Corresponding table in the source system does not contain any data -URGENT

Hi Guru's,
I have already uploaded master data.
I have created infosource added infoObjects to it and activated it to create communication strucure.
M using RSA1OLD transaction.
and assigned datasource to infosource ie source system name and clicked ok.
save datasource to infosurce assigned msg displayed, clicked ok.
transfer rules r created, i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv
in datatargets tab selected data target as infocube. n then in schedule tab start data load immediately and clicked ok.
everything is fine upto schedule n in monitor it does not display any data.
what will be the problem??

i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv ??
Are you loading the data from flat file or R3? If you are loading it from R3, why are you giving the Flat file name?
In this case, check in RSA3 (R3 side), whther the datas source is getting the value.
In case you are loading a flat file, you need to create a flat file data source and assign to the infosource.
Thanks..
Shambhu

Similar Messages

Get an Error window, The source folder does not contain any supported camera raw files

I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
Esther

Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

MDT 2013 The source directory does not contain an identifiable operating system

Hi,
I am using MDT 2013 and I am trying to deploy server 2008 in it. I mount my 2008 iso file, import OS, then select full set of source files, and enter D:\ . It says, "The source directory does not contain an identifiable operating system". I am
sure that install.wim file is present in sources folder. What other folders/files does it need while importing OS?
Note: it is an customized OS. It has MS hotfixes and dotnet 4.5 installation package in it.
Chaitanya.
Chaitanya.

Hi,
I am using MDT 2013 and I am trying to deploy server 2008 in it. I mount my 2008 iso file, import OS, then select full set of source files, and enter D:\ . It says, "The source directory does not contain an identifiable operating system". I am
sure that install.wim file is present in sources folder. What other folders/files does it need while importing OS?
Note: it is an customized OS. It has MS hotfixes and dotnet 4.5 installation package in it.
Chaitanya.
Chaitanya.
This is expected behavior because Server 2008 is unsupported in MDT 2013:
http://deploymentresearch.com/Research/Post/330/What-if-I-told-you-The-OSD-Support-Matrix-for-MDT-and-ConfigMgr-is-here
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Managed System Configuration ! The table does not contain any data !

Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
Thanks

Hi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali

Source not found: The source attachment does not contain the source........

Source not found: The source attachment does not contain the source for the file ClassLoader.Class
Hey,
I'm running eclipse Version: 3.2.2 Build id: M20070212-1330, on a Vista Home Premium Toshiba laptop. Everything was working fine before i installed the Java JDK 5 and JDK 6. Now all of sudden when i try to run one my programs that worked in the past i get the following error:
java.lang.UnsupportedClassVersionError: Bad version number in .class file
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.access$100(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Exception in thread "main"
I'm not sure where to go from here...I've looked up a few articles that mention going into some system.ini files...etc... to make sure the variable are ok but i feel like i'm getting in over my head.
Thanks in advance for your thoughts,
Struggling to Run

Ok...after I thought everything was going well enough.... problems are arising.
Here's where I'm at and that will include how i got a "nano" error. After a lot of late night messing around I ended up installing a few important component that seem to have done some good. Firstly i installed j2sdk-1_4_2_18-windows-i586-p and ended up with a few good things. Windows was happy when i changed the path variables in the environment setting to point to the newly created c:\program files\java\j2re1.4.2_18\bin folder. This allowed me to start up eclipse properly and use some functions in CMD. In CMD when i use the command java -version it reads Java version 1_.4_.2_1_8. Next i installed the j2sdk-1_4_2_13 jre 1.6.0 environment and ended up with a new folder in C:\Program Files\Java\jre1.6.0 as well.
with the two environments installed i thought i was ready fro the next step.
I got started on eclipse and now that it was opening i was feeling good. Next i opened window --> preferences --> java --> installed jre's and i started adding things like crazy. My current list of comprised of many things which I'm certain should all be there at this point so I'll list them:
j2sdk1.4.2_13 - C:\j2sdk1.4.2_13
j2re1.4.2_18 - C:\Program Files\Java\j2re1.4.2_18
j2sdk1.4.2_18 - C:\j2sdk1.4.2_18\jre
j2sdk1.6.0 - C:\Program Files\Java\jre1.6.0
jdk1.6.0 - C:\Program Files\Java\jdk1.6.0
I've set the preferred jre to be set to jdk1.6.0 - C:\Program Files\Java\jdk1.6.0 and it seems to work for all of my programs that do not have the input.scanner. However for the projects that do have this method i get a few different errors:
1___________
java.lang.NoClassDefFoundError: couponCounter/CouponCounter
Exception in thread "main"
2__________
Exception in thread "main" java.lang.Error: Unresolved compilation problem:
     Syntax error, insert "}" to complete ClassBody
     at BensCalculator.main(BensCalculator.java:112)
Now i feel like the second error is lying to me because i know that bit of code is written properly.... i believe it is related to a problem not locating the proper classes.
Anyhow I'm still pushing along but some help at this point would be much appreciated. It's very weird some things with the scanner are working now..... I don't know I'm not totally convinced yet everything is OK.
Thank you

The source drive does not contain the HP Recovery Image

I'm trying to create a bootable USB stick with the Recovery disk creation utility of HP. After having moaned that my 8560w was running on battery, and that there was no room on a 16 GB FAT32 formated USB stick, I finally came to the next screen that says "The source drive does not contain the HP Recovery Image" which is wrong: partition D is primary, contains the recovery disk. So what ? No way to create a recovery disk ? Note also that I have no Recovery Manager (???) and that F11 has never worked (??????). HP decision to get out of the PC business is probably the best thing that could happen to customers.
pher
This question was solved.
View Solution.

Hi,
Check the below link:
Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7)
Quote from this document:
"Use a blank USB flash drive with at least 32 GB of memory. HP recommends using a name brand from a manufacturer you trust."
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

CAT2 Time sheet does not contain any data on PPMDT

Hi Experts,
I have submitted my timesheet through CAT2 ,this timesheet data is triggered and go throught the task 'TS31000007' .
but when i open tcode PPMDT ,i am able to see my my timesheet in manager desk.
issues is when manager was click on timesheet to do some action,Manager got the message like 'no data found'.
Please help me here,if anyone accross this situation.
Thanks in advacne.
Regards,
Kiran J

Sounds to me like an authorisation issue. Maybe follow up with your security/authorisation team?

Migo cannot be done " PO does not contain any selectable items"

Dear SAP Gurus
We have a very urgent issue, while trying to do MIGO for a particular standard PO.
Some down payments have been done to this PO already and now when we try to do the MIGO, system is giving the error "PO does not contain any selectable items"
The accounting document which is created when the down payment is done can be seen in the purchase order History.
Please suggest soem solution
Thanks
kk

Hi Kavitha,
Please check whether all the po item quantities are received. If any open line items are there then go to item detail po tab in that Select Confirmation Tab and Check whether the confirmation is Z001. Change it to 0001 etc and save.
Try this, if unresolved revert back.
Reg,
Ashok
Assign points if useful.

Upload and Download Errror " File does not contain valid data"

We are on the ECC 6.0 Unicode system.
I dowloaded the Role from QA server and tried to upload into DEV box.
I am getting the Error " File does not contain valid data".
However, when I downloaded the Role, it was done successfully.
Please let me know if anyone has that problem.
Thanks,
From
PRANAV

This is what I see here.
DATE 20090716 131756RELEASE 700LOADED_AGRS Z_BI_HR_REPORTING_FUNCTIONALAGR_DEFINE 210Z_BI_HR_REPORTING_FUNCTIONAL PTHAKER 20080523131557000000000000000PTHAKER 20090709142400000000000000000AGR_TCODES 210Z_BI_HR_REPORTING_FUNCTIONAL TRRRMX X 00000AGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000001S_RFC T-BD90003500 U O000004Authorization Check for RFC AccessAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000002S_RS_AUTH T-BD90003500 U O000013BI Analysis Authorizations in RoleAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000003S_RS_COMP T-BD90003500 U O000016Business Explorer - ComponentsAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000004S_RS_COMP1T-BD90003500 U O000023Business Explorer - Components: Enhancements to the OwnerAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000005S_RS_FOLD T-BD90003500 U O000029Business Explorer - Folder View On/OffAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000006S_RS_HIER T-BD90003500 U O000032Data Warehousing Workbench - HierarchyAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000007S_RS_ODSO T-BD90003500 U O000038Data Warehousing Workbench - DataStore ObjectAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000008S_RS_PARAMT-BD90003500 U O000045Business Explorer - Variants in Variable ScreenAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000009S_TCODE T-BD90003500 S O000009Transaction Code Check at Transaction StartAGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000001S_RS_COMP T-BD90003500 RSZCOMPTP CKF U O000021AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000002S_RS_COMP T-BD90003500 RSZCOMPID * U O000020AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000003S_RS_COMP1T-BD90003500 RSZCOMPID ZHCM* U O000025AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000004S_TCODE T-BD90003500 TCD RRMX S O000010AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000005S_RS_HIER T-BD90003500 ACTVT 71 U O000033AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000006S_RS_HIER T-BD90003500 RSHIENM * U O000034AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000007S_RS_HIER T-BD90003500 RSIOBJNM * U O000035AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000008S_RS_HIER T-BD90003500 RSVERSION * U O000036AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000009S_RS_PARAMT-BD90003500 PARAMNM * U O000047AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000010S_RS_COMP T-BD90003500 RSINFOAREAZPA_ECM* U O000018AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000011S_RS_ODSO T-BD90003500 RSINFOAREAZPA_ECM* U O000040AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000012S_RS_COMP1T-BD90003500 RSZCOMPID ZPAOS* U O000025AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000013S_RS_ODSO T-BD90003500 ACTVT 03 U O000039AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000014S_RS_COMP1T-BD90003500 RSZCOMPID ZPAPA* U O000025AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000015S_RS_ODSO T-BD90003500 RSODSOBJ * U O000041AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000016S_RS_ODSO T-BD90003500 RSODSPART DATA U O000042AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000017S_RS_ODSO T-BD90003500 RSODSPART DEFINITION U O000042AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000018S_RS_ODSO T-BD90003500 RSODSPART EXPORTISRC U O000042AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000019S_RS_ODSO T-BD90003500 RSODSPART UPDATERULE U O000042AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000020S_RS_COMP T-BD90003500 ACTVT 03 U O000017AGR_1251

ITunes 9.2 XML file does NOT contain any iBooks information

I have a little script that I have that generates a webpage to list what is in my iTunes library. I noticed that the XML file does not contain ANY information about iBooks or PDFs that you import. Any idea why that is? If my main library file gets corrupt, and I have to use the XML file to rebuild, I would lose all the iBook information....
Seems like a oversight by the iTunes people

why did Apple even make an XML file in the first place as initially most things in iTunes (following your logic) would be purchases from the iTunes store.
Incorrect. The existence and use of iTunes significantly predates the existence of the iTunes Store. iTunes was initially designed to get its content from CDs. The XML file was for use by other apps such as iMovie or third-party apps to have access to the iTunes library so as to be able to locate tracks and playlists for use in the app.
Anyway, I'm not interested in arguing with you about the matter.
Apple, plus put iBooks stuff in the XML file!
http://www.apple.com/feedback

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

Source system restore - Source system does not exist

Hello friends,
We have a problem. Now we have a new test system QA2. From BW system source system connection was configured for older test source system QA1.
We needed to route this source system to new system. I tried with changing RFC of QA1 to QA2 details.
Now, when i check RSA1 source system Check for QA1, i get this error :
Port 'A000000103 ' of type 'ALE ' does not exist
No destination exists to source system QA1
I can see this source system in RSA1 in BW. However, in WE21 port is not available now.
Please suggest.
I do not have to lose transfer rules/PSA tables..etc.
thanks
ashish

I get this when i try to restor connection :
Source system does not exist
Message no. RSAR175
Diagnosis
You have specified that you want to restore source system QA2. This source system is not known in BI.
System Response
The source system is not restored.
Procedure
Recreate the source system.
If the source system should be known to BI, the name of source system QA2 may be incorrect. Rename the source system and try the function again.

Corresponding table in the source system does not contain any data -URGENT

Similar Messages

Maybe you are looking for