CorrelationId in receiver JMS adapter.

hi to all,
i need to send the correltionId in the message header of a receiver jms adapter.
which parameter i need to specify?
i've cheked the flag "set the additional JMS parameters...." as the documentation says: DCJMSCorreleationID with value 0001.
but nothing change in the message header.
thanks in advance
Claudio.

<i>here is a new parameter in JMS adapter now. There is an option of saving the JMS correlation ID of the request in the receiver JMS adapter. In the sender adapter, one can then set the XI conversation ID to the saved JMS correlation ID of the request. This makes the additional parameters that were required in previous Support Packages obsolete. However, the configuration settings that were made prior to SP7 are still valid.</i>
From
/people/kan.th/blog/2007/02/05/exploring-jms-and-sap-xi-jms-adaper
Also this would b helpful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8060448a-e56e-2910-f588-9af459e7ce21
<i>[Reward if helpful]</i>
Regards,
Prateek

Similar Messages

Regarding Module Configuration of Receiver JMS Adapter

Hi,
Now i am working on IDoc to JMS interface, I am facing complexity in creating the structure in Module tab of Receiver JMS Adapter. Because the target system is expecting fixed length file so i should use the Local EJBs available in Module tab of Receiver JMS adapter and i need to pass the fieldFixedLegth parameters for all the nodes coming from DELVRY01 Idoc. I think creating structure for all the nodes in receiver jms adapter is so complex, If you are having any other alternatives, please share with me.
The below is the IDoc xml which is coming from source side.
<?xml version="1.0" encoding="UTF-8" ?>
<DELVRY01>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>100</MANDT>
<DOCNUM>000000000999999</DOCNUM>
<DOCREL>1145</DOCREL>
<STATUS>1</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>DELVRY01</IDOCTYP>
<MESTYP>abcde</MESTYP>
<SNDPOR>efghi</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>LMNOP100</SNDPRN>
<RCVPOR>A000000023</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPRN>TB</RCVPRN>
<CREDAT>20056556</CREDAT>
<CRETIM>183734</CRETIM>
<SERIAL>12345678</SERIAL>
</EDI_DC40>
<E1EDL20 SEGMENT="1">
<VBELN>006456451</VBELN>
<VSTEL>4656</VSTEL>
<VKORG>1665</VKORG>
<ABLAD>ABCDEDFJSDFDF</ABLAD>
<ROUTE>DFSDF</ROUTE>
<VSBED>08</VSBED>
<BTGEW>3.000</BTGEW>
<NTGEW>333.000</NTGEW>
<GEWEI>NNN</GEWEI>
<VOLUM>450.190</VOLUM>
<VOLEH>DMBG55TERTQ</VOLEH>
<ANZPK>00000</ANZPK>
<XABLN>0001995346331</XABLN>
<LIFEX>N</LIFEX>
<E1EDL22 SEGMENT="1">
<VSTEL_BEZ>ABCDEFGHIIJFLD</VSTEL_BEZ>
<VKORG_BEZ>SDFKJSDFSDF</VKORG_BEZ>
<ROUTE_BEZ>FSDNFKSDJFKJASDKFJSDJFL</ROUTE_BEZ>
<VSBED_BEZ>FNSDKFSD,F,MSDF,</VSBED_BEZ>
</E1EDL22>
<E1EDL21 SEGMENT="1">
<KDGRP>10545</KDGRP>
<BEROT>teGHGHst FGHHFGHXI </BEROT>
<TRAGR>0001</TRAGR>
<E1EDL23 SEGMENT="1">
<LFART_BEZ>Outbound delivery</LFART_BEZ>
<KDGRP_BEZ>LPHG Wholesale</KDGRP_BEZ>
<TRAGR_BEZ>On HHFH</TRAGR_BEZ>
</E1EDL23>
</E1EDL21>
<E1EDL18 SEGMENT="1">
<QUALF>ORI</QUALF>
</E1EDL18>
<E1ADRM1 SEGMENT="1">
<PARTNER_Q>AG</PARTNER_Q>
<PARTNER_ID>00000GHF12889</PARTNER_ID>
<LANGUAGE>EN</LANGUAGE>
<FORMOFADDR>Makro SA</FORMOFADDR>
<TELEPHONE1>041 3600TERTE605-C...</TELEPHONE1>
<TELEFAX>041 36006TRT47</TELEFAX>
<COUNTRY1>ZHFGHA</COUNTRY1>
<REGION>EHGHC</REGION>
<E1ADRE1 SEGMENT="1">
<EXTEND_Q>100</EXTEND_Q>
<EXTEND_D>6HG15FGHFG05006416</EXTEND_D>
</E1ADRE1>
</E1ADRM1>
<E1ADRM1 SEGMENT="1">
<PARTNER_Q>WE</PARTNER_Q>
<PARTNER_ID>00000178E87T</PARTNER_ID>
<LANGUAGE>EN</LANGUAGE>
<FORMOFADDR>Makro SA</FORMOFADDR>
<NAME1>Makro Port Elizabeth Br 14</NAME1>
<NAME3>t/a Makro SA</NAME3>
<STREET1>CDFJSDLFJLS d</STREET1>
<COUNTRY1>ZFSDFA</COUNTRY1>
<REGION>EFSDFC</REGION>
<E1ADRE1 SEGMENT="1">
<EXTEND_Q>100</EXTEND_Q>
<EXTEND_D>6001534453505006416</EXTEND_D>
</E1ADRE1>
</E1ADRM1>
<E1ADRM1 SEGMENT="1">
<PARTNER_Q>54OSP</PARTNER_Q>
<PARTNER_ID>404534501</PARTNER_ID>
<LANGUAGE>EN</LANGUAGE>
<COUNTRY1>Z5454A</COUNTRY1>
</E1ADRM1>
<E1ADRM1 SEGMENT="1">
<PARTNER_Q>OSO</PARTNER_Q>
<PARTNER_ID>1054400</PARTNER_ID>
<COUNTRY1>Z5453A</COUNTRY1>
</E1ADRM1>
<E1EDT13 SEGMENT="1">
<QUALF>006</QUALF>
<NTANF>2005455470706</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>2005453470706</NTEND>
<NTENZ>00053454000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00005340000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
<E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20070706</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>200705345706</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000053455400</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
<E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20070706</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20070706</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
<E1EDT13 SEGMENT="1">
<QUALF>007</QUALF>
<NTANF>20070709</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20070709</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
<E1EDT13 SEGMENT="1">
<QUALF>010</QUALF>
<NTANF>20070705</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20705</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
<E1EDL28 SEGMENT="1">
<ROUTE>ED545S1</ROUTE>
<DISTZ>0.000</DISTZ>
<E1EDL29 SEGMENT="1">
<ROUTE_BEZ>FKLSDJFLSJDFJSDFJLSDJFLKSD</ROUTE_BEZ>
</E1EDL29>
</E1EDL28>
<E1EDL24 SEGMENT="1">
<POSNR>000010</POSNR>
<MATNR>000000000000</MATNR>
<MATWA>000000000</MATWA>
<ARKTX>OmFDFS 2kg.</ARKTX>
<MATKL>FSD5345FSDFLAUND</MATKL>
<WERKS>10FDF40</WERKS>
<LGORT>01</LGORT>
<LFIMG>10545.000</LFIMG>
<VRKME>C54T</VRKME>
<LGMNG>10553545.000</LGMNG>
<MEINS>CT534555345545345</MEINS>
<NTGEW>1653454.000</NTGEW>
<BRGEW>181.000</BRGEW>
<GEWEI>KGM</GEWEI>
<VOLUM>450.190</VOLUM>
<VOLEH>DMQ</VOLEH>
<LADGR>0534543002</LADGR>
<TRAGR>0001</TRAGR>
<VKBUR>UF53401</VKBUR>
<VKGRP>160</VKGRP>
<VTWEG>00</VTWEG>
<SPART>00</SPART>
<GRKOR>000</GRKOR>
<EAN11>16001085031034</EAN11>
<POSEX>000000</POSEX>
<E1EDL25 SEGMENT="1">
<LGORT_BEZ>Main s53453453454tore</LGORT_BEZ>
<LADGR_BEZ>Forklift</LADGR_BEZ>
<TRAGR_BEZ>On pallets</TRAGR_BEZ>
<VKBUR_BEZ>Gener534534al Trade</VKBUR_BEZ>
<VKGRP_BEZ>RSM E534 Cape</VKGRP_BEZ>
<VTWEG_BEZ>FKLSDFKLS</VTWEG_BEZ>
<SPART_BEZ>FSDFSDFJoducts</SPART_BEZ>
</E1EDL25>
<E1EDL26 SEGMENT="1">
<PSTYV>TAN</PSTYV>
<MATKL>FGUND</MATKL>
<PRODH>0125VH</PRODH>
<UMVKZ>1</UMVKZ>
<UMVKN>1</UMVKN>
<KZTLF>B</KZTLF>
<UEBTO>0.0</UEBTO>
<UNTTO>0.0</UNTTO>
<KVGR1>Z4FDFSDFSD</KVGR1>
<KVGR2>TPS</KVGR2>
<E1EDL27 SEGMENT="1">
<PSTYV_BEZ>Standard Item</PSTYV_BEZ>
<PRODH_BEZ>OmoFFD Regular 8X2kg.</PRODH_BEZ>
<WERKS_BEZ>ConFSDFgella DC</WERKS_BEZ>
<KVGR1_BEZ>PE Cust Del</KVGR1_BEZ>
<KVGR2_BEZ>rd party sales</KVGR2_BEZ>
</E1EDL27>
</E1EDL26>
<E1EDL43 SEGMENT="1">
<QUALF>C</QUALF>
<BELNR>FDF</BELNR>
<POSNR>000010</POSNR>
<DATUM>FFSDF</DATUM>
</E1EDL43>
<E1EDL41 SEGMENT="1">
<QUALI>54</QUALI>
<BSTNR>test I Link</BSTNR>
<BSTDT>00000000</BSTDT>
<POSEX>000010</POSEX>
</E1EDL41>
</E1EDL24>
</E1EDL20>
</IDOC>
</DELVRY01>

duplicate blog

Sender/receiver JMS Adapter XML Format

What is the XML format do we need to pass to Sender/receiver JMS adapter to get it processed. Do we have any specific format like JDBC adapter.
Thanks,
Sam

Hi,
1) The JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK
2) Before to use the JMS adapter we must first install the relevant JMS driver.
The required Java libraries are product-specific The provider setting specifications are the same for the receiver and sender adapter
3)We need to configure the JMS adapter in the configuration part of the Integration Builder/PCK
4) The Sender JMS adapter is configured to send JMS messages to the Integration Engine or the PCK.
5)The Receiver JMS adapter is configured to be able to convert XI messages from the Integration Server or the PCK into JMS messages
Please go through this link
1)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
2)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm - Configuring the Sender JMS Adapter
3)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
Configuring the Receiver JMS Adapter
4)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
JMS-Provider-Specific Settings
5)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
JMS Adapter Modules
6)http://help.sap.com/saphelp_nw04/helpdata/en/45/20d1dec20a0732e10000000a155369/frameset.htm -
Async/Sync and Sync/Async Bridge in the JMS Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
Thanks,
Soumya.

Receiver JMS Adapter Content Conversion issue

Scenario :
R/3 -->XI -->MQ(XML2Plain)
Hi
We are using Receiver JMS Adapter to send the Message from XI to MQ.
The XML has to be converted to plain file. And Content conversion is
being done.
With the new development, the message type defined consist of 8 fields
with fixed length. The XML message goes successfully from XI to MQ
without any content conversion. But once simple content conversion is
being done for Receiver JMS adapter, even though the message is
received but its empty (without any data records). The adapter
monitoring everything seems fine and it gives the status that message
converted to binary and the message is delivered to MQ. Though on
checking the messages there is no data records.
Below is my content conversion configuration done in Module tab. Kindly
revert back what can be the problem as have done exactly the same way
as described in Content Conversion How to Guide for receiver JMS.
localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean XML2Plain
localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
localejbs/SAP XI JMS Adapter/SendBinarytoXIJMSService Local Enterprise Bean exit
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain TransformContentType text/plain;charset=utf-8
XML2Plain xml.addHeaderLine 0
XML2Plain xml.addHeaderLine SimpleXML2Plain
XML2Plain xml.fieldFixedLengths 8,10,10,20,40,40,8,8
XML2Plain xml.fixedLengthTooShortHandling Cut
regards.
santosh.

Hi,
check localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
this is not CallJMSService.
And also check the receiver Structure, if it is falt structure its ok, else
see the below link if it has the complex structure , how to handle..
See the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla..

Module in Receiver JMS Adapter

I am using the following Modules in one of receiver JMS adapter. What is the function of each Bean that we are using here ??
Any links in this regard is appreciated
1-AF_Modules/RequestOnewayBean-Local Enterprise Bean-0
2-SAP XI JMS Adapter/ConvertMessageToBinary-Local Enterprise Bean-convert_XI2Bin
3-SAP XI JMS Adapter/SendBinarytoXIJMSService-Local Enterprise Bean-exit
4-AF_Modules/WaitResponseBean-Local Enterprise Bean-1
thanks
kumar

Hi,
The JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK.
This link will help you...
JMS adapter
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5393. [original link is broken] [original link is broken] [original link is broken]
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
ref this weblog by william Li
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
syn-asyn bridge( with out bpm)
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
similary asyn-syn bridge
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
also refer
http://help.sap.com/saphelp_nw04/helpdata/en/45/20d1dec20a0732e10000000a155369/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20the%20content%20conversion%20module%20with%20the%20xi%203%20j2ee%20jms%20adapter
/thread/217893 [original link is broken]
JMS adapter -Message format pre-requisites
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure

File to JMS Scenario - Error is Receiver JMS Adapter

Hi,
I am working on File to JMS scenario. I have deployed all required jars for MQ 6.0.2 in SDM. Create all MQ related objects. I am getting following error for Receiver JMS adapter in CC Monitoring.
Please let me know if I have missed anything. Is there anything to do in Visiual Administrator->JMS Provider or JMS Connector for these kind of Scenarios?
Thanks in Advance...
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2009
MQJE016: MQ queue manager closed channel immediately during connect
Closure reason = 2009
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Hi,
I have made my Qmanager as default Qmgr. Now the error is :- Socket connection attempt refused
Recv JMS Communication Channel Error:-
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2059
MQJE011: Socket connection attempt refused
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Error with the Receiver JMS Adapter (Connection On-Demand feature)

Hi,
In high volume we are experiencing errors with the Receiver JMS Adapter and the connection On-demand feature:
Adapter Framework caught exception: while trying to invoke the method com.sap.aii.adapter.jms.api.connector.DisconnectorListener.notifyEvent(java.lang.String) of an object loaded from local variable 'listener'
Delivering the message to the application using connection JMS_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: while trying to invoke the method com.sap.aii.adapter.jms.api.connector.DisconnectorListener.notifyEvent(java.lang.String) of an object loaded from local variable 'listener'.
The message status was set to WAIT.
Looks like the message is successfuly reprocess after the wait period but the ALEAUD/Akcnowledgment are not successful in the sender ECC system. (SAP -> PI - > JMS)
Any idea?
PI 7.1 EHP1
Thanks,
Martin
/people/sunil.ojha5/blog/2010/08/31/review-of-sap-pi-jms-adapter-on-demand-connection-feature
Edited by: Martin Lavoie Rousseau on Jun 3, 2011 3:21 PM

Please ensure to have specified an User and password to connect to JMS server (don't leave the fields empty).

EDI Idoc -- Receiver JMS Adapter.

Hi,
I'm facing this issue from few days.
Sender is EDI Idoc and contains header and Footer.
This is placed in the application server of SAP system.
From there xi picks the EDI Idoc and sends to JMS server.
Facing problem on the receiver JMS Adapter.
Find the error message.
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No transition found from state: ERROR, on event: process_commence for DFA: CC_JMS_RCV_DEVWR0000000:165b1638fd823a8f822f0db8a9b1d488"
I have provoded the "dict" and "doc" value also.
Pls suggest.
Thanks in advance,
Jeevan.

Hi Guys,
There could be some problem while deploying the libraries. Check out the thread No transition found from state: STARTING
Thanks,
PP

Receiver JMS adapter content conversion

Hi All,
Can anyone provide me guidelines on how to do content conversion for the receiver JMS adapter??
Thx
Navin

Hi,
Based on your structure , you need to configure the JMS CC parameters.
see the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
regards
Chilla

Converting QoS from EO to EOIO in Receiver JMS Adapter

Hello All -
We are currently working with SAP XI 3.0 SP12. Our scenario is something like this:
IDoc -> XI (BPM) -> JMS Adapter
The BPM splits up the incoming IDoc into multiple JMS messages.
The problem is that when the BPM sends the message to the JMS adapter the QoS changes from EOIO to EO. This essentially means that when the messages are written to the JMS Queues, there is no gurantee that they would be written in exactly the same order in which they are produced.
The requirement is to write the messages in exactly the same order in the target queues.
One solution is to capture the transport level acknoledgements and then send the next message from the BPM only on the receipt of the acknoledgement which takes a lot of time.
Is there any other mechanism to ensure the messages going out in an EOIO fashion.
Ashish

Its like this , i ve file -> bpm -> idoc scenario. 've configured EOIO as the QOS for both adapters. file adapter is configured to pick up a pattern , say *.abc.
The picking option is "By Date". Say there are 5 files in the directory before a particular polling interval which has about 5 sec time delay b/w them in their timestamp.
Now the file adpater picks the files in order , delivers it to ccBPM, i can see 5 diff ccBPM instances(diff workitem IDs).
Say, the third file has less data , the transformation happens faster in the 3rd ccBPM instance and so it delivers it to the idoc adapter vefore the 1st or 2nd one completes. So my order is lost.
Now , i tried setting "transport ack" in send step , but didnt help.Is there any other specific setting to be done ?
Thanks
Saravana

How to send alert when receiver JMS adapter fails? Please help!

Hi experts,
   I have the following Asynchronous scenario:
   SAP R/3 -
>IDOC----->XI>JMS--->BizTalk.
   I am sending IDOC from a given SAP R/3 system to XI. XI then sends the same to BizTalk via JMS adapter. In SXMB_MONI the message is successfully processed as it shows checked flag. But if I see the JMS communication channel status in runtime workbench then there it shows error saying JMS queue user id or password not found.
How to send this JMS adapter error as alert?
I also tried configuring alert rule in runtime workbench but still it does not trigger any error.
I have also verified the alert category and everything is fine with that.
What could be the problem? How can I send an alert when an Async adapter fails?
Thanks & Regards,
Gopal

Hi! GOPAL,
Once make sure whther all the below mentioned steps are configured correctly or not ok
1: First make sure whether you are working on SAP XI or PI 7.1
           a) If XI you need to create Alerts (ALert Category) in CCMS ABAP stack in the
                    Tcode. ALRTCATDEF
           b) Open the alert category/classification definition environment (transaction ALRTCATDEF).
     ensure you are in change mode.
           c) In the group box with the alert classifications, right-click All classifications to open the
                context menu, and choose Create.
           d) Under Classification, enter a name for the classification.
           e) Under Description, enter a description of the classification.
           f) Save your entries.
           g) Then go to RWB-->Go to ALERT Configuation and ADD the RULES to your alert category gor
     which created there in the abap stack.
Note Suppose if you want those ALERTS to come to your MAIL then again go to ABAP STACK and go to Tcode. ALRTCATDEF and select your alert category press FIxed Recepients and there give your SAP XI ID's then u can see those alerts in RWB-->ALERT INBOX
Suppoe if you want those to mail then ask the basis team to link your company mail or personal mail ID to your SAP ID.
2. Supppose if you are working on PI 7.1 Server.
     Only difference is creating Alert Category...Here you can create your ALERT Classification I mean
     alert caltegory in the ESR (Enterprise Service Repository )
     Software Component >S CVersion>NameSpace-->Alert Category.
     You can configure how u configure there in abap stack such as long and short text every thing
      except Fixed Receipients you need to give that recepients there only in ABAP STACK.
      what ever ALERT CATEGORY you are creating will reflect there in the ABAP STACK
     even you can Use these alerts Category in BPM --> CONTROL STEP -->Configure here in this step
You can also reach alerts like this.
NOTE Most Important point is You can also view your mails or Alerts in the T Code:: SOST.
Regards:
Amar Srinivas ELi

Receiver JMS adapter issue in PI 7.1

Hi All,
We are using JMS receiver adapter for one of our scenarios. I'm facing different type of issue in production system
Issues:
If the channel is functioning the messages are successfully delivering to end system. If there are NO messages for long time the channel is not sending any message to end system and messages are getting failed in PI.
If i STOP and START the channel after few minutes channel able to deliver the messages.
I'm not not able to figure out where the issue is causing.
Please assist me to get ride of this issue.
Thanks in advance
- VR

Hello Rajesh and all,
Below is the error message i'm receiving. This issue is happens when there is no message flow for few hours and when a new message comes adapter channel in RWB through below error message.
Please assist with inputs
Message processing failed. Cause:com.sap.engine.interfaces.messaging.api.exception.MessagingException:Connector for ConnectionProfile of Channel:IN_JMS_xxxx
node:xxxx havingobject id:xxxxxxx encountered error:MQJMSxxx:an internal error has occured. Please contact your system administrator. Detail: com.ibm.mqservices.MQInternalException:MQJE001:
An MQException occurred:Completion Code 2,Reason 2195 MQJE046:Unsupported codeset:0 in sending to destination queue:///xxxxxx.QUEUE?targetClient=1, the message message:JMS Message class:jms_txt JMSType: null
JMSDeliveryMode:2 JMSExpiration:0 JMSPriority: 4 JMSMessageID: null JMSTimestamp: 0

Error in Receiver JMS Adapter

Hi,
We are having a problem in production, there is an interface which runs ok most of the time but sometimes it's throwing exception
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Unable to write new JMS message body for message: 4b4abe9e-24ff-007d-e100-80000a02210b: ConnectorException: Connector for ConnectionProfile of channel: Srv_WMS_VIC_JMSReceiveron node: 6532450 having object id: 966e2f3c527c359fbe4e1a1f902bf7d0 was unable to create a new javax.jms.TextMessage message: java.lang.NullPointerException
Then alert raises and someone has to manually stop and start the channel and resend the message in error.
This has been really annoying the support people and getting serious impact on business.
Does anyone has an idea why it is happening and what can be the resolution for the same.
Regards
Ria

Ria,
Is the exception throws after the restart of the Queue/ Receiver Server ?
Check - Note 856346
Cheers
Agasthuri

Receiver JMS Adapter Communication channel Error

Hi Experts,
The Error is given below
Cannot connect because class 'com.ibm.mq.jms.MQQueueConnectionFactory' is missing: ensure that JMS Provider library 'aii_af_jmsproviderlib.sda' contains all required resources.
when i searched SDN , i found the MQ JMS Library need to deployed in XI/PI . For clarification check SAP NOTE 1138877 is given .
What should I do ?
pls advice
Regards,
Jude

Hello Experts,
I am encountering the same error that you faced. I am using PI 7.0 and MQ adapter 6.0. I would like to know where to get the following jar files:
CL3Export.jar
CL3Nonexport.jar
com.ibm.mq.jar
com.ibm.mqjms.jar
connector.jar
dhbcore.jar
rmm.jar
I know that I am supposed to add the above files to aii_af_jmsproviderlib.sda on the PI server. As I not a basis person, it'll be great if you could direct me to some detailed instructions. I am trying to follow SAPNote: 747601.
Please correct me if I am wrong.
Thanks,
Bhanu.

Receiver JMS adapter

Hi All,
We have to send the JMS messages to external server.External server using weblogic as the application server and u201CAccess JMS Provider with JNDIu201D is the JMS provider.
To connect to external server queue do I need to create local queue at XI box using visual administrator?
what are the other other configuration steps do I need to proceed?
Thanks in advance,
kartikeya.

Hi,
For this you dont have to create any queue using VA in J2EE engine. Just pass all the relveant entires to the receiver system...including the real queue name ans user login.

CorrelationId in receiver JMS adapter.

Similar Messages

Maybe you are looking for