Correlating S_ALR_87013537 tcode to underlying report
How can I correlate the S_ALR_87013537 tcode to underlying report? I would like to change the settings on the report (using tcode cje2) , but I do not know which report is associated with the S_ALR_87013537 tcode.
I'm trying to change the "Output Type" of this report to include "Object List ALV" as a screen selection
Hi
After executing the report, there would a menu option like Extras > technical info...
With this, you can display the report form behind this T code..
Regards
Ajay M
Similar Messages
-
How to create a z-tcode for a report in FSI3 transaction
hi friends,
i want to create a z tcode for a report in FSI3 transaction, i have copied the program of the report and created a tcode in se93, but some more tabs are getting displayed in selection screen when im executing my Z Tcode, and report is not getting executed. kindly help.
regards,
nagarajan.jHi,
follow these steps:
1. enter into transaction SE43 and change any Z area menu (we won't save it anyway)
2. choose to add a new entry
3. in the popup, choose to add a new report
4. select "Drilldown"
5. the application class depends on the area from you are trying to define/launch drilldown reports. In case of transaction FSI3, the appropriate application class is "FBR FI:FIS - Balance sheet, balance sheet key figures
6. then choose the suitable report type. This corresponds to the nodes that you'll see in transaction FSI3
7. finally choose a report, and optionally a variant.
8. you'll return to the screen "Transaction code for reports" (same as in step 4)
9. expand the button to display further options
10. optionally, specify a custom transaction code and/or description
11. accept all popups. This will create the transaction
12. finally, exit and don't save the area menu
I hope this helps. Kind regards,
Alvaro -
Call tcode from alv report and passing group of values
hi all .
i want to call tcode from alv report and passing an internal table or group of values to a selection option of that t code ? how
ex. passing group of GL to fbl3n and display the detials of all .
thank youDear,
You have done a small mistake
--> rspar_line-option = 'EQ'.
rspar_line-HIGH = PDATE-HIGH.
u r passing "high" value and in "option u r passing "EQ" so how it will work!!!
So if u r passing only 1 date or more dates like 01.01.2010 , 15.02.2010 , 10.03.2010 then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'EQ'.
rspar_line-LOW = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
or if u r passing low & high date means in range like 01.01.2010 to 30.01.2010, then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'BT''.
rspar_line-LOW = PDATE-LOW.
rspar_line-HIGH = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
try above code , hope it helps...
i think u cannot use "call transaction using bdcdata" in ur case bcoz as u said in ur 1st post u want to display the details of all but still if u want to use then u should pass all parameters in loop.
PROGRAM
DYNPRO
DYNBEGIN
FNAM
FVAL
ex:-
LOOP AT GT_TEMP INTO GS_TEMP.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = 'SAPXXXX'.
bdcdata_DYNPRO = '1000'.
bdcdata_DYNBEGIN = 'X'.
bdcdata_wa-fnam = '''.
bdcdata_wa-fval = ''.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'SD_SAKNR'.
bdcdata_wa-fval = GS_TEMP-GLACCOUNT.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = 'XXX'.
APPEND bdcdata_wa TO bdcdata_tab.
ENDLOOP.
try above code if u r using call transaction...
Edited by: mihir6666 on Jul 9, 2011 3:10 PM
Edited by: mihir6666 on Jul 9, 2011 3:11 PM
Edited by: mihir6666 on Jul 9, 2011 3:13 PM -
WAD - Any way to jump from an Indicator to an underlying report
We are in the process of replacing an old Informatica reporting system with BI and we will be using WAD for dashboarding. Currently if you click on an indicator it will jump to the underlying report.
I am trying to come up with a way to allow users to jump to an underlying query from a chart object in WAD. Anyone have any experience with this? So far all I have come up with is putting a hardcoded link under the indicator. I would really like to have it available in from the context menu. Any advice will be appreciated.Coolbreeze2013 wrote:
Is their a way to cable from an iPad to a printer that does not have any connectivity?
No. -
Configure Database is getting failed under Reporting and analysis in 11.1.2.3
Hi,
When I am trying to configure the database under Reporting and Analysis its getting failed and when I check the configtool.log it says
[2014-10-16T05:33:37.446-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01107] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Running file: C:\Oracle\Middleware\EPMSystem11R1\products\biplus\database\Common\postInit.sql
[2014-10-16T05:33:37.461-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] trace: UPDATE V8_CONTAINER SET CREATION_DATE = null, LAST_MODIFIED_DATE = null where CREATION_DATE is null
[2014-10-16T05:33:37.461-04:00] [EPMCFG] [TRACE] [EPMCFG-01102] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Execute SQL: UPDATE V8_CONTAINER SET CREATION_DATE = null, LAST_MODIFIED_DATE = null where CREATION_DATE is null
[2014-10-16T05:33:37.461-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] trace: UPDATE V8_CONT_VERSION set CREATION_DATE = null WHERE CREATION_DATE is null
[2014-10-16T05:33:37.461-04:00] [EPMCFG] [TRACE] [EPMCFG-01102] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Execute SQL: UPDATE V8_CONT_VERSION set CREATION_DATE = null WHERE CREATION_DATE is null
[2014-10-16T05:33:37.477-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] trace: UPDATE V8_CONT_VERSION set LAST_MODIFIED_DATE = null WHERE LAST_MODIFIED_DATE is null
[2014-10-16T05:33:37.477-04:00] [EPMCFG] [TRACE] [EPMCFG-01102] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Execute SQL: UPDATE V8_CONT_VERSION set LAST_MODIFIED_DATE = null WHERE LAST_MODIFIED_DATE is null
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01104] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] postInit.sql Processed (3) Success (3) Errors (0)
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [TRACE] [EPMCFG-07558] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Called : Storage.getComponent(com.hyperion.hit.registry.ComponentType)("RA_FRAMEWORK")
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [TRACE] [EPMCFG-07561] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Called : Storage.getComponent(com.hyperion.hit.registry.ComponentType)("64711b2385581a47S60706d4c148f4212621S7cb4") : Returned RA_FRAMEWORK
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [TRACE] [EPMCFG-07561] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Called : Storage.getChildren(com.hyperion.hit.registry.Component,com.hyperion.hit.registry.ComponentType)("RA_FRAMEWORK/64711b2385581a47S60706d4c148f4212621S7cb4,DATABASE_CONN") : Returned 1
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] trace: This is not datasource db component. Doing clean up now.
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01110] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] remove old link only
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: Removing link from RA_FRAMEWORK ( 64711b2385581a47S60706d4c148f4212621S7cb4 ) to DATABASE_CONN (64711b2385581a47S615148421490d7dbbddS77a8)
[2014-10-16T05:33:37.508-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01112] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] Create new database component and link it
[2014-10-16T05:33:37.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: Storage.getComponents(com.hyperion.hit.registry.ComponentType)(DATABASE_CONN)
[2014-10-16T05:33:37.508-04:00] [EPMCFG] [TRACE] [EPMCFG-07561] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Called : Storage.getComponents(com.hyperion.hit.registry.ComponentType)("DATABASE_CONN") : Returned 10 component(s)
[2014-10-16T05:33:37.571-04:00] [EPMCFG] [TRACE] [EPMCFG-05955] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Setting link. Parent: id [RA_FRAMEWORK/64711b2385581a47S60706d4c148f4212621S7cb4], componnet type [RA_FRAMEWORK]. Child: id [customURL:HRA/64711b2385581a47S615148421490d7dbbddS77a8], component type [DATABASE_CONN]
[2014-10-16T05:33:37.602-04:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Error: [[
com.hyperion.cis.config.ProcessingException: Failed to configure HPSU component: {0}, {1}
at com.oracle.reportinganalysis.config.RADBConfigurator.configure(RADBConfigurator.java:57)
at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:650)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:296)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:92)
at java.lang.Thread.run(Thread.java:662)
All the required tables got created the Schema(SchemaName: HRA) but still the database configuration is getting failed.
All Other hyperion products got successfully configured.
Regards,
VJ.Hi Nowshad,
Thanks for your reply.
I have did that couple of time but still getting the same above message. I have also followed the below document from metalink but still no luck.
Reporting And Analysis Configuration with New Database Fails (Doc ID 1482499.1)
I am not sure what I am missing.
Regards,
Vijaya Krishna. -
How to Skip/delete line under report name
Hi,
How to delete line under report name
Thanks,,Hi,
Edit The Title View and goto Format Title View just near to brush symbol ie above the word Title
Border -> Position -> None
Thanks,
Balaa... -
Performance issue in correlation with hidden objects in reports
Hello,
is there a known performance issue in correlation with hidden objects in reports using conditional suppressions? (HFM version 11.1.2.1)
Using comprehensive reports, we have huge performance differences between the same reports with and without hidden objects. Furthermore we suspect that some trouble with our reporting server environment base on using these reports through enduser.
Every advice would be welcome!
Regards,
bsc
Edited by: 972676 on Nov 22, 2012 11:27 AMIf you said that working with EVDRE for each separate sheet is fin ethat's means the main problem it is related to your VB custom macro interdependecy.
I suggest to add a log (to write into a text file)for you Macro and you will se that actually that minute is staying to perform operations from custom Macro.
Kind Regards
Sorin Radulescu -
No Dashboard Display under Reports and Analytics - AC 10.0
Hello,
When I try to access the Dashboard reports under Reports and Analytics menu in NWBC, I do not get any display.
Instead, I see something like x at the top left hand corner and it keeps loading indefinately.
I have instead Adobe Flash Player 10.0.....Do I need to install another software (like Crystal Reports) to have this display showing graphs and stuffs?
If yes, what other steps do I need to perform to get this graphical display out?
ThanksHi Hemant,
The user has all authorizations. I have even given the user admin right to the user.
The behavior of the explorer is as if there is a feature that is not activated or installed as it does as if it wants to open...but it now comes out with a cross like sign.
The only requirement I saw in the installation is guide is for adobe flash player which I have since installed. Are you aware of other tools to install to display analytics n reports?
Thanks! -
New Tcodes for COPA Reports from KE31
Hi All.
I have created several report for COPA from KE31. Now i want to create seperate TCodes for each report. So please kindly guide me how can i generate TCode for these reports.
I will be thankful.Hi,
Get the generated name of ur program from ur tcode.
Then goto se93
give transaction code and click create
select the second radio button(transaction code for reports)
give short description and press enter
after that give your program name
and select the gui check boxes as required for html ,java,
and save it
you can use the transaction code
REGARDS
JAGADISH -
Hi All,
I need to create Tcode for KE30 reports.Through SE93 i tried with the option transaction and parameters and activated.
The problem is, when I execute the report using tcode i'm getting the message as ' Report ZXXXXX does not exist ( refer to the long text ) ' ,
even the report existing the system.
I would be grateful if anyone give suggestion on this.
Thanks in Advance!!!I need to create Tcode for KE30 reports.Through SE93 i tried with the option transaction and parameters and activated.
Seems you did not create transaction type "transaction with parameters" but either "program and screen" or "program and selection-screen", so did you create and activate a report named ZXXXXX ?
NB: There is no "Activation" for transaction, can you elaborate once again your requirement ?
Regards,
Raymond -
Hello guys !!
We have some reportes created con transaction ke30, but now we have to use different tcode for each report. How can I assign a tcode for each report that shows ke30.
Thanks !
JavierHello specialist,
I have also the same problem.
I have a lot of reports in the KE30 but because we are going to start with authorisations.
So i want to create transactions, i go to se93:
Create new transaction entering Tcode and short text. I select: program and selection screen
Then normally i enter in the program in this case: GPD5TA0H8LQWBUW7IEULVEQ5PIC
And i save and it works, But now it is not the case.
Can anybody tell me what i am doing wrong?
Thanks, -
Nakisa embedded org chart-Team view, employees under Reporting line is empty
Hello,
I am trying to enable Nakisa embedded org chart, but when i go to Team view, employees under Reporting line is empty. And also i am not able to view the employees under Org.Unit.
Can anyone please help me with this.
Attached screen shots.
Thanks in advance.
Geohi george ,
activate the NAKISA in SICF and chk once in portal the settings and kindly configure OADP settings in MSS u can get the structure in the Team view of MANAGER heirarchy , and chk the HCM_PD_UI_1 is active in SFW5
SM30 --- V_THV_APP_C
CLICK ON Activate Hierarchy visualization option for MSSBIZVIEW AND FOLLOW BELOW THREADS
1823692 - MSS Team View isn´t displayed on the portal
MSS Team View is blank
MSS Team - On Behalf of Applications -
CISCO 2960-S/X - Packets Output in "show interface" is under reported
I have a CISCO 2960-S/X - Packets Output in "show interface" is under reported. Could I please get an explanation exactly which type of packets are being excluded from the “show interface” output packets counter. Also, is this a documented platform bug or limitation ?
Please advise.Post the output to the command "sh version" and post the "sh interface <BLAH>" of one of the "under reported" ports.
-
Is there a TCode or standard report that will provide a billing report for invoices raised during a certain period via plant and date
Hi yuvrajb ,
Go To SPRO > Sales and Distribution > Billing > Lists > Define Selection Criteria
Here Go for New Entries Give the following
SAPMV65A in the Prog Name,
7 in TRG,
K in Dis,
SELK in Event,
9 in It,
WERKS in Field Name.
Save it.
Then Goto VF05
Give the Payer (or) Material
Goto - Further Selection Criteria
Select - Plant
Give the Respective plant to which you want the Reports.
Hope this will help full. -
TCode for EWT & report RFWT0010
Dear All,
Can you let us know the T.Code for the report RFWT0010 and T.Code for EWT Configuration.
For EWT we dont want to go every time in SPRO,etc....let us know the TCODE so that we can directly open the EWT configuration area and do the settings.
Thnaks & Regards,Dear,
in the SAP Standard System there is no way to change the WT settings by a simple transaction.
As You know SAP decided to release some activities to the user under the SAP menu > Accounting>Financial Accounting>Environment>Current settings
Ather activities, as for example the WT functionality, that is linked to fiscal requirements, has to be tested before releasing it into the production System.
Therefore SAP best practises don't allow to the user to change it, before testing it; so You don't have it into the current settings.
If You strictly need Your user to do this activity, my suggestion could be to create an user profile by PFCG, and give to the user the possibility to run for example transaction sm31, to change for example the table V_T059PI content.
I hope this helps You.
Mauri
Maybe you are looking for
-
hi, can any one tell me the role of CIN in sales and distribution, if possible post some material regarding CIN configuration. my e-mail id: [email protected] thank you.
-
My OS is windows 8.1. Today when going onto itunes it asked me to update to 11.something so I dd. Now I can't access itunes at all. Keep getting an error message. error 127. I've tried repairing. Uninstalling and re installing. Can't seem to contact
-
Error relating a company code to a valuation plan
Hello, I am trying to relate my company code to a valuation plan in OAOB transaction but it appears the error AC551. I have checked it and I don´t know where could I enter the value for VAT indicator for nontaxable transactions. Could you help me wit
-
Root cause for class oracle/jpub/runtime/dbws/DbwsProxy does not exist
Hi, I am trying to use UTL_DBWS to call a webservice, adn getting a error " ORA-29540: class oracle/jpub/runtime/dbws/DbwsProxy does not exist " its going back and forth between me and operations , I aske them to load the package but still the script
-
i just updated my ipad 2 to iOS 8 and suddenly my iPad decreases in battery life instead of increase, I changed it over night but it Went down to 20%. please don't tell me I need a new cord or need to get the latest one I have gotten a new charger co