,
By mistake I have maintained same number range for both my series group in J1I9 under object J_1I57FC.
Intially I was doing sub con transaction only for one plant , but recently I started doing sub con transaction of the other plant .
It allows me to create 57F4 challan in the second plant , but while using the challan number in MIGO , it shows an error message .
I cannot change the number range for the second plant now because the 57F4 challan has been generated .
Kindly guide me how can I correct the above problem.
Thanks in advance
Hi,
This is a problem for 57F4 challan number range you cannot use same number range for two different series group even while maintaining number range system not issue any message , i faced the same problem then from this fiscal year we have used two separate number range so better create new number range and assing in subcontracting attibutes as this we faced in development for the GR for which we found the problem is not solve.
regards,
zafar
Similar Messages
-
The external number range for Equipment master
Dear Experts,
My client has requirement to use KKS code as Equipment number as they want to create Notification and Maintenance order using the KKS code.
For example 10H, 10BEB, 20BHB04, 10LBG10AA001, 10HLA13AA001A, 10ETG10AN001-E etc.
All these KKS codes has different character length hence it's not fit in any number range.
can anyone suggest the external number range that I can use for above requirement?
Thanks.Parag,
I have checked again. It is working correctly. Remember that the following setting the check box below the column A should be empty. This allows Alphanumeric characters in the numbers.
SPRO Path to above setting
My Equipment category of External Numbers is 'A'.
KJogeswaraRao -
How do I change the visible number range for the y-axis in numbers?
I have a chart that has a lot of white space because the y-axis starts at zero.I would like the graph to show the range 20-35. How may I omit the range for which I have no data?
agood,
You can control Max, Min, number of grid lines, etc. for X and Y axes.
Here's an example from the Chart template:
I've boxed the relevant areas.
Jerry -
How to setting for the number range for Business Partner
Dear Sir,
I create the new role for Business Parnter , However, I would like to set the new number range for that buiness Partner with that role.
Please kindly advise what is the step to do.
Thank you and best regards,
VimolHi Vimol,
In CRM standard system it is not possible to link specific role with specific grouping.
To achive the same go to following IMG path:
SAP Implementation Guide>Cross-Application Components>SAP Business Partner>Business Partner>Basic Settings>Number Ranges and Groupings>
Define Groupings and Assign Number Ranges
Hope you selected the opton button for column 'Int Std.
I already suggested a work around above.
Best Regards,
Satish Mathala -
Dear All,
I work for Indian client...
I have maintained Number ranges for excise invoice as follows...
NO-YEAR-FROM NUMBER-TO NUMBER-CURRENT NUMBER
01---200800000000010000004999--64
I want the Number to be continued for 2009 also.
For eg, if the last number in 2008 is 64.Then next invoice in 2009 should be 65.
Now my doubt is, For 2009, what should i do ?
Will system cosider the same range for 2009 or Should i maintain no range for 2009 ?
RegadrsHi
System will not consider the same number range for 2009. You have to maintain this for 2009 too.
If you want to continue the same number range then you have to maintain it as below. This is only required only if you want the number to be continued in the 2009. Else you can set the status as 0 instead of 64.
01---200900000000010000004999--64
Also the number range from 1 to 64 for will not be reflected in year 2009. It will be reflected in year 2008.
Regards
MBS -
Same number range for two different series groups?
Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop -
Number range for extended classic scenario
Hi,
we've activated extended classic scenario for some defined categories (material groups), other will use classic scenario as before. It works, we are able to craete POs in both ways. I've tried to use the same number range for backend POs and for local POs. I've set the same number for both ranges but only the one which is used is getting updated. Is it possible to syncronize these ranges so backend POs will all be created in the same range?
Regards
HubertHi Hubert,
Not the best practice that you are following. it might work for some time but will fail for most of the time . The maintenance is going to be huge and you could expect problem with these.
I would suggest not to think on the solution of same number range itself.
Thanks
Iftekhar Alam -
Number Range for Returnable Gate Pass.
Dear All,
We Issue an Returnable Gate Pass with Material .
These RGP has common series for all the plants.
For example, in 1200 plant we have issued RGP with series number 4900003295 dated 21.07.08 and in 1400 plant we have issued RGP srl no. 4900003235 dated 03.07.08. The system is generating the number from one Number series only.
This is serious problem.
My Client wants to get the different Number Range for RGP issued from Different Plants.
Points will be awarded .
Please reply.
AVHello,
Please note that Number Range is at Client Level hence you cannot have different number range for different plants. Th same is not possible in SAP.
However there is a workaround, in MIGO we have GR/IR field. In this field we can go in for automatic number range based on Plant. By doing this you can explain you client that though the Material Document number range will remain the same but still by looking at the GR/IR number you can easily differentiate as to which Plant.
You can define the same in Materials Management>Inventory Management and Physical Inventory > Number Assignment > Define Number Assignment for Goods Receipt/Issue Slips
Regards -
Different number range for recurring docs for diff company code
Hi,
We define X1 as the number range for recurring company codes. For 2 company codes, we have given the same number range for X1, 100000-1999999
Now when a recurring doc is posted for both the company codes monthly, the company codes have same dco number which confuses the user.
Is there any way to change the set up of the number range like deleting the one existing and starting with the new series
Any other suggestions are appreciated
-VaibhavHello,
You cannot deleted the number range if it has already been posted, however, you just limit or restrict the upper limit equal to the current number.
Create a new number for other company code.
the number ranges are defined at company code level / fiscal year level.
The number ranges can be year dependent or year independent
They may be internal or external.
Regards,
Ravi -
Change in number range for Job Family
Hi,
We have a requirement where we need to change the existing number range for object type Job Family.
The number range begins from 500* series. Now this needs to be changed to 90000000 number range.
Now the question is what would be the impact if we delimit the objects with earlier JF number range and
create the job families as part of the job catalogue with 90000000 number range.Hello,
Only difference/impact is you will get new number ranges only.
regards -
Create a number range for job keys
We have different business units within our company and would like te set up different number ranges for the job keys that are generated on the organizational data for the different business units.
My steps to create a job key is as follows:
- Go to transaction PP01
- Select "Job" on Object Type field
- Select "Object" under Infotype Name on the Active tab and click on create.
- I now create my Object abbreviation and object name
- When I save, the screen returns to PPO1 and the Object ID field now have a job key number in (which is linked to the Position number and displayed on IT0001). The number is e.g. 60000000
My question is, that if we are creating a new object ID for e.g. for Business Unit 1, we would like the Object ID to generate a number in the number range e.g. 60000000 - 69999999
If we we are creating a new object ID for e.g. for Business Unit 2, we would like the Object ID to generate a number in the number range e.g. 70000000 - 79999999
Etc.
Is it possible to do something like this as there is no indication on PP01 as to what Business Unit you are creating this Object ID for and therefore it would not know what number range to allocate.
Is there perhaps someone that is doing it this way and who has a solution for me.
Regards
HelmienHi helmien vanrenen ,
Go for transaction code OONC or table T77S0 and group NUMRG COMP Do not enter value.
Next step is go to transaction code OONR here you can assign the different number ranges for different Object Types.
Warm Regards,
Kapil Kaushal -
Number range for rental object
rental object type rs and ps use the same number range ?Can I distribute the diffierent number range for the different type?
Dear Pan,
PS/RS/RU are called RO in RE-FX and use the same number range, however you can use BAdi to assign the required number to PS or RS.
RECACUST--> Master Data --> Usage View --> Rental Object--> Implement Enhancements (BAdI) --> Number Assignment, Validation, Substitution.
Kind regards,
Kishore -
/RPM/ITEM_MODIFY is not taking custom number range for external ID during creation
Hi Experts,
I face an issue in trying to create projects through file using /RPM/ITEM_MODIFY.
I have been successfully able to create both item and project but it somehow is not taking the external number range for project ID that we had defined for the item type. It takes the SAP standard number for Project ID (external ID). I want the FM to create using the external number range that we use.
Can someone help me with this?
Regards,
AmitIt is not through PS project. No linkage as we have not integrated this with PS. It is through item.. check the code. This is just to check how to create from backend. This is where we don't get our custom project id. it takes sap project id.
DATA : ls_item_context type /RPM/TS_ITEM_CONTEXT.
DATA : ls_attributes type /rpm/ts_item_d_api.
data : ls_GUID Type /RPM/TT_GUID .
data : ls_detail_guid type /RPM/TT_GUID.
data : l_rc type i.
data : lT_ATTRIBUTES TYPE /RPM/TT_ITEM_D_API.
data : LV_NRLEVEL type NRLEVEL.
data : Lv_NRLEV type char20.
ls_item_context-CREATE_CPROJECT = 'X'.
ls_item_context-CPRO_TEMPLATE = '45A24B95FB43010200000000837FF54C'.
ls_attributes-portfolio_GUID = '456C418E3AED018800000000837FF54C'.
*ls_attributes-EXTERNAL_ID = '102680'.
*ls_attributes-parent_GUID = '4576F8DCF90B01F800000000837FF54C'.
ls_attributes-parent_GUID = '4717C6437A8D010A00000000837FF54C'.
ls_attributes-Proj_description = 'NEW TEST'.
ls_attributes-item_type = 'ZPEP_PT_31'.
*Select single NRLEVEL into lv_nrlevel from NRIV where OBJECT = 'ZPEP_NPO'.
*lv_NRLEVEL = Lv_NRLEVEL + 1.
*lv_NRLEV = lv_NRLEVEL.
*ls_attributes-EXTERNAL_ID = lv_NRLEV.
APPEND ls_attributes to lt_attributes.
CALL FUNCTION '/RPM/ITEM_MODIFY'
EXPORTING
IV_LANGUAGE = 'EN'
IV_CHANGE_MODE = 'C'
* IV_COMMENTS =
* IV_SHORT_TEXTS =
IS_MODIFY_CONTEXT = ls_item_context
IMPORTING
EV_RC = l_rc
TABLES
IT_ATTRIBUTES = lt_attributes
* IT_ACLS =
* ET_MSG =
ET_GUID = ls_GUID
ET_DETAIL_GUID = ls_detail_guid
If sy-subrc = 0.
CALL FUNCTION '/RPM/SAVE_CHANGES'
* EXPORTING
* IV_CHECK_ONLY = /RPM/CL_CO=>SC_FALSE
* IV_REMOVE_OBJECTS =
* IMPORTING
* EV_RC =
* ET_MSG =
if sy-subrc = 0.
endif.
endif. -
Number range for trans./event type WA in year 2011 does not exist.
hi experts while stock posting iam facing this problem kindly guide me
Hi akreddi,
Please search the forum you will find the answers before posting the thread
Number range for trans./event type WE in year 2011 does not exist
no range for trans/event type WA in year 2011 does not exist
Regards
Pradeep -
Number range for trans./event type WE in year 2008 does not exist ?
Hi,
When I post goods receipt ( MIGO) I got the error :
Number range for trans./event type WE in year 2008 does not exist
When I modify with OMBT ==>
1999 0002000000 0002999999 0
2008 8000000000 9999999999 8000000000
But I still get the same error , So Could you please help me this ?
ThanksHi
With the present settings, you can post the docuemnt in the year 1999 witout any error. But, if your requirement is to post to the current period then you have to maintain the company code for materials for this period.
To maintain the company code, go to transaction MMPV and enter the company code as 0001, posting period as 05 and year 1993. Once the transaction is complete, again enter for 06/1993. You need to execute the transaction month wise from 05/1993 to 06/2008.
Alternatively, you can create an LSMW for the same and maintain the company code.
Finally check whether the period 06/2008 is appearing in OMSY transation.
Regards,
Sunil.K
Maybe you are looking for
-
I just got a Macbook Air running 10.8.2 and an iPad Mini. I downloaded Pages for both. I created a document in pages on the MBair and tried to save it to the iPad Mini so I could work on it while commuting and the file does not show up on the mini. I
-
How to I eliminate space in my start up file so I can increase more space to add onenote?
how to I eliminate space in my start up file so I can increase more space to add one-note?
-
Problem recording sound w Radeon 9000
Help! Hopefully my system specs will be in the sig. When recording using ATI VCR the sound gets louder and softer. It "pumps" or "breaths". Also the max res the new computer can record without droping frames is 640 by 480 and to do that I've gotta tu
-
SSH Differences between Solaris 9 and Solaris 10
I use public key authentication when connecting via SSH but have noticed a difference between Solaris 9 and Solaris 10 and wondered if it's an environment setup issue. I keep my keys in $HOME/.ssh When connecting from Solaris 9 I can provide an ident
-
WEB Application security don't work properly with adf faces
We introduce conventional web security in our java ee application integrating ui as adf faces. We got problem when we access protected jspx document. It seem the container don't ask the user to log on when the page did not contains any link with the