Corruct VMWare for WebLogic Platform 8.1 SP4 for Red Hat Linux

Hi,
I have downloaded the image *.zip file following instructions in http://dev2dev.bea.com/wlplatform/vmware/index.html
(I have try all the download locations Asia, Europe and Noth America) BUT when I try to unziped it, one of the files is corrupt?
Does any one know how do I contact BEA support to inform them and where can I download an error free *.zip image?
Cheers,
Carlos
Message was edited by:
carestra

Hi,
I've got the same problem. dbassist and svrmgrl give me the same errors.
I'm using Oracle 8.1.6.1.0 on Mandrake 7.1. With the 2.2.15-4mdksecure kernel.
SVRMGR> CONNECT INTERNAL
Connected
SVRMGR> STARTUP NOMOUNT
ORA-00445: background process "PMON" did not start after 120 seconds
SVRMGR> (SQL stuff...)
ORA-03114: not connected to ORACLE
Any ideas?
This is driving me nuts!!!
Thx
Johan
null

Similar Messages

Configuring startWebLogic.sh for Red Hat Linux 7.2

I was successful in configuring and executing startWeblogic.cmd, but have not been
so lucky getting the equivalent to run on Red Hat 7.2 using startWebLogic.sh.
For starters, even before I began editing startWeblogic.sh and just tried running
I received the following error:
: command not found
: command not found
: command not found
: command not found
startWebLogic.sh: line 59: syntax error near unexpected token `elif'
'tartWebLogic.sh: line 59: `elif [ ! -f $WL_HOME/lib/weblogic.jar ]; then
I've included both my startWebLogic.cmd and startWebLogic.sh files so that you
can see what I'm trying to port to the sh file. I'm hoping I'm close to getting
this to execute and run within Linux so please accept my thanks in advance to
anyone who might have some suggestions. Interestingly enough I was able to get
wls to start using ant, but that is obviously only good for my development env.
The point being I'm hoping I'm close to reaching a solution.
Below is what my startWebLogic.cmd file looks like:
@echo off
@rem This script can be used to start WebLogic Server. This script ensures that
@rem the server is started using the config.xml file found in this directory and
@rem that the CLASSPATH is set correctly. This script contains the following variables:
@rem
@rem JAVA_HOME - Determines the version of Java used to start
@rem WebLogic Server. This variable must point to the
@rem root directory of a JDK installation and will be set
@rem for you by the WebLogic Server installer. Note that
@rem this script uses the hotspot VM to run WebLogic Server.
@rem If you choose to use a JDK other than the one
@rem included in the disribution, make sure that the JDK
@rem includes the hotspot VM. See the WebLogic platform support
@rem page (http://e-docs.bea.com/wls/platforms/index.html)
@rem for an up-to-date list of supported JVMs on Windows NT.
@rem
@rem When setting these variables below, please use short file names (8.3).
@rem To display short (MS-DOS) filenames, use "dir /x". File names with
@rem spaces will break this script.
@rem
@rem jDriver for Oracle users: This script assumes that native libraries
@rem required for jDriver for Oracle have been installed in the proper
@rem location and that your system PATH variable has been set appropriately.
@rem For additional information, refer to Installing and Setting up WebLogic
@rem Server (http://e-docs.bea.com/wls/docs61/install/index.html).
SETLOCAL
cd ..\..
title WebLogic Server
@rem Set user-defined variables.
set JAVA_HOME=T:\bea\jdk131
if "%CLOUDSCAPE_HOME%"=="" set CLOUDSCAPE_HOME=T:\Cloudscape_3.6
if "%LOG_HOME%"=="" set LOG_HOME=T:\jakarta-log4j-1.2
if "%JIKES_HOME%"=="" set JIKES_HOME=T:
if "%BAS_ORACLE_HOME%"=="" (set ORAPATH=) else (set ORAPATH=%BAS_ORACLE_HOME%\ORA90\JDBC\LIB\classes12.zip;%BAS_ORACLE_HOME%\ORA90\JDBC\LIB\nls_charset12.zip;)
@rem Check that script is being run from the appropriate directory
if not exist lib\weblogic.jar goto wrongplace
goto checkJDK
:wrongplace
echo startWebLogic.cmd must be run from the config\blueagave directory. 1>&2
goto finish
:checkJDK
if exist "%JAVA_HOME%/bin/javac.exe" goto runWebLogic
echo.
echo Javac wasn't found in directory %JAVA_HOME%/bin.
echo Please edit the startWebLogic.cmd script so that the JAVA_HOME
echo variable points to the root directory of your JDK installation.
goto finish
:runWebLogic
echo on
set PATH=.\bin;%PATH%
set CLASSPATH=.;%ORAPATH%.\lib\weblogic.jar;%CLOUDSCAPE_HOME%\lib\cloudscape.jar;%LOG_HOME%\dist\lib\log4j-1.2.jar;.\config\blueagave\serverclasses
echo off
echo.
echo ***************************************************
echo * To start WebLogic Server, use the password *
echo * assigned to the system user. The system *
echo * username and password must also be used to *
echo * access the WebLogic Server console from a web *
echo * browser. *
echo ***************************************************
@rem Set WLS_PW equal to your system password for no password prompt server startup.
set WLS_PW=xxxx
@rem Cloudscape-specific defines
set CLOUDSCAPE_DEFINES=-Dcloudscape.system.home=./config/blueagave/data -Dcloudscape.storage.pageCacheSize=200
-Dcloudscape.language.statementCacheSize=200
@rem Set Production Mode. When set to true, the server starts up in production
mode. When
@rem set to false, the server starts up in development mode. The default is false.
if "%STARTMODE%"=="" set STARTMODE=true
@rem Add the following -D option to the JVM WL start-up command (after %CLASS_PATH%)
to change
@rem the query execute mode. The default is JDBC_ONLY and the other choices are
EIS_ONLY,
@rem BOTH_JDBC and BOTH_EIS (the two "BOTH_XXXX options internally execute both
versions of the
@rem query but only the results of the _XXXX form are returned to the query submitter).
@rem -Dcom.blueagavesoft.query.ExecMode=BOTH_JDBC
echo on
"%JAVA_HOME%\bin\java" -hotspot -Xms192m -Xmx192m -XX:MaxPermSize=64m -classpath
"%CLASSPATH%" -Dweblogic.Domain=blueagave -Dweblogic.Name=baserver -Dbea.home=T:\bea
-Dweblogic.management.password=%WLS_PW% -Dweblogic.ProductionModeEnabled=%STARTMODE%
%CLOUDSCAPE_DEFINES% -Djava.security.policy==T:\bea\wlserver6.1/lib/weblogic.policy
%JAVA_DEBUG% weblogic.Server
goto finish
:finish
cd config\blueagave
ENDLOCAL
[startWebLogic.sh]

Thanks Micheal!
"Michael Young" <[email protected]> wrote in message
news:[email protected]..
Hi.
download here: http://commerce.bea.com/downloads/weblogic_server.jsp
installation instructions here:
http://edocs.bea.com/wls/docs61/install/index.html
Regards,
Michael
Help Needed wrote:
Hi All
Where can i download weblogic for red hat linux 7.2? Does that come
with
instruction on how to install it and if not where can i find the
instruction!!
Any will will be appricated.
Michael Young
Developer Relations Engineer
BEA Support

Weblogic 6.0 sp1 crashes on Red Hat Linux 6.2

When we test our application consisting of JSP, servlets(No EJB) on Weblogic 6.0
sp1 , Red Hat Linux 6.2 with more than 25 users It gives following errors and
stops servicing requests.
<Aug 28, 2001 7:25:17 PM GMT-07:00> <Error> <Posix Performance Pack> <Uncaught
T hrowable in processSockets java.io.IOException: unexpected result from poll:
-1
at weblogic.socket.PosixSocketMuxer.poll(Native Method) at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java
:371) at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:
23) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>

I don't think you need change that parameters and make.
there is a post not far from here says you can set those parameters in /etc/sysctrl.conf, then reboot.
I didn't set any parameters, I checked them, they are different
names from those in ICG, and for those with same names, they are much higher in my system. So, I just go with them, and OK.

Jinitiator for Red Hat Linux Enterprise Edition 3

Hello Technocrats,
I need your reply for our very critical situation asap.
We have Red Hat Linux EE 3 hosted in all developers PC. Oracle Application 11.5.5 is hosted in a Sun Ultra1 server. Now we have licence for Oracle Developer Suite 10g for RH Linux 3.
My question is , will Oracle Jinitiator for the OS compatible be installed at time of iDS installation??
do we need to grab any specific Oracle Jinitiator for E-Business Suite in this regard??
Is Oracle Jinitiator avbl for Linux platforms. If not wat will be the solution for executing a E-Business module form in a Mozilla web browser in Linux Pc's
Kindly give all your valuable suggestions asap....... awaitng your reply

See http://www.oracle.com/technology/products/forms/htdocs/10g/clientsod_forms10g.html for information on officially supported configs.
The only certification I can see for Redhat is using Sun JPI 1.4.2. The Sun JPI certification was added with the latest patchset (9.0.4.2.0). I know Oracle was planning on certifying Forms 10.1.2 for Sun JPI 1.4.2 and 1.5, but I'm not sure if they managed in the end. Forms 10.1.2 is already available.
We decided to go for Sun JPI and not JInitiator because we have hundreds of external users. Their sysadmins are much more comfortable installing Sun JPI then they are installing the (unknown) Oracle JInitiator.
I've written a number of blog articles about our Sun JPI confguration at http://www.oratransplant.nl/category/oracle/forms/

Can't install Oracle 9i for Red Hat Linux AS3

I can't install Oracle Database 9i for Red Hat Enterprise Linux.
Please see messages following:
[oracle@rhas3 oracle]$ /mnt/cdrom/install/linux/runInstaller
Initializing Java Virtual Machine from /tmp/OraInstall2004-01-30_03-31-11PM/jre/bin/java. Please wait...
/tmp/OraInstall2004-01-30_03-31-11PM/jre/bin/i386/native_threads/java: error while loading shared libraries: libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory
[oracle@rhas3 oracle]$rpm -qa|grep libstdc++|less
libstdc++-3.2.3-20
libstdc++-ssa-3.5ssa-0.20030801.41
libstdc++-devel-3.2.3-20
libstdc++-ssa-devel-3.5ssa-0.20030801.4
anybody know how to install for RH AS3, I have tried many time to find out the libraries but still not work and I've plan for RAC also.
Ched

Did you carefully go through all pre-req steps for install?
Oracle needs some "compatibility libraries" as well (compat-lib*). Here are packages for AS 10g, most or all of which apply to Database too.
Checking operating system packages: gcc-3.2.3-20,compat-gcc-7.3-2.96.122,compat-gcc-c++-7.3-2.96.122,compat-libstdc++-7.3-2.96.122,compat-libstdc++-devel-7.3-2.96.122,setarch-1.3-1,pdksh-5.2.14,sysstat-4.0.7,gnome-libs-1.4.1.2.90-34.1,libstdc++-3.2.3,compat-libstdc++-devel-7.3-2.96.122,compat-glibc-7.x-2.2.4.32.5
When required packages are in place, there's another error lurking, related to __libc_wait symbol.
runInstaller "boots" OUI, which includes running a JRE from tmp. This JRE (build 02) is broken, but you can setup to run another one via oraparam.ini and JRE_LOCATION. Download build 10 from Sun (google "jre 1.3.1 download").

How to use clamav anti-virus for Red Hat linux

I wanted to know how to use clamAV anti-virus solution for RHEL 5.X. I tried to find it online but the information does not seem consolidated. I wanted to understand how to install and use it to scan the system.
Requesting a reply to my query.
Regards

Moderator Action:
This question has no relationship whatsoever with functionality involving anything "Oracle".
You should ask your Red Hat Linux questions at a Red Hat support forum.
Thread is now locked because it is outside the scope of this forum discussion space.

OSP support for Red Hat Linux Advanced Server 5.0

Wondering, if anybody tried to install Red Hat Linux Advanced Server 5.0 with N1 SPS OSP? Does it work as with Red Hat Linux Advanced Server 4.0?
Thorleif Wiik

The current official GA date for SPS 6.0 is Aug 20. There is a follow-on release for plug-ins and the MS/CLI on Windows. This is currently scheduled for some time in September.

Download oracle 11g/10g for red hat linux

hi,
I have installed VM WARE on my laptop now want to download linux ISO and Oracle ISO.
could you please tell me whcih linux version i have to install which support oracle for linux.
from where i get that
-linux installation files
-oracle installation files
both the above will install on oracle vm ware
thanks
Edited by: hard_stone on Sep 30, 2009 11:33 PM

hard_stone wrote:
hi,
I have installed VM WARE on my laptop now want to download linux ISO and Oracle ISO. Red Hat, Centos and Oracle Enterprise Linux are almost identical. The major differences are:
- Red Hat and Oracle Enterprise Linux are officially supported by Oracle to be used under Oracle products;
- CentOS is NOT officially supported
- the newer Oracle Enterprise Linux (OEL) includes an 'oracle-validate' rpm to reduce configuration guessing
Each Distro has it's purpose. I use SUSE and OpenSUSE for my office. And for general servers I use RedHat (when I need commercial support) and CentOS. I fully support CentOS and the CentOS community effort.
However, for the past year I have ONLY used Oracle Enteprise Linux under Oracle product. It is free, it is officially supported, if I need commercial support I can get it, and it has the Oracle Validated RPM to minimize my config effort. http://edelivery.oracle.com
So, as compared to the other respondent - I encourage using OEL and NOT CentOS.

Oracle 8i Internet for Red Hat Linux

Hi all,
Can any one help me on this. I have setting up Red Hat Linux 6.2 and JRE 1.1.6v5-glibc also installed on /usr/local/jre directory. But when I try to run "runInstaller" from the oracle cdrom. I have the following error:
Initializing Java Virtual Machine from /usr/local/jre/bin/jre Please wait ...
Error in Create OUIProcess(): -1
:Bad address
Any one can tell me what is the problem.
Thank you

Let me try again. I was to fast with the enter key. There is a known bug with the installer. The work around is to use the runInstall.sh that is in the subdirectory /install/linux. If you have your environment variables setup correctly this should work, also you need a minimum of 128 meg of ram on the machine.
Hope this helps.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by hhtham ():
Hi all,
Can any one help me on this. I have setting up Red Hat Linux 6.2 and JRE 1.1.6v5-glibc also installed on /usr/local/jre directory. But when I try to run "runInstaller" from the oracle cdrom. I have the following error:
Initializing Java Virtual Machine from /usr/local/jre/bin/jre Please wait ...
Error in Create OUIProcess(): -1
:Bad address
Any one can tell me what is the problem.
Thank you<HR></BLOCKQUOTE>
null

Need a installer for red hat

I am on red hat linux 9 and i know that its not supported but i need an installer... can anybody tell me which installer do i need to install weblogic platform 8.1 SP3 on red hat 9
do i need a generic installer ( if yes where can i find one)
or will the platform 813_linux32.bin will work. also where can i find the jar file as i have installed previously with jar .,.. and i dont know if bin will work or not.

well i just installed the file that i wrote an it works fine i guess.. it installed perfectly and the medrec application from quickstart works fine

How to run Weblogic Server 8.1 in Win 98/Red Hat Linux

I've receieved the Weblogic Server 8.1 Evaluation version. I've installed it successfully. But while I try to start the Weblogic Server the progress bar shows the completion of the server start but the indicator does not turn green. What might be the reason.Same is the problem with Red hat Linux 8.0 ? Please send in the solution

Joydeep,
WebLogic Platform 8.1 is not supported on Win 98 and Red Hat 8.0. Please
refer to the following url for more information.
http://e-docs.bea.com/platform/docs81/support/supp_plat.html#1048419
Regards,
Raj Alagumalai
WebLogic Workshop Support
"Joydeep Paul" <[email protected]> wrote in message
news:3f4e9723$[email protected]..
I've receieved the Weblogic Server 8.1 Evaluation version. I've installedit successfully. But while I try to start the Weblogic Server the progress
bar shows the completion of the server start but the indicator does not turn
green. What might be the reason.Same is the problem with Red hat Linux 8.0 ?
Please send in the solution

Flash Media Server for Red Hat EL 6

I have tried installinf FMS 4.0.2 on RHEL/CentOS 6 with no luck.
The installer complains about missing libcap. When I supress the check the installer warns about installation on an unsupported O/S.
Unfortunately, I can't it to work on CentOS 5. The log says:
2011-07-17      00:39:40        23795   (i)2571011      Server starting...      -
2011-07-17      00:39:40        23795   (i)2581224      Edge (23818) started, arguments : -edgeports ":1935" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1".        -
2011-07-17      00:39:40        23795   (i)2571111      Server started (/opt/adobe/fms/conf/Server.xml).        -
2011-07-17      00:39:45        23795   (i)2581226      Edge (23818) is no longer active.       -
2011-07-17      00:39:45        23795   (w)2581255      Edge (23818) _defaultRoot__edge1 experienced 1 failure[s]!      -
Followed by many more edge failures.
Meanwhile the CentOS 5 installation works fine.
Does anyone have any idea what the problem could be or whether there is a workaround?
Thanks!

Thanks again to "r.circa" who came up with the original solution. Here are some updated instructions that don't require creating a symbolic link to fix the libcap issue.
I was able to get 4.5.4 working on RHEL 6.3. Here's what to do:
Update to latest errata with 'yum update'; reboot
Also make sure you have latest version of both libcap and compat-libcap1 packages (via yum update...)
Exract the latest FMS install archive (4.5.4 as of this writing).
In that folder, for a successful, error-free install you need to edit three files:
server
adminserver
installFMS
For 'server' and 'adminserver', edit these sections as follows:
# Red Hat Linux
if [ -f /etc/redhat-release ]; then
        cd_check "Red Hat Enterprise Linux [WAE]S release 3" /etc/redhat-release redhat-RHEL3-i686
        cd_check "Red Hat Enterprise Linux [WAE]S release 4" /etc/redhat-release redhat-RHEL4-i686
        cd_check "Red Hat Enterprise Linux Server release 5" /etc/redhat-release redhat-RHEL5-i686
        cd_check "Red Hat Enterprise Linux Client release 5" /etc/redhat-release redhat-RHEL5-i686
        cd_check "CentOS release 4" /etc/redhat-release centos-4-i686
        cd_check "CentOS release 5" /etc/redhat-release centos-5-i686
        DIST='RedHat'
        PSUEDONAME=`cat /etc/redhat-release | sed s/.*$// | sed s/$//`
        REV=`cat /etc/redhat-release | sed s/.*release\ // | sed s/\ .*//`
    DIST="${DIST} ${REV} ${PSUEDONAME}"
        cd_result $DIST
..and:
# check distribution
PLATFORM="Linux"
ARCH=`uname -m`
SUPPORT=0
DISTRO=`check_distro`
case $DISTRO in
    redhat-RHEL5-i686)
    redhat-RHEL6-i686)
    centos-5-i686)
    Debian)
Similarly, for installFMS edit these sections as follows:
# Red Hat Linux
if [ -f /etc/redhat-release ]; then
cd_check "Red Hat Enterprise Linux [WAE]S release 3" /etc/redhat-release redhat-RHEL3-i686
cd_check "Red Hat Enterprise Linux [WAE]S release 4" /etc/redhat-release redhat-RHEL4-i686
cd_check "Red Hat Enterprise Linux Server release 5" /etc/redhat-release redhat-RHEL5-i686
cd_check "Red Hat Enterprise Linux Server release 6" /etc/redhat-release redhat-RHEL6-i686
cd_check "Red Hat Enterprise Linux Client release 5" /etc/redhat-release redhat-RHEL5-i686
cd_check "Red Hat Enterprise Linux Client release 6" /etc/redhat-release redhat-RHEL6-i686
cd_check "CentOS release 4" /etc/redhat-release centos-4-i686
cd_check "CentOS release 5" /etc/redhat-release centos-5-i686
DIST='RedHat'
PSUEDONAME=`cat /etc/redhat-release | sed s/.*$// | sed s/$//`
REV=`cat /etc/redhat-release | sed s/.*release\ // | sed s/\ .*//`
    DIST="${DIST} ${REV} ${PSUEDONAME}"
cd_result $DIST
and...
# check distribution
PLATFORM="Linux"
DISTRO=`check_distro`
case $DISTRO in
    redhat-RHEL5-i686)
    redhat-RHEL6-i686)
    centos-5-i686)
        Debian)
run installFMS as normal and it should just work.
I hope that helps. I also hope Adobe starts to support RHEL 6 users. Seriously, how much effort would it take?
Best,
Daniel

Red hat Linux support for Oracle

Hi! Can some body tell me which version of Red Hat Linux is supported. I was told that Oracle supports only upto Red hat 7.1 for Oracle 8.1.7.3.
thanks

I installed 9iAS on RedHat 7.3, see my post at:
Re: SQL query report columns
I don't know about versions < 7.3, but 7.3 by default includes kde 3 :)

Prime setup 2.0.0.0.294-2-K9 asks for Red Hat CD

Ok since i have this problem with a Cisco Prime
https://supportforums.cisco.com/discussion/12333166/ncs-prime-lost-licenses-after-application-restore
I decided to do a complete re-install.
Since this is a physical appliance i downloaded the PI-APL-2.0.0.0.294-2-K9 image and burnt it on a DL DVD.
Yesterday i was onsite and booted from the DVD the process starts.
Selected the re-install option with Keyboard & Monitor attached then the setup starts and we get the "Welcome to Red Hat Enterprise Linux Server" screen after a few minutes i get a pop up asking me for the Red Hat Linux CD.....
After trying this a few times i canceld it and removed the Prime from the rack todo a re-install at my company.
Here i have the same problem.
I do have an NCS-APL-1.1.1.24-1-K9 image from an earlier crash and this works fine.
But i dont really want to do the upgrade process from 1.1 --> 2.0 again since there is an image available with a clean 2.0.0.94 install.
The appliance type is PRIME-NCS-APL-K9 V02
Anyone have an idea ?

Hi Danjan,
****These patches cannot be applied via cli and can only be applied from GUI of Prime*****
Go to the link below and download the "pi_dev_pack_update_2.0-10.ubf"
http://software.cisco.com/download/release.html?mdfid=284422771&flowid=45323&softwareid=28
4272933&release=2.0.10&relind=AVAILABLE&rellifecycle=&reltype=all
After downloading the file, go to "Administration > Software Update", click upload
update file, browse to the file location that you've downloaded.
Once the file has beenuploaded, you can select the update and click install.
After installing, it shouldindicate "Pending Restart" = Yes. You will likely need to
go to the cli and do an "ncs stop" and then "ncs start".
Hope it will help
Thanks-
Afroz
[Do rate the useful post]

Guide for Tuning and Optimizing Red Hat Linux AS for Oracle9i Database

I put together a step-by-step guide for tuning and optimizing Red Hat Linux Advanced Server for Oracle9i. It's my first draft version and I would appreciate any comments and feedback.
The article
"Tuning and Optimizing Red Hat Linux Advanced Server for Oracle9i Database"
can be found at:
http://www.puschitz.com/TuningLinuxForOracle.shtml
The article
"Oracle 9i Installation on Red Hat Linux 7.1, 7.2, 7.3, 8.0, and on Red Hat Advanced Server 2.1"
can now be found at http://www.puschitz.com/InstallingOracle9i.shtml
And both links for
"Oracle on Red Hat Linux"
can be found at
http://www.puschitz.com/OracleOnLinux.shtml
Werner

Is this good for Redhat Linux 9.0 and not just the advanced server.
If it is not could you please provide me the links to articles like,
"Guide for Tuning and Optimizing Red Hat Linux for Oracle9i Database"
"Guide for Tuning and Optimizing Red Hat Linux for Oracle9i App Server"
"Guide for Tuning and Optimizing Red Hat Linux for Oracle9i Infrastucture"
Thanks.

Corruct VMWare for WebLogic Platform 8.1 SP4 for Red Hat Linux

Similar Messages

Maybe you are looking for