Corrupt .lvproj when running on a virtual machine...

Hello,
I'm writing to let you all know that if you run LV 2009 on a Windows running in a VirtualBox virtual machine and save an .lvproj file to a shared folder (a folder on the host OS shared with the virtual OS) then LV corrupts the .lvproj. However, if I save an .lvproj to a path that is within the virtual harddrive (i.e. a nonshared path) then everything works as expected.

Southern Cross,
I am curious how you were able to reproduce this problem? What OS was your host machine? What OS was your VBox? Did you happen to leave any of the files included in the project on the Virtual Box?
Here is a video of me using my Windows 7 computer with Virtual box (Windows XP) and saving a simple project to a shared folder called temp. Then I minimize and access that same project on my host computer through the shared folder.
Sincerely,
Jason Daming
Applications Engineer
National Instruments
http://www.ni.com/support

Similar Messages

Error when creating a new Virtual Machine from VMs and Templates

I try to created a VM from a Template. On a Step 1.5 (Install VM components) and falid. This is a error:
Error (10659)
Cannot run Sysprep on virtual machine SRV2k8test because the template does not have a virtual hard disk attached that has been generalized.
Recommended Action
Specify a template that has been generalized and then try the operation again.
we expect your help.

Sorry to dredge up an old topic - but got some really weird behavior.
I knew that I had to sysprep the vhdx's before bringing them into a template. I've done this (verified twice), and I still end up with the error list at the top of the thread:
Error (10659)
Cannot run Sysprep on virtual machine SRV2k8test because the template does not have a virtual hard disk attached that has been generalized.
Recommended Action
Specify a template that has been generalized and then try the operation again.
we expect your help.
I am running SCVMM 2012 R2, and things were actually running smooth as of three days ago. Templates built before then are still working and can be deployed with no problem.
However, building a new template today gives the above error when testing the deployment.
http://www.fortypoundhead.com

How to run qemu Linux virtual machines properly on android tabs.

My tab specification's are 1.2 GHz quad core processor and 1 GB ram, 16 GB internal ROM.
I want to run RHEL 5.0 X86 CLI I mean without any gui on my tab and so I followed the steps below
At first on windows I have installed qemu manager and after that I have created a virtual machine RHEL with processor option as Pentium 3 and ram option with 256 MB. The installation was successful and I am able to boot properly into it.
After that I have transferred the installation image to my tab. In order to run the virtual machine I have installed limbo qemu manager. I have selected the transferred image and specified the same options as above.
When I run the above virtual machine I am unable to boot into my system properly and I getting the following errors
kernel panic not syncing: kernel compiled for Pentium+ requires TSC feature.
general protection fault : fffa [#1]
Kindly suggest how to successfully run the above virtual machine on my tab.
Regards,
Rupesh.
Regards,
Rupesh.

You don't say what tablet you have, but all of Lenovo's Android tablets that I know of have ARM processors, not X86 processors, so what you're doing isn't going to work.

Can not see a sbRIO in MAX running on a virtual machine

I am trying to connect a sbRIO-9606 to a Windows 7 virtual machine (VMWare) running on a MacPro. I can open a CMD prompt and ping the sbRIO but when I run MAX, it does not appear in Remote Systems.
The virtual NIC is bridged to the pyhsical one (on the MAC)
Does anyone have experience doing this, or know why I cannot see the sbRIO?

Hi jaketc,
I've had similar issues at times depending on how my host and guest operating sytems network interfaces are configured. It sounds like your settings are correct (bridged), but it is difficult to guarantee. The first step I usually take is disable any network interfaces (on the host and guest OS) that are not critical to connecting to the remote target.
A more generic answer is to walk through the troubleshooting steps in this document, but it won't cover the virtualized OS considerations of your setup:
Why Does My CompactRIO Controller or Single-Board RIO Not Show Up in Measurement & Automation Explor...
Because you can ping the target, it sounds like the Single-Board RIO already has an IP address, you know what it is, and ethernet communication can be established. When I've been in that situation in the past, I've been able to manually add the RIO target to MAX. To find a system that is already configured with an IP address, simply right-click on Remote Systems and select Create New. Enter the appropriate configuration information in the dialog box, and MAX will manually place that system in the Remote Systems listing and all tasks will function properly.
Cheers,
Spex
National Instruments
To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

L How many are running trials on Virtual Machines and under what software

I'm just curious here -- I'm not sure if this Forum has something like a POLL but I'm interested in what type of Virtual Machine setups people are using.
I'd like to know HOST OS (RAM size) , Guest OS (Ram size), ABAP trial / JAVA trial / both, Virtual machine software (Vmware, Parallels, Virtual Box, Virtual PC or other).
Indication of stability, and how good the ABAP / JAVA trial performance is on the VM's as well.
Thanks in advance to anybody answering these questions for taking the time.
Cheers
jimbo

I am running the previous (SP11) version under Vmware Workstation 5.5.3 with XP SP2 on XP SP2. The machine is a Dell 9300 laptop with 2GB. I give the vm 1GB. The machine is still happy to run its usual load of about 10 other applications (word, Freemind, Thunderbox, Firefox, SAPGui, etc.) I don't run sapgui in the vm, I run it at the host level. I stick with ABAP. I am still hoping Java will go back to controlling dishwashers and toasters like the Good Lord originally intended.
It runs well in its gig. I am presently monkeying around with WebDynpro and it performs beautifully. Stability has been good except it hangs occasionally if I leave it all running when I suspend the host. I suspect this has to do with network issues. I make a point of shutting down the guest before I shut the lid.
I am going to activate autostart in the start profile so that the SAP system starts up when the vm boots. That way I don't even have to log into it.

Why my application can't can run with ojvm virtual machine

in my application ,i select the ojvm virtual machine in run configuration,but only the following returned:
1.Successful compilation: 0 errors, 0 warnings.
2.Process exited.
Debugger connection to debuggee process has been lost.
Debugger disconnected from local process.
when i change ojvm to server or anthing else ,there is not that problem any more.
why?

I have had this problem for months with no resolution from Oracle. Another similar machine works fine with OJVM. Go figure. Doesn't seem to be something Oracle is interested in resolving, but appears to be occurring on a variety of systems.

How do I run a Windows virtual machine?

I have a program for my research (Scigress) that only runs on Windows. I would like to be able to run the program on my Mac, I assume the best way to do that is to run a virtual machine. I don't want to run Windows all the time, since I strongly dislike Windows. Is there a way to do this in which I can turn Windows off as soon as I'm done with that program? What would be the best way to do this, or the best app to use? I have a 2009 Macbook with Lion installed.

I apologize, dragon. I didn't fully read your post well before opening my mouth. Sorry, "the ADD" has me (even as a grown man).
You have really two fundamental choices here on where you could take this. My primary concern above all would be "how resource intensive is this Windows software"? I mean, is it like a CAD or other 3D modeling app or otherwise just... monster? Working in the tech field I have seen CAD programs opening a complex drawing nearly bring say... a dual Xeon, 16GB RAM, 2-4GB of VRAM with cards in tandem (Crossfire or SLI in the PC world, I don't know if it's called the same over here)... but it would literally freeze these beasts of workstations solid for 5-20 minutes while opening and rendering some of these mind-blowing CAD drawings (talented guys, no way I could manage to create some of those 3D models of such just... complexity... in a virtual environment).
So-- with that being said, that's worst case scenario on the software. That would pretty much really cripple your luck with virtualization/emulation of a guest OS (that is, the operating system that is running "under the command") of the main one you're running.
If the program is not that kind of one, it would certainly be more convenient to you to just literally almost open "Windows" like it's just another app, literally... and close it/shut it down as soon as you're done, leaving your other OS X desktop work up and running.
If it *is* going to be a resource hog, then your second option is Boot Camp, which I'm sure you've heard of... You basically split the hard drive (partition it) into two segregated areas of storage and literally you can run either/or and utilize the full power of the machine this way, as you're not sharing CPU/memory. The downside, as sort of mentioned-- is that you have to boot into one or the other, it's not a "program" like the other is, almost; so you'd have to "shut down" or use the little utility app at least to reboot into OS X.
Think about your circumstances and take a look at that article comparing or also research Allan's suggestion, that is a new one to me. That will at least get you familiar with what the "experience" of virtualizing operating systems is like... then let us know what you think is best and we can go from there and help you. Sorry about jumping the gun earlier. Hope I made up for it with an abundance of information at least the second time...

Windows O/S running in the virtual machine has frozen does not want to shut down

Our old Windows-based PC is a virtual machine on our iMac (it is accessed using VMWare Fusion 2). The Windows XP Home Edition O/S froze when booting, and cannot be shut down by sending a Ctrl-Alt-Del or Force Quitting VMWare Fusion. Putting the iMac in Sleep mode or restarting it makes no difference. The virtual machine is still in a suspended state, and there appears to be no way of either getting it to finish booting the Windows O/S or shutting it down. Any ideas as to how to unfreeze it? At this point in time, all I want to do is get back into the Windows side, rescue any data files I need, and stop using the virtual machine.

VMware Fusion issues should be posted in the VMware Fusion forums:
http://communities.vmware.com/community/vmtn/desktop/fusion?view=discussions
That said, you can "Force Shut Down" a virtual machine by holding down the Option key, then clicking on the Virtual Machine Menu. "Shut Down" becomes "Force Shut Down".
More than likely what you'll need to do is hold the Option key, then choose "Force Restart" to get Windows to boot again. Then use "Force Shut Down" to power off the VM, if a normal shut down does not work after that. Do NOT close the VM window, or put the Mac to sleep as this will initiate another suspend procedure.

Debug and run programs in virtual machine

hi everyone
how are you
i want to know if there is any way to debug and run programs on visual studio to a virtual machine with a specific operating system i`m using visual studio 2013 ultimate in 64 based windows 8.1 system
thanks

but can you explain to me how can i configure remote debugger to run and debug to a virtual machine
You treat the VM as though its any other real machine on your network.
See the article I linked.
im using Vm workstation 11 and windows xp running on it
It's been a while since I used VMWare WS and I have a vague
recollection that it may have some special facility for debugging with
VS - but I never used it.
also i want to know if i can run and debug to another computer on the same network
Yes, you can - if the OS is supported by the version of VS you're
using.
Dave

Unknown error when getting list of virtual machines

I installed the VMC this morning and launched it. After validating the credentials it began a very long running process where it shows the status of 'Getting list of virtual machines'. After approx five minutes an error dialog is displayed which is blank
(aside from a red 'X'). Selecting OK leaves me with a blank list of VMs. There are no events in the application event log. Any help?
William Busby, PMP

Are you connecting to vSphere 4.0? If so MVMC does not support directly connecting to vSphere 4.0. If your 4.0 host is managed by vCenter 4.1 / vCenter 5.0 you can convert VMs on the 4.0 host by connecting to the vCenter servers that is managing the host.

AVHD files not being deleted by Hyper-V when DPM backs up virtual machines

Hi,
I understand DPM uses checkpoints to backup Hyper-V virtual machines.
We have seen a few instances whereby the AVHD files that are created at the time DPM backs up the VM are not being deleted on the CSV disk.
There are no checkpoints associated with the virtual machine in Hyper-V settings.
We did delete one of these AVHD files on a non-production system and it was successful, the AVHD files are not being used by the virtual machine.
Is it safe to delete these AVHD files? Anyone experienced anything similar?
Microsoft Partner

Hi
Could you please let su know if you have acrried out any ILR operations?
When you recover a VHD of a virtual machine that has Hyper-V snapshots, .avhd files are not displayed in the
Recoverable Items pane, but DPM recovers the parent VHD and all the associated .avhd files.
Just want to confirm that these avhd files are not coresponding to recovery process.
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

Ubuntu 7.10 freeze when create a new virtual machine

Hi
We try to create a virtual machine using Ubuntu 7.10, but when boot it freeze when begin the ISO Loading.
Log:
Plex86/Bochs VGABios current-cvs 13 Nov 2007
This VGA/VBE BIOS is released under the GNU LGPL
cirrus-compatible VGA is detected
HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $
ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (10240 Mbytes)
ata0 slave: Unknown device
ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
ata1 slave: Unknown device
Booting from CD-Rom...
ISOLINUX 3.36 Debian-2007-08-30 Copy....
Loading...
Please help us to complete the creation
Ricardo Ramos

Since Ubuntu is not officially supported for /on Oracle VM, I'm afraid you're kinda stuck on your own...
But why not use one of the freely available Oracle Enterprise Linux-distro's or even one of the host-templates made by Oracle? These work for me, incl. the Oracle 11g-database.

How well will Windows Server run in a virtual machine on OS X Server?

Does anyone have any experience running any of the flavors of Windows Server in a virtual box (either Parallels or VMware) on OS X Server?
I'm looking at setting up a new server. There are a couple of things for which windows is required. I could set up a separate windows box for these, but I'm wondering if it's feasible to set up Windows Server in a virtual box, and solve my problem that way?
The first requirement is to run an Intuit service for running Quickbooks in a network configuration
The second is a small SQL Server database. My plan is to migrate this to MySql eventually, but that is lower on the priority list.

Since you're on Windows 7 I'd probably go for using VirtualBox
https://www.virtualbox.org/ to host the virtual machine.
Downloading 2012 depends what you're after really, if you've got TechNet / MSDN then you can download it from there, otherwise you'd need to have a licenced copy. You can download 180 day evaluation versions from the Microsoft website here :
2012 - http://technet.microsoft.com/en-gb/evalcenter/hh670538.aspx
2012 R2 -
http://technet.microsoft.com/en-gb/evalcenter/dn205286.aspx

Can Hyper-V run in a virtual machine?

Ok, we all know (or should know) that Microsoft's answer is a plain "No!".
But we also know that recent hypervisors can support nested/recursive virtualization, provided the underlying CPU offers hardware virtualization; VMware's recent products (ESXi 5, Workstation 8) even support this natively,
without the need for ugly hacks.
So, my question is: can Hyper-V run succesfully (i.e. allowing to actually run virtual machines) inside other hypervisors?
If yes, which ones? And how?

Yes, it can, if the underlying CPUs support the latest virtualization extensions (Intel VT-X/EPT) and if you're using VMware products at least (Workstation 8, ESXi 5).
The relevant settings in your VM should be as follows:
monitor.virtual_mmu = "hardware"
monitor.virtual_exec = "hardware"
vhv.enable = "TRUE"
hypervisor.cpuid.v0 = "FALSE"
The first three settings can be enabled via GUI (where exactly varies slightly between Workstation and ESXi), the last one needs to be manually added to the VM's .vmx file.
Additionally, on ESXi 5, you need to add the following line to /etc/vmware/config:
vhv.allow = "TRUE"

Data not populated when run from a different machine

I have a stored procedure which populates a table
The stored procedure when it is run on my machine using SQL Plus populates data correctly in a table.
I select using SQL PLUS and it shows that the data is there
But when I run the SAME procedure ( SAME schema, SAME parameters, same everything ) from a
different machine using SQL PLUS , it shows that "PL/SQL procedure completed successfully", BUT does not populate
the table.
SAme thing is happening for all other procedures too.
Why is this happening
Please help
Ashwin

I checked using this
SELECT * FROM V$PARAMETER WHERE LOWER(NAME) ='nls_language'
AND I get same results on both machines
NUM NAME TYPE
VALUE
ISDEFAULT ISSES ISSYS_MOD ISMODIFIED ISADJ DESCRIPTION
UPDATE_COMMENT
96 nls_language 2
AMERICAN
TRUE TRUE FALSE FALSE FALSE NLS language name
Thanks
Ashwin N.

Corrupt .lvproj when running on a virtual machine...

Similar Messages

Maybe you are looking for