Corrupt CAB File

Hello,
I hope I have placed this in the correct forums here on TechNet. I have a corrupt CAB file and am looking on ways to correct it. We use WINRAR to open CAB files. When I attempt to open it via WINRAR I am being told "The archive is either in unknown
format or damaged." I have multiple CAB files generating this error, but not all of them.
Does Microsoft have a tool, or does anyone have any experience on the best way to repair these CAB files? These CAB files contain archived emails we are using with our Enterprise Vault system.
Thanks for any assistance!

What software creates the CAB files? (rhetorical) I'd contact their support for solutions.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

  • CS2-installing error "data1.cab" file corrupt

    I have recently reformatted my C drive and reinstalling programs.
    I tried to reinstall my CS2 Photoshop, but received error message that the "data1.cab" file was corrupt or missing. Could not install program.
    I don't know how to fix. Could someone please help?
    Thanks,
    mmspry

    from a disc? try to copy the photoshop folder from the disc to the desktop, then run setup from there. however, you might have a bad drive or a bad disc. if the setup from the desktop fails, try installing on another machine. if it still fails, the disc probably has a problem. if that works, maybe your drive needs replacing.

  • New HDD, purchased recovery material, recovery Faliure, CAB file HP_SSRD_LOG.CAB is corrupt

    Hello,
    The Hard Drive failed and I purchased a new one. Purchaed recovery (DVD) disks. Have tried twice to recover and in each occuance recieved the error recoevery Failed.
    How do I create a PIN-log
    [13:18:01.07] ------------------------------------------------------------------------------------------
    ***CTO Error condition has been dtected in [Factory Update] phase !! ***
    [13:18:01.07] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
    [13:18:01.08] ------------------------------------------------------------------------------------------
    [12:14:51.87] Start BBOffline.cmd...
    UPDrv=[C:]
    [12:14:51.87] Set UIA Error Code to 951
    [12:14:52.17] Delete [FBI] folder.
    [12:14:52.19] WinPE is 64bit.
    [12:15:16.65] Starts [FixUps].
    [12:15:16.69] ---------------------------------------------------------------------
    [12:15:16.69] FixUps.cmd...
    [12:15:35.03] FixUps.cmd completed...
    [12:15:35.05] ---------------------------------------------------------------------
    [12:15:35.05] Starts [Tweaks for SSRD].
    [12:15:35.07] ---------------------------------------------------------------------
    [12:15:35.07] SSRD Tweaks to change user default locale...
    [12:15:35.07] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
    [12:15:35.25] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US ".
    [12:15:49.73] ---------------------------------------------------------------------
    [12:15:49.74] Launch PININST.exe for Offline ...
    [12:17:10.23] Starts [Sleep 10 sec].
    [12:17:20.31] Starts [Create RStoneFUpdate.INI].
    [12:17:21.41] Starts [create 1GB Pagefile for offline].
     Volume in drive C has no label.
     Volume Serial Number is AE90-CC9C
     Directory of C:\System.sav\bbv
    01/23/2015  12:17 PM     1,073,741,824 pagefile.sys
                   1 File(s)  1,073,741,824 bytes
                   0 Dir(s)  35,020,972,032 bytes free
    [12:17:21.64] Brand detection.
    [12:17:21.86] Customize error handling for Specialize ~ BBV1.
            0 file(s) copied.
    [12:17:21.88] ---------------------------------------------------------------------
    [12:20:21.77] Check Win 8 configuration...
    [12:20:22.78] Check system ID...
    [12:20:23.82] Check OS SKU...
    [12:20:24.83] Check option code...
    [12:20:25.92] Check brand name...
    SKU_DEF_COUNTRY=[244]
    SKU_DEF_SYS_LOC=[en-US]
     Reset country in administrator...
     Reset country in Default user...
     Reset System locale
    Deployment Image Servicing and Management tool
    Version: 6.2.9200.16384
    Image Version: 6.2.9200.16384
    Reporting offline international settings.
    Default system UI language : en-US
    System locale : en-US
    Default time zone : Pacific Standard Time
    User locale for default user : en-US
    Location : United States (GEOID = 244)
    Active keyboard(s) : 0409:00000409
    Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
    Installed language(s): en-US
      Type : Fully localized language.
    The operation completed successfully.
     Updated System Locale info...
    [12:20:43.98] Start PIN Tweaks...
    [12:20:45.00] ---------------------------------------------------------------------
    [12:20:45.02] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
    [12:20:45.02] ----------------------------------------
    [12:20:45.02] Tweaks for OOBE's Unattend.xml
    [12:20:45.02]  to pick up the proper file...
    [12:20:45.02] ----------------------------------------
    [12:20:45.02] rename unattend.org to unattend.or_
    [12:20:45.06] ----------------------------------------
    [12:20:45.06] without Light Sensor..
    [12:20:45.09] ----------------------------------------
    [12:20:45.10] This is Restored image by SSRD [SSRD.flg]...
    [12:20:45.12] ---------------------------------------------------------------------
    [12:20:45.99] Start MIR Tweaks...
    [12:20:47.03] ---------------------------------------------------------------------
    [12:20:47.03] [MIR Tweaks] ...
    [12:20:47.03] ---------------------------------------------------------------------
    [12:20:48.00] Start Factory Update(s)...
    [12:21:55.10] Start QFE Offline installation...
    [13:18:00.80] PININST_OFF: PASSED...
    [13:18:00.88] Type C:\System.sav\Logs\BBFindEr.log...
    [13:18:00.89] Type C:\System.sav\Logs\BBFindE0.log...
    ---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
    Result=PASSED
    [13:18:01.05] Found some error at QFE Offline installation...
    [13:18:01.05] Check C:\System.sav\Logs\BBFind4QFE.LOG to see which QFE got the issue...
    [13:18:01.07] Check C:\System.sav\Logs\QFEOff\KBxxxxx.log.txt to see the detail...
    upon further investigation
    Extracting to "C:\Users\dwalke\AppData\Local\Temp\wz876d\"
    Use Path: yes   Overlay Files: yes
    The operation completed successfully.
    Extracting CTOERROR.flg
    The operation completed successfully.
    CAB file HP_SSRD_LOG.CAB is corrupt

    @Oregondeere 
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
    Cheers,
     KarolB
    I work for HP

  • Acrobat Standard 8 CAB File corrupted.

    I tried to install Acrobat Standard 8 but, I received a message that the cab file is corrupted. Can anymore provide the site where I can get a copy of the CAB file.
    Thanks

    If you purchased Acrobat on disk, that would be the place to look. You can call Customer Service to see if you can get a replacement disk. If you downloaded the original from the Adobe store, again Customer Service would be your only option.

  • Corrupt cabinet file - QuickTime.cab - error code 2350

    I've attempted to install itunes many times without success. Each time I get a message "cabinet file Quicktime.cab is corrupt and cannot be used. Error code 2350". The installation process then stops and reverses all changes. I've tried troubleshooting - uninstalling QuickTime, installing script files for XP, deleting temp folders, etc without success. I've even downloaded the original zip file of itunes several times without avail. Any ideas?

    I have the same problem. Everytime I try to download ITunes 7.0 I get a Cabinet File Error that says "itunes.cab' file is corrupt and cannot be used. It reads error 2350 and will not let me install the itunes setup. I have also tried to uninstall and retry but have no luck. If you have any luck please email me at [email protected] I am thinking it might be because I still have AOL dialup and maybe need to get cable or DSL. But I am not sure.

  • .cab files keep corrupting in Windows XP

    Hi all,
    I'm 3 days into trying to install CS3 onto an Xp system so, if you can help me resolve this, you're a genius in my book.  :-)   I keep getting .cab file corruption errors.  I think I've tried just about every trick I could find here in the forums (e.g., copying the disc's contents first to the hard drive, creating a new user account, using CS3 clean script and MS uninstall script, updating MS Installer, and all that jazz).
    I eventually tried installing it on a different PC (Vista) and it installed fine there.  I confirmed with 7-Zip's "Test Archive" feature on that system that the cab files on the disc were indeed fine and then copied all the setup files onto a flashdrive and brought that over to the Xp system.  Strangely, no luck...it seems the .cab files get corrupted even on the flashdrive once they are added to the Xp system.  About the only I haven't tried is updating to Xp SP3 (which I'm hesitant to do as I don't want to risk messing up my other programs that work fine with SP2, especially when I don't even know it will fix it).  I read where one guy with a home network installed it using the CD-ROM from one system to install it onto the other system that he was having the install trouble with.  He seemed to believe the problem was a combo hardware/software issue.  I'm thinking of trying this but will need to get it setup.  Do both PCs need to be running the same version of Windows?  Any other possible fixes?

    confuzeled wrote:
    Any other possible fixes?
    What Flash drives have you tried? Could well be that someting goes wrong when the files get written to them. Still, since it seems you started out with the original discs on the system, that doesn't seem to be the problem. More likely some security tool is scanning the files and damaging or Windows' own DEP has for some reason been set for cabinet files. So I'd definitely look into that. the version of Windows shouldn't matter. CS3 was developed at the high times of XP, so it primarily was made for that andjust the otehr way around, Vista compatibility is the bare minimum required.
    Mylenium

  • Error while installing jdk1.5.07 on Windows 2000.(data1.cab file missing or

    I am unable to install jdk1.5.0.07/jdk1.5.0.11and while Copying files this error is generated.
    "Data1.cab file is missing or corrupt.". I have tried to download the same from Sun's download centre as offline installation.
    Please suggest a solution.
    Regards,
    Neha Shrivastava

    I have tried downloading it again and also used the installer which was successfully able to install on Windows XP.
    Also, a few days back I was able to install jdk1.5.0.07 but then my system was attacked by some trojan and I had to format it. Since then I am unable to install it using the same exe.

  • RIDICULOUS Crystal Reports Server XI R2 SP4 - Installing - missing cab file

    Unsympathetic SAP rep Don Williams wrote in a now closed thread,
    Subject: Re: Crystal Reports Server XI R2 SP4 - Installing - missing cab file : m293.cab
    Message: Hi All,
    There is no incremental SP4 service pack for Crystal Reports Server XI R2 and no plans to build one.
    Your ONLY option is to back up your CMS and Data store, un-install and then install from the FTP link.
    The downloadable file from the support site is broken and they are working on fixing it and it is/will be the full build also.
    Closing this post now.
    Thank you for your understanding
    Don
    Frankly, this is outrageous.  This issue has been open for close to 5 months.  Rather than simply updating the SP4 incremental update with the correct files, SAP's brilliant response is to tell us that the file is STILL broken, but ***** you, whenever we fix it it will be the full build only.  Well, thanks!  That makes it so much easier.  Rather than looking at Crystal Reports 2008, maybe it's time to suck it up and look elsewhere,
    Here's hoping SAP decides to do the right thing.  I'm sure everyone on the original thread would be interested.

    Hi Falk,
       Yes, I am downloading it from a Win2003 machine. The browser is IE7.
       I can even see what's inside the m293.cab, and it is not the file mentioned on the error message...
       This is the m293.cab content (one file):
       tslv.dll.7ADA0B91_68E0_4E90_AD3D_23C9E3079BAB
       The file doesn't seem to be corrupted, it just doesnt have what was expected by the installer software.
       I tried downloading it again and had the same result... These are the installation files that I've already tried with the same result:
        - crsxir2win_sp4.exe (from [https://smpdl.sap-ag.de/~sapidp/012002523100009887052008E/crsxir2win_sp4.exe])
        - 1401492085.exe (from [https://businessobjects.subscribenet.com/control/bobj/product?cert_num=48316663&child_plneID=30801])
       The next one was not the rigth package:
         - boXIwin_sp2.zip (from [https://smpdl.sap-ag.de/~sapidb/012002523100005931922008E/boXIwin_sp2.zip])
       I uploaded the servicepack4 part of the log where the error appears:
      [ftp://ftp.businessobjects.com/pub/incoming/sp4LogPiece.txt]
    Thanks,
    Marcos

  • Bad cab file

    The cabinet file 'iTunes.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
    Tried installing/updating to iTunes 10.0.01 (or whatever the newest one is) seven times now, different browsers (Firefox, IE), nothing helps. Never had any trouble in 4 yrs prior. Nothing new on the computer since last iTunes upgrade. Any way to replace the bad .cab file?

    imaji wrote:
    I have a desktop and laptop, iTunes on both. I've always synced my iPhone thru the laptop. If I use the desktop, am I going to screw anything up? There's different music, pictures, and stuff on each computer, and I'm pretty sure I don't want all of it on my phone, but I'm not sure how to teach the phone to discriminate.
    The iPhone will sync to your iTunes library on the machine you connect it to. It is a lot easier to pick one machine and always sync with that one. If there is something on the second computer that you want, copy the items to a USB flash drive, then from the flash drive to the main computer, where you will add them to your main iTunes library.
    If you don't want (or don't have room) to sync your entire library to the device, check the option for "sync selected playlists," and choose the ones you want.

  • MBSA 2.2 Cannot load security CAB file

    Hello everyone!
    I'm trying to run MBSA 2.2 with the following command but it ends with "Cannot load security CAB file" error in Windows 7 client. Windows XP works fine:
    @ECHO OFF
    mkdir %windir%\temp\mbsa\
    copy mbsa %windir%\temp\mbsa\
    %windir%\temp\mbsa\mbsacli.exe /xmlout /wi /nvc /nd /catalog %windir%\temp\mbsa\wsusscn2.cab >>
    \\fileshare\MBSA_Reportsssssss.xml
    rmdir /s /q %windir%\temp\mbsa\
    MBSA folder includes all the needed files: mbsacli.exe, wsusscn02.cab & wusscan.dll. Remote Registry, Server, Windows Update & Workstation services are running + File and Printer Sharing service is enabled. This is a fresh Win7 install
    with the latest Windows Update Agent.
    If I run the command line without the variables (mbsacli.exe /xmlout /wi /nvc /nd /catalog wsusscn2.cab >> MBSA_Reportsssssss.xml) in the correct folder I get that same error. I've also deleted & re-downloaded/copied the cab file
    just in case if it got corrupted during the first copy.
    Are there any other requirements in Win7 to get this work locally with mbsacli.exe?
    Thanks!

    Can you explain how you fixed your user rights to get access? I keep getting access denied when I run this simple script even as a DA
    mbsacli /listfile <D:\wsus>\Servers.txt /n os+iis+sql+password

  • Corrupt Dock File?

    Hi,
    So on my dock, I have my Applications Folder on it to use as a shortcut, but just recently, it started to display two of every application. See my picture:
    I also have my Downloads Folder on my Dock. When I drag things from the Downloads folder into the trash can, nothing happens. But then when I click +Show In Finder+, it shows the file as deleted.
    So it seems my Dock is not refreshing or something? So what I did to fix it was just remove the Applications and Downloads Folders from the Dock, and drag the Applications and Downloads folder from my hard drive to the dock. But everytime I log back in or download something else, the problem will arise again.
    Do I have a corrupt dock file? I didn't want to try messing with that until I consulted +Apple Discussions+ first.
    Thanks, Alex

    if recreating those stacks doesn't help try resetting your dock preference file. delete the file /users/user/library/preferences/com.apple.dock.plist and enter the following terminal command
    killall Dock
    your dock will be rest to the default. see if the problem goes away.

  • Cannot backup iPhone 3GS to my computer after upgrading to IOS 5.0 due to "corrupt backup file"

    How do I sync my 3GS to my computer after upgrading to IOS 5.0.1 and getting message "corrupt backup file, delete and retry"?

    Some Users have reported that a Restore has Resolved Issues after the Upgrade...
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

    I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
    the error message got when it runs on another controller is "Error -32810 occurred at  The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
    I wonder by what it is caused?
    Thanks

    Hi Matthew,
    As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
    I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
    Please keep us posted on your troubleshooting steps. Have a great day!
    Amanda Howard
    Americas Services and Support Recruiting Manager
    National Instruments

  • Any way to repair corrupted pdf file?

    I created a pdf document on a my PC and it became corrupted with all these strange characters.
    Now when I open the document I get an error message that wasn't coming up before im hoping this msg will bring some light into the situation.
    If anyone can help me id be very thankful

    General Repair of Adobe Acrobat Reader corrupted .pdf file...
    1. Go to adobe official site, click the "Support" tab on the top of the screen, click on "Adobe Reader," and then select the "I can't open a PDF document" statement underneath "Troubleshooting." The Support tab is located near the top of the screen as a white word against a black backdrop. After clicking Support, you will see the phrase "Product Support Centers" on a new page in bold white font, under which is "Adobe Reader." The new page after clicking "Adobe Reader" will have the word "Troubleshooting" underneath the phrase "Adobe Reader and Help Support." Underneath "Troubleshooting" is "I can't open a PDF document."
    2. Follow the instructions on how to complete a general repair and installation of Adobe Acrobat Reader. To attempt the most basic PDF repair method, Open "Adobe Acrobat Reader" (select the program in your Start menu, which is on the bottom-left part of the screen), select "Help" from the gray tab menu at the top of Adobe Acrobat Reader, and click on "Repair Adobe Reader Installation." A meter should pop up indicating that your Adobe version is being checked for errors and is being linked back to the home Adobe official website just in case you need to download a new update of the program. If you need to download an updated version of the program, another pop-up will appear on your screen asking you if you want to update Adobe. Click "Yes."
    3. Reopen the PDF file. It should now be readable. If not, then try the next set of directions.
    4. If nothing helped, and you can't redowload .pdf file from source where it was, then use third party solution PDF On-line repair service https://onlinefilerepair.com/en/pdf-repair-online.html

  • How to install MSFT application security updates in cab file format using DISM

    Hi,
    I tried to install security updates for MS Office which are cab files like any other windows security updates cab file. It is giving an error called "file not found". But other windows security updates cab files are installing fine without any error.
    I tried to install these updates manually using DISM on commandline. It is not installing. I even tried using pkgmgr.exe, but that is not working either. I looked at DISM logs which is saying it failed opening the cab file. I tried different other commandline
    options of DISM to install this, but nothing else is suitable for a cab file install.
    Does anyone know how to install a cab file for application security updates via DISM.exe or other MSFT commandline tools?
    Thanks,
    ANSA
    DISM log:
    =======
    2015-02-25 14:42:59, Info                  DISM   PID=4916 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
    2015-02-25 14:42:59, Info                  DISM   PID=4916 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Failed to get and initialize the PE Provider.  Continuing by assuming that
    it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE:
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE:
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Executing command line: "C:\Windows\System32\Dism.exe" /online /add-package /packagepath:"C:\ProgramData\Application
    Data\Autonomic\ANSA Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" /ignorecheck /norestart
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Successfully loaded the ImageSession at "C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B"
    - CDISMManager::LoadImageSession
    2015-02-25 14:42:59, Info                  DISM   DISM Image Session: PID=11836 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\OSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\OSProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\LogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\LogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\PEProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Warning               DISM   DISM Provider Store: PID=11836 Failed to Load the provider: C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\PEProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Failed to get and initialize the PE Provider.  Continuing by assuming that
    it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Image session successfully loaded from the temporary location: C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B
    - CDISMManager::CreateImageSession
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\CbsProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\CbsProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
    2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 CBS is being initialized for online use. More information about CBS actions can
    be located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\MsiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\MsiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\IntlProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\IntlProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\DmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\DmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
    2015-02-25 14:42:59, Info                  DISM   DISM Driver Manager: PID=11836 Further logs for driver related operations can be found in the target operating
    system at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\UnattendProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\UnattendProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\SmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\SmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\TransmogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\TransmogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
    2015-02-25 14:42:59, Info                  DISM   DISM Transmog Provider: PID=11836 Current image session is [ONLINE] - CTransmogManager::GetMode
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Encountered the option "packagepath" with value "C:\ProgramData\Application
    Data\Autonomic\ANSA Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
    2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed opening package. - CDISMPackageManager::Internal_CreatePackageByPath(hr:0x80070002)
    2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed to get the underlying CBS package. - CDISMPackageManager::OpenPackageByPath(hr:0x80070002)
    2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed to open the package at location: "C:\ProgramData\Application Data\Autonomic\ANSA
    Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" - CPackageManagerCLIHandler::ProcessPackagePath(hr:0x80070002)
    2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed while processing command add-package. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070002)
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Further logs for online package and feature related operations can be found at
    %WINDIR%\logs\CBS\cbs.log - CPackageManagerCLIHandler::ExecuteCmdLine
    2015-02-25 14:42:59, Error                 DISM   DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070002
    2015-02-25 14:42:59, Info                  DISM   DISM Image Session: PID=11836 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Finalizing CBS core. - CDISMPackageManager::Finalize
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the OSServices.  Waiting to finalize it until all other providers are
    unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the PE Provider.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DISM Unattend Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the OSServices.  Waiting to finalize it until all other providers are
    unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(Edition Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Releasing the local reference to OSServices. - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: OSServices - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:43:00, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2015-02-25 14:43:00, Info                  DISM   DISM.EXE:
    2015-02-25 14:43:00, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2015-02-25 14:43:00, Info                  DISM   DISM.EXE:
    2015-02-25 14:43:00, Info                  DISM   DISM Image Session: PID=4916 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
    2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Found the OSServices.  Waiting to finalize it until all other providers are
    unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

    You need to extract and install it - Refer this link
    http://blogs.technet.com/b/askcore/archive/2011/02/15/how-to-use-dism-to-install-a-hotfix-from-within-windows.aspx
    Regards Chen V [MCTS SharePoint 2010]

Maybe you are looking for