Correlation of reservation with Planned order in APO.

Hi,
In R/3 in COGI we see reservations. my issue is I want to know for which planned orders in APO these reservations are.
In the product view in APO we can see some reservations (PRDRES(W) - correct me if I am wrong). How to correlate these reservations with planned orders. I am looking in PP/DS module of APO.
Thanks a lot in advance,
Prabhat

Hi Prashant,
                  You are correct and if product is showing the reservation then it is mean for all order in product view.
You can check the Production Planning Table inside PPDS for wider view of reservation and orders.
/n/sapapo/ppt1
Check the SAP Note: SAP note 439596
SAP Link is also useful:
http://help.sap.com/saphelp_scm50/helpdata/en/64/dca63be2bc331be10000000a114084/content.htm
http://help.sap.com/saphelp_scm50/helpdata/en/c1/147a375f0dbc7fe10000009b38f8cf/frameset.htm
Let me know if it is sufficient.
Regards,
Vishal

Similar Messages

  • Reservation of Planned Order

    Hi,
    In R/3 in COGI we see reservations. my issue is I want to know for which planned orders in APO these reservations are.
    In the product view in APO we can see some reservations. How to relate with planned orders. I am looking in PP/DS module of APO.
    Thanks,
    Prabhat

    Hi Gaurav,
    Thanks for your reply but sorry to say that I couldn't understand the matter.
    I saw in the product view but how to corrrelate the reservation with particular planned order.
    I am not seeing any column for orders in the "Context"
    Please let me know what I am missing ?
    Regards,
    Prabhat Sahay
    Edited by: Prabhat Sahay on Jan 28, 2011 7:24 AM

  • Read the characteristics of a planned order in APO

    how can we read the characteristics of a planned order in APO.What Function Module can be used for this?
    how can we manually schedule the order activities based on the characteristics. Can we use the function module 
    /SAPAPO/OM_ACT_SCHEDULE by copying and making some changes in it for this purpose?

    Hi,
    if there are any orders in your system with characteristics (in planning version 000) then this report will find them:
    report  get_char.
    data:
       ls_genp     type /sapapo/om_gen_params,
       lt_orderid  type /sapapo/om_orderid_tab,
       lt_char     type /sapapo/om_charact_val_tab.
    ls_genp-simversion = '000'.
    call function '/SAPAPO/OM_ORDER_GET_ALL'
      exporting
        is_gen_params = ls_genp
        iv_simsession = ''
      importing
        et_orders     = lt_orderid.
    call function '/SAPAPO/OM_ORDER_GET_DATA'
      exporting
        is_gen_params       = ls_genp
        iv_simsession       = ''
        it_order            = lt_orderid
      importing
        et_charact_val_acts = lt_char.
    Best regards
    Thomas

  • Creation of Reservation for planned order

    Hi Team,
    Is it possible to create reservation for planned orders after MRP run?
    My opinion was the reservation can only be created with reference to production order after MRP. The reservation can not be created with reference to planne dorders after MRP run because planned orders are intermident document which will not exist in the system always. The planned order details will not be available in the system once it get converted into production order.
    How the reservation will be processed which was created with reference to planned order after converting the planned order to production order?
    Kindly need ur guidance.
    Thanks
    psk

    Dear PSK,
    In a typical discrete manufacturing setup production orders are the promised receipt for which reservations gets generated as
    soon a production order is created.But only if the order is released goods movements can be posted against the reservation
    details through MIGO/MB1A for 261 movement.
    It's not required to create any reservation at the planned order level or which may not help you in any means to your business.
    But however in a REM scenario MF60 is used to create stock transfer reservations for 311 movement where planned orders
    are used for production backflush.To explain in detail even without any planned orders you can do a stock transfer reservation
    for a production quantity.
    Check and revert back.
    Regards
    Mangalraj.S

  • Reservation against planned order

    Hi...
    I have one issue with reservation against planned order.
    We have REM & after MRP run generates planned order with order type PE.When i check planned order in table PLAF.
    I found reservation no. & same has been passed to RESB , I got the reservation details but it is not allowed for goods movement XWAOK field in RESB. So no question of goods movement through MB1B with movement type 311.
    My question is that is there any customization related to above scenario so that reservation is allowed for goods movement?
    Regards
    Tushar

    Dear ,
    In REM , you will recieve reservation against planned order .But GI always happens during GR or after GR along with back flashing .I do not think so you can issue material against reservation as like normal PP Order reseravation  in the production order .
    1.Goto -SPRO->production-> Rep Manufacturing->Define Rem MAnufaturing profile(OSP2) --->Control data, in the Control data 1 tab select the "GI back flush at GR posting".
    2.Check in  the REM profile assigned in MRP view of material Master (MM03)
    Based on this above set up , you can make Goods Issue for Planned order in REM .If you deselect that option execute material staging transaction code is MF60 and then go for REM backflush. In materil staging the components issue is carried out for the planned order.After that you can execute the REM backflush in MFBF
    In rem scenarion components placed on the production lines anonomously (without ref to planned order)...you cannot issue materials like in production orders scenario. if you want to have track on the good issues before the GR then use the pull list concept...there will be no movement type but you will have track on quantities issued to header parts/production lines not to planned orders.
    Hope this clarifies your doubt .
    Regards
    JH

  • How do I maintain storage location for Planned Orders in APO

    Dear all,
    Can you help us in maintaining storage location for planned orders in APO. The storage location from material master need to be updated in product master of APO and the same shall be automatically picked from product master during Supply Network Planning run.
    Material master CIF is live.
    We have got the following content error in CIF consistency check. How ever this is nt goging to harm any thing, but we would like to maintain in both R/3 and APO.
    Error:
    Plant and storage location in SAP APO: 2004
    Plant and storage location in SAP R/3: 2004 FGPA
    Thanks in advance
    Ram Mohan Rao Kolanupaka

    Instead of maintaining additional master data, i would rather use CCR user exits to switch off comparison of planned order at storage location level if the APO storage location is blank. This way you would not have to make changes to PPMs everytime a new scale out of the solution happens.
    In SE18 check the user exit /SAPAPO/CIF_DELTA3 (interface RELEVANT_FOR_COMPARE_ORDHEAD)
    If it is not possible to switch off this comparison then I guess changing master data is the next step. Do explore with a developer though about the first option.

  • Unable to see planned order in APO

    Dear Experts,
    I'm creating a Project manufacturing order in ERP. After that I do MRP run in SCM7.0. When I check in Product View (transaction /SAPAPO/RRP3), I do not see any planned order, though I can see orders in ERP (Tcode-md04).
    I guess transfer of network to APO is not happening.
    Same problem arises when I schedule a dummy project in ERP and after I do MRP run in SCM7.0, I do not see any planned order in planning board.
    The MRP run in SCM7.0 shows no error and no warnings and everything appear in green.
    I was able to see planned orders in APO before there was system upgrade from SCM 4.2 to SCM 7.0.
    Please provide some clue to solve this problem.
    Regards,
    Jyoti

    Hi Jyoti,
    There will be an "Iterate" button on the left hand corner in the result display of CCR.  Please click on this button so that these errors will get iterated and goes to the respective distinations.  After this, you go to smq1 and smq2 trasnaction codes of R/3 and clear all the queues.  Similarly you clear the queues in smq1 and smq2 transaction codes of APO.  Afterwards, check whether you are able to see the planned order.
    Please confirm
    Regards
    R. Senthil mareeswaran.

  • How could I re-explode planned order in APO?

    Please adivse me how could I re-explode planned order in APO?

    Hi,
    Go to the planned order in the change mode, again adopt the source of supply and save.
    or you can use the PPDS heuristics "SAP_PP_021" New explosion to explode the orders.
    Thanks,
    nandha

  • Deletion of Planned Order in APO PP/DS

    Hi All,
    I have a question on PP/DS ( IS-Auto ). Suppose if we are deleting the planned orders in APO so what will happen to the concerned PDS. I want to preserve the PDS so that we can use them later.
    If we delete the Planned Orders then will the PDS be also deleted ?
    Thanks,
    Prabhat

    Prabhat,
    Think of a PDS the same way you would think of a Production Version in ECC.  It is master data, and one or more of these can be assigned to a Material/Plant combination.
    http://help.sap.com/saphelp_scm70/helpdata/EN/4d/01be3d1abbe913e10000000a114084/frameset.htm
    A Planned order is Transactional data.  Creating/changing/deleting a Planned order has no impact on PDS Master data.  During the creation of a planned order, the system reads the PDS info, and copies selected bits of this master data into the Planned order.  At this point, then, certain parts of the planned order data can be changed.  Such changes generally do not affect the underlying master data.
    http://help.sap.com/saphelp_scm70/helpdata/EN/49/d565caf54535f5e10000000a42189c/frameset.htm
    Best Regards,
    DB49

  • Multi - item planned order in APO

    Hi
    In the MES multiple knife positions are possible in a single pattern. How to create a multi item planned order in APO based on the knife positions in the pattern? When the conversion indicator is set in APO the planend order need to be converted in to multi item production order in R/3. Please help how to configure the same in APO.
    Thanks in advance.
    Regards
    Dhaiva

    Hi,
    Are you using this for trim interface ?
    If yes, you need to use Template PDS/ppm for the same.
    For more info, you can have a look at SAP note 919080.
    Let me know if this info helps
    cheers
    Ram

  • How to delete Planned Order in APO

    Hi,
    How can I delete planned orders in APO? I already tried //RLCDELETE but it says "Order not in live cash" but I can see the order in //RRP3.
    Let me know if you know another TCODE for this.
    Thanks
    David

    Hello David -
    Please use /SAPAPO/DELETE_PP_ORDER to delete planned orders.
    thanks
    Varun

  • Error while creating manual planned order in apo

    Dear expert
    While I am creating manual planned order i am getting error as message /sapapo/rrp251
    Every thing is correct BOM and PV's no error after consistency check and it getting succesfully transffered to APO and it is also visible in APO
    But while creating manual planned orders planned order are not getting generated  I am using BLock planning with PPDS
    Please help How to resolve it
    Regards
    Virender

    Hi
    The error message /SAPAPO/RRP251 - Error occurred while creating order means While creating an order, the system encountered problems, such as, for example, no available components or components that are available late, orders that could not be scheduled, and so on.
    I think system attempted to solve the availability problems by using alternative procurement options. This was not successful. The order could not be created. Check the exceptional situations in the planning protocol, under Goto -> Planning log, and deal with the causes of the exceptional situations if this is possible or necessary.
    Thanks
    Amol

  • How to find out manual deletion of planned orders in APO.

    Planned orders are created on multiple bom levels when we call CTP from GATP for sales orders. For particular sales order there is no planned ordere at lower level. Dependent requirement is there which is uncovered.
    I want to find  somebody has deleted this planned order manually in apo. How to find out the same?
    Regards,
    Santosh

    Hi Santosh,
    If you suspect that the planned order was created but later on deleted manually, there is a cross check you can do to determine that.
    In case of MATP, System uses the higher level Planned Order number to create the Dependent Demand at the lower level and only when this dependent demand is covered by a planned order it assigns the corresponding planned order number to it. So if you see the dependent demand number with same  number as the higher level planned order for which it was created, you can be sure that a planned order was not created to cover the dependent demand that you see uncovered.
    If the dependant demand number is not same as the planned order at higher level, then the planned order to cover the dependent demand was deleted.
    I guess CTP also works the same way. If you're unsure about this, test it out.
    Hope it helps.
    Regards,
    Mohan

  • Changing & deleting the SNP PDS planned order in APO using BAPI

    Hi,
    There is a requirement to consolidate the SNP PDS planned order created from CTM in APO. This is to change one of the SNP PDS planned order by adding the quantities of the other planned order , which is to make it into one & delete the other SNP PDS planned order. Can this be done progrmatically using BAPI?. As we know this cant be changed in RRP3 as the SNP-PDS are uneditable.Please help me on this one. As I need the solution to this ASAP.
    Is there any BAPI/FM using which SNP PDS planned order can be changed? What is the BAPI for PPDS planned order creation / change?
    With thanks & regards,
    Naveen
    Message was edited by: Naveen Srinivasa

    Hi Mariano,
    I have gone through the description of the FM it says:
    This function module is complex and is subject to several technical restrictions. For this reason, you should not use ORDER_CHANGE for extended periods of time.
    The recommended alternatives are:
    OM_ORDER_CREATE
    for creating orders
    OM_ORDER_DELETE
    for deleting orders
    OM_ORDER_MODIFY
    for changing existing order components
    Have you used these FM any time?.Kindly share more details in case is you have used them.
    with thanks & regards,
    Naveen

  • Modifying Sales order in ECC does not modify the planned order in APO?

    Hello,
    I have the next situation, a MTO scenario, LPP material,:
    - users create a sales order, quantity 2000M, 2 individual lenghts by 1000M. In automatically, being a MTO scenario, APO generates a planned order to fulfill the requirement with 2000 M qty, individual lenght 1000.
    - users modify the sales order, the quantity 2000 M remains, but will change it in 1 individual lenght by 2000M. APO cancels the precendently created planned order and generates another one, with individual lenght 2000.This is OK.
    -users modify the sales order, the quantity remains 2000 M, but again 2 individual lenghts by 1000 M. In this case, the planned order is not cancelled, as expected, but remains with individual lenght 2000, which is not ok.
    Any idea how to fix this?
    Regards,
    Alex

    Hello again,
    while creating/changing sales order in crm,
    the user exit mv45 is called in R3.
    Problem solved.
    Thanks
    Gerd

Maybe you are looking for