Corrupt chunk encoding, corrupt html code
We had corrupt chunk encoding on longish webpages (HTTP 1.1, HTTPS, HTML Code >2MB) and finally found out that the load balancer F5 from BIG-IP had a problem with HTTPS encoding .. updated the thing .. problem solved.
Hope this helps.
Can you please share the solution? What did you need to update in the load balancer?
Similar Messages
-
Adding HTML code corrupts (and destroys) site
I was informed by Apple support that iWeb does not support adding HTML to your page (even though I did so in the Forms widget), and that the code corrupted my page (causing all kinds of font issues, blurry images, and wacky layout errors). They said I would have to rebuild the page from scratch (I have already spent hours building an intensive website that is now useless). I am skeptical that all these iWeb problems (font changes, wrong colors, layout chaos, blurry fonts, etc.) are caused by HTML code, so if anyone has any more info I would appreciate it. I am ready to throw iWeb in the garbage and go back to Dreamweaver MX!!! Thanks.
not totally comfortable posting links to the site (its a business site and not mine)... if you search around for iWeb problems you will find many people having the same issues... when i tried fixing my original page (after deleting the page with the problematic code) the problems still occurred... when i redid the page completely the problems stopped happening (at least for now)... I was told by the Applecare person that the code had completely infested/corrupted the entire site and that it could not be fixed... that I would have to completely recreate the site again... what doesn't make sense is that such a glaring, fundamental problem on such a basic program goes ignored by such a powerful, inventive, flourishing company... disappointing to see all the issues/bugs that get officially ignored on these forums...
-
CS4 is appending bits and pieces of HTML code to the end of my webpages without rhyme or reason.
Removing the errant code appears to work in code view. BUT AFTER SAVING THE FILE IT REAPPEARS.
I have tried deleting the start up folder in the documents and settings > Adobe > Dreamweaver and restarting the program.
In the past this worked - but not today.
Code is still being appended to the end of my pages and it can not be deleted using Dreamweaver.
Is there a hot fix or patch coming soon to address this problem?
Regards,
Gaver P
</td></tr></table></td></tr></table>
<DIV id=footer><P> © 2009 TSi - Tropic Signs Incorporated</P></DIV>
</BODY></HTML>
L> <-- added by program and unable to delete!!!Murry,
Thanks for the reply...
Unfortuanately for me, it DOES add code, as referenced in my snippet above. the "L>" was added by Dreamweaver.
I can load the page in DW.
I can delete the "L>" and save the page.
I can close the page.
I can re-open the page and...
There it is again, the "L>" is back in the page.
I can also open the same page using CF Studio.
I can delete the "L>" using Studio.
I can save the page and
When I load and view it - the "L>" is gone.
DW CS4 is corrupting the HTML of my webpages.
I know (from previous experience with Adobe Tech Support) there's a fix, but I don't recall which Registry Key needs to be deleted?
Any one know which key needs to be deleted?
Or.. .if there's a hot fix or patch for DW CS4 that will fix the problem once and for all?
G -
HTML code appears corrupted - anyone run into this problem?
Using RH8 HTML - All of my topics have unusual spacing in the html code. This happens with a brand new project - starting right from the menu to select a new project. As soon as the project is created I go into the first topic and look at the html code and it looks something like this:
OK, even though it's hard to read, you can get the jist of it. This happens with old or new projects.
I am hoping I do not have to have our IT staff perform a uninstall/install. Any feedback is greatly appreciate.
RobJust want to add that the usual trick of restoring the default font to Courier at 100% does not work as the dropdown is blank when Robert accesses it.
Also this applies to any project Robert opens, including the samples.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Using Dreamweaver to edit *partial* web page (chunks of HTML code)?
Hello,
I am using a custom PHP framework to build a website.
This framework is quite simple, it relies on 2 types of files:
Templates: site-wide PHP/HTML files including all the logic, HTML header (links to CSS & JS files), Company logo HTML menus & related navigation code, searchbox, footer etc. Only 2 templates exist: one for the homepage, another one for all the other pages.
"content files": these files contain mostly static HTML code. Content files are imported by the PHP template using PHP's include() function.
As content files are inserted within a global HTML page, these only contain chunks of HTML code: no tags such as "head" "body".
On the attached PNG, the green part is the code from the template, the red part is the code from the "content file".
A typical template file would be:
<html>
<head>
(load CSS files, JS files...)
</head>
<body>
(HTML headers & menus)
<?php include($content_file); ?> <!-- Includes partial HTML file with page content -->
(HTML footer)
</body>
</html>
A typical content file would be:
<h1>TITLE</h1>
<h2>subtitle</h2>
<p>Lorem ipsum<img src="" class="myimg" /></p>
<h2>subitle</h2>
<p>Lorem ipsum</p>
Templates are NOT editable by users.
Content files are editable by users, using Dreamweaver.
The problem is, users cannot edit those content files since it is not a valid HTML page. The CSS required to enforce the styles are not loaded since HTML headers are not present. It looks ugly and Dreamweaver tries to insert standard HTML tags such as <html>, <body> and so on.
I see 2 hypothesis, but I cannot find an answer in the Dreamweaver documentation:
have DW edit the content files alone, in which cas we would need to tell DW that it is editing a partial web page and not a full one
have DW edit the content file while applying the PHP template, in which case we would need to tell DW that is should discard most of the code and save only the "content file"
Hypothesis 1: Standalone edit of content files. Is there a way to tell Dreamweaver
that it is editing a partial HTML file,
that it needs to load additional CSS stylesheet to display the styles
that it should not insert standard HTML body and headers tags, that we know the page is not standard compliant as-is
that creating additional style is forbidden, it is only allowed to use styles defined in the stylsheet
Hypothesis 2: Edit of content files within the template. is there a way to tell Dreamweaver
that it is should add HTML code from the template before and after the loaded "content file"
that when saving the "content file" it should discard all HTML/PHP code from the template, saving only the content itself
that creating additional style is forbidden, it is only allowed to use styles defined in the stylsheet
I cannot believe noone has been faced with this problem before, the fact is I cannot find any answer about this issue.
Best Regards,
MI have moved this thread to the Dreamweaver Application Development forum, which deals with PHP and similar issues.
Several things spring to mind.
Do your template files have a standard .html file name extension? If so, you could add .html to the file types that Dreamweaver does not automatically rewrite. Select Code Rewriting in the Preferences panel, and add .html to the list of files in "Never rewrite code".
If your template files use a file name extension not recognized by DW, add them to the list using the instructions in http://go.adobe.com/kb/ts_tn_16410_en-us. You might also need to add them to the list of files that DW doesn't rewrite.
To get access to styles in pages that are composed of fragments, use Design Time Style Sheets. See http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WScbb6b82af5544594822510a94ae8d65-7e17a .html. -
Jdev11g could not extract the archive since it is corrupted error code = 50
Dears,
Please I need a help
After I downloaded Jdeveloper 11g and I begun to run the EXE it gaved me this error
"could not extract the archive since it is corrupted error code = 50"
I downloaded it again the next day but with the same error and the same problem.
Could anybody know this issue ???? how to fix it ???
Thanks in advance ....
Samy OmarDo you run a virus checker or some program to scan the web traffic?
Some of them are trying to check every file inside the jars or exe and if they contain more then 65536 file they corrupt the file without saying so.
So try to download if running such programs or try it at an other location.
Timo -
How this piece of html code is encoded from commandLink?Help!
Hi, this is the jsf code:
<h:panelGrid columns="1">
<h:dataTable value="#{temp.nameFile}" var="myL"
rendered="#{temp.show1}">
<h:column>
<h:commandLink actionListener="#{temp.create}" value="#{myL.name}"
immediate="true">
<f:param name="name" value="#{myL.name}" />
<f:param name="path" value="#{myL.path}" />
</h:commandLink>
</h:column>
</h:dataTable>
</h:panelGrid>And this is the html code it generates:
<table>
<tbody>
<tr>
<td>
<table>
<tbody>
<tr>
<td><a href="#"
onclick="document.forms['_id0']['_id0:_idcl'].value='_id0:_id2:0:_id4';
document.forms['_id0']['name'].value='ISO-3166';
document.forms['_id0']['path'].value='D:/Tomcat5.0/webapps/test/WEB-INF/iso3166.xml';
document.forms['_id0'].submit(); return false;">ISO-3166</a></td>
</tr>
<tr>
<td><a href="#"
onclick="document.forms['_id0']['_id0:_idcl'].value='_id0:_id2:1:_id4';
document.forms['_id0']['name'].value='NAICS';
document.forms['_id0']['path'].value='D:/Tomcat5.0/webapps/test/WEB-INF/naics.xml';
document.forms['_id0'].submit(); return false;">NAICS</a></td>
</tr>
<tr>
<td><a href="#"
onclick="document.forms['_id0']['_id0:_idcl'].value='_id0:_id2:2:_id4';
document.forms['_id0']['name'].value='UNSPSC';
document.forms['_id0']['path'].value='D:/Tomcat5.0/webapps/test/WEB-INF/unspsc.xml';
document.forms['_id0'].submit(); return false;">UNSPSC</a></td>
</tr>
</tbody>
</table>
</td>
</tr>
</tbody>
</table>there is a line of html code like this:
document.forms['_id0']['_id0:_idcl'].value='_id0:_id2:1:_id4';I know that "_id0" is the form ID, and "_id0:_idcl" is the clientID,but what is the value part "_id0:_id2:1:_id4" and what is the meaning of each part?I am writing my custom renderer, so i need to know how it is encoded,please help:)
Best Regards:)
Robin_id0 - id of the form
_id2 - id of the datatable
1 - row index
_id4 - id of the commandlink -
I have a topic that was once stable
, but now at one point in the top
ic the style is correct. But in another area, the style will not take and the HTM
L code inserts <span> etc., etc. Here is an example if you look at the H
2 head:
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="template" content="NERC.htt" />
<meta name="generator" content="Adobe RoboHelp 8" />
<title>Revoking PI User Access</title>
<link rel="StyleSheet" href="..\default.css" type="text/css" />
</head>
<body>
<?rh-script_start ?><script src="../ehlpdhtm.js" type="text/javascript"
language="JavaScript1.2"></script><?rh-script_end ?>
<?rh-placeholder type="header" ?>
<h1>Revoking PI User Access</h1>
<p>Access for both a PI user and a SCADAView user can be revoked if a Mantis
ticket requesting removal from IT AccessRequest exists. For Mantis tickets,
make sure that a <span class="BoldName">Real Time Systems User ID Add-Changed-Remove</span>
form completed by the user’s E4 manager is attached to the ticket. If
not, contact the requestor.</p>
<p>In order to remove access, you must search for the user name in both
the old and new databases:</p>
<ul type="disc">
<li class="BulletedList">For instructions on revoking a user's access
in the old database, <a href="#Removing_Access_Old_DB">click here</a>.</li>
<li class="BulletedList">For instructions on revoking a user's access
in the new Active Directory database, <a href="#Removing_Access_New_DB">click
here</a>.</li>
</ul>
<p>After revoking a PI user's access, you also need to remove the user's
name from the Outlook Address Book. For instructions, <a href="#Removing_User_Outlook_Group">click
here.</a></p>
<h2>Removing a user's access in the old database<a name="Removing_Access_Old_DB"></a></h2>
<ol>
<li class="NumberedList"><p style="margin-left: 0px;">Go to the SCADA
website at <a href="http://scada/" style="font-size: 10pt;">HTTP://SCADA</a>.</p></li>
<li class="NumberedList"><p>When the <span class="BoldName">SCADA &
Distribution Automation</span> home page displays, under <span class="BoldName">PI
Historian</span>, click <span class="BoldName">User Maintenance</span>
(circled in red). <a class="dropspot" href="javascript:TextPopup(this)"
id="a5">Click to view</a>.</p>
<div class="droptext" id="POPUP134020538" style="display: none;">
<p><img src="../PI_Historian.jpg" alt="" style="border-left-style: Solid;
border-left-width: 2px; border-right-style: Solid; border-right-width: 2px;
border-top-style: Solid; border-top-width: 2px; border-bottom-style: Solid;
border-bottom-width: 2px;" width="194" height="109" border="2" /></p>
</div></li>
<li class="NumberedList"><p>When the SCADA System Logon screen displays,
perform the following:</p></li>
</ol>
<ol start="1">
<li class="NumberedList2"><p>For <span class="BoldName">User Id,</span>
enter your PI user id.</p></li>
<li class="NumberedList2"><p>For <span class="BoldName">Password,</span>enter
your PI password.</p></li>
<li class="NumberedList2"><p>For <span class="BoldName">Select Group,
</span>click <span class="BoldName">PRG</span> from the dropdown list.</p></li>
<li class="NumberedList2"><p>Click <img src="../ButtonSubmit.JPG" alt=""
style="border: none;" width="61"
height="25" border="0" /><span
class="BoldName">.</span></p></li>
</ol>
<p style="text-indent: 84px;"><span class="BoldName"> Result:</span><span
class="Result"> The </span><span class="BoldName">User Administration</span><span
class="Result"> screen displays the user's information. <a class="dropspot"
href="javascript:TextPopup(this)" id="a2">Click to view</a>.</span></p>
<div class="droptext" id="POPUP133400192" style="display: none;">
<p><img src="../UAdminKUSBJX.jpg" alt="" style="border: none;" width="456"
height="368" border="0" /></p>
</div>
<ol start="4" type="1">
<li class="NumberedList"><span class="Result">I</span>f the user id
is recognized, but PI access must be removed while keeping <span class="BoldName"
style="font-weight: normal;">SCADAView.</span></li>
<li class="NumberedList">If the user id is recognized, but PI access
must be removed while keeping <span class="BoldName" style="font-weight: normal;">SCADAView
access, uncheck the </span><span class="BoldName">PI Access</span><span
class="BoldName" style="font-weight: normal;"> checkbox and click
</span><img src="../ButtonModify.JPG" alt="" style="border: none;"
width="63" height="25" border="0" />. </li>
</ol>
<p style="margin-left: 60px;"><span class="BoldName"> Result:  </span>If
the PI-only access removal is successful you should see this message (circled
in red).</p>
<ul type="disc">
<ol start="6" type="1">
<li class="NumberedList"><p> </p></li>
<li class="NumberedList">If both SCADAView and PI Access must be
removed, click <img src="../ButtonDelete.JPG" alt="" style="border: none;"
width="63" height="24" border="0" />.</li>
<p> Result: If both SCADAView and PI access removal is successful
you should see the following message (circled in red). <a class="dropspot"
href="javascript:TextPopup(this)" id="a4">Click to view.</a></p>
<div class="droptext" id="POPUP133037650" style="display: none;">
<p><img src="../UAdminDeleted.jpg" alt="" style="border: none;"
width="466" height="409" border="0" /></p>
</div>
<p class="Note" style="margin-left: 108px; text-indent: -48px;"> NOTE:
 <span style="font-weight: normal;">The User ID is the person’s
LAN user id. This removes the user id from the GLOBE_USER table.</span></p>
<h2><span style="font-weight: normal;">Removing a user's access
in the new database (Windows Active Directory)<a name="Removing_Access_New_DB"></a></span></h2>
<ol type="1">
<li class="NumberedList"><p><span style="font-weight: normal;">Remote
desktop to either server: <span style="font-weight: bold;">cccs-pifig01</span>
or <span style="font-weight: bold;">lc3s-pifig01</span>.</span></p></li>
<li class="NumberedList"><p><span style="font-weight: normal;">Double-click
the <span style="font-weight: bold;">Energy PI Users Group.</span></span></p></li>
<li class="NumberedList"><p><span style="font-weight: normal;">When
the<span style="font-weight: bold;"> Energy PI Users Properties
</span>dialog<span style="font-weight: bold;"> </span>displays,
select the <span style="font-weight: bold;">Members</span>
tab. See below.</span></p></li>
</ol>
<p style="margin-left: 48px;"><span style="font-weight: normal;"><img
src="../Remove_NewDB.jpg" alt="" style="border: none;" width="963"
height="642" border="0" /></span></p>
<ol start="4" type="1">
<li class="NumberedList"><p><span style="font-weight: normal;">Select
the LAN user name on the screen and click <img src="../ButtonRemove.jpg"
alt="" style="border: none;"
width="75"
height="24"
border="0" />.
</span></p></li>
</ol>
<p style="text-indent: 60px;"><span style="font-weight: normal;"><span
style="font-weight: bold;"> Result:</span> The user is removed
from the PI access Active Directory user database.</span></p>
<h2><span style="font-weight: normal;">Removing a user's name from
Outlook<a name="Removing_User_Outlook_Group"></a> </span></h2>
<p><span style="font-weight: normal;"><span class="BoldName" style="font-weight: normal;">This
procedure involves removing the newly deleted user from the </span><span
class="BoldName">T&D PI Users</span><span class="BoldName"
style="font-weight: normal;">
group in the Outlook Address Book.</span></span></p>
<ol start="1" type="1">
<li class="NumberedList"><p><span><span class="BoldName" style="font-weight: normal;">Open
the address book in Outlook.</span></span></p></li>
<li class="NumberedList"><p><span style="font-weight: normal;">Locate
and delete the user’s name from the <span class="BoldName">T&D
PI Users group.</span></span></p></li>
<li class="NumberedList"><p><span style="font-weight: normal;">Complete
the Mantis ticket.</span></p></li>
<li class="NumberedList"><p><span style="font-weight: normal;">If
the user is on the Terminated Employees list, enter the employee’s
user id in the PI Access column and highlight the entire row
with an orange background color.</span></p></li>
</ol>
<p> </p>
<?rh-placeholder type="footer" ?>
</ol>
</ul>
<?rh-placeholder type="footer" ?>
<?rh-script_start ?><script type="text/javascript" language="JavaScript1.2">//<![CDATA[
if( typeof( TextPopupInit ) != 'function' ) TextPopupInit = new Function();
TextPopupInit('a5', 'POPUP134020538');
TextPopupInit('a2', 'POPUP133400192');
TextPopupInit('a4', 'POPUP133037650');
//]]></script><?rh-script_end ?>
</body>
</html>
I am exhausted from deleting specific HTML code to make the content work. Plus there seems to be an issue with the margins moving around. Can someone help me with this HTLM code nightmare? Other than deleting it all and inputting the text again? This is the only topic in my project in which this has occurred.Hi Gloria,
Its not possible to talk about a solution until you know the issue which caused it. the question is the HTML cannot get reorganize in RoboHelp if it is not edited exclusively - by this I mean if you bring in all the content through RoboHelp UI then RoboHelp will not change HTML by itself, until you manually change the html code.
you should try to find out the cause of the seizure (by which I think you mean hang), It could be that you are using any version control and it failed to checkout/checkin one or more project files, It might be that .cpd file got corrupted in that case you can try deleting the .cpd file after closing the project and it will get recreated by RoboHelp on next Open project, or it is possible that some of your shared resources might be missing/moved because of which RoboHelp hangs then in such case you should replace/remove these resources.
You should not be working on the project over network (i.e. the Project should be on the local drive).
Are you using CBTs and UDVs or your topics are too large (and thus processing of these topics seizes RoboHelp)
by any means deleting random HTML code of any topic might actually make the HTML invalid and cause more crashes or hangs.
I have listed down almost all the reason..
one way is to remove topics and find out the culprit topics which causes the hang and if you find one you can share it with me at [email protected] and I might find the cause of RH hang by inspecting that
Hope this helps
Ashish -
BB sent email msgs show as HTML code with Entourage?
All my emails sent from my BB BOLD appear to what I think is HTML code in my "sent" folder in Entourage. When viewing the sent folder on my HP laptop using Outlook the sent msgs appear normal. Anyone have any suggestions for a remedy. So far, APL CARE and Microsoft tech support have no suggestions for a fix. Below my mane is a sample of what a sent msg from my blackberry looks like in Entourage. I deleted some info for privacy purposes.
Stats:
Bold 9000 OS 4.6.0.297
Mac OS 10.6.2 (IMAC 27")
Office 2008 Business Edition
Exchange email but not setup through an enterprise server
1 very frustrated customer!
Jason
X-MimeOLE: Produced By Microsoft Exchange V6.5
Received: from 67.223.78.109 ([67.223.78.109]) by dspsrv1.DSPCLINICAL.local ([192.168.30.10]) with Microsoft Exchange Server HTTP-DAV ; Wed, 3 Feb 2010 16:12:55 +0000
MIME-Version: 1.0
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
X-rim-org-msg-ref-id: 1494303592
Content-class: urn:content-classes:message
Subject: Fw: jungreis edc
Date: Wed, 3 Feb 2010 11:15:34 -0500
Message-ID: <1494303592-1265213724-cardhudecombobulatorblackberry.rim.net-311610119-@bda066.bisx.prod.on.blackberry>
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
Thread-Topic: jungreis edc
Thread-Index: Acqk677TN29/DgTOTZOarV/XXQzg==
From: "Jason
To: "Jacob
Reply-To: "Jason
<html xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:st1=3D"urn:schemas-microsoft-com:office:smarttags" =
xmlns=3D"http://www.w3.org/TR/REC-html40">
<head>
<meta name=3DGenerator content=3D"Microsoft Word 11 (filtered medium)">
<o:SmartTagType =
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"
name=3D"Street"/>
<o:SmartTagType =
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"
name=3D"address"/>
<o:SmartTagType =
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"
name=3D"City"/>
<o:SmartTagType =
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"
name=3D"place"/>
<!--[if !mso]>
<style>
st1\:*{behavior:url(#default#ieooui) }
</style>
<![endif]-->
<style>
<!--
/* Font Definitions */
@font-face
{font-family:"Rage Italic";
panose-1:3 7 5 2 4 5 7 7 3 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:Arial;
color:windowtext;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.25in 1.0in 1.25in;}
div.Section1
{page:Section1;}
-->
</style>
</head>
<span =
style=3D'font-size:10.0pt;
font-family:Arial'>Hi Jason,
<span =
style=3D'font-size:10.0pt;
font-family:Arial'>
<span =
style=3D'font-size:10.0pt;
font-family:Arial'>I just wanted to let you know a lot of my patients =
are
frozen again in EDC. Maybe they should be, I don’t know, I =
just wanted
to let you know.
<span =
style=3D'font-size:10.0pt;
font-family:Arial'>
<span =
style=3D'font-size:
12.0pt'>Regards,
<font size=3D6 color=3Dblue face=3D"Rage =
Italic">Joan =
Cutillo, <span =
style=3D'font-size:18.0pt;font-family:
"Rage Italic";color:blue'>LPN, CCRC
<span =
style=3D'font-size:
12.0pt'>Joan Cutillo, LPN, CCRC
<span =
style=3D'font-size:
12.0pt'>Clinical Research Manager
<span =
style=3D'font-size:
12.0pt'>National Pain Research Institute, =
LLC
<st1:address =
w:st=3D"on">1201 S. =
Orlando Ave.
<font =
size=3D3
face=3D"Times New Roman">Winter =
Park,
Fl, 32789
<span =
style=3D'font-size:10.0pt;
font-family:Arial'>(407) 622-5766 x1420
<span =
style=3D'font-size:10.0pt;
font-family:Arial'>Fax 1-561-515-8869
<span =
style=3D'font-size:10.0pt;
font-family:Arial'><a =
href=3D"mailto:
<span =
style=3D'font-size:
12.0pt'>
<!--[object_id=3D#natpain.com#]--><FONT =
color=3D#0000ff>
<SPAN =
style=3D"FONT-STYLE: italic; FONT-SIZE: 12pt">
<SPAN style=3D"COLOR: =
black; FONT-SIZE: 10pt; mso-fareast-font-family: 'Times New =
Roman'">NOTICE: This e-mail (including attachments) =
is covered by the Electronic Communications Privacy Act, 18 U.S.C. =
2510-2521, is confidential and may be legally privileged. If you are not =
the intended recipient, you are hereby notified that any retention, =
dissemination, distribution or copying of this communication is strictly =
prohibited. Please reply to the sender that you have received the =
message in error, and then delete it.<SPAN =
style=3D"FONT-FAMILY: 'Times New Roman','serif'; FONT-SIZE: 12pt; =
mso-fareast-font-family: 'Times New Roman'"><?xml:namespace prefix =3D o =
ns =3D "urn:schemas-microsoft-com:office:office" =
/></body>
</html>I would suggest you consult your BB documentation and/or their tech support and see if there's a way to send email as plain text rather than HTML. That would avoid the problem regardless of the email client being used to read the messages.
Alternatively, you could try using Apple Mail (included with Mac OS X) instead of Entourage and see if Mail has better luck rendering the HTML messages your BB is sending. -
How to use html codes in epub files?
In Ipad ibook application can i use html codes in that books..
Most of the html codes are working except the text box. any one can help me to fix this ?application-param tag in weblogic-application.xml may be used to define parameters:
webapp.encoding.default
webapp.encoding.usevmdefault
webapp.getrealpath.accept_context_path
http://e-docs.bea.com/wls/docs81/programming/app_xml.html#1034632
"Harshad Nanal" <[email protected]> wrote:
>
When we build an ear file , Weblogic-application.xml provides application-param
tag?
are they similar to env-entry in ejb-jar.xml.
Can I use application-param tag to define a configurable params
say myName and value as "Harshad"
How do i read it in the application say a simple java class that is included
in
a jar inside the ear file. -
Right its like this....
I can now get my data from my database (no small victory in itself. Thanx to all those that gave assistance). One of the fields contains HTML code
<p>blah blah etcWhen the jsp displays the output it is actually showing the HTML code, not the rendered output... viewing source shows that it has been written to the response as
& lt;p & gt;blah blah blah.....(needed the spaces to show it correctly!)
Any clues as to why and what I can do to about it?
Thanks
Elijado a replaceAll.., if you are using Java 1.4
String str = orig.replaceAll("& lt;", "<").replaceAll("& gt;", ">");
You might need escapes for some of those chars for the regex parser. Or this older code I had laying around:
* Decodes any entities in the specified string with their character
* equivalents.
* @param str the encoded string
* @return the decoded string
private String decodeEntities(String str) {
if(str == null) {
return null;
StringBuffer sb = new StringBuffer(str);
String[] ents = { // list of entities to replace
"&", "<", ">", "'", """
String[] chars = { // list of characters to replace with
"&", "<", ">", "\'", "\""
int len = Math.min(chars.length, ents.length);
int k = 0;
for(int i = 0; i < len; i++) {
for(int j = 0; j < sb.length(); j++) {
k = j + ents.length();
if(k >= sb.length()) {
break;
if(sb.substring(j, k).equals(ents[i])) {
sb.replace(j, k, chars[i]);
return sb.toString(); -
How to see html code in a php file using CS5.5 without using testing server?
In CS5.5 when I open a page with php extention, DW does not show any html code in design view without me having to set up a testing server. In DW 8 it would open the same files and show me the html in design view. I have no need to test php code, I just need to alter the html. Is there a setting I can change to enable this in CS5.5? Thanks.
Below is the code. I discovered that if I create a new php document not from
a template, then I can see the html elements in design view. If I create a
new page from a template and save it as html, design view still works, but
if I save a new page from template and save it as php, I only see symbols
for php and nothing else in design view.
Thanks for your help on this.
<!--
body
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to
zero padding and margin on lists. For consistency, you can either specify
the amounts you want here, or on the list items (LI, DT, DD) they contain.
Remember that what you do here will cascade to the .nav list unless you
write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where
margins can escape from their containing div. The remaining bottom margin
will hold it away from any elements that follow. */
padding-right: 15px;
padding-left: 15px; /* adding the padding to the sides of the elements
within the divs, instead of the divs themselves, gets rid of any box model
math. A nested div with side padding can also be used as an alternate
method. */
a img { /* this selector removes the default blue border displayed in some
browsers around an image when it is surrounded by a link */
border: none;
/* ~~ Styling for your site's links must remain in this order - including
the group of selectors that create the hover effect. ~~ */
a:link
a:visited
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard
navigator the same hover experience as the person using a mouse. */
text-decoration: none;
/* ~~ This fixed width container surrounds all other divs ~~ */
.container
/* ~~ The header is not given a width. It will extend the full width of your
layout. It contains an image placeholder that should be replaced with your
own linked logo. ~~ */
.header
/* ~~ These are the columns for the layout. ~~
1) Padding is only placed on the top and/or bottom of the divs. The elements
within these divs have padding on their sides. This saves you from any "box
model math". Keep in mind, if you add any side padding or border to the div
itself, it will be added to the width you define to create the *total*
width. You may also choose to remove the padding on the element in the div
and place a second div within it with no width and the padding necessary for
your design.
2) No margin has been given to the columns since they are all floated. If
you must add margin, avoid placing it on the side you're floating toward
(for example: a right margin on a div set to float right). Many times,
padding can be used instead. For divs where this rule must be broken, you
should add a "display:inline" declaration to the div's rule to tame a bug
where some versions of Internet Explorer double the margin.
3) Since classes can be used multiple times in a document (and an element
can also have multiple classes applied), the columns have been assigned
class names instead of IDs. For example, two sidebar divs could be stacked
if necessary. These can very easily be changed to IDs if that's your
preference, as long as you'll only be using them once per document.
4) If you prefer your nav on the right instead of the left, simply float
these columns the opposite direction (all right instead of all left) and
they'll render in reverse order. There's no need to move the divs around in
the HTML source.
/* sidebar1 = left */
.sidebar1
.content
.sidebar2
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol
/* ~~ The navigation list styles (can be removed if you choose to use a
premade flyout menu like Spry) ~~ */
ul.nav {
list-style: none; /* this removes the list marker */
border-top: 1px solid #666; /* this creates the top border for the
links - all others are placed using a bottom border on the LI */
margin-bottom: 15px; /* this creates the space between the navigation on
the content below */
ul.nav li {
border-bottom: 1px solid #666; /* this creates the button separation */
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that
your links retain their button look even after being visited */
padding: 5px 5px 5px 15px;
display: block; /* this gives the anchor block properties so it fills
out the whole LI that contains it so that the entire area reacts to a mouse
click. */
width: 160px; /*this width makes the entire button clickable for IE6.
If you don't need to support IE6, it can be removed. Calculate the proper
width by subtracting the padding on this link from the width of your sidebar
container. */
text-decoration: none;
background: #C6D580;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the
background and text color for both mouse and keyboard navigators */
background: #ADB96E;
color: #FFF;
/* ~~ The footer styles ~~ */
.footer
/* ~~ Miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page.
The floated element must precede the element it should be next to on the
page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page.
The floated element must precede the element it should be next to on the
page. */
float: left;
margin-right: 8px;
.clearfloat { /* this class can be placed on a
or empty div as the
final element following the last floated div (within the .container) if the
.footer is removed or taken out of the .container */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
TD.mincart {
font-size: 10px;
font-family : Verdana;
position:relative:
left: 10px;
top: -30px;
P.mincart {
font-size: 10px;
font-family : Verdana;position:relative:
left: 10px;
top: -30px;
#search
#minicartdiv
P.smaller{
text-align:center;
font-size: 12px;
position: relative;
top: 1px;
#tagline {
font-weight: bold;
color: #03F;
height: 18px;
width: 350px;
font-size: 18px;
position: relative;
left: 10px;
padding-bottom: 10px;
#contact {
font-size: 12px;
float: right;
height: 18px;
position: relative;
padding-right: 10px;
font-weight: bold;
font-family: "Courier New", Courier, monospace;
padding-top: 7px;
Call 541-424-5555 Mon-Fri 7am-4pm Pacific Time. Email:
[email protected]
Bluetooth and More! No Sales Tax!
body, this
is a test
[Home | index.php] - Store Policies - Products
- Search - Checkout
email: [email protected] Call
541-424-5555</p>
<!-- end .footer --></div>
<!-- end .container --></div>
SSL
COT("images/cot.gif", "SC2", "none");
</html -
I have created a 468x60 animated banner in Edge Animate. How do I save the animated image to my desktop? (not in html code)
Hi,
This feature is not available in Adobe Edge animate. You can not export as image from Edge animate.
Publish options available in edge describe here
Edge Animate Help | Publish your content
Regards,
Devendra -
How do i add html code to my muse site? I want pintrest to verify my site.
how do i add html code to my muse site? I want pintrest to verify my site.
Hi,
There are multiple ways in which you can add the HTML code to your site. Few methods are :-
1) Copy your HTML code, In Muse -> Select Objects-> Insert HTML . Paste your HTML code on the page. Please reer to this screenshot :- http://prntscr.com/52vprn
2) If you want to add the HTML code in the Head section of your page, Go to Page Properties-> Metadata-> HTML for <Head> . Please refer to this screenshot :- http://prntscr.com/52vpx5
Hope this helps
Regards,
Rohit Nair -
Need HTML code to call template from an existing web template
Hi all,
Can someone help me with a HTML code which can call another web template from a field of a table.
I have a web template which includes table as web item.The template when executed displays the data of query view in the form of table.One of the field in the table is Europe.Now my requirement is when i click on that field Europe,it should open up another template which is present in the system.
Please provide me with a HTML code which can do this.
Regards,
SuchitraHi all,
Can someone help me with a HTML code which can call another web template from a field of a table.
I have a web template which includes table as web item.The template when executed displays the data of query view in the form of table.One of the field in the table is Europe.Now my requirement is when i click on that field Europe,it should open up another template which is present in the system.
Please provide me with a HTML code which can do this.
Regards,
Suchitra
Maybe you are looking for
-
Not loading from flat file using SQL*Loader
Hi, I am trying to load from an excel file. first i converted excel file into csv file and save it as as dat file. in the excel file one column is salary and the data is like $100,000 while converting xls to csv the salary is changed to "$100,000 " (
-
Having problems with my Microsoft applications
I recently downloaded Adobe CS6 Design & Web Premium, that went smoothly. The problem lies within the Microsoft Office application and my own lack of timing. Here it is here :When I got my machine back the third time it had been wiped out and it was
-
Hi, I have a requirement that I have to make a field as a dropdown in webui without redefining its Get_P and Get_V method.can anyone please help me out to achieve this?
-
Compatability for Forms-5 and Report-3
Does Forms-5 and Reports-3 connect to Oracle-8i.I get a message Ora-03121 no interface driver connected function not performed when trying to connect. So please suggest
-
When installing ICloud 3.1 always the Same Message appears: You have more than 1 Outlook, it doesnt work. but i have only Outlook 2013, any idea?