Correction and Transport Systems

Hi all,
I am Arun Pandey from India. I have a proble with CTS. The question is given below:
When a program is created and need to be transported to production does selection texts always go with it? If no how do you make sure? Can you change the CTS entries? How do you do it?
Please guide me.
Regards,
Arun

Hi Arun,
I do not think we need transport system to achieve this though that is a possibility too.
1) When you change the selection text of a program, activate it at the text maintenance screen itself, it would be included in the open transport
2) If not, after changing the text, go back to program and save the program without making any changes and then activate the program, you would see both text and progran items in the pop-up. Click on both and activate it
You may have missed it, that's why you dont see it in the target system.
Cheers
Raj
Reward points if helpful

Similar Messages

No administration authorization in Change and Transport System in CHARM

Hi guys,
I am currently working for CHARM implementation for ECC 6.0
now my problem i created an urgent correction and i released the transport request successfully, but when i try to execute the Pass correction test action it is saying that No import into test system has taken place yet. then i went to task plan and checked there in quality system it is saying No administration authorization in Change and Transport System.
So i asked my basis team to assign the S_TMW_IMPORT profile to user TSADM in 000 client of quality system and additinally our basis team has assigned S_CTS_ADMI. authorization object to TSADM user ID in 000 client of quality system. But SAP has suggested to assign S_CTS_IMPALL and S_CTS_IMPSGL authorization profile to S_CTS_ADMI.
But the problem is S_CTS_IMPALL and S_CTS_IMPSGL authorization profile is not available in 000 client of quality system.
Kindly give your valuable inputs as early as possible. the solution provided by anybody will be rewarded with points.
Thanks&Regards
Raju

can you try assigning the below profiles to that ID.
S_TMW_OPERA
Operator in CTS (All Transport Authorizations)
S_CTS_ALL
Transport system: All authorizations
S_CTS_DEVELO
WBO: Profile for developers in P systems (incl. tasks)
I too have checked and i did not come across the profiles nor objects S_CTS_IMPALL and S_CTS_IMPSGL .
Where did u get the message that they have to be imported ?
Hope it helps.
Award points for the replies that are helpful to you.
Rgds,
Sri

Change and transport system not configured

hi
Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
How to fix this?
i appreciate your help in advance. Thanks
Madhu

Hi
After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
STMS is mainlly used for moving objects from one system to other system
Regards
kiran kumar.v

Put on a new Firefox persona, but several sites didn't work with it, so I changed back to my previous persona. But now neither my Yahoo mail nor my GoDaddy mail works correctly, and Windows System Restore didn't help. How can I fix it?

Windows 7 system... everything was working correctly before the new persona. I have scanned and cleaned out my cache; no problems or viruses.

Actually, I've solved the problem. It wasn't the Persona at all. I got a clue that someone else had the same problem after using CCleaner, and I had just done the same thing. My problem was corrupted cookies. I tried several fixes - nothing worked - so I just ran CCleaner again, and it straightened everything out.

Vesrion control and transport system

Hi all,
how version control works in XI..i know we have history for each and every objects in IR and D.but if something is went wrong and i want ton activate older version is that possible thorugh this history or we have to develop any other process to activate older version obejct..
Transportation also..i am following file system transport ..if we want follow that track how can we do that..
thansk for your time..
Regards
Rao

Hi,
Yes you can activate any old version from history. Just open old version click on edit and then save and activate again (you can add single space in description to enable save button).
You can also open old transport object and activate like stated above but I am not sure if you activate whole transport.
May be you can find old import files in "Imported" folder on Os level and you can copy it back in "Import" folder to import it again.
Regards,
Gourav
Reward points if it helps

OLAP Variables and transportation system

Hi,
When I transport a variable from the development system to the production system, SAP transports not only the definition of the variable but the current content of it.
In our case this is an odd and dangerous behaviour: I have some OLAP variables defined which their values are used to know what data to load in next load process (they are parameters for InfoPackages and DTS processes). So, if someone transports a variable it will overwrite the current content of it and some data can be lost or loaded again.
This is what happened us few days ago. Someone transported a variable from the developement system and SAP used the current value copied from the development system (and not from the production on) to load and manage data.
I posted a note to SAP Support System and they said that this is the standard behaviour of it.
a) Do you think that this is a normal behaviour?
b) Do you know any method to avoid developers to don't transport variables to the production system by accident ?
Thank you
Ramon Roura

Look at following link:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/44/b4a2bc7acc11d1899e0000e829fbbd/frameset.htm
In case, it's a fresh installation, then just run the command "STMS". This will recognise that there is no configuration and it will ask you for inputs. Kindly input the domain controller details and you will be able to set the basic configuration for transport management.
Also, check the following links:
http://help.sap.com/printdocu/core/print46b/en/data/en/pdf/BCCTSTMS.pdf
Regards,
Gauravjit.
Reward points if the solution is helpful

Object locked after Release and Transport to QAS/PRD

During an attempted recovery of our DEV system, a tranport request that had been previously released and transported to QAS/PRD was copied back into the DEV system, over-writing an open change request (and associated lock) on the program.
As a result the object shows as 'Locked' in DEV, but the lock entry is on a 'Released' transport.
I have reviewed tables E070 and E071, and as expected the entries for the program show that the transport was released.
Table TLOCK contains an entry for the program indicating that it is locked under the change request described above, that has already be released.
I logged a message with SAP, and was directed to create a new change request and assign the program to that request. While this does work, and allows me to make corrections and transport them, it does not assign a lock to the new transport, and does not clear the existing lock.
The other comment in the message was that once a transport is released, the only other option is to 'hack the tables', but I am not sure I am ready to go that route.
Has anyone ever encountered this situation, and if so, do you have any situations as to how to clear the lock entry ?
Thanks in advance for any assistance you can provide.
R. Runtz
SAP Support, Government of Manitoba

Hi Robert
You can unlock objects using transaction SE03:
SE03 > Requests/Tasks > Unlock Objects (expert tool)
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

What's the difference between transport route and transport layer

what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

Hi,
Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development
    work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport
    layer.
    The transport layer determines whether objects are assigned to a local
    or transportable change request.
Use
    Each of your SAP development systems is assigned a transport layer as
    its standard transport layer. If you use Extended Transport Control, you
    can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System
and transport layer.
When you create a package, it is assigned the standard transport layer
of the SAP System.
If you want to assign a different transport layer to a package, you
require the administration authorization for the Change and Transport
System.
The objects in a package automatically have the transport attributes
defined for the corresponding transport layer.
o   If a consolidation route originating in their SAP System is defined,
     then the objects are assigned to a transportable request, and
     transported into the consolidation target when it is released.
o   If a consolidation route is not defined, the objects are assigned to
     a local request, and are not transported.
Customizing settings are not assigned to a package. They have the
transport attributes of the standard transport layer of the system or
client.
It is best to assign a package a standard transport layer for which a
consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the
Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
     The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
     Release 4.0A and cannot be maintained.
Regards
Ben

Alternate development landscape and transport path - release management

We are discussing a proposal within our company to build a landscape that includes separate clients and transport paths for development of new system enhancements vs. ongoing production support. The idea is to keep all new development in a separate stream and prevent any conflicts with any required production support changes. This approach was used on a project where I previously worked, and we are seeking input from other SAP shops that use this approach, as well as any best practice documentation to assist us in development of an internal proposal on the topic. I would be grateful for any input on this topic, as well as the topic of release management. I have done quite a bit of searching on SDN and BPX and am just not finding anything.
Note that I also posted this question in the BPX general discussion forum because I was not clear exactly how it should be categorized. I apologize if this was not the appropriate course of action.

Hi Bob
without being an expert. You could check the documentation for "Change and Transport System" (CTS) in help.sap.com. It comes with some "strategic" information as well.
The CTS "belongs" to SAP NetWeaver, and an extended version is available "CTS". Further recommendation would be that you check out the SAP Servicemarketplace information for SAP NetWeaver for "CTS". The use of such large functions is normally described in presentations as well.
regards
Andreas R

Documents of Transport system

hey guys,
I need documentation about usage of Transport management system.i want to know more knowledge of understanding the Transport system proceduces and what should be taken care while transporting etc..
explaining the STMS tr-cd and SE10 also necessary to know.
if anybody can guide me would be appreciated.
ambichan.

<a href="http://help.sap.com/saphelp_47x200/helpdata/en/d7/8eb9361a75ea43e10000009b38f839/frameset.htm">Change and Transport System - Overview (BC-CTS)-Click Here</a>
Very informative and contains the links to all the tools
e.g.
STMS - Transport Organizer
Rishi

Creation and transportation of query from development to simulation system

Hello experts,
I need to create a new Query in the development system in the General Ledger folder in Financial reporting. and then I need to transport the same to the simulation system. what are the correct steps I need to follow to do the same if have to avoid any issues during this transportation.
Do I need to do any modifications to the role ZS_XX_BEX_MENU and transport the same?
Could anyone help me in this regard giving me the exact procedure I need to follow.
Regards

No need to modify, but if it is $temp then change it has ur won request.
follow the genral procedure
1)In RSA1 Go to Transport tab and collect ur query.
Drag to right screen
If it is in $Temp change it to your own request. For this You may need Access.
2)Query contains all objects which were used in that query.
if any Info object that are created newly then check for Transport
3) Then, finally click on transport(Truck) icon
4) By default, it will collect all new objects including newly created Info Objects also. You can change the collections of your own selection.
You will get a Request Number here. Please save this Number so that you can check this at SE09
5) In SE09 search for your Request Number.
6)Release The request by subsequent process onwards( Means sub contents like infoprovider first and then Query)

The Apple trackpad won't except the "pinch open and close" command on Firefox version 4. It is configured correctly in the system preferences. HELP!

I am using the Apple trackpad with Firefox version 4. The trackpad won't "pinch open and close". It is configured correctly in the system preferences. It also worked in version 3. Anyone have any suggestions?

Do the related browser.gesture prefs on the about:config page still have a value set for those gestures?
Which Firefox function should be performed with those gestures?
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Probelms while replicating Data Source and transport into test system

I find the following error messages whilre transporting into test system.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Mapping between data source 0EC_PCA_1 and source system is inconsistent.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
any ideas please..........
Enhanced the Extract structure and activated the data source in Source system
Replicate the Data source in BI and install the Infosource through BI Content activated and transport them to Test system.

Hi,
1.First transport the data source from R/3 dev to R/3 quality
2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you data source may not appear)
3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
activate these info objects and collect in another request
4.transport these info objects from BI dev to BI quality
5.transport entire data source to bw quality.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is

hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).

thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample>

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired. I erased the drive and restored system back to the previous day.

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired (errors were associated with boot drive) I erased the drive and restored system back to the previous day. Has anyone else experienced this problem?

Since it's a new machine, contact Apple's Support and let them deal with it. Allen's already recommended an Apple repair station visit. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you might be eligible for an onsite repair since yours is a desktop machine (depends on where you're located). BTW, the AppleCare Protection Plan's the best warranty policy available for desktop machines. Get it if you don't have it before contacting Apple.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

Correction and Transport Systems

Similar Messages

Maybe you are looking for