Corresponding Integ. Server Configuration ?

Hi,
As per SAP documentation Corresponding Integ. Server configuration should be either
http://<host>:<port>/sap/xi/engine?type=entry
or
dest://<IntegrationServer-Destination>
In my client PI server they are using
dest://INTEGRATION_DIRECTORY_HMI
which is not correct according to SAP.
My question is would that configuration use by PI if the Role of Business System is Integration ? Since above configuration mainly for Role of Business Application Server ?
Please advise ?
Thank You and Best Regards
Fernand

Hello,
As Rajesh mentioned above the configuration does not look correct as it is at the moment.
It should look something like this:
XI System: TRX SXMB_ADMIN -> Integration Engine Configuration
 - Role of Business System: Integration Server
 - Corresponding IS: http://server:port/sap/xi/engine?type=entry
Business System: TRX SXMB_ADMIN -> Integration Engine Configuration
 - Role of Business System: Application System
 - Corresponding IS: DEST://<your_sm59_http_destination>
 <your_sm59_http_destination>: This is the RFC Destination pointing to
your XI System, that you have maintained via SM59.
Regards,
Sarah

Similar Messages

Where to set up Corresponding Integ. Server

Hi
In the SXMB_ADM Tcode in Integration Engine Configuration
for the role of business system -> Integration server i am not able to see any corresponding Integration server..
How we set up the corresponding Integration server in SXMB_ADM
venkat

Hi Venkat,
The integration server is set up in the SLD. To maintain the entry in SXMB_ADM. Role of business system: Integration server.Corresponding Integration server: http://<host>:<port>/sap/xi/engine?type=entry
host is the host name of the integration server and port is the HTTP port.
If you have already maintained this entry in your system landscape description, you can copy the entry as follows: Choose Edit -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration.
Thanks,
Manohar.
P.S: btw did you recognize me!

Integration Server configuration error

Hi all,
I have an issue with the XI Integration server configuration.
When I have tested the configuration I have detected that there is an error in the Integration server (transaction SXMB_ADM)
The value was:
http://xxx:xxxx:/sap_xi/engine?type=entry
instead of
http://xxx:xxxx/sap_xi/engine?type=entry
note that the fisrt value have : after the port number.
I have tested the SLD Bussines System configuration and had the same issue, I have solved too.
But when I execute the test for integration server in transaction SXMB_ADM i have the next message:
Corresponding Integration Server: Current Configuration <> System Landscape
For the SLD Role of Bussines System the value in this test is the old value, not the new.
Could somebody tell me if i forget something?
Thanks in advance,
RP

HI,
This is somthing related to Cache . Try to refresh Cache.
see below links regarding cache
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off
Regards
Chilla

System Landscape : Corresponding Integration server not maintained

Hi Guys,
In ECC, SXMB_ADM - > Integration Engine Configuration
Edit ->Change Global Configuration data
System Landscape tab...
It shows System Landscape : Corresponding Integration server not maintained
I have maintained the corresponding integration server in the SLD where in the business I created for ECC,
I put the business system that I have created for Integration server
Yet The error persists...any idea?
Regards,
Teja

Hi Guys,
I have done all the setting suggested,,
then came across a thread on the forum
Unable to load Integration Server data from SLD
Regarding the System Landscape button in transaction sxmb_adm -> Integration Engine Configuration,
this button is obsolete and no longer works correctly. You can ignore the error message you get.
Thanks,
Teja

Asynchronous reserve finally failed: missing name server configuration

Hi,
can anybody give me a hint why we get these errors?
"asynchronous reserveFinally failed: missing name server configuration, no logon known -> operation will be retried name reservation : name server=http://sapcoe01.bbn.hp.com:50000/, category=SAP_DevelopmentComponentName, name=hp.com/appl/tax, reservationKey=63415681, state=FINALIZE_PENDING"
The development objects are listed in SLD with status PRERES. The Name Server location is configured in DTR with the logon data. The name server is also listed in the development configuration.
Where else could be the cause for this error?
Many thanks for any hints!

Hi Martin,
Here you can see the *_PENDING items: http://<host>:50000/dtr/sysconfig/support/NameReservationList
And here you can configure the name server: http://<host>:50000/dtr/system-tools/administration/NameServerConfiguration
The solution is to define your name server a second time with a slightly different URL. The first entry you already defined probably uses the fully qualified hostname, e.g. http://<host>.mycompany.com:50000/sld/cimom. Define the same name server again but without the domain and without the /sld/cimom path, e.g. http://<host>:50000/. Actually it should correspond to what's shown in the error message, e.g. "operation will be retried name reservation : name server=http://<host>:50000/,". When you click Save Configuration, the pending items in the queue will be processed. The only problem we have left is that "after some time" the 2nd entry we just defined dissapears and we need to configure it again (and again and again...)
Kind regards,
Sigiswald

Siebel 8.1.1.11 • Error in Siebel Server Configuration

Problem Description
Hi,
I'm trying to make the Siebel Server Configuration for a new Development Environment.
After completing the Siebel Configuration Wizard I am having the following error:
2021 2014-05-28 12:40:21 2014-05-28 12:40:21 -0300 00000004 001 003f 0001 09 srvrmgr 3672 2404 D:\Siebel\8.1.1.11.0\ses\siebsrvr\log\srvrmgr.log 8.1.1.11 [23030] ENU
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (sccobjs.cpp (964) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (samisc.cpp (284) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (sasess.cpp (399) err=2555932 sys=0) SBL-SCM-00028: Key not found
Please can guide me to solve this problem
Kind regards,
Christian
Error Codes
SBL-SCM-00028
Problem Category/Subcategory
Installation (installation of FPs, QFs, PSs, Product Certification & Supported Platforms)/Siebel Server
Uploaded Files
File: srvrmgr.log;srvrcfg.log

Siebel Name Server Backing File
8.1.1.11 [23030] ENU
1.2
BAkAAAAAAAA=
Persistence=partial
Type=empty
[/enterprises]
Type=empty
[/enterprises/FUSION_SES]
Type=empty
[/enterprises/FUSION_SES/servers]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/Host]
Type=string
Value="fusion_server"
Length=26
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/ServerDesc]
Type=string
Value="Siebel Server Profile SIEBELSRVR FUSION"
Length=78
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/Lang]
Type=string
Value="ENU"
Length=6
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncStartTime]
Type=string
Value="000100"
Length=12
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/Primarylang]
Type=string
Value="ENU"
Length=6
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncPlannedCompletion]
Type=string
Value="000100"
Length=12
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncEndTime]
Type=string
Value="000100"
Length=12
[/gateways]
Type=empty
[/gateways/default]
Type=empty
[/gateways/default/version]
Type=empty
[/gateways/default/version/VersionString]
Type=string
Value="8.1.1.11 SIA [23030] ESN"
Length=48
[/gateways/default/definition]
Type=empty
[/gateways/default/definition/name]
Persistence=full
Type=string
Value="default"
Length=14
[/gateways/default/definition/full name]
Persistence=full
Type=string
Value="Siebel Gateway"
Length=28
[/gateways/default/definition/description]
Persistence=full
Type=string
Value="Siebel Gateway Server"
Length=42
[/gateways/default/definition/enable state]
Persistence=full
Type=string
Value="enabled"
Length=14
[/gateways/default/definition/object id]
Persistence=full
Type=integer
Value=0
[/gateways/default/attributes]
Type=empty
[/gateways/default/attributes/UseDefault]
Type=string
Value="SBA_82"
Length=12
[/gateways/default/attributes/CreateDefault]
Type=string
Value="SBA_82"
Length=12

WIndows 7 64-bit system printing to a Windows 2000 server configured as a print server

Is there any way to configure a new Windows 7 64-bit computer to use a Windows 2000 server configured as a print server ?
The printer that I would like to connect to is an HP 4240n LaserJet. I appears that there is only a 64-bit Universal Print Driver available. The server currently uses HP 32-bit PCL5e or PCL6 drivers for all other connected computers. Connection is through a Hewlett-Packard Network Port, using DLC/LLC transport for the embedded 4240n print server.
Installing the HP 64-bit UPD to the WIndows 7 64-bit system, and then attempting to redirect the local port to the Win2k network print server has not worked.
Thanks for any advice.

Hi:
See if this works...
Run msconfig.
In the System Configuration screen, Boot tab, Advanced Options, if there is a check mark in the box next to Maximum memory. Remove that checkmark and save your changes.
Reboot and hopefully Windows recognises all the Ram ( minus the reserved ) after restarting.
Please give that a try, and post back and let us know if that frees up some system memory for you.
Paul

Printer Server configuration for APEX 3.1.2 in 10g XE

I have APEX3.1.2 installed in 10g XE and I am going thorough the OTN tutorial "[Oracle Application Express 3.0-- Building a Functional Application"|http://www.oracle.com/technology/obe/apex/obe30/apexdev30.htm#l7] in the section "Editing Application Objects".
When I click "Print Attribute" of a page region, it displayed "{color:#ff0000}Report printing is currently not available, there is no print server configured{color}".
Can you tell me what this means and how to resolve it. All I have is APEX3.1.2 installed in 10gXE.
I have searched this forum and it seems that I have to install/configure a printer server?
Thanks!
Kevin

Dan,
I have the same problem as Kevin.
Your answer to his question can be very helpful. But if I follow the link you provide, I cant find the step 5.2.
Step 5.1 is clear. But what are the tasks of step 5.2?
I hope that you can tell me this.
Thank you.
Carlos

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1st of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace: at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
 at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
 at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
 at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
 at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
 at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
 at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

Is it possible to have different authentication mode for SQL Server Database Engine and corresponding SQL Server instance?

Hi,
I have installed the x64 SQL Server 2008 R2 Express with default settings and run MBSA 2.3 (using default settings too). It shows three SQL Server instances: MSSQL10_50.SQLEXPRESS, SQLEXPRESS and SQLEXPRESS (32-bit). For the first, authentication
mode is Windows, for the rest two - mixed. Here https://social.msdn.microsoft.com/Forums/sqlserver/en-US/03e470dc-874d-476d-849b-c805acf5b24d/sql-mbsa-question-on-folder-permission?forum=sqlsecurity question
about such multiple instances was asked and the answer is that "MSSQL10.TEST_DB
is the instance ID for the SQL Server Database Engine of the instance, TEST_DB", so in my case, it seems that MSSQL10_50.SQLEXPRESS is the instance ID for SQL Server Database Engine of the SQLEXPRESS instance.
I have two questions:
1) How can it be that SQL Server DB Engine instance has different authentication mode than corresponding SQL Server Instance?
2) Why 32-bit instance reported although I installed only 64-bit version?
Also, this https://social.technet.microsoft.com/Forums/security/en-US/6b12c019-eaf0-402c-ab40-51d31dce968f/mbsa-23-reporting-sql-32bt-instance-is-running-in-mixed-mode-when-it-is-set-to-integrated?forum=MBSA question seems to be related to this
issue, but there is no answer :(.
Upd: Tried on clean Windows 8 installation and Windows 7 with the same result.

Because I DO NOT want the three people who will be having access to the production SQL Server to also have access to the primary host ProductionA. Since I have to allow them to RDC into the box to manage the SQL Server, I figure why not create
a separate VM for each one of them and they can RDC into those instead.
Does this make any sense?
Any tips are greatly appreciated. The main reason for doing this is because the three people who will be accessing the box, I need to isolate each one of them and at the same time keep them off of the primary ProductionA.
Thanks for your help.
M
Hello M,
Since you dont want the 3 guys to have access to Production machine A.You can install SQL Server client .By client i mean SQL server management studio(SSMS) on there local desktop and then create login for them in SQL Server.Open port on which your SQL server
is running for three of the machines so that they can connct.Now with SSMS installed on each machine each can connect to SQL server from there own machine.
I would also like you to be cautious with giving Sysadmin privilege to all three of them ,first please note down what task they would do and then decide what rights to be provided.
Your option will also work but you need to create 3 VM for that .Which is more tedious task.
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB

I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfully

Whenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin

URL file-access is disabled in the server configuration

My hosting company has made a server config change and my xslt pages have stopped working with the following error.
It says url file access is disabled but my phpinfo() still shows allow_url_fopen = on
What else might be the problem?
Warning: require_once() [
function.require-once]: URL file-access is disabled in the server configuration in
/homepages/0/xxx/htdocs/xxxx/inc/horoscope_xml.php on line
3
Warning: require_once(
http://www.xxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php) [
function.require-once]: failed to open stream: no suitable wrapper could be found in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3
Fatal error: require_once() [
function.require]: Failed opening required 'http://www.xxxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php' (include_path='.:/usr/lib/php5') in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3

bikeman01 wrote:
I don't understand your use of the word 'class' in your reply - I am using php not asp.net.
The name of the file that you are trying to access is MM_XSLTransform.class.php. It is a PHP class created by Dreamweaver for the XSL Transformation server behavior.
The servers php is 5.2.11, as it has been for sometime, so I know that it previously worked with allow_url_fopen = on and allow_url_include = off
Judging from the error message, you are trying to include the file using a URL, rather than a file path:
Fatal error: require_once() [
function.require]: Failed opening required 'http://www.xxxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php' (include_path='.:/usr/lib/php5') in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3
Change the URL to a file path:
require_once('/homepages/0/xxxx/htdocs/includes/MM_XSLTransform/MM_XSLTransform.class.php');
Is it possible for phpinfo() to show allow_url_fopen = on yet be actually off on the server?
No.
[Edited to correct name of server behavior]

NWDI for the 04s preview fails with 'SLD name-server configuration error'

After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.

Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan

Regd.UDDI server configuration in PI 7.1 and services registry

Hi ,
i have gone through many forum posts before posting this , so expecting a genuine answer:) which can be rewarded:).
I am using PI 7.1 and trying to taste the services registry flavour of it.
i followed the SAP Note 1267817 - Configure Services Registry proxy , but i am not able to assign the roles
SERVICES_REGISTRY_READ_ONLY or SERVICES_REGISTRY_READ_WRITE in Su01.
i get a message that such a role doesnt exist at all.
Qn1:Do i need installed any software componet like UDDI etc, or do in need to have uddi server
configured for this , if yes how to do that..
I have seen the help.sap link : I am struck at the point "Discovery URL host name", according to the help.sap it will come automatically , but in my case it has some Rivalry.
Qn2:How to configure UDDI server n PI 7.1
, any step by step guide which applies to PI 7.1 will help.
Qn3:What is the relation between tcode soamanager, services registry and UDDI
Qn4: I am not able to search my services in soamanager->business administration->WS administration
I have activated the services (Webservice Runtime)as mentioned in the Blog
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d06b6392-cde7-2c10-8f8b-bdea5d781dd9

Thanks Raj,
This property specifies a URL for the host name of the *physical machine where the Discovery
API of the UDDI server is located.* Its value is set automatically by default.
I am not able to understand this present in [help.sap |http://help.sap.com/saphelp_nwpi71/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm]
what may be the reason for not able to assign the above roles as per the sap note given above?
Is there any componet needs to be installed line UDDI?Can a technical user role have this roles
accepted,i used my ID for configuration XI super user!
After following the note partially i.e w/o giving the user roles. when in rt click sender agreement and say publish
it slaps me with this error
Com.sap.aii.ib.core.uddi.RegistryCleintException:
A save request exceeded the quantity limits u2026Number of Business Entries Exceeds Your limit of 1(2)
But if i open Services registry i can see that service got published.when i test in WS navigatore it
gives 503 service unavailable error.
How to delete unused published services
. Initialy i took the wsdl URL generated from
disply WSDL and published using publish tab in Services Registry , they dont have any key associated.
How to delete them?I can see any direct option
Regards,
Abhi

Weblogic Admin server - Configuration/Server Start/Arguments ignored?

Hi,
I'm trying to specify a http proxy for a WebLogic Admin Server in order for an application to access external resources. I've placed the settings into the "Server Configuration / Server Start / Arguments", and verified that they have been saved into the config/config.xml file for that domain:
<server-start>
<arguments>-Dhttp.proxyHost=[XXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXX]</password-encrypted>
</server-start>
However, no matter how I start the server, these settings are ignored despite that the documentation states these should be added to the java command line.
starting weblogic with Java version:
java version "1.6.0_19"
Java(TM) SE Runtime Environment (build 1.6.0_19-b04)
Java HotSpot(TM) 64-Bit Server VM (build 16.2-b04, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sysext_manifest_classpath weblogic.Server
As a test I created a new managed server in the same domain, specifying the same startup properties, and they were picked up during startup.
If I manually place the settings into the bin/setDomainEnv.cmd batch file for the domain they are also picked up and work.
Is there an undocumented restriction on Admin Servers that they ignore the "Server Start / Arguments" setting, or is there something else I can check as to why this is not working?
Many thanks,
- Micha.

Umm... I already pasted the relevant snippet out of the config.xml, but following is the entire file. The startup arguments, as specified in the admin console, are:
-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080
which matches what is saved in the config.xml.
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd">
<name>wls_starter</name>
<domain-version>10.3.2.0</domain-version>
<security-configuration>
<name>wls_starter</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
<sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator" xsi:type="pas:system-password-validatorType">
<sec:name>SystemPasswordValidator</sec:name>
<pas:min-password-length>8</pas:min-password-length>
<pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
</sec:password-validator>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
<node-manager-username>weblogic</node-manager-username>
<node-manager-password-encrypted>[XXXXXXXX]</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<max-http-message-size>-1</max-http-message-size>
<ssl>
<enabled>false</enabled>
</ssl>
<log>
<file-name>logs/AdminServer.log</file-name>
<rotation-type>bySize</rotation-type>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-min-size>500</file-min-size>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Trace</logger-severity>
<logger-severity-properties></logger-severity-properties>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Debug</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>false</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<machine>[XXXXXXXXXX]</machine>
<listen-port>8080</listen-port>
<listen-port-enabled>true</listen-port-enabled>
<web-server>
<frontend-http-port>0</frontend-http-port>
<frontend-https-port>0</frontend-https-port>
<keep-alive-enabled>true</keep-alive-enabled>
<keep-alive-secs>30</keep-alive-secs>
<https-keep-alive-secs>60</https-keep-alive-secs>
<post-timeout-secs>30</post-timeout-secs>
<max-post-size>-1</max-post-size>
<send-server-header-enabled>false</send-server-header-enabled>
<wap-enabled>false</wap-enabled>
<accept-context-path-in-get-real-path>false</accept-context-path-in-get-real-path>
</web-server>
<listen-address></listen-address>
<java-compiler>javac</java-compiler>
<tunneling-enabled>false</tunneling-enabled>
<tunneling-client-ping-secs>45</tunneling-client-ping-secs>
<tunneling-client-timeout-secs>40</tunneling-client-timeout-secs>
<server-start>
<arguments>-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXXXXX]</password-encrypted>
</server-start>
<server-life-cycle-timeout-val>30</server-life-cycle-timeout-val>
<startup-timeout>0</startup-timeout>
<graceful-shutdown-timeout>30</graceful-shutdown-timeout>
<ignore-sessions-during-shutdown>false</ignore-sessions-during-shutdown>
<client-cert-proxy-enabled>false</client-cert-proxy-enabled>
</server>
<embedded-ldap>
<name>wls_starter</name>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.2.0</configuration-version>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>[XXXXXXXXXX]</name>
</machine>
<jms-server>
<name>WseeJmsServer</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<jms-server>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<self-tuning>
<work-manager>
<name>weblogic.wsee.mdb.DispatchPolicy</name>
<target>AdminServer</target>
</work-manager>
</self-tuning>
<file-store>
<name>WseeFileStore</name>
<directory>WseeFileStore</directory>
<target>AdminServer</target>
</file-store>
<jms-system-resource>
<name>WseeJmsModule</name>
<target>AdminServer</target>
<sub-deployment>
<name>BEA_JMS_MODULE_SUBDEPLOYMENT_WSEEJMSServer</name>
<target>WseeJmsServer</target>
</sub-deployment>
<descriptor-file-name>jms/wseejmsmodule-jms.xml</descriptor-file-name>
</jms-system-resource>
<jms-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<sub-deployment>
<name>[XXXXXXXXXX]</name>
<target>[XXXXXXXXXX]</target>
</sub-deployment>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jms-system-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jdbc-system-resource>
<saf-agent>
<name>ReliableWseeSAFAgent</name>
<target>AdminServer</target>
<store>WseeFileStore</store>
</saf-agent>
</domain>

Corresponding Integ. Server Configuration ?

Similar Messages

Maybe you are looking for