Correlating on Directory problem

Dear All,
I have some strange problem with correlation. In BPM there is a fork with 2 recieve steps which are recieving filea.
If I correlate on Directory every time a new instance of BP is created (even is the files where form the same directory(in CCs the Directory checkbox is also marked)). Then I tried to change the correlation to SenderService and it works perfectly, as the files come from one Sender than no new instances of BP are created.
Any ideas what can be wrong with directories? (I have checked in XML Dynamic Configuration and the Directory names are for sure the same, but the correlation doesn't work).
Best Regards,
Artsiom Anichenka

From what I've seen, there is really a bug there.
Even though you are able to select ASMAs in the expression editor of the correlation editor, they won't be filled by BPE. I'd say to raise an OSS.
Meanwhile, if you need to make the scenario work right away, you should extend your data type to contain the directory in the payload (and fill it with dynamic configuration in a mapping).
Regards,
Henrique.

Similar Messages

ITunes Directory Problem

I recently installed Windows Vista Service Pack 1 on to my laptop. After the install I can't open itunes. Now, I uninstalled service pack 1 and uninstalled Quicktime and iTunes. Now, after downloading the newest version of iTunes...it seems I have a directory problem.
The error msg reads: An error occurred while attempting to create the directory: C:\ProgramData\Apple Computer\Installer Cache\QuickTime 7.50.61.0
It was also saying the same thing about iTunes directory. I talked to people from apple and microsoft...nobody has an answer. I need help!
Thanks in Advance,
Adam

I agree that this is a huge problem. If the network directory isn't immediately found, iTunes reverts to its default. There may be other conditions under which this happens as well because it sometimes seems to occur even when the network drive should be visible. It causes huge headaches. My wife wants me to nix the network drive and just put all our music on our laptop--which is not something we should have to do in this year of 2007. They need to fix this. iTunes made my wife cry.

Applet default directory problem

Hi,
I have a directory problem when my applet write a file on client box (permissions OK),
the directory is always the window desktop!!!!
Is there a method to change the default directory??
Thanks for your time,
JC2001

Hi,
Applets loaded into a Java-enabled browser can't write files.
Sun's appletviewer allows applets to write files that are named on the
access control list for writing. The access control list for writing is
empty by default.
You can allow applets to write to your /tmp directory by setting the
acl.write property in your ~/.hotjava/properties file:
acl.write=/tmp
You can allow applets to write to a particular file by naming it
explicitly:
acl.write=/home/me/somedir/somefile
Use : to separate entries:
acl.write=/tmp:/home/me/somedir/somefile
Bear in mind that if you open up your file system for writing by
applets, there is no way to limit the amount of disk space an applet
might use.
I hope this will help you.
Thanks
Bakrudeen

SharePoint Foundation Active Directory Problem

Hey,
I have a problem with the Active Directory connection to SharePoint Foundation.
My Situation looks like this:
I'm working on a kind of project controlling plattform. Each of our customers has its own site. Also each customer has an account in our Active Directory. For the administrative part, we have a list which contains some infos of the customer, the url to its
site and the contact person.
I wrote an import-script which creates a site and a new item in the list. To put the contact person in the list-item, I use a code-snippet like this:
try
user = web.EnsureUser(loginName);
catch (Exception ex)
throw new Exception("LoginName " + loginName + " not found");
Now the problem is, that the try/catch block fails too often which means: SharePoint doesn't know the loginNames of some of our customers.
Why does SharePoint not know maybe 1/5 of all our customers? All of them have an account in our active directory, none of them ever logged in the SharePoint (at the time they even doesn't know, that they have a SharePoint site for this project).
I searched the internet for the problem but all I found where questions related to the synchronization of ad-properties to SharePoint Foundation. But I don't want to sync the phone-number or something like that - I want SharePoint only to know all the loginNames
of our customers, not only 1/5 of them.
How do I achive this, what am I doing wrong?
Thank you!

web.EnsureUser has nothing to do with the UPS at all. This has nothing to do with synchronisation (it does have a role but it's a maintenance one and nothing to do with authentication.
The simplest answer is that the login names are being entered wrongly. Having said that there are a few areas you can look at to try to identify the problem:
Does it fail repeatedly for the same username? Can you add that user to the site manually using a people picker control and if so will the script work afterwards? Are there any trends in the user accounts that SharePoint cannot find?

10.4.6 and Active Directory Problem - Volume cannot be found??

I have bound six 10.4.6 to active directory. All went sweet with no problems. I have "force local home folder" off in Directory Access for AD. I can login to the Mac no problem using any user account from AD. If I login with a user the first time all goes well. The desktop icons show and the home directory is that of the users network home folder and can browse it. All good until I log out and login again. I get the desktop icons but the users home directory give the error "The Volume for %username% Cannot be found" when trying to access. I can browse the network to the user home folder without having to authenticate. The server (2003) shows no login errors, all looks fine. I have upgraded one Mac to 10.4.7 but made no differnce.
I have installed "services for Mac and Appletalk" on the server but from what I have been told this shouldn't need to be installed but I did as I was getting no where anyway.
Any ideas?
PowerPC Mac OS X (10.4.6)

Hi Chris!
Before I comment, I want to define a couple of things. A "Mac home folder" stores a user's files (Documents, Library, etc.). This home folder can be stored locally on the workstation or it can be stored on a server. A "Windows home folder" is defined in a user's Active Directory account and can be used as the Mac home folder or simply as a network user folder for storage.
While the idea of a network-based Mac home folder is nice, it can be clunky simply because the entire user experience is dependent on network speed and/or good file synchronization between your server and workstation. As someone who works in a group supporting about 300 Macs, I suggest enabling local home folders and not using a network-based Mac home folder.
Next, File Services for Macintosh (AFP protocol) built into Windows Server will not support network-based Mac home folders. This is a dead end. You can install a third party product from Group Logic called ExtremeZ-IP, which does support network-based home folders over AFP.
Therefore, what's happening in your network is that the network-based Mac home folders are being mounted via the SMB protocol, which uses Windows style file sharing. SMB in Mac OS X is good for limited use but I wouldn't recommend it for extensive use, which would include network-based Mac home folders.
Here's what I suggest for your AD settings: 1.) Enable local home folders. 2.) Connect via SMB. This will keep your users' Mac home folders local to the machine but if their Windows network home folder is properly defined in their AD account settings then these should automatically mount on the Desktop via SMB at login.
If you can get your Windows home folders to mount automtically on the users' Desktops then you can experiment with synchronization. After logging in, each user can visit Apple menu --> System Preferences... --> Accounts and the synchronization options will be available. A user can synchronize all or part of his local Mac home folder to his mounted Windows home folder.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.7)

10.5.5 Active directory problem for mobile users

I an running 10.5.5 on a MBP 2.4. The computer is attached to Active Directory for authentication. The accounted is setup as a mobile user with automatic home sync. Below is the problem I'm experiencing after 10.5.5.
Upgrade worked fine, everything went through as expected. When I got home with computer, couldn't login. I did eventually get logged in, computer became extremely unresponsive at intermittent times.
At work next day, everything worked fine.
I believe this is a problem with 10.5.5 computers that are bound to AD, when AD is not available (but internet is.) Some type of weird priority locking or timeout setting? It seems to fail immediately if no network is available, but if the internet is available it is like it gets "hung" waiting for a response.
Anybody else having similar problems?
Below are the details on the specific tests that brought me to this conclusion.
1) Boot with work network cable connected - Works fine
2) Boot with work wifi network enabled - works fine
3) Boot with public wifi network enabled and work cable - works fine.
4) Boot with only public wifi - appears "frozen" (turned off after 5 minutes of trying to login)
5) Boot without network or wifi - works fine using cached mobile account info
6) Boot with network cable and public wifi, remove network cable after login- works fine for a period becomes periodically frozen. attempts to do anything become queued, when computer starts responding queue emptys out (can see menus / applications switch around to correspond with clicks.)
7) Change account to Manual sync of mobile account, again boot with network cable and public wifi, remove network cable- no freezing responds normaly.
All steps repeated after rebinding computer to AD - same results.

First rule of installing an upgrade, run permissions repair both before & after. Did you do that?
I'm using a Mac dual bound to AD & OD, works perfectly. I can't speak for the exact setup of your network but I personally would be suspicious of AD. I had a similar issue some time back where my processor would go crazy with the net directory authentication running like crazy. Turned out AD had somehow forgotten my computer. It only happened away from work where my Mac couldn't contact the AD server (not exactly sure why). I'd try the following.
1. While at work create a local administrative account on your Mac (you should always have a backup account anyway).
2. Login as local admin account.
3. open Directory Utility from the Applications/Utilities folder & remove the AD server (you'll need an account that can bind machines to AD).
4. re-add your Mac to AD.
This may resolve your issue & shouldn't hurt anything in the least.

Binding to Active Directory Problem. I am a Newb! probably something stupid

Hey All,
Trying to get my apple xsever to join our windows domain. I got it to bind and the user accounts show up on the machine but then it askes me to join it to the Active Directory Kerberos realm. I am confused.
what i am trying to do is joint it to the windows domain for my admin account on the actual server and then set up local user accounts on the machine so when my mac users log in they authenticate using the local mac account and not the windows domain account. Does this make sense? From what i read macs authenticate using the local account before going to the windows account which is what i want. I am a total newb to this so forgive me for the stupid questions.
cheers all,
jess

Hi
set up the xserve as an Open directory Master
will it place nice on the network
with the rest of the windows servers that we have.
There should be no problem in doing this. All you need to do is decide whether you want your Mac Server to run its own DNS Service or to use the existing DNS service being provided by the AD Server. Open Directory Master requires DNS Services running somewhere.
i just want to have a mac studio of about 35 people be
kind of an island within a sea of windows users. If
there can be cross over there then fine.. but really
i want the mac to work well with the apple server and
if i can get the windows clients hooked up also then
fine.
There should be no problem with this.
When you say studio do you mean a graphics design studio? Or are you talking about a video production studio? If the answer is yes to either one or both then perhaps a simple file server would do. An Open Directory Master is OK in this environment but your network needs to be up to job. Ideally gigabit ethernet certainly for video production and also if your studio are heavy photoshop users. You could get away with 100Base-T but with 35 heavy users editing files stored on the server as well as Home folders it may be a bit too much. If this is the situation in your studio you would be better placed working locally and saving the files back to the server at the end of the day. You would set up your users with names and passwords in the OD directory node. Your studio can use those account details to log on to the server to access share points but still work locally if they need to. If you start windows services on the mac server then there should be no reason for windows clients to access share points on the mac server as well. Be careful how you configure windows services as you already have existing PC servers on the network.
As you have already stated your aim is to keep the macs completely separate from the PCs then consider connecting all your macs to a separate switch and have them running of a different IP address range and subnet mask. You could then use an intervening router to handle traffic between the two networks, this way you control cross platform access to shared resources. If you understand networks, routers etc then you should be able to accomplish this without too much trouble. Again searching the Server forums should give you plenty of ideas and advice on the best way to achieve what you want. As ever defining and deciding what you want you want the server to do is half the problem.

Java/Active Directory problem

I have a strange problem. We have an application that we login to through a website. The application requires Java 1.42_9 to run properly. These workstations came from Dell with java 1.50_6 preloaded which I removed infavor of the required 1,42_9. Everything works normally when a user logs into the the workstation (WinXP SP2) as the local adminstrator. The problem arises when a user logs into the machine with an Active Directory account. We trying to run the website to login to our application and all we get is the Red X in the upper left hand corner of the screen. There is nothing in the Java console, it seems like java does not even attempt to start. I am not sure what Active Directory has to do with this but as long as we log in as a local admin everything works great. If I load Java 1.50_6 back on the workstation it works but it takes over two minutes for Java to load which is unacceptable. I have also tried 1.50_7 but it too take too long to load.
Sorry for the long winded post, but Im hoping someone has suggestions on why logging into Active directory causes 1.42_9 to fail.

Your problem is your use of these two combinations
constrains.setSearchScope(SearchControls.SUBTREE_SCOPE);
ctx.search("", "(objectclass=*)", constrains); Many LDAP servers, including Active Directory, do not permit subtree searches from the root.

LDAP Active Directory Problem

Hi,
i have a win 2003 server (german) and apex 3.x. I (hope i ) have read all postings to this topic. Read the Apex Book, tried the Oracle Examples but all examples i have found won´t work for me. After three hours i found one solution that works:
(Domain: marco.de)
create or replace FUNCTION check_ldap_user(
p_username IN VARCHAR2,
p_password IN VARCHAR2
) RETURN boolean IS
l_session DBMS_LDAP.session;
l_ret binary_integer;
BEGIN
l_session := DBMS_LDAP.init (
hostname => '192.168.178.100',
portnum => '389');
IF (DBMS_LDAP.simple_bind_s (
ld => l_session,
--dn => 'cn='||upper(p_username)||',cn=user,dc=marco,dc=de', /* <= This line does not work */
dn => upper(p_username), /* <= This Version work */
passwd => p_password)) = 0 AND p_password IS NOT NULL THEN
l_ret:=DBMS_LDAP.UNBIND_S(ld=> l_session);
RETURN True;
ELSE
RETURN False;
END IF;
EXCEPTION WHEN OTHERS THEN
dbms_output.put_line(sqlerrm);
RETURN FALSE;
END;
The Question is, if there any problems with a german Active Directory Server (Mayby the groups like "Domänen-Admins" are the problem)
Thanks
Marco

Hi,
Any help?

Query Active Directory + Problem with thumbnailPhoto

Hi<o:p></o:p>
I have a problem and I don’t know if it is my SQL Query, so here goes
<o:p></o:p>
I have a view on my SQL server that Queries our Active Directory. I can see that there is data in the table.<o:p></o:p>
But when I try to use the Image in some C# code I get an error on 60% of the images with the exception header missing or corrupted.
My view is built with this Query:
select
* from
openquery
ADSI,'SELECT sAMAccountName, mail, title, displayName, telephoneNumber, mobile, sn, givenName, department, thumbnailPhoto
FROM ''LDAP:[REMOVED]''
WHERE objectCategory = ''Person''
Do you have any idea where the problem is? The photos shows up fine in Outlook, SharePoint, lync etc. I’m pretty sure that the C# code works correctly. Hope you can help.
Regards
If only I had time to learn everything I wanted ...

Hi Latheesh
I've tried with this script:
SELECT ISNULL(ROW_NUMBER() OVER ( ORDER BY department ), -999) 'id' ,
CONVERT(NVARCHAR(25), givenName) AS Fornavn ,
CONVERT (NVARCHAR(50), sn) AS Efternavn ,
CONVERT(CHAR(5), UPPER(SUBSTRING(mail, CHARINDEX(mail, N'@'),
CHARINDEX(N'@', mail)))) AS 'initialer' ,
CONVERT(NVARCHAR(255), mail) AS Mail ,
CONVERT(NVARCHAR(75), title) AS Stilling ,
CONVERT(NVARCHAR(120), department) AS Afdeling ,
CONVERT(NVARCHAR(13), telephoneNumber) AS Fastnet ,
CONVERT(NVARCHAR(13), mobile) AS Mobil ,
CASE WHEN userAccountControl = 2 THEN 'Account is Disabled'
WHEN userAccountControl = 16 THEN 'Account Locked Out'
WHEN userAccountControl = 17
THEN CONVERT (VARCHAR(48), 'Entered Bad Password')
WHEN userAccountControl = 32
THEN CONVERT (VARCHAR(48), 'No Password is Required')
WHEN userAccountControl = 64
THEN CONVERT (VARCHAR(48), 'Password CANNOT Change')
WHEN userAccountControl = 512 THEN 'Normal'
WHEN userAccountControl = 514 THEN 'Disabled Account'
WHEN userAccountControl = 544
THEN 'Account Enabled - Require user to change password at first logon'
WHEN userAccountControl = 8192
THEN 'Server Trusted Account for Delegation'
WHEN userAccountControl = 524288
THEN 'Trusted Account for Delegation'
WHEN userAccountControl = 590336
THEN 'Enabled, User Cannot Change Password, Password Never Expires'
WHEN userAccountControl = 65536
THEN CONVERT (VARCHAR(48), 'Account will Never Expire')
WHEN userAccountControl = 66048
THEN 'Enabled and Does NOT expire Paswword'
WHEN userAccountControl = 66050
THEN 'Normal Account, Password will not expire and Currently Disabled'
WHEN userAccountControl = 66064
THEN 'Account Enabled, Password does not expire, currently Locked out'
WHEN userAccountControl = 8388608
THEN CONVERT (VARCHAR(48), 'Password has Expired')
ELSE CONVERT (VARCHAR(248), userAccountControl)
END AS 'Disabled' ,
CONVERT(NVARCHAR(75), givenName + ' ' + sn) AS 'DisplayName' ,
CONVERT (VARBINARY(MAX), thumbnailPhoto) AS 'Photo'
INTO ##adTemptable
FROM openquery
ADSI,'SELECT sAMAccountName, mail, title, displayName, telephoneNumber, mobile, sn, givenName, department, thumbnailPhoto,userAccountControl
FROM ''[REMOVED]''
WHERE objectCategory = ''Person''
WHERE department IS NOT NULL
But i still gets the same error on MANY rows
OLE DB provider 'ADsDSOObject' for linked server 'ADSI' returned truncated data for column '[ADsDSOObject].thumbnailPhoto'. The actual data length is 6846 and truncated data length is 4000.
OLE DB provider 'ADsDSOObject' for linked server 'ADSI' returned truncated data for column '[ADsDSOObject].thumbnailPhoto'. The actual data length is 7006 and truncated data length is 4000.
OLE DB provider 'ADsDSOObject' for linked server 'ADSI' returned truncated data for column '[ADsDSOObject].thumbnailPhoto'. The actual data length is 6496 and truncated data length is 4000.
If only I had time to learn everything I wanted ...

Solaris 10 Active Directory problem

I've been battling through the integration of Active Directory on our Solaris 10 systems, and have reached another brick wall. I am able to getent passwd <user> and kinit <user> without any problems, but any attempt to su or login via SSH shows the following:
Apr 14 10:34:26 eddie su: [ID 537602 auth.error] PAM-KRB5 (auth): krb5_verify_init_creds failed: New password cannot be zero length
Using Samba version 3.0.23b, connecting to Windows Server 2003, with SP1. I've tried various fixes, tried installing and uninstalling other versions of ldap, pam, and krb5.
If anyone could shed some light on this error, it would be much appreciated.
Cheers,
Dave

have you checked this link?
http://www.sun.com/bigadmin/features/articles/kerberos_s10.jsp?cid=e5595

Yet another active directory problem

Hi,
I'm trying to bind a few Macs in my Windows 2003 Active Directory Domain, they're the first that comme with Lion 10.7.2 out of the box. I'va had my share of problems with AD binding of Macs, but I already have a lot of 10.6.8 Macs, and a few other that got upgraded from 10.6 to 10.7 without much problems and those work fine with my AD.
That, of course, couldn't last and I now have a new problemes with my 10.7.2 Macs. The binding process in itself seems to work fine, I've got the green light in front of my AD domain and I can log with my AD accounts on my Macs. The problem start when I try to access the directory utility to change the default settings for "active directory" (any settings will do, create mobile acount for example) : this creates another AD binding in "network account server", I can still login with my ad accounts but none of the settings I set in the directory utility are effective.
Both of those AD binding are shown with a green light, but the second one has a comment stating that it is not present in the auth scope rules. My AD DNS domain name is something like "domainname.com" (no .local), but the short netbios name is something like "dom" : the original AD binding on my 10.7.2 Macs is "dom", and the one created after I change some settings is "domainname". On my other Lion or SL Macs correctly joined to my domain, the domain only appears with the name "domainname" : it seems that for some reason Lion is now troubled by the fact that my netbios name is not the dns name minus the extension...
If I unbind one of my correctly working upgraded 10.7.2 Macs, it exhibits the same issue when I try to rebind it.
Does anyone else has a similar AD configuration, and does it work with 10.7.2 ? Does anyone has any idea of how to work around it ?
Thanks

Hi there,
I have experienced the same problem with Macs in my Windows environment. I have found a work-around for it, but it is a little bit tedious. What I have found is that if you reinstall Lion (10.7 or 10.7.1) and bind it to the domain before patching to 10.7.2 it will bind correctly with only one entry in the network account server dialog. From there you can updagte to 10.7.2 and it will work correctly. There is a catch, though. If for any reason you need to unbind the machine from the domain, you will run into the same problem when you try to bind it again. I know it is not much of a fix, but it is what I have been doing to get around the problem. I hope this helps you out.
Regards

Active directory problem ?

i have installed a brad new Xserver Intel Xenon dual core with 10.4.8, and i have manged to get the computer connected to our windows 2000 AD it´s on a windows 2003 server but the ad is in 2000 mode, and kerberized it, and the server is a domain member. I have populated the local group with AD users, and i have no problem to logon from our macs, but when i try the same account from one of the pc´s with XP sp2 they can´t logon, and i get the logfile like this. If i logon with a local server account from the pc there is no problem.
NTSTATUS_WRONGPASSWORD
User "davidedlund" failed to authenticate with "dsAuthMethodStandard:dsAuthSMBNTKey" (-14090)
checkntlmpassword: Authentication for user [david.edlund] -> [david.edlund] FAILED with error NTSTATUS_WRONGPASSWORD
netbios connect: name1=FILSERVER name2=DAVIDXP
netbios connect: local=filserver remote=davidxp, name type = 0
User "davidedlund" failed to authenticate with "dsAuthMethodStandard:dsAuthSMBNTKey" (-14090)
checkntlmpassword: Authentication for user [david.edlund] -> [david.edlund] FAILED with error NTSTATUS_WRONGPASSWORD
netbios connect: name1=FILSERVER name2=DAVIDXP
netbios connect: local=filserver remote=davidxp, name type = 0
User "davidedlund" failed to authenticate with "dsAuthMethodStandard:dsAuthSMBNTKey" (-14090)
checkntlmpassword: Authentication for user [david.edlund] -> [david.edlund] FAILED with error NTSTATUS_WRONGPASSWORD
Macbook Pro Mac OS X (10.4.8)
Macbook Pro Mac OS X (10.4.8)

If you completely remove it from your forest and partitions Yes that is possible. I have included some more links for you.
How to remove data in Active Directory after an unsuccessful domain
controller demotion
Active Directory – Remove a Domain Using NTDSUTIL
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Host Directory Problem

Using Dreamweaver CS4, trying to upload first web site, having a problem
when I put public_html in host directory...because dreamweaver then inserts
a / , therefore looks like public_html/ and the file will not upload onto the public register.
Have asked my host company for help...but they keep saying I should drop the / and then
everything will OK....but I'm not typing in slash / ..........dreamweaver is doing it itself.
Can anybody help please?
Thankyou

Are you sure your ftp settings point to the right folder on the hosting server?
For instance if I have an ftp adress called ftp://www.mydomain.com but the root folder for my website is wwwroot I should set that directory in the ftp dialog of the website settings.
So the ftp settings of my site will be something like:
FTP server : ftp://www.mydomain.com
rootfolder: wwwroot
password: mypasword
login name: my_loginname
M.R.Biesheuvel
www.sportjegeestgezond.nl

Integration directory problem while creating business service

HI,
CURRENTLY I AM FACING A PROBLEM IN INTEGRATION DIRECTORY. WHEN I TRY TO CREATE A BUSINESS SERVICE INSIDE THE SERVICE WITHOUT PARTY WHICH I AM TAKING AS A SENDER, I AM UNABLE TO GET THE SOFTWARE COMPONENT VERSIONS IN THE SENDER PARAMETERS.
IF ANYONE CAN GIVE THE COMPLETE CONFIGURATION STEPS FOR SENDER AND RECIEVER SYSTEM THAT WILL BE VERY HELPFUL.
BEST REGARDS,
MONA

Hi Mona,
Let me explain you in detail:-
First, Activate the Change List in the Integration Repository once the design objects are complete. By activating the change list, the object becomes available for Configuration in the Integration Directory.
Secondly, to transfer Integration scenario from Integration Repository - you need your Integration Scenario to be created correctly and when you run this wizard you actually pull the Integration scenario in the Integration directory.
You also have the option of 'Configuration Wizard'.
This tool is a wizard for creating your Recevier Determination, Receiver Agreement, Sender Agreement and Interface Determination. For this tool, you do not need the Integration scenario
It is not mandatory to use any of these tools to configure your scenario.
All you have to do for configuring your scenario is
1. Create Business system/Business service
2. Create Communication Channel
3. Create Receiver Determination
4. Create Interface Determination
5. Sender Agreement
6. Receiver Agreement
I hope this provides you a solution.
Regards.
Praveen

Correlating on Directory problem

Similar Messages

Maybe you are looking for