CorrelationSet error on TaskActionHandler Service
Hi all,
there's an error on CorrelationSet related to property taskId (propertyAlias: task/taskId) when using the Human Workflow Wizard (Pattern= sequential).
I experienced this problem running "OrderBooking" tutorial and the util StarLoanWithWorkflow. Infact every time I have to copy the output message from the TaskActionHandler Service into the receive activity (onTaskCompleted) of the main process if I want that it works properly, because the message is lost. I tried to re-set correlationSet in file TaskActionHandler.wsdl with the correct field (taskId, which is a xsd:string) and messageType="taskMngr:taskMessage" but it still doesn't work.
Thank you
Ok, I undestood! The problem occurs only if I change these properties in the BPEL Admin Panel:
- BPEL soap callback URL (http://mlr:9700)
- BPEL soap server URL (http://mlr:9700)
which I replaced with "http://localhost:9700" for portability reasons.
How can I use the worklist if I want to change these properties with "localhost" insted of my computer_name "mlr"?
Thanks
Similar Messages
-
Error in ALE Service While Creation of Vendor Master
hi,
I am using a scenario where a third party system is sending vendor master data to a R/3 system The file is picked up by the file adapter(sender) and mapped to IDOC format, using Idoc adapter (receiver). A Vendor is then created by posting the CREMAS03 IDOC into the R/3 system.
Everything goes fine till the Idoc comes into the R/3 system. There in BD87(Idoc Status Monitor), getting the "Error in ALE Service" error. When expanded further the specific error is that of "Cross-system company code xxxx does not exist". What is generally the cause of this error and how would I resolve it?
For those of you who have attended TBIT 40, this scenario is Example 1 - Creation of Vendor Master Data.
Any help would be appreciated?
regards,
SKone more thing
if you want to be sure that you're using the right data
try to set your system to send the vendor data out
first - send it from BD14
and then you'll know which fields do you need
if you do that take a look at segment E1LFB1M
and check for BURKS
Regards,
michal -
I've done it 6 times the steps you mention to get this thing to work but still it doesn't work for me. I've downloaded iTunes, installed it, and again the same message it's going on Error message received - Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
I've deleted iTunes, Apple Mobile Device Support, Apple Software Update and Bonjour, restart my computer and downloaded again (6 times) and still doesn't work for me. What should I do?I deleted all Apple products you mentioned above (iTunes, Apple Mobile Device Support, Apple Software Update and Bonjour), deleted the prior downloads I had previously tried to install and then emptied my recycle bin. Then I started with a new download of iTunes before the problem was solved for me.
It really ***** that Apple does not give any direct support for its own products.
Good Luck -
Error while running service tax program (New)
Hi
I have created S3 as interim tax code and S4 as final tax code. I assigned S4 to S3 as a target tax code. Entries are perfectly flowing.
But when i do service tax program for, session is created properly. When i run it in SM35, for gived error
"Tax code S4 may only contain one assignment line"
I have given routine 166 in OBQ3 for ECess and SHEC.
I tells me to do following procedure:
Use a different tax code.
For direct postings to a tax account, you might have to define a separate tax code for which only one line with a percentage rate other than zero is active in percentage rate maintenance. All other lines must be inactive.
Please help me.
Edited by: Deepak Agrawal on May 4, 2010 1:29 PMThere is one interim service tax code (for normal services) - S1. Final service tax code S2 is created assigned to S1 as target tax code.
Entry passed:
Exp A/c.. Dr 500000
Service Tax Basic (deferred) 50000
Service Tax ECS (deferred) 1000
Service Tax SHEC (deferred) 500
To Vendor A/c 551500
For this service tax program (new) is working fine.
For the GTA scenario where service tax is not charged in invoice but we have to pay to government, in that case i have created one interim tax code G1 and i have assigned final tax code S2.
Entry passed for GTA (invoice raised by transporter is Rs. 500000):
Exp A/c.. Dr 515000
To Service Tax Basic (deferred) 50000
To Service Tax ECS (deferred) 1000
To Service Tax SHEC (deferred) 500
To Vendor A/c 500000
But when i execute the program i can see three line items (for basic, interim and SHEC)
But when i run the session, it gives error:
Tax code S2 may only contain one assignment line.
I AM UNABLE TO UNDERSTAND, WHY ITS GIVING ERROR FOR GTA SERVICE TAX TRANSFER
Edited by: Meenu_ND on Jun 1, 2010 10:48 AM -
Error while loading service JCo RFC Provider
When I click on the "JCo RFC Provider" node under services in Visual administrator, I get an error:
"Error while loading service JCo RFC Provider"
Does anyone know what has gone wrong here, and how I go about fixing it?
Thanks in advance
Regards
Richard
PS. We're using EP6sp14You have to use the correct Visual Admin version:
if your netweaver is 6.40 use VA 6.40 ... and for 7.00 the same, VA 7.00
(you get them from OS where netweaver is installed)
other possiblity: use Administrator login and check if it works, then correct your permissions (mostyl 'Administrators' group is missing)
Regards,
Chris -
Error generating Web service /BIC/CQZDS_WEB00001000 how to over come this?
HI,
Experts,
I have created Web service source system by taking: target system BI and source system XI.
After creation of Info objects i have created data source in RSA1 there will no error displayed while CHECK but while activating the data source it was displaying errors like:
1) Error generating Web service /BIC/CQZDS_WEB00001000
2) Error when activating DataSource ZDS_WEBSERVICE BIDCLNT100
what will be the reason for this error plezase provide me good idea or provide step by step web service scenarious.
Thank you,
Shabeer Ahmed.Hi
Web AS 6.40 you can create a Web Service Proxy directly in Transaction SE80. Create a new package and right click on it. Choose Create -> Enterprise service / Web service -> Proxy object. Now you can choose how you want to provide the WSDL Source.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80fa3dff-ce76-2a10-3f94-f3df8f2db5a2 -
Error while loading service Document Services Configuration (NW 7.0 SP13)
Hello,
I'm in the process of configuring the Adobe Document Services. Now I've received the Certificate + Credentials from SAP which I requested as described in Note 736902. I try to install them according to the Adobe Document Services Configuration Guide which I've downloaded from https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/90355269-4d89-2a10-0bb9-f388704f1dcd. [original link is broken] I've copied the pfx File to /usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices/TrustManagerService/trust/credentials.
Then I started Visual Administrator and opened Server <x> → Services → Document Services Configuration. Here I get this Error returned:
Error while loading service Document Services Configuration
com.sap.engine.services.adminadapter.exception.AdminException: com/adobe/ads/service/configuration/swing/CredentialTabUI
Does anyone has a hint how I can resolve this problem?
Regards
GregorHello,
I solved this problem by restarting J2EE and the Server.
Regards
Gregor -
Error while saving service entry sheet
Hi Gurus
I m getting the following error while saving service entry sheet
Account determination for entry MGCA WRX not possible
Req. for help
EldeeHi,
Use T.code:OMWB,
Enter Chart of Account,Now you will have new screen,
Click WRX, sys will take to new screen
Click Rules,select check box of debit and credit only and save.
Now enter you G/L accounts(GR/IR) in debit and credit field and save.
Now try your transaction.
If helpful to you then reward.
Regards,
Biju K -
Error while testing Service enabled Application module-ADF11g
Hi All,
I am facing an error while testing Service enabled Application module.I have followed the documentation avaialble in this link
http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcextservices.htm#CJABABJE.
All the supporting jar files are included in the calling application, but still I am getting class not found exception.
Error is as follows…
JBO-29000: Unexpected exception caught: java.lang.RuntimeException, msg=java.lang.RuntimeException: java.lang.ClassNotFoundException: demo.model.common.serviceinterface.AppModuleService: java.lang.RuntimeException: java.lang.ClassNotFoundException: demo.model.common.serviceinterface.AppModuleService
Jdev version is 11.1.1.2.0 and
Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
Any pointers for the same is highly appreciated.
Thanks,
AnushaHi Willian,
Did you set up your "Model" Project to use the JDK 1.4 and rebuild the application ?
See " [Deploying to Application Servers That Support JDK 1.4|http://tinyurl.com/lfc6kc] "
Regards,
Didier. -
Error occured while service was processing while invoking Emp WS
Getting error <faultstring>Error occured while service was processing.</faultstring> while invoking the Employee pl/sql webservice. Below is the payload I am sending to the webservice that is deployed in R12.1 instance using iRep. Please help.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:hr="http://xmlns.oracle.com/apps/per/soaprovider/plsql/hr_employee_api/" xmlns:cre="http://xmlns.oracle.com/apps/per/soaprovider/plsql/hr_employee_api/create_employee/">
<soapenv:Header>
<hr:SOAHeader>
<hr:Responsibility>SYSTEM_ADMINISTRATOR</hr:Responsibility>
<hr:RespApplication>SYSADMIN</hr:RespApplication>
<hr:SecurityGroup>Standard</hr:SecurityGroup>
<hr:NLSLanguage>AMERICAN</hr:NLSLanguage>
<hr:Org_Id>204</hr:Org_Id>
</hr:SOAHeader>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken wsu:Id="UsernameToken-Vm6jzMWeZx220sdBFHZ93A22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>SYSADMIN</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">x</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
<cre:InputParameters>
<cre:P_VALIDATE>false</cre:P_VALIDATE>
<cre:P_HIRE_DATE>17-JUN-07</cre:P_HIRE_DATE>
<cre:P_BUSINESS_GROUP_ID>202</cre:P_BUSINESS_GROUP_ID>
<cre:P_LAST_NAME>Employee</cre:P_LAST_NAME>
<cre:P_SEX>M</cre:P_SEX>
<cre:P_PERSON_TYPE_ID>13</cre:P_PERSON_TYPE_ID>
<cre:P_PER_COMMENTS>Test</cre:P_PER_COMMENTS>
<cre:P_DATE_EMPLOYEE_DATA_VERIFIED></cre:P_DATE_EMPLOYEE_DATA_VERIFIED>
<cre:P_DATE_OF_BIRTH>01-JAN-1981</cre:P_DATE_OF_BIRTH>
<cre:P_EMAIL_ADDRESS>[email protected]</cre:P_EMAIL_ADDRESS>
<cre:P_EMPLOYEE_NUMBER>123421</cre:P_EMPLOYEE_NUMBER>
<cre:P_EXPENSE_CHECK_SEND_TO_ADDRES></cre:P_EXPENSE_CHECK_SEND_TO_ADDRES>
<cre:P_FIRST_NAME>ORACLE FORUM 3</cre:P_FIRST_NAME>
<cre:P_KNOWN_AS>Raj</cre:P_KNOWN_AS>
</cre:InputParameters>
</soapenv:Body>
</soapenv:Envelope>According to the XSD of the service, p_validate is an integer:
<element name="P_VALIDATE" type="int" db:index="1" db:type="INTEGER" minOccurs="0" nillable="true" /> -
Error Invoking Web Service Action: Status (500): null
Hi forum
I am getting an "Invoking Web Service Action: Status (500): null" error when invoking a web service action block . The BLS transaction used as a web service outputs a text string which I tested using an xacute query . while executing the transaction as a web service the tracer tells me that there is no output .
Best regards,
Antonio
I am using an xMII 11.5 installation .
[INFO ]: Execution Started At: 04:17:46
[DEBUG]: 00000.01600 Begin Transaction 'TMP45B360D9-0E02-2CF7-C4B4-F3C0B41C29E0'
[DEBUG]: 00000.01600 Begin Sequence Sequence : ()
[DEBUG]: 00000.01600 Begin Action WebService_0 : ()
[ERROR]: Error Invoking Web Service Action: Status (500): null
[ERROR]: ACTION FAILED: End Action WebService_0 : ()
[DEBUG]: 00000.11000 Begin Sequence Sequence_0 : ()
[DEBUG]: 00000.11000 Begin Action Tracer_0 : ()
[INFO ]:
[DEBUG]: 00000.11000 End Action Tracer_0 : ()
[DEBUG]: 00000.11000 End Sequence Sequence_0 : ()
[DEBUG]: 00000.11000 End Sequence Sequence : ()
[DEBUG]: 00000.11000 End Transaction 'TMP45B360D9-0E02-2CF7-C4B4-F3C0B41C29E0'
[INFO ]: Execution Completed At: 04:17:46 Elapsed Time was 94 mSJamie,
Yes Indeed, I was calling inside a web service action another BLS transaction . Now , I am using a call to the transaction using the runner . It worked fine .
Thanks, -
ABAP dump Error while creating service order in PCUI.
Hi Experts,
We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors RAISE_EXCEPTION
Date and Time 02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
| function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj PatilHi Thirumala,
Thnaks for the reply.
I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil -
"Error consuming WCF service metadata.
Object reference not set to an instance of an object."
I have no clue what happen to my BizTalk. I checked all the below forum but m clueless why BTS not consuming WCF through Generated Items. I tried both metadata exhange endpoint and metadata file through
svcutil. but all my wcf services are working fine with .net C# client.
http://blogs.msdn.com/b/appfabriccat/archive/2010/11/23/how-using-duplex-mep-to-communicate-with-biztalk-from-a-net-application-or-a-wf-workflow-running-inside-appfabric-part-1.aspx
http://msdn.microsoft.com/en-us/library/bb226552.aspx
http://msdn.microsoft.com/en-us/library/bb798122.aspx
http://masteringbiztalkserver.wordpress.com/tag/wcf-service-consuming-wizard/
I reinstall the WCF lob Adapter SDK to my BizTalk VM but still no clue. no erros in event viewer nothing.
http://www.abdulazizfarooqi.wordpress.com Abdul Aziz Farooqi [BizTalk & SharePoint Consultant] MCPD Web & MCPD SharePoint 2010Thanks from me too Neal - this worked from me. I wan't able to consume directly from exchange because the certificate is broken. However, I was able to convince Google Chrome to let me view the /Services.wsdl and from there I could save the .wsdl and two
.xsd files. In my case the problem lay at the top of the .wsdl file. I changed the following:
<wsdl:types>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://schemas.microsoft.com/exchange/services/2006/messages" schemaLocation="messages.xsd"/>
</xs:schema>
by giving the same targetNamespace as assigned in the <wsdl:definitions element, so I ended up with
<wsdl:types>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="http://schemas.microsoft.com/exchange/services/2006/messages">
<xs:import namespace="http://schemas.microsoft.com/exchange/services/2006/messages" schemaLocation="messages.xsd"/>
</xs:schema> -
Trying to install iTunes on my Laptop, running windows 7 (64-bit), but whenever I reach the end of the install, it pops up with an error telling me:
"Service 'Apple Mobile Device' (Apple Mobile Device) could not be installed. Verify that you have sufficient privileges to install system services"For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I have set up my printer and associated it with Google Cloud Printing. I have shared the printer with my daughter who is on a chromebook. When she tries to print, the printer is there and the job is sent to ePrint bu I get an error saying: "job error in external service". No documents are able to print. Google says this is an HP problem.
I have deleted the printer on my daughters account and re-shared it and reassociated it, but this does not help. On my printers page, my daughter's google account is identified as "allowed to print". But it still doesnt work. Any ideas?
This question was solved.
View Solution.Hello mapuche,
Welcome to the HP Support Forums!
Will the Laserjet P1102w accept an ePrint from any / all other areas? For example, if (on the Chromebook) you open an Email, forward the Email to the printers ePrint address, will it print?
Try logging into HPConnected, under Devices, click Settings> Open to Anyone.
Try sending a print via Google Cloud Print now with this setting enabled, let me know if it sends the print through. I have seen this straighten many issues out.
Would not be a bad idea to check for firmware updates on the printer too: HP LaserJet P1102w Firmware Update Utility<---A USB connection and Windows computer is needed.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!
Maybe you are looking for
-
Satellite P200 - Webcam stopped working after Vista upgrade
Since upgrading Vista Home Premium to Vista Ultimate the integrated webcam has not worked. I've re-installed the Camera software whch proceeds to the point of updating driver software. The process fails with the messages "Windows encountered a proble
-
HP Officejet 6500A Plus-Scan won't work
I have a 6500A Plus and I can't get my scan to work. It prints from the computer and I can fax, but when I go to scan it doesn't recconize the computer. I went to the front page and clicked register to scan and it said that it already was and there w
-
(SAP BW 3.5) Navigate attributes did not display value in BEx
Dear SAP BW Expert, I created simple queries using BEx to display data in an InfoObject. This InfoObject composed of many attributes which were set to navigate attributes. I already loaded data into this infoobject as well. After I check data in RSA1
-
802.1x Blocking port (many deviсes to one port)
Hello! On ports of the Cisco 3750 there is authentication on 802.1x (Mab). I connect the "stupid" switch (that doesn't work with 802.1x) to port and logs of Radius-server and Cisco show that it was authenticated. Then I connect the device (laptop or
-
Error: The portlet could not be contacted.
OS: Solaris Database: 8.1.7 POrtal: 3.07 When a page is bookmarked and/or set as the default page the portlets do not load without hitting refresh. I need the pages to load without this error since the pages are public. Does anyone know the work arou