Corrupt Attachment after Saving in Chattermail

I have been trying to save Chattermail email attachments to an external card on my Treo 755p and then either move the card to a PC or transmit the attachment via infrared. The process works both ways except for the fact that when I try to open the attachment on the PC it states it is corrupted and fails to open it. These attachments are file formats other than that which Documents To Go supports but I wouldn't think it should matter as I'm not trying to open and read the attachment on the Treo. I would appreciate it if anyone had any insight into this problem or a workaround solution that they could post. Thanks.
Post relates to: Treo 755p (Sprint)

When you get the attachment in the email, are you downloading the entire attachment? If you do not select to download the entire attachment then the file may be corrupt because of an incomplete download of the attachment.
Usually when you download partial attachments you need to select more to download the entire attachment. I found this regarding attachments in the user guide.
If an attachment is not downloaded because it is larger than your
maximum message size, the paper clip icon does not appear, and the
attachment is not displayed at the bottom of the message screen. SelectMore to download and display any attachments.
I found this on page 124 of the user guide. The section regarding attachments starts on page 123.
Click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/treo/treo755psprint/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Similar Messages

I have created a form in InDesign, exported to a pdf, created an editable form and saved. When I open the form and make changes and save, the reopen the changes are there. If try to email this form as an attachment after editing, the attachment is alway

I have created a form in InDesign, exported to a pdf, then created an editable form and saved. When I open the form and make changes and save, then reopen the changes are there. If try to email this form as an attachment after editing, the attachment is always minus the edits. ????

Hi chuck,
If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
Can you please send the form to me at [email protected] so that I can have a look.
Regards,
Rave

After saved to computer, Adobe Reader could not open 'filename.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

After saved to computer, Adobe Reader could not open 'filename.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

What is your operating system? Reader version?
Saved from where? What is the file size of the saved document?

Illustrator files containing graphs corrupt and will not open after saving

I have created a series of graphs in illustrator and after saving when I try to reopen them, I get the following error message:
Can't open the illustration. The illustration contains an illegal operand. Offending operator: 1#INF
This happens whatever format the file is saved in.
I am using CC.
Any ideas why and how to prevent it happening in the future?

vnqaa,
If you are saving elsewhere than your own harddisk, that may be the cause. Otherwise, something else has obviously corrupted the files, possibly related to graphs.
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way.
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error -occurred-pdf2dtp-file-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-ill ustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator -files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html

Output needs to attach automatically after saving invoice

Dear Friends.
for my invoices output needs to be assigned automatically after saving invoice. as of now it not like that even though i created condition record. manually we can able to enter.
this process has to be applied for both manually and batch creation innvoices.
Please let me know your suggessions on the same soon.
Thanks
Raju.

Hi Raju,
check whether you have maintained print parameters in T code VP01 by selecting your output conditin type and also check whether the condition records are maintained correctly in VV31.
Regards
sankar

Thunderbird cannot open attachment after idle for several hours on Windows Terminal Server 2008 R2 Enterprise

We are using Thunderbird on WTS2008 R1
Cannot open attachment after thunderbird is launched for a short period of time. Tried to save attachment but the attachment saved actually comes with 0kb. Thunderbird works fine after restart itself, not sure if any settings can fix this?

Hi Darrkon,
I suggest checking the status of the HealthMailbox on each of servers.
Also try to re-create the mailbox. You can safely delete and recreate health mailboxes.
Be aware that any local Managed Availability probes that are using the these mailboxes will fail until the Microsoft Exchange Health Manager is restarted. Once that service is restarted, it will recreate any mailboxes that it needs.
More details in the following similar thread, just for your reference:
BSOD after creating DAG
http://social.technet.microsoft.com/Forums/exchange/en-US/44d1cd98-cba1-4ed0-b0e7-8aa76ee3eabc/bsod-after-creating-dag
Thanks
Mavis
Mavis Huang
TechNet Community Support

Front Panel objects do not stay in place after saving, closing, and reopening the VI.

I have been working with a couple of versions of a main VI. The original VI was given to me so that I could add additional functionalities to it. I had been designing the front panel of the latest version of the VI on a Dell laptop running Windows 7 and LabView 2011 SP1 using a monitor with a resolution of 1920x1080. My booleans, numerics, and plots on the front panel had always stayed in place after saving, closing, and reopening the VI. Once in the field, I connected my laptop to a cRIO9073 and used my laptop screen with a resolution of 1366x768 to operate the VI. I made some changes to the VI, saved it, and reopened it. This time I noticed that the front panel objects had become overlapped, resized, and generally rearranged. I tried fixing the objects but I noticed that they reverted back to the incorrect positions after saving and reopening the VI. I was successful in keeping the objects in position a couple of times, but when I would open the VI at a later time, the objects were again rearranged. This is happening on both my monitor and laptop screen. The original version of the VI, however, does not behave this way and I have opened it on both my monitor and laptop screen. In this version, the front panel objects always stay in place. Both VI's have the same window size properties. Could I have corrupted the latest version of my VI somehow? Below are screenshots of the front panels of both VI's.
Attachments:
Blender Controller Original.PNG ‏140 KB
Blender Controller.PNG ‏203 KB

Hi Miguel,
It is possible to programmatically set or change the position of front panel objects. (for example: http://digital.ni.com/public.nsf/allkb/4D0DA06B43195B3F862572F3000AF2D3?OpenDocument) However, if you haven’t intentionally done that, it seems unlikely that it is the problem.
Have you tried copying the entire block diagram in to a new VI to see if the problem persists? While it is unlikely, you are right that it is possible for VIs to become corrupted. I’ve never heard of a situation like this except in the situation where the settings Tom had you check have been changed. Here is some information about those settings:
http://digital.ni.com/public.nsf/allkb/7567EF257B9CFDF986256F630073228F?OpenDocument
Since there was no rearrangement when you copied the front panel to a new VI, you might try copying the block diagram a little bit at a time to see if there is some particular part of it that creates the problem somehow.
K. Johnson

CS5 indd files occasionally change after saving and reopening

Occasionally the contents of my InDesign document will change after saving and re-opening. No errors reported during the save however when the file is opened a text box may be out of place or leading may be messed-up on a few random pages or some of the recent changes may not have been saved. Any ideas?

There was no direct indication that you created the code in a standard module. I asked because you reported that the code works in the sample workbook that you downloaded but not in your own workbook.
I don't know what else to suggest at the moment.
Could you create a stripped-down copy of the workbook (without sensitive information) and make it available through one of the websites that let you upload and share a file, such as Windows Live SkyDrive (https://skydrive.live.com),
FileDropper (http://filedropper.com) or DropBox (http://www.dropbox.com). Then post a link to the uploaded and shared file here.
Or register at www.eileenslounge.com (it's free) and post a message in the Excel forum. You can attach files up to 250 KB to a post there (zipped if necessary).
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Email Billing document as PDF Attachment while saving from VF01/02

Hi,
Can anybody suggest if there is any BADI/User Exit/Configuration exists in order to email Billing document as a PDF attachment while saving from VF01 or VF02?
We need to trigger this while saving the Output type say, VF02 GOTO -> HEADER -> OUTPUT (select the output type) -> SAVE - should send an email with PDF attachment.
I have written the code for sending email with PDF attachment. Presently this code is included in the Print program for the sapscript and an email is sent when an output is issued from VF01/02/03 where as the requirement is to send email whenever the document is saved.
Thanks in Advance,
Srinivas

Hi,
While saving subroutine FORM_OPEN will get triggerred, and this will be included in the Z Program. If it is not contained in the Z program, include this subroutine. This subroutine will have include RVADOPFO.
The above include will have the function module ADDR_GET_NEXT_COMM_TYPE, and the import parameter LVS_COMM_VALUES will contain the address number and email address to whom the pdf needs to be sent.
So here, i.e. In place of standard include RVADOPFO, put custom include ZRVADOPFO, and modify the code as below.
After the function module ADDR_GET_NEXT_COMM_TYPE, read the email address from any custom table based on the various conditions or hard coded value, then move it to the below variable.
LVS_COMM_VALUES-ADSMTP-SMTP_ADDR.
And remaining functionality will be taken care by the standard code. i.e. converting the spool to PDF and attaching it while sending the email etc....
If I am not wrong, the same functionality will work even while saving the sales order etc..
Regards,
Santu.

The approver does not show in the approval preview after saving sh. cart

Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1.     Shopping created
2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3.     Shopping cart is saved.
4.     After saving , Check status transaction shows the shopping cart in status awaiting approval
5.     The section approval shows No workflow started , application error occurred
6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
7.     The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
Pawan

Hi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan

Can't open my file after saving.using labview 8.2.1

Hi there, after saving my program, i can't access/ or open my program again, but my subVI can be open, this puzzled me. Can anyone help me with this. i have attach the program,. it also prompt me (this resource you are attempting to open was created in a more recent version of labview and is incompatible with this version). And my Uni is using labview version 8.2.1, no other version.thanks alot
Regards:MKK
Attachments:
cyclodrive combination programme.vi ‏87 KB

I can't open it either...
You should always keep back-up....

PDF file won't open after saving it from the web. get error message file is damaged.

My PDF files won't open after saving them to Docs from the web. I get error message file is damaged. Can someone help me correct this problem on Mac Air w Mountain Lion?

I wonder if the image is being embedded somehow and there is not enough scratch disk space to render the file. Just a hunch. Check your hardrive to see how much free space is available. Also, check your RAM and see if you can upgrade ( install more, install much more ) to max out as much RAM as possible. At a minimum, check for fragmentation and do a "Correct Permissions" via Apple's Disk Utility.
But, weird things start happening when a font becomes corrupt. Not that one is, but it may be in your best interest to acquire a font management utility like Font Agent PRO ( if you don't have one already ). A good font management program can detect and disable corrupt fonts.
CS1 and OSX10.4 should be fairly compatable with the 7500, but you may have gone as far as you can go. Think about upgrading to a G4 or a G5. I believe the 7500 was pre G3 ( which I think is the minimum requirements for CS1 ).

Layers lost after saving as psd

I am having trouble with losing all my layers after saving. I have read many posts hoping to find some direction with no success. I tried rebuilding the entire project and only saving as a psd, still no success. I have made sure to check the layers box. And every time I open it on my Mac, the layers are still intact. However, my programmer and everyone else I send it to- end up with one merged background layer. Does anyone happen to know what may be the reason for this? I appreciate any help/ discussion.

I believe I have solved it. And the above mentioned was partially correct. I was sending it through email, and it was being compressed to 'medium size' rather than actual size. This was rendering the file uneditable w/in Ps. I probably should have figured this out sooner, but I guess it happens. Nevertheless, thanks for the help.
Attached is a thread to a similar problem/ solution.
https://discussions.apple.com/thread/1965557?tstart=0

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Missing files - corrupt library after upgrade to 11.1.4

I updated iTunes to 11.1.4, and after launching, it looked like it was updating my library as it's done in the past. However, this time, after an hour I realized it had not yet completed, and a dialogue box asking about creating an iTunes U playlist was on the screen. I tried to do so, but it just kept repeating. So finally I stopped it, and now I have an file marked iTunes library (damaged) and an incomplete library. I am missing thousands of songs compared to the last .itl I have in Previous iTunes Libraries.
I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library?
Thanks in advance.

I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
No, you need to do the backup as part of regular computer maintenance and before you do any software upgrades. iTunes moves the old library into the previous library area but perhaps your update failed before it did that.
How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library?
Yes, there's one on the Dougscripts web site that will crawl through a library. In yur case it's probably just as easy to drag the whole iTunes media folder to Automatically Add to iTunes. Anything already in the library it will ignore. Anything not there it will add.

Corrupt Attachment after Saving in Chattermail

Similar Messages

Maybe you are looking for