Corrupt emails when forwarding from my Z10

when i forward or send emails from my Z10 it is received corrupt.... 
its looks like a formatting of html code
please help

This is a know issue between some smtp hosts and the Z10. Best to call your carrier's Blackberry support team so that they can report it.
-: DrewRead :-
Can't find an app on Blackberry World yet? Tweet the developer and ask when they will #GetWithBB10 !!
"Like it" if you like it.

Similar Messages

  • HT4979 why can I not send email when away from my home wifi? Am able to receive messages OK, and outgoing mailserver is correct?

    Why am I unable to send email when away from my home wifi ? I am able to receive mail OK, and have double- checked the outgoing server which is correct. This problem is consistent with my Macbook Pro, iPhone, and iPad2.
    Attempts to send messages results in them sitting in the Outbox and never- ending 'sending message' displayed.
    I am able to send using my   me.com  server.
    Home service provider is Cogeco.
    Any help would be appreciated.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try a Reset - iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    Or this - Delete the account in Mail and then set it up again.
     Cheers, Tom

  • My iPhone will not send emails when away from my home wifi

    my iphone will not send emails when away from home wifi any advice

    Hey craggee,
    Thanks for the question. This is usually do to a limitation by your ISP/email provider:
    If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Thanks,
    Matt M.

  • Can emails when delted from iphone also be deleted from the computer email also

    can emails when deleted from the iphone also be deleted from the computer email account.

    You might ask in the iTunes Match forum for more info, but I believe that once a song is on the device (from iTunes Match), you can't remove it but keep it in the Match.
    https://discussions.apple.com/community/itunes/itunes_match

  • When my new MacBookPro/Lion awakes from sleep I get network Diagnostics telling me I'm not connected to the internet. After I step through ND it says connection is fine and I can connect. software bug? Corrupted file carried forward from my old Mac?

    When my brand new MacBookPro awakes from sleep it has lost its internet connection. It goes to Network Diagnostics and I need to step through all the pages to get to the end where it says connection is o.k. Is this a bug in Lion or could it be a corrupt file migrated over from my old MacBook Pro which would frequently lose its Airport connection and couldn't be reconnected until it cooled down. (This one always shows full bars on the Airport indicator).

    That's definitely just paranoia.  First, because in sleep mode, there's no internet connection.  The computer might as well be turned off as far as the network is concerned, and there's no activity in the computer other than a bare trickle of electricity to maintain the RAM.  The processor is doing nothing.
    Second, Macs are quite difficult to hack, and if you're on a wireless network, the wireless router protects you from incoming attacks from the outside world.
    Of course, you should be able to leave Safari open with no open windows and not affect your ability to get online when it wakes up.  If you can reproduce that reliably, and if I can as well (haven't had a chance to try it yet), then it should be reported to Apple.

  • Does OS X corrupt files when copying from SD card to desktop?

    Using finder to copy a folder and its files from SD card to mac desktop seems to cause *some* files to be corrupted, specifically a handful of MP4 files from a FAT32 SD card  which was used in a digital camera. Using a binary/hex comparison tool reveals that some segments of the files contents were modified when copied from the SD card. 
    This error occurs when copying multiple files using Finder windows.  However, when copying the same files one at a time, the corruption does not occur.  This appears to be an OS level bug.  In reviewing past content, I found that dozens of MP4 files have been corrupted in the past 4 months by merely copying the files from the SD card to mac desktop using Finder copy/paste.
    I am using OS X Mountain Lion 10.8.3

    Well, like I said, the byte size in fact did *not* change.  So I'm not even concerned about that.  What *did* change is the content of those bytes and it doesn't matter what operating system you are using, the content of those bytes is *not* supposed to change.
    Also, like I said before, if I copy the individual file (MP4) insead of the entire folder, and then do the binary/hex comparison, the byte data is identical. i.e.
    a) copying one file at a time produces an *identical* file on the HD, i.e. the byte count AND the byte content are precisely the same.
    b) copying a folder with multiple files produces a *different* file on the HD, i.e. the byte count is the same BUT the byte content differs from the original file.

  • Exchange email being forwarded from hotmail

    Hotmail is taking over as the email client when responding from an Enterprise Exchange account.  I getting a header "[email protected] on behalf of XYZ (Exchange Email)

    Hi Andy, a couple of things to check :
    When you're sending emails to your printer do you have any other addressees in the "To:" field? If so the service will reject these messages as spam. If you want to include other addresses on the messages use the BCC field
    If you have opted to set the printers ePrint Settings to Allowed Senders Only, ensure the Hotmail email account you're trying to send from is included in that list of allowed senders.
    Let me know how you get on.  
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • Email not forwarding from iCloud!

    When I set my icloud email preferences to forward to another address, it is multiplying the messages 6x in my icloud inbox, and NOT forwarding them as indicated to the new address I have set.  Why is that happening, and how can I fix it? 

    Yes it occurs on the Webmail interface.
    Yes other devices... same result
    No mail rules setup.
    For those following...  A solution was located in a google search:
    Those having this problem, please use the Finder to open Home/Library/Mail and locate the file named MessageUidsAlreadyDownloaded3. Use Get Info to see when this file was last updated -- should be after the last time new messages were downloaded?
    Quitting Mail and removing this file, and then relaunching Mail will result in a freshening of the file, if it has become corrupted, but will once more download everything still on the server. But hopefully for the last time.
    Thanks BDAqua for your assistance!

  • Unable to Edit Email when Forwarding

    Hello,
    I am using CRM 5.0 Web IC.
    The situation is:
    I have an email in my inbox and i need to forward it.
    When i press the 'Forward' button and try to Edit the mail before sending it, i am unable to do so.
    The email opens in read only state.
    Any ideas whats stopping me from editing the email?
    Any help shall be rewarded.
    Regards,
    Sharif.

    Hi Sharif
    Were you able to resolve this issue?  I face a similar problem currently.
    Thanks in advance
    Eddie

  • UWL send email when forwarding WF items

    Dear Experts,
    Please help to send email notification from PORTAL when a user forwards a WF item to another user by pressing FORWARD BUTTON.
    I was able to customized a Z version of RSWIWILS program for the WF ADMIN in GUI.
    The new requirement is for the PORTAL part.
    Would greatly appreciate detailed steps since my experience in Portal is very limited.
    Thank you very much.

    Hi,
    Sorry, I haven't implemented such a solution, I'm just suggesting a possible outline. Use an implicit enhancement and call a method to fire off an email.
    The main point is that your solution should not be interface-specific.
    cheers & good luck
    Paul

  • My Applemail cannot send emails when tethering from Iphone

    Hi,
    When I tether internet from my Iphone to my laptop, I cannot send emails in applemail.
    All other internet connections work fine, It looks to be the iphone perosnal hotspot thats not working.
    Has anyone else faced this issue? What is a solution?
    Thanks.

    Most likely because your carrier is doing this to stop spammers.

  • In email when switching from 1 mail to another ff "not responding" how to fix.

    when checking email then switch to another ff locks up and on top it says ff "NOT RESPONDING" Then it turns almost white. Sometimes it will flash brightly and then start working, sometimes needs to restart. This all started when ff updated itself to version26. No problem in ver 25. Writing this I am using "Ice Dragon 26, which is built from ff, but have no trouble like I do with ff and ff has been my favorite. What to do?
    "SHOULD I REDO THIS USING FIRE FOX"

    Yahoo! mail? Many, many users have discovered all kinds of problems and glitches with Yahoo! mail in Firefox when using an old bookmark saved before Yahoo!'s recent server changes.
    I suggest clearing your Yahoo cookies and entering through the main page to get a better address for your current mail server.
    To remove your Yahoo cookies -- save any pending work first -- call up the Cookies dialog while viewing any page on yahoo.com (or your Yahoo site). You can use either:
    * right-click the page > View Page Info > Security > "View Cookies"
    * Tools menu > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then go to one of these Yahoo addresses and click on login or mail from there:
    * Yahoo home page: https://www.yahoo.com/
    * My Yahoo page: https://my.yahoo.com/
    * General mail redirect: https://mail.yahoo.com/
    * AT&T users: http://att.yahoo.com/
    * Other country sites (not on .com): the main Yahoo page for your country
    Does that help?

  • Can't send emails when away from home

    I can send emails from my iphone when I'm at home, but not once I have left the house. I get the 'sending' bar at the bottom, but nothing ever happens. Any ideas?

    When at home connected to your wireless network?
    If so, is the email account provided by your internet service provider at home?
    If yes, most internet service providers don't have an authenticated SMTP server with the email account they provide which is the problem.
    Most, if not all ISPs block the use of SMTP servers that are outside of their network or not provided by the ISP unless the SMTP server is authenticated, and AT&T is no different in this regard when connected to the internet via their cellular network when sending email.
    AT&T's SMTP server is included as an available SMTP server to select/use for an email account when connected to the internet via their cellular network if an email account does not have an authenticated SMTP server. This should work when connected to AT&T's cellular network but may not work when connected to your wi-fi network at home with your internet service provider being used for your internet connection.
    I access two email accounts with the iPhone's Mail client. Both accounts have an authenticated SMTP server and I've never had any problems sending with either account regardless the internet service provider being used for my internet connection at the time.

  • Corrupt crosslinks when exported from InDesign to PDF

    Two of my colleagues are using Indesign on win7 64 bit computers.
    CS 4, one computer has indesign version 6.0.4, the other computer has version 6.0.5 - and that is the computer where our problem is.
    When we open a file in indesign and chose the alternative Export to PDF, export with hyperlinks and bookmarks, a pdf-file is created. Some of the links are ok, but most of them doesn´t work. The properties for the link seems to be ok with the correct destination name. (and if we try to export the same indesign file from the other computer all links are ok, so the orignal file must be ok?)
    We have tried to create a new user account on the computer, with full admin-permissions.
    Any other ideas, anyone?

    I´m not a user of the program myself, so i´m not definetely sure... What we have done on the problematic computer is to reset the settings. We got help to remove some setting-files.
    Are there any specific settings that you might know about, that could cause this kind of trouble? We have checked in acrobat that "use hyperlinks" (?) is marked under Edit, Preferences,

  • Webex Sending Two emails when launched from collaboration room

    Hello,
    I have a collaboration room set up to use Webex as an online tool.  When I click the START button it actually asks me Twice about whether or not I want to launch webex and then it sends me TWO emails: one in ENGLISH and the second in GERMAN.
    Here is the contents of the GERMAN email:
    Klicken Sie hier um zu diesem Meeting zuzusagen und daran teilzunehmen: Beginnen Sie dieses Meeting
    Diese E-Mail wurde automatisch generiert. Bitte nicht antworten.
    Does any one have any ideas on what I need to do for either issue?
    Thanks
    Angie.
    Edited by: Angie Radjen on Sep 8, 2009 3:37 PM

    Hi Kumar,
    This is really a **** to do an trial and error method because it consumes lot of time.
    so here is something for u
    A step is assigned to multiple users and has a minimum threshold of approvals assigned (that is, assignees are user 1, user 2, and user 3, and two of the three are required to approve before this step can be completed). In this case,
    u25CF     two of the three users must approve before the step is considered approved
    u25CF     if two of the three users reject it, the step is rejected, and consequently will either return the task to the last Action Item assignees or, if no previous Action Item exists, will conclude the task, with the history reflecting the rejection.
    in my trial i had only two user connected to a group so sometimes second step is recieved by user 1 or user 2 . if one of them approves then document is getting approved and goes to next step
    it is same in the case of rejection too.
    i hope now everything would be clear
    have a look at this [Link|http://help.sap.com/saphelp_nw70/helpdata/EN/a1/eb3f54ab7c4ce39408f38d9eb52f65/frameset.htm]
    Regards,
    vijay.

Maybe you are looking for

  • Font Book does not allow me to move fonts into categories.

    I recently started using Pages to do some desktop publishing work and I decided it would help me out to make some font categories so I can find the fonts I need quickly. I set up the categories in Font Book, but after three tries in two days am about

  • Instrument stack trace on config.xml

    I upgraded my aplication from weblogic 6.1 to 8.1, "instrument stack trace" is working fine with 6.1. it is not making any difference with 8.1,(i.e) i could't see any server side exception stack trace from the client when application got deployed on

  • FCE import quality vs. iMovie

    Is FCE capable of capturing/importing video at an improved quality level than iMovie 6? I understand the superior editing & functionality aspects of FCE, but am trying to see if using FCE also gives you the ability to produce a higher quality video.

  • How to disable Deinterlace?

    I have some film based material captured from videotape. So it is originally progressive even it is in interlaced mode in the tape. I have to do resizing to it (because qt7 does not support non-square pixels in mp4's), so I'm going to use "Frame Cont

  • DVCPro HD frame rate issues

    I'm sure that this question has been asked before, but I performed a couple searches and couldn't find a thread to perfectly answer it. I have a tape that was shot (with the Pansasonic HDX900, shot to tape and not P2) at two formats, 720/24P and 720/