Corrupt databook.dat without palm OS

Dear,
I used to have a Palm III , but when it broke down, I continued to use the agena (databook) since I find it easy to use.
My last .bak file is of 2001, so I assume then my palm device died.
However, now the database file (databook.dat) crashed. The file is 1748KB big (and my last backup is 1 year old).
In order to use my palm agenda, I have always installed the software on my new pc. It did complain ofcourse, since I did not have anymore a real device attached, but at least I could start up the pam exe and read my agenda. This worked fine for years and years... till now.
Since I do not have the palm OS running, I assume I can not use the normal procedure ( installing and running the dbfixit.prc file).
My pc does even not recognise the prc extention.
Is there another way to recover my data ? Is there a standalone program which I can run on my corrupt database file ?
Can I try to fix something by a bin editor ?
Thanks for your help,
Roger
Post relates to: Palm III

Since you do not sync your device, if the data is corrupt in the .dat file there is really no way to recover the data by renaming the .bak file. You may want to try a system restore on Windows to a day in which the data was there.
If you can recover your system to the day the data was in Palm Desktop, you can then export your data for backup purposes.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
Post relates to: Palm i705

Similar Messages

Transfer Data from Palm OS to BlackBerry 10 Smartphones - US

(I am Posting this a 2nd time because I'm not sure it went through the first time; got some kind of authenication error message.)
- 1. What is the best way to transfer my PIM Organizer Data from my Palm TX to a BlackBerry Z10?
- 2. How do I obtain the standalone BlackBerry Desktop Software, latest Build of v.6.1? or even a version later than 6.1? or should I obtain v.5.0.1? or v.4.7?
I am currently a U.S. Cellular customer and when they make the BlackBerry Z10 available, I plan to switch from my Motorola feature phone to the Z10. I currently also use a Palm TX PDA (Palm OS Garnet v.5.4.9) and use Palm Desktop Software v.4.2 ( = the CD installation version of
v.4.1.4e?) on a Windows XPmachine. I could upgrade the Palm Desktop to v.6.2.2, but I haven't because v.4.2 on Windows XP is working well for me.
The support page for Z10, Transfer from iPhone & Android to BlackBerry 10 Smartphones - US ( http://us.blackberry.com/support/transferring-to-bb10-device/personal.html ) implies that it does not support direct transfer from Palm OS to BB v10; only transfers from Androids and iPhones, as well as from other BBs, are supported. I have searched your Knowledge Base and found several articles that tell me how to migrate my PIM data from Palm OS to earlier versions of BlackBerry. I then presume that once I have my data imported into the earlier version of BB Desktop I can then later import it into the BB10 Desktop software; am I correct?
Here are the Knowledge Base articles I found:
1. Article ID:
KB03050 ( http://www.blackberry.com/btsc/KB03050 ) - How to transfer contact information from a Palm OS device to a BlackBerry smartphone
2. Article ID:
KB04346 ( http://www.blackberry.com/btsc/KB04346 ) - Field mapping list for the PIM Data Migration Wizard
3. Article ID:
KB04437 - ( http://www.blackberry.com/btsc/KB04437 ) How to use the organizer data migration wizard
4. Article ID:
KB05421 - ( http://www.blackberry.com/btsc/KB05421) What is the Switch Device Wizard?
The four articles all give slightly different advice, but
Articles # 2 & 4
imply that I can export the PIM data from Palm to BlackBerry Desktop Manager
v.5.0.1
and seem to have the most simple and clear instructions. However,
Article #3
implies that I should use BB Desktop Manager no higher than
v.4.7
, and
Article #1
implies that I can use BB Desktop Software as recent as
v.6.1
and use "Method #2", which seems very long and complicated by transferring data to
Microsoft Outlook
as an intermediary step!
So I am confused as to which method to use.
Articles #2 & 4 & BB Desktop software v.5.0.1 seem the simplest, but if I need to use the latest possible version, 6.1 with Outlook as an intermediary to get superior results, then I am willing to follow this more complicated method as described in article #1. I want to use the method that will give me the best results with the lowest error rate, even it may be the most complicated way.
... Help!
P.S.
I also use
Agendus for Windows Palm Desktop Edition v.5.42( http://www.iambic.com/agendus/winpded/):
"Agendus for Windows is an application that enhances how you view your calendar, contacts, tasks and memos. It also provides intuitive tools, such as text capturing, a free time finder, voice recording, advanced search capabilities and Internet features (weather, driving directions, address lookup). All of these things help in make scheduling extremely easy and hassle free."
It can form hypertext links between the separate databases of the Palm Desktop (calendar, contacts, tasks and memos) so you can flip back & forth between the databses without having to close one before you open the other.
There's also an
Agendus for BlackBerry version (
http://www.iambic.com/agendus/blackberry/
), but was developed pre-BB 10, and I think the code is sufficiently different between the BB and Palm versions, that I don't think it is easy to transfer data between them since the BlackBerry version synchronizes with Agendus for Windows Outlook Edition ( http://www.iambic.com/agendus/winoued/).
When I transfer my PIM data from my Palm to a BB-Z10, will I be able to keep those active hypertext links in Agendus in the transfer and still have them work?
P.P.S.
I also have
Palm Desktop by Access v.6.2.2 ( http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/solutions/article/32859_en.html )installed on a Windows 7 machine, but I find that v.4.2 w/ the Windows XP machine tends to work better. However, I am willing to use whatever combination of Palm Desktop version together with Windows OS version that will get me the best and most accurate results. Palm Desktop v.6.2.2 also has an extension called Palm Conduit Switcher Application (OutlookSwitcher.exe v.1.3.0, which is accessible through Start > Palm > PIM conduit sync > Sync with Outlook) which supposedly will change my Palm handheld to sync w/ Outlook instead of with Palm Desktop; would that accomplish the same thing as Article #1 (ID: KB03050 > Method 2 > Tasks 1,2 & 3) and maybe be easier or do it better? But it would seem that the KB03050 method would leave my Palm Desktop intact, whereas the OutlookSwitcher application could delete my Palm Desktop in a process that would convert my data permanently to Outlook; am I correct? An earlier version of OutlookSwitcher.exe also is included in Palm Desktop v.4.2.
There are so many questions and options for me, I don't know which way to go! If you and your colleagues don't know the best way either, then I will most likely follow the advice in KB03050 in conjunction w/ upgrading my Palm Desktop to 6.2.2 on my Windows XP machine, since I would have the most control over datafield mapping, and the extra work spent doing that may pay off with a smaller error rate after the transfer, which gets me back to my second question at the top of this article: How can I obtain a copy of the latest Build of BlackBerry Desktop Software v.6.1 as a stand-alone application into which I can transfer all my PIM Data first, *before* I install & syncronize the new BB10 phone? Or should I use a version later than 6.1?
Sorry for this being so long and convoluted, but after going through all the permutations and combinations, it should be obvious to you that I now need the support of someone more expert and experienced in this before I do anything else. Thanks!

Hey telemarkdoc,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Currently you can not transfer data from a Palm smartphone to a BlackBerry 10 smartphone through BlackBerry Link. Also previous versions of BlackBerry Desktop Software will not work with BlackBerry 10 smartphones.
The only way this could work is that you transfer the information from the Palm software to Microsoft Outlook and then BlackBerry Link can synchronize the contacts and calendar information to the BlackBerry Z10.
I hope this helps.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How to solve java.io.IOException: Corrupt form data: premature ending

hei evryone!
Does anyone knows how to solve this bug?
java.io.IOException: Corrupt form data: premature ending
Im using Oreilly's cos.jar MultipartRequest
here is my form :
<FORM METHOD="POST" NAME="uploadform" action="mbbfile" ENCTYPE="multipart/form-data">
<TR>
<TD>Select a File:</TD>
<TD><INPUT TYPE="FILE" NAME="srcfile" style="width:400px"/></TD>
</TR>
<TR><TD><INPUT TYPE="SUBMIT" VALUE="Send"/></TD></TR>
</FORM>
HERE IS mbbfile which is a servlet :
package mbb.servlet;
import java.io.IOException;
import java.sql.Connection;
import javax.servlet.RequestDispatcher;
import javax.servlet.ServletContext;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import com.oreilly.servlet.MultipartRequest;
import org.jconfig.Configuration;
import org.jconfig.ConfigurationManager;
public class MBBFileServlet extends HttpServlet{
     private static final Configuration conf = ConfigurationManager.getConfiguration("ConfigFile");
     public void doGet(HttpServletRequest req, HttpServletResponse res) throws ServletException, IOException
          String filePath = conf.getProperty("FilePath", "", "test");
          try{
          MultipartRequest multi = new MultipartRequest(req,filePath,5*1024*1024);
          }catch(Exception e){
               System.out.println("MBBFileServlet Exception ---> "+e.getMessage());
     public void doPost(HttpServletRequest req, HttpServletResponse res) throws ServletException, IOException
          doGet(req,res);
Sometimes it works meaning the file is uploaded in the directory without any exception, sometimes the file is uploaded but with exception on the log saying "MBBFileServlet Exception ---> Corrupt form data: Premature Ending". and sometimes the files is not uploaded at all and when i check the error is : "MBBFileServlet Exception ---> Corrupt form data: Premature Ending". Can anyone please help me on this matter. Thx!
Your response would be deeply appreciated.
br,
TAC

Hi all!
Since I've spent some days now trying to figure out what was wrong with my file upload in Struts 1.1, I would like to share my solution with the rest of you in order to spare you for the same amout of wasted time I've spent :-)
My platform is Resin 3.0.8 and Struts 1.1. My problem was that JPEG's got corrupted when arriviving at the server. After a few days searching on the net, I tried with a plain servlet and the O'Reilly package, and the app worked perfect.
Here is my servlet:
package no.yourcompany.yourapp.servlet;
import com.oreilly.servlet.multipart.MultipartParser;
import com.oreilly.servlet.multipart.Part;
import com.oreilly.servlet.multipart.FilePart;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.ServletException;
import javax.servlet.ServletContext;
import javax.servlet.RequestDispatcher;
import java.io.IOException;
import java.io.ByteArrayOutputStream;
public class ImageUpload extends HttpServlet {
private static final String PAGE_RECEIPT = "/popImageUploadReceipt.do";
private static final int MAX_FILE_SIZE_IN_BYTES = 10000000; // 10 M
* Extracts image from request and puts it into person form.
* @see HttpServlet#doPost(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
// custom beans from my project, not defined here
PersonRegistrationForm personRegistrationForm = null;
PortraitImage portraitImage = null;
ByteArrayOutputStream outputStream = null;
Part currentPart = null;
FilePart currFilePart = null;
personRegistrationForm = (PersonRegistrationForm) request.getSession().getAttribute(DsnSessionKeyConstantsIF.KEY_PERSON_FORM);
portraitImage = personRegistrationForm.getPortraitImage();
try {
MultipartParser parser = new MultipartParser(request, MAX_FILE_SIZE_IN_BYTES);
while ((currentPart = parser.readNextPart()) != null) {
if (currentPart.isFile()) {
currFilePart = (FilePart) currentPart;
outputStream = new ByteArrayOutputStream();
currFilePart.writeTo(outputStream);
// portraitImage is just a bean for encapsulating image data, not defined in this posting
portraitImage.setContentType(currFilePart.getContentType());
portraitImage.setImageAsByteArray(outputStream.toByteArray());
portraitImage.setOriginalFileName(currFilePart.getFileName());
break;
} // if (currentPart.isFile())
} // while ((currentPart = parser.readNextPart()) != null)
} catch (IOException ioe) {
// noop
// redirect to receipt page
ServletContext servletContext = this.getServletContext();
RequestDispatcher requestDispatcher = servletContext.getRequestDispatcher(PAGE_RECEIPT);
requestDispatcher.forward(request, response);
} // doPost
} // ImageUpload
AND ADD THIS TO YOUR WEB.XML
<servlet>
<servlet-name>ImageUpload</servlet-name>
<servlet-class>no.yourcompany.yourapp.servlet.ImageUpload</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>ImageUpload</servlet-name>
<url-pattern>imageUpload.do</url-pattern>
</servlet-mapping>
AND THE HTML-FORM IS HERE
<form action="/yourapp/imageUpload.do" method="post" enctype="multipart/form-data" accept="image/*">
<p>
<input type="file" name="portraitImage" />
</p>
<p>
<input type="image" src="/dsn/img/btn_last_bilde.gif" border="0">
</p>
</form>

How do I set up a .pdf form to save filled data without having to print the form?

How do I set up a .pdf form to save filled data without having to print the form? I have provided my clients a lifecycle .pdf form they can use to record data for unique client meetings. They want the ability to save their completed data whenever they use the form under a unique file name. I've told them the only way I know how to do this is to print the completed form as a .pdf document and then save it.
Is their a way to save the data to a unique file name without printing the filled form?
Is there a way to reset the form with blank fields after saving? or to add a clear fields button?
Thanks.

If you reader extend a pdf using livecycle reader extensions then you can save the filled in data - this is true if you are using Adobe reader to view the PDF's. If you open it in Acrobat then the functionality is already there.

What if i load transaction data without loading master data

Hello experts,
What are the consequences if i load transaction data without loading master data?Are there any other factors except the load performance because of SID generations etc and inconsistencies.
<b>What kind of potential inconsistencies will occur?</b>
Problem here is:
when the transaction load starts a new master data such as employee(x) would be have been created in R/3 which does not exist in BW and hence transaction load fails.
Thanks and Regards
Uma Srinivasa rao

Hi Rao,
In case you load the master data after loading the transcation data and if there is any look up at the master data in teh update rules, then you can delete and reconstruct the requests in the ODS/Cube so that the latest master data is pulled in in the data target.
Make sure you do the Apply hier/attr change before doing the delete and reconstruct.
Bye
Dinesh

I have an Iphone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with Itunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?

I have an IPhone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with ITunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?
I updated the phone before backing it up on iTunes, now the update wanted me to connect the phone with iTunes and it says the phones in recovery mode and it must be restored before its used with iTunes. I go to click restore and it says it will reset it to factory default and I'll lose all my current data. I have all my sons pictures and videos along with this notes. I can't lose all of this data! Please help!

You have to restore the iPod, no ifs, ands, or buts...
After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
If you have a good backup you can restore that and you're good to go.
If you don't have a good backup, then you end up with a "clean" iPod....

Corrupt SRUDB.dat in WIndows 8.1 - Event ID 476

Hi all,
I have an issue slight issue with a Windows 8.1 machine (non domain joined). The user was complaining that the system/applications would become unresponsive. I ran a "Chkdsk /f /r" and it came back with a few bad clusters of which some where located
in the "\Windows\System32\sru\SRUDB.dat" file.
In the Application Event Log I see an event ID 476 raised which contain the following:
svchost (1300) SRUJet: The database page read from the file "C:\WINDOWS\system32\SRU\SRUDB.dat" at offset 2195456 (0x0000000000218000) (database page 535 (0x217)) for 4096 (0x00001000) bytes failed verification because it contains no page data.
The read operation will fail with error -1019 (0xfffffc05). If this condition persists then please restore the database from a previous backup. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance
diagnosing the problem.
I'm running an "sfc /scannow", but it looks as though the actual SRUDB.dat database has become corrupt. What does this DAT file contain and is there a way to recreate?
SFC retunred:
Windows Resource Protection found corrupt files but was unable to fix some
of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
supported in offline servicing scenarios.
I can post the CBS.log file if required, but toward the end there are some interesting entries:
2014-11-30 16:04:31, Info                  CSI    000008c5 [SR] Verify complete
2014-11-30 16:04:31, Info                  CSI    000008c6 [SR] Repairing 2 components
2014-11-30 16:04:31, Info                  CSI    000008c7 [SR] Beginning Verify and Repair transaction
2014-11-30 16:04:31, Info                  CSI    000008c8 [SR] Cannot repair member file [l:32{16}]"bootmgfw.efi.mui" of Microsoft-Windows-BootEnvironment-Core-BootManager-EFI.Resources,
Version = 6.3.9600.17031, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-GB", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2014-11-30 16:04:32, Info                  CSI    000008c9 Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.17415_none_95dd5540d57f8c01\Amd64\CNBJ2530.DPB
do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" :
Found: {l:32 b:Lj30AtCo6GC4fXRo0EX1GOwFbEaWFP3FS+YNHfv0SZ4=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}
2014-11-30 16:04:32, Info                  CSI    000008ca [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.17415, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-11-30 16:04:32, Info                  CSI    000008cb [SR] Unable to repair \SystemRoot\WinSxS\amd64_microsoft-windows-b..nager-efi.resources_31bf3856ad364e35_6.3.9600.17031_en-gb_68408c0dc1958b90\\[l:32{16}]"bootmgfw.efi.mui"
2014-11-30 16:04:32, Info                  CSI    000008cc [SR] Cannot repair member file [l:32{16}]"bootmgfw.efi.mui" of Microsoft-Windows-BootEnvironment-Core-BootManager-EFI.Resources,
Version = 6.3.9600.17031, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-GB", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2014-11-30 16:04:32, Info                  CSI    000008cd [SR] This component was referenced by [l:168{84}]"Package_2145_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14.2919355-4305_neutral_GDR"
2014-11-30 16:04:32, Info                  CSI    000008ce Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.17415_none_95dd5540d57f8c01\Amd64\CNBJ2530.DPB
do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" :
Found: {l:32 b:Lj30AtCo6GC4fXRo0EX1GOwFbEaWFP3FS+YNHfv0SZ4=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}
2014-11-30 16:04:32, Info                  CSI    000008cf [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.17415, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-11-30 16:04:32, Info                  CSI    000008d0 [SR] This component was referenced by [l:166{83}]"Package_2709_for_KB3000850~31bf3856ad364e35~amd64~~6.3.1.8.3000850-6825_neutral_GDR"
2014-11-30 16:04:32, Info                  CSI    000008d1 [SR] Repair complete
2014-11-30 16:04:32, Info                  CSI    000008d2 [SR] Committing transaction
2014-11-30 16:04:32, Info                  CSI    000008d3 Creating NT transaction (seq 2), objectname [6]"(null)"
2014-11-30 16:04:32, Info                  CSI    000008d4 Created NT transaction (seq 2) result 0x00000000, handle @0xf0c
2014-11-30 16:04:32, Info                  CSI    000008d5@2014/11/30:16:04:32.816 Beginning NT transaction commit...
2014-11-30 16:04:32, Info                  CSI    000008d6@2014/11/30:16:04:32.891 CSI perf trace:
CSIPERF:TXCOMMIT;82527
2014-11-30 16:04:32, Info                  CSI    000008d7 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repaired
Following this I ran a "Dism /Online /Cleanup-Image /RestoreHealth", which seems to have repair a few packages as seen in the CBS log, therefore I can an "sfc /scannow" once more - this time SFC reported there were no integrity violations.
However, the Event ID 476 and corrupt SRUDB.dat still persists. Is there anything that anyone can suggest?
Cheers
Chris
Chris

Hi Swinter,
“WD diagnostic showed there were unrecoverable errors” “the system seems to be stable”
Since there are unrecoverable errors and it has much possibility to relate to the drive. The error will occur again if the hardware issue is not be resolved. If the issue is under tolerant , I recommend you to back up your important data to a separate media.
This is vital to avoid of losing important data due to the unexpected drive corruption. Making a full system imagine is a better choice, though the error may be included.
If you decide to replace the hard drive ,this video may be helpful.
Video: Restoring your PC after a hard drive failure
http://windows.microsoft.com/en-HK/windows7/help/videos/restoring-your-pc-after-a-hard-drive-failure#tab=system
Best regards

Wipe hard drive data without access to screen

I want to permanently wipe out all data on my hard drive. The problem is that my video card has crashed/burned down, so I don't have access to the screen. Is there a way of wiping out all data without physically removing the hard drive?

Do you have access to another Mac? If so mount your blind Mac to it in the Target Disk Mode, Transferring files between two computers using FireWire. Now you'll see the drive on the other Mac's screen and can run Disk Utility to reformat/repartition the drive.
OT

How do I transfer my data from Palm desktop to iPhone?

How do I transfer my data from Palm desktop to iPhone? I just gave up my Treo 755p in favor of an iPhone. How do I transfer my Treo data (contacts, calendars)

I believe that when you boot your computer for the first time and you are following the onscreen instructions you are prompted whether you want to transfer data from an old mac or PC. If you click 'transfer from an old mac' and follow the onscreen instructions, this may work.
If you have already skipped this step you could use iCloud to transfer data. If you make sure that everything you want to transfer is synced in iCloud, this may also work.

How do I easily transfer data from Palm Desktop to iCal and Address Book?

Hello,
How do I easily transfer data from Palm Desktop to iCal and Address Book?
I have a Palm Tungsten E handheld which just died.
Luckily, all my data is backed-up on my Palm Desktop V4.2.1.
I just bought an iPod-Touch, so I would like to easily transfer
all my data (Addressbook, Calendar, etc) from the Palm Desktop
on my Mac (OSX 10.5) to the equivalent Mac applications
(Address Book, iCal) which will then allow me to view and update
them on my iPod-Touch.
How do I easily transfer data from Palm Desktop to iCal and Address Book?
Thanks in advance for your help.
David

Hi David. The contact information is straightforward. Bring up your Address List in Palm Desktop, then select Export under file. You pick vCard as the format, and save the resulting file where ever. In Address Book, you then select Import --> vCards under file. You may need to edit things like birthdays by hand afterwards.
I am still working on the Calendar information.
- Chris

My Ipod has a lot of music on it! but my computer crashed and I lost all my info and data! Is there a way that i can access my Ipod's data without itunes

My Ipod has a lot of music on it! but my computer crashed and I lost all my info and data! Is there a way that i can access my Ipod's data without itunes

See Recover your iTunes library from your iPod or iOS device.
tt2

Deleted bridge cc. Now I need to reinstall but it shows up in my creative cloud app as up to date without the option to download. How do I access it to download and reinstall?

In an effort to correct an issue with my creative cloud, I deleted bridge cc. Now I need to reinstall but it shows up in my creative cloud app as up to date without the option to download. How do I access it to download and reinstall?

Bmullinax please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to reinstall Bridge CC.

Message Mapping Issue with data without namespace

Hi,
I have a common xsd imported which has its own target namespace into my SWC namespace. Based on this xsd I have generated a Message Interface and webservice and given the wsdl to third party system for invoking my webservice.
The problem is I have done the message mapping based on xsd which has namespace but whereas the third party system which is consuming my webservice is sending the xml data without any namespace and because of which my mapping is failing (target structure is not getting generated as expected). I have tested the mapping with namespace and without namespace from IR already. I have explained this below with example.
I cannot change the xsd as it is a common and even cannot ask the end system to change the data format they are sending as they are sending the same data to some other systems also, which are not complaining.
How to resolve this issue in XI?
Actual xml data generated from my imported xsd (with namespace)
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Root xmlns:ns0="http://employee/types">
   <ns0:EmployeeDetails>
      <ns0:EmployeeId>12</ns0:EmployeeId>
        <ns0:EmployeeName>XYZ</ns0:EmployeeName>
</ns0:EmployeeDetails>
</ns0:Root>
Actual Data coming from third party system (without namespace)
<?xml version="1.0" encoding="UTF-8"?>
<Root>
   <EmployeeDetails>
      <EmployeeId>12</EmployeeId>
        <EmployeeName>XYZ</EmployeeName>
</EmployeeDetails>
</Root>
Thanks
Amit

Just wild guess:)
I am not 100% sure but i guess XSLT mapping does not checks the incoming payload against the sender message type.Within XSLT mapping you can add/remove namespace as you would like,use this XSLT mapping before your actual message mapping in interface mapping.
I am saying this coz recently i was able to generate XSLT mapping(in altova Map Transform) without even specifying any sender or receiver Message type and it worked just fine.
Thanx
Aamir

Keep up to date without money .

How can I keep this up to date without having to have money all the time ..... Do you have to pay for the up loads of apps.

Only for apps that cost.
My current app collection for the pad and the phone stands at 412. Have only paid $1.99 for a fancy compass and $0.99 to get the ads off a Windows Terminal emulator. That's it.
Search in the free section of the App Store, or get meta-apps like AppGratis, App of the Day, App One Plus, that will alert you of apps offered for free for awhile.

Import data without opening explorer built in Import visual button

Hi
How can I Import data without opening explorer. If I add Import button visual and click on it automatically opens explorer to chose exported file. But I already know location and name of exported file so I don't want that explorer to appear.
How can I do it?
Thanks

Hi I was thinking
What about to have code for importing and exporting. for example:
Import(DataName, location)
Import(Collection1, "C:\User\Documents\Data\dataname")
Export(DataName, location)
Export(Collection1, "C:\User\Documents\Data\dataname")
With this code we could easily add it into timerEnd behaviour and we could make automatic backup files
Or
We could add this into save button where we do editing of our collection and save it straight to backup file
We could have the location and data name saved in local machine and call them in that import export code. This is exactly what I need if I want that data to be shared between multiple devices where all the data would be stored on server or
shared folder
And also for better user interface there should be a location picker (button visual) what would open explorer where we could chose the location instead of writing it down into an inputtext
What do you thing about this? Would this work?

Corrupt databook.dat without palm OS

Similar Messages

Maybe you are looking for