Correlation after BPM Suite FP4 applied

Hi everyone. Does anybody have a sample application or a good guide about the new correlation treatment after we applied FP4 to SOA Suite? I have found an explanation at the official documentation but I can't understand it clearly.
I followed the steps indicated in page 23-3 at: http://www.oracle.com/technetwork/middleware/soasuite/documentation/oracle-bpm-modeling-guide-ps4fp-487996.pdf
Thanks in advanced.
Edited by: Dennis Garces on 17-oct-2011 19:03

Hi Dennis,
This is exactly what i had blogged a day back.
http://beatechnologies.wordpress.com/2011/10/17/working-with-custom-correlation-in-oracle-bpm-suite-11g-ps4-feature-pack/
Hope this post helps u in understanding correlation in Oracle BPM 11g.

Similar Messages

  • Implementing Correlation in BPM 11gR1

    Hi,
    Need urgent help for implementing correlation in Oracle BPM 11gR1.
    Scenario: A busines process has various steps.When the request for the Step 1 comes, the BPMN process is instantiated which in-turn calls a sub-process that completes that step. After its completion, need to keep that thread waiting till the request for Step2 is received. When the request for Step 2 is received, need to re-start the waiting thread by corelating these two requests (Based on a unique ID).
    Now the ques are:
    1. Can we implement correlation in BPM 11gR1?
    2. If yes, how?
    3. If no, what is the alternate approach? (Think,can use BPEL corelation sets. Can anyone provide the steps for the same?)
    Any inputs around this would be really very helpful,thanks.

    Hi,
    You can achieve this behavior using BPMN, BPEL and Mediator components within a composite. We use this approach in a recent project. I wrote a new post in my blog explaining how to do that: http://blog.andrade.inf.br/2011/01/implementing-correlation-in-bpm-11gr1.html
    I hope this can help.
    Regards,
    Rafael Andrade

  • Can't logon bpm workspace in BPM suite 11g R1 PS3

    I have a very wire problem,
    I can't login to bpm workspace using the administrator "weblogic/welcome1", but I can use this logon weblogic console and em.
    check log find the following,
    initIgnoreList:Register 'oracle_ias_farm' login page url:/em/faces/targetauth/emasLogin
    m_connection-jpss null
    javax.security.auth.login.LoginException: Operation exception.
         at oracle.bpm.papi.ora.mgr.OrganizationManager.lookupParticipant(OrganizationManager.java:63)
         at oracle.bpm.papi.ora.mgr.OrganizationManager.lookupParticipant(OrganizationManager.java:43)
         at oracle.bpm.papi.ora.ProcessServiceSessionAdapter.<init>(ProcessServiceSessionAdapter.java:178)
         at oracle.bpm.papi.ora.ProcessServiceAdapter.createSession(ProcessServiceAdapter.java:146)
         at oracle.bpm.workspace.model.servlet.WorkspaceLoginServlet.initPrincipal(WorkspaceLoginServlet.java:65)
         at oracle.bpm.web.security.servlet.LoginServlet.initPrincipal(LoginServlet.java:142)
         at oracle.bpm.web.security.servlet.LoginServlet.doPost(LoginServlet.java:104)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:176)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    my env was:
    java: sun jdk 1.6.0_24
    Soa suite 11g ps3
    I create domain, select oracle bpm suite for developers template.
    I also google it, try to reset MDS and check /etc/hosts file. it's doesn't helpful.
    Any ideas?
    thx!
    /Leaf

    Hi Ravi, Leaf
    I am facing similar issue when trying to logon to bpm workspace (http://localhost:7001/bpm/workspace) after installing BPM & SOA Suite 11.1.1.4 Developers (single JVM install of AdminServer only).
    Steps I followed are-
    1.     Database is XE, I have set an environment variable to TRUE as suggested on download instructions page
    2.     Install SOA suite 11.1.1.4 by choosing the options for BPM for developers
    3.     When logging to WLS and em console with “weblogic” user, it works fine.
    4.     On the em console, I have checked and verified the “BPMWorkspaceAdmin” role exists and weblogic user is a added to the role
    5.     However using “weblogic” user, I can not login to bpm workspace (http:// localhost:7001/bpm/workspace). The server log shows-
    privilege NA resource //app/policy/OracleBPMWorkspace/null/null result ABSTAIN
    [2011-04-26T16:11:51.532+02:00] [AdminServer] [NOTIFICATION] [] [oracle.bpm.common] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: a9218d2d72883d7b:7f1352b9:12f920db316:-8000-0000000000000726,0] [APP: OracleBPMWorkspace] Operation exception.[[
    javax.security.auth.login.LoginException: Operation exception.
         at oracle.bpm.papi.ora.mgr.OrganizationManager.lookupParticipant(OrganizationManager.java:63)
         at oracle.bpm.papi.ora.mgr.OrganizationManager.lookupParticipant(OrganizationManager.java:43)
         at oracle.bpm.papi.ora.ProcessServiceSessionAdapter.<init>(ProcessServiceSessionAdapter.java:178)
         at oracle.bpm.papi.ora.ProcessServiceAdapter.createSession(ProcessServiceAdapter.java:146)
         at oracle.bpm.workspace.model.servlet.WorkspaceLoginServlet.initPrincipal(WorkspaceLoginServlet.java:65)
         at oracle.bpm.web.security.servlet.LoginServlet.initPrincipal(LoginServlet.java:142)
         at oracle.bpm.web.security.servlet.LoginServlet.doPost(LoginServlet.java:104)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    I am installing everything on a standalone laptop.
    Thanks in advance for any solution/pointers.
    Regards
    sibendu
    Edited by: user650290 on Apr 26, 2011 7:19 AM

  • Unable to access BPM composer UI despite installing BPM Suite 11g

    Hi,
    I've installed BPM suite (& SOA suite too) but even after starting Admin server and managed server (soa_server1), I'm unable to access BPM composer (I'm
    using URL similar to http://host/bpm/composer) though I can access WLS console, EM, BPM worklist application etc correctly. Just wanted to check, what else needs to be done to use BPM composer? Kindly let me know.
    Thanks,
    Harsh

    Thanks Rommel. It worked!
    PS: I've seen Composer UI working fine in other BPM installations without specifying port in URL, so I was also trying on similar lines.

  • Question on weblogic that is part of BPM suite.

    Hi Team,
    I have a requirement to work on ADF application, BPM process
    Since BPM suite comes with weblogic server, Can i use it for deploying ADF applications also.
    or do i need a separate SOA suite for deploying ADF applications
    Thanks
    Parker.

    ADF is a framework that is based in J2EE, so it'll work on any J2EE container although it is especially suited for WLS. If you're developing UIs for a BPM process (integrating it with BPM human tasks) then it would be best to work it through BPM.
    There's a create form wizard that is accessible after you open the BPM human task. It creates a project, form (jspx), task flow and BPM data controls need to integrate with BPM. The problem is that you can't test your UI using the embedded WLS contain in JDeveloper. You have to deploy your ADF UI project into a stand alone WLS and the BPM project.
    If you are doing some major UI development and the only integration with BPM are things like the action buttons, then you might consider starting with a simple ADF project without the BPM libraries. You can test your code using the embedded WLS in JDeveloper. This is only a viable approach if you can figure out how to integrate the BPM controls back into the UI later on. This is not a trivial task. There are BPM managed beans and data controls to consider. It is very advanced and not for a novice.
    HTH,
    Mark

  • HT5656 This is all great but for me the "IPv6 Delegated Prefix" field never sticks. After the reboot to apply the settings, it is empty again. I have tried the 6.2 Airport Utility on OS X 10.8.2 and the iOS Airport Utility. Any ideas?

    Hi All,
       I had a working IPv6 tunnel with my Airport Express to tunnelbroker.net using the 7.6.1 firmware.  After updating to 7.6.3, I have tried many things to get it to work and the only one that works is downgrading from 7.6.3 back to 7.6.1.  After seeing this new technical note, it appears that the root of my issue is that I can not get the "IPv6 Delegated Prefix" field to stick - it is always empty after the reboot to apply the settings.
       Any ideas?
         Thanks,
           CraigN

    I'm in the same boat with a 3rd Gen AEBS.  Only thing I haven't tried is a complete reset and reconfiguration from nothing, which I may wind up doing this afternoon just to rule it out.  The best irony of all of this is that tunnelbroker.net is under my responsibility, and I can't validate the new settings paradigm.  At least getting back to 7.6.1 is easy enough and everything works fine there.
    IPv6 Delegated prefix doesn't get saved when using the format from their example, then a 6to4 address shows up as the local address on the main Internet page, and no RAs are received once the AEBS comes back from a reload.  Something's a little off on this release.

  • Is PAPI-WS available in Oralce BPM Suite 11GR1?

    Hello everybody i need some help:
    I installed Oracle BPM Suite 11gR1 and I need to know if PAPI-WS is supported in these release.
    In case is supported i need how can I activate this service for invoke it via http(SOAP)
    The problem is I need to manage(start/stop) the processes that have bean deployed in Oracle BPM engine from a client application developed in other tecnologies
    Regards
    Y

    The reference to the Human Workflow docs is important. But it's also important to keep in mind that the architecture of 11g is different than in 10g. While you can interact with the tasks defined in a process via the Human Workflow APIs. You don't start process instances from those APIs. Please see this post:
    Re: Getting while running the BPEL process from java
    It references an ATeam example app that can start processes from a web client. But the Java APIs are described too.

  • Windows 7 crashed after Creative Suite 6 Design and Web Premium completed an update. The only Windows restore point that worked was pre-installation of CS6 software. Now when trying to reinstall I get the 'installer failed to initialize' message. Have tri

    Windows 7 crashed after Creative Suite 6 Design and Web Premium completed an update. The only Windows restore point that worked was pre-installation of CS6 software. Now when trying to reinstall I get the 'installer failed to initialize' message. Have tried using the CC Cleaner Tool but nothing works? Any solution please. Was new computer and newly purchased CS6 software downloaded 2 days prior to the upgrade.

    make sure you follow all the steps here, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Accessing dynamic configuration variables for correlation in BPM

    Hi,
    we are not able to access the runtime variables/ context objects while using correlation in BPM.
    is this the a problem with SP levels.. My server is in PI SP 9
    What might be the problem..??
    Regards,
    Rajesh

    Hi,
    Where you are not able to see the context objects???
    In ID----Receiver det or in BPM???
    Regards
    Seshagiri

  • How to extend Prebuilt SOA/BPM Suite VM domain to include IPM?

    I am using the Pre-built Virtual Machine for SOA Suite and BPM Suite 11g.  I want to extend the domain to include IPM because my BPM app needs to search and update document fields stored in the UCM repository.  When I use the Fusion Middleware Configuration Wizard to extend the domain to include IPM, it fails.
    One thing I noticed is that it doesn't recognize the existing components that are already in the domain.  For example, Enterprise Manager is not checked and grayed out as it should be.  (Maybe this is related to the fact this prebuilt VM has a "collapsed domain".)
    When I check IPM, it automatically checks "Oracle Enterprise Manager" and  "Oracle JRF" in the list.  Clicking next, it then complains of existing components (Oracle JRF), but I select "Keep existing component".  Eventually I receive this error message:
      CFGFWK-64056: There is a problem with the template!
    So, how can I get IPM working on this VM?  Or, is there another VM (or more than one) that will allow me to run SOA and BPM Suite, along with UCM and IPM?  As I said, I am creating a BPM app that needs to communicate with IPM to search for and update field data for documents stored in the UCM respository.

    Hi Preethi,
    I also have same kind of scenario. Were you able to refresh the workspace programatically?
    Thanks,
    Pradeep

  • How long until Oracle posts BPM Suite bundle definition and costs???

    Alright... how long do we have to wait until Oracle officially posts what is in the BPM Suite and updates the price list? The current web site contents certainly don't have the up to date BPM Suite product bundle correctly identified. The May price list still has the price over $115K which can't be right since I also need the SOA Suite. I have run into multiple Oracle sales reps who all gave me different answers. Anyone else care to know this information with some clarity and want to chime in asking Oracle to make it clear?

    Hi Kyle,
    I really understands your concern.With some limited feature with BPM composer it is best to start building BPM Process first from using Jdeveloper.
    They we can move to web form which will give an more insight into BPM.
    Please prepare to have some knowledge on ADF too. Its simple
    To start with i would suggest below link:
    http://blogs.the-hindu-matrimony.com/wordpress/oracle-fusion-middleware/oracle-soa-bpm-11g-blogs/oracle-soa-bpm-11g/bpm-…
    Check this for Composer web forms:
    https://java.net/downloads/oraclebpmsuite11g/Samples/bpm-WebForms-BasicTutorial/BPM%2011g%20Sample-Web%20Form%20Basic%20Tutorial.pdf
    http://www.lkakarla.com/2013/03/create-bpm-process-using-composer.html

  • Newsgroup reorganization + New AL BPM Suite Product Center on Dev2Dev

    Hi,
    As you've probably noticed, we've reorganized the BPM newsgroups a little - cutting down on the dozen or two that we had (aqualogic.business.service.*), leaving just five:
    aqualogic.bpm.general
    aqualogic.bpm.modeling (renamed old .project.development)
    aqualogic.bpm.runtime
    aqualogic.bpm.administration (renamed old .bpm.administration)
    aqualogic.bpm.development (renamed old .service.papi)
    We hope this makes it easier for everyone to monitor and contribute. At the same time, we've created a new AquaLogic BPM Suite Product Center on Dev2Dev:
    http://dev2dev.bea.com/albpm/
    Regards,
    Jon
    PS. Here's our intent for the newsgroups:
    * aqualogic.bpm.general
    - announcements, concepts, foundations
    * aqualogic.bpm.modeling
    - process modeling, simulation, importing models, modeling tips
    * aqualogic.bpm.runtime
    - performance, scalability, architecture, monitoring, J2EE
    * aqualogic.bpm.administration
    - installation, deployment, automation, configuration, directory[ALIP]
    * aqualogic.bpm.development
    - process management, version control, configuration

    some newsgroups were renamed, others were archived.
    the screenflows newsgroup (via NNTP) is not available anymore, you should refer to the new names if you want to access via NNTP.
    People reading via RSS should not change anything since the URLs are based on the internal id and not by name.
    MAriano Benitez
    AquaLogic BPM 5.7 SP1 is now available!

  • Developers Guide for Oracle BPM Suite....

    All,
    I was trying to find a developers guide for using Oracle BPM Suite (11g). I found the one in the following link, however this looks like a pretty detailed one...
    http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/toc.htm
    Can you someone help me find any other flavors of the developers guide? I am looking for the following...
    1. Methods of work - Best Practices for design and development of BPM process models.
    2. Naming Conventions for Process Modeling - Best Practices
    3. Coding standards for Process Modeling (J Developer)
    4. Guide with FAQ's for connecting / Publishing Process Models to the MDS Database.
    5. Deployment Standards - best practices....
    6. Infrastructure - Recommendations for Scale out deployment in Linux v/s Windows OS.
    Regards,
    Dinesh Reddy

    Hi,
    For BPM Studio Developer guide go for this http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15176/toc.htm
    For every thing related to FMW
    http://download.oracle.com/docs/cd/E17904_01/index.htm
    Thanks,
    Biltu

  • Extending Expense Management Example in BPM Suite

    Hi All,
    I am a newbie for BPM Suite. I went through the expense management example.. Next, I would like to extend the example and integrate it with external resources like database and http server (apache tomcat will do).
    For eg, Can I store the list of participants in the database and retrieve them when I launch my workspace.
    I read about BPM Process API (PAPI), PBL, Fuego but I am not able to relate these. Can anyone please explain me how are they used in integration with BPM Suite ??? Next, How is BPEL Manager Used with BPM Suite ???
    I tried searching internet for tutorials/articals but was not able to find anything relevant.
    Kindly help...
    Many Thanks,
    Sophie

    Here are the steps:
    1. create an external source for your DB: right-click on External Resources -> New External Resource -> Type: SQL Database -> enter all necessary information on your DB (page 145 Oracle BPM StudioGuide)
    2. create a module: right-click on Catalog -> New -> Module -> enter name (page 167 Oracle BPM StudioGuide)
    3. catalog the external resource: right-click on the newly created Module -> Catalog Component -> SQL -> choose your ex. res.
    4. create a BPMObject according to your data structure you want to store.
    5. create a presentation based on this BPMObject
    6. use a BPM Object Interactive Call in your screenflow to display the form (presentation).
    7. implement an automatic activity (impl. type: method) and enter this SQL statement into the method (var1SF id my instance variable in the screenflow):
    INSERT INTO buch (id, titel, author, preis)
    VALUES (var1SF.id, var1SF.titel, var1SF.author, var1SF.preis)
    Have also a look at the thread:
    h4. BPM and database interaction
    and consider Dan Atwood's answer (i couldn't implement it yet...) on reading data from the DB

  • Oracle BPM Suite 11.1.1.4 (Patchset 3) is available

    Oracle BPM Suite 11.1.1.4 (Patchset 3) is available at - http://www.oracle.com/technetwork/middleware/bpm/downloads/downloads-097443.html
    It requires WLS 10.3.4 - http://www.oracle.com/technetwork/middleware/downloads/index.html
    Dan
    Edited by: Daniel Atwood on Jan 21, 2011 6:46 AM

    Thank you Dan!
    I have a question. I have been trying to download the generic installers (since I want to install on a 64 bit Linux). The thing is I cannot find the RCU generic (there is one for Win and another one for Linux). Any idea where can this be downloaded?
    On a different topic, here I am sharing the BPM 11.1.1.4 Installer guide that has been released recently:
    http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.pdf
    That link is available from this page (just in case they change it):
    http://www.oracle.com/technetwork/middleware/soasuite/overview/index.html
    Regards,
    Gus

Maybe you are looking for