Corrupt or unreadable file

I just bought a new 60gb IPod. Installed ITunes and tried adding songs to my ipod. Being that this is a new installation of ITunes I did not expect any errors. Then as I connect the Ipod and try copying songs to it I get an error saying, "corrupt or unreadable file \program files\itunes\itunesprefs". Now the songs that are copied show up under the Ipod but when using my Ipod there is nothing in it.
Now i still use dial-up, i did not expect to have to update the moment i got my Ipod.

Possibly. It looks like you have a bad or incomplete iTunes install.
If resetting the .pref files does not help, then do a 'Repair Install':
- Start menu -> Settings -> Control Panels -> Add or Remove Programs
- Select iTunes, Select Change/Remove button, Select "Repair", Click OK
- After it finishes, reboot the PC
COMPUTER PREPARATION for REPAIRING, INSTALLING or UNINSTALLING
Prior to Repairing, Installing or Uninstalling ANY software package, close ALL running programs. In addition, you should temporarily disable any TSR (Terminate & Stay Resident) programs like firewalls, virus scanners, spy sweepers and the like. You will need to disable them both before uninstalling ANY software and/or before installing ANY software. Most of these TSR programs have System Tray Icons (usually located in the lower-right corner of your XP screen), that allow for an ‘exit’ or ‘quit’ or ‘shutdown’. Usually a single right-click on the icon will bring up a selection menu.

Similar Messages

  • Corrupted and unreadable file

    Hi There,
    I need some help with iTunes. Yesterday I went to use iTunes and instead of opening, I got something that said,*"The iTunes application could not be opened. The file or directory is corrupted and unreadable."*
    So I'm still unable to open it. I even tried to download the latest version of itunes last night, but I'm still getting the same thing. HELP! Thanks in advance.
    Heather M.

    I haven't seen that one, I would start with a disk check.
    Open my computer and right click on your c: drive. Select Properties>>Tools>>error checking.
    If that finds an fixes a problem it may be necessary to do a repair install of iTunes.
    Please report back with results.

  • Unable to Open Itunes because of a corrupt or unreadable file.

    I have uninstalled and reinstalled itunes several times on this computer and every time I try to open it I get an error message reading "The itunes applications could not be opened. The file or directory is corrupt or unreadable". At the same time in the bottom right corner of my computer a box appears saying that the itunes.exe file is corrupt. I don't know what to do if uninstalling and reinstalling doesn't work. Any help is appreciated.

    We'll first try running a disk check over the C drive (or whichever drive you have your iTunes program files installed on). There's Vista instructions in the following document.
    [Check your hard disk for errors|http://windows.microsoft.com/en-us/windows-vista/Check-your-hard-disk-fo r-errors]
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors. You'll probably need to schedule the scan to run on restart. The disk check should take quite a while to run. If it quits after a few minutes or seconds, something's interfering with the scan.
    Does the disk check find/repair any damage? If so, are you able to reinstall iTunes now?

  • Ipod cannot be synced. The file or directory is corrupted and unreadable

    I have recently had to reload windows xp home edition on my computer and wanted to connect my ipod to load some new music. As it was a new installation the ipod was not recognised. I loaded to latest version of itunes that I have just downloaded and was asked whether I wanted to sync my ipod with this computer in which case I would lose everything that was on the ipod. I choose yes to sync to the new computer but got the error message "the ipod "ipod" cannot be synced. The file or directory is corrupted and unreadable". I simply recharged the ipod and continued to use it for a day but then it just ran through the tracks without playing anything until it came to the end of an album and returned to the main menu.
    As I cannot play anything I wanted to restore and reload but cant. Could anyone offer any help ? Thanks
    60gb photo   Windows XP  
    60 gb photo   Windows XP  

    I have just managed to connect my ipod through itunes to restore it. However when I tried to connect it to the wall socket to complete the update nothing happens. I have checked the fuse in the plug and that is okay, but the ipod does nothing, not even a light on the display when connected. It seems to have locked up. If I hold it close to my ear I can hear a gentle hum. Also the ipod is not showing up in windows explorer.
    Any suggestions ?
    Thanks

  • Ipod cannot be synced. File or directory is corrupted and unreadable.

    After I tried reconnecting my ipod to my computer, the message "The iPod cannot be synced. The file or directory is corrupted and unreadable." popped up in iTunes and it wouldn't let me access any of the songs on my ipod. I ejected it and checked the ipod, and all of my songs were still on there, but whenever I try and connect it to iTunes the same message pops up and when I go to the music list, nothing is there, though it states 3 GBs of space is being taken up (the amount of space my songs use).
    I figured the problem might lay in iTunes and not my iPod, but while there was a problem and I did manage to fix it, the newly downloaded iTunes still gave me the same message as before.
    I figure I could try reformatting the iPod, since it looks like that might solve the problem, but I don't have any of the songs on my iPod backed up, so I was hoping someone might be able to offer another solution. =/
    *To sum things up: songs are still on my iPod and I can listen to them after ejecting, but syncing up to iTunes is no longer possible (so no new music ;_; ). Problem most likely isn't with iTunes and I'd prefer not to reformat the iPod.*

    I have just managed to connect my ipod through itunes to restore it. However when I tried to connect it to the wall socket to complete the update nothing happens. I have checked the fuse in the plug and that is okay, but the ipod does nothing, not even a light on the display when connected. It seems to have locked up. If I hold it close to my ear I can hear a gentle hum. Also the ipod is not showing up in windows explorer.
    Any suggestions ?
    Thanks

  • Error: "The file or directory is corrupted and unreadable"

    This is driving me nuts.
    I've had my 5th gen. iPod for over a year now, but just two days ago, when I plugged it in to my computer I received a message saying, "The iPod "name here" cannot be synced. The file or directory is corrupted and unreadable."
    To solve this problem, I tried using different USB ports, restarting my iPod, and reinstalling iTunes - all to no avail. I'd really like to avoid restoring my iPod, so I haven't tried that option yet. The iPod works fine outside of adding new music. Also, I ran chkdsk and got nothing from it.
    I'm very sad about this. I love my iPod and I want to be able to put new music on it! Any suggestions?

    Thanks for the reply!
    I downloaded the program and ran it, got to the point where it says I have errors that need to be fixed... but it appears I have to pay for the rest of the program to actually repair these errors. Is this incorrect?
    If I do have to pay, then I'd like to look for an alternative... the program is $40; of course, that's cheaper than buying a new iPod, but I want to avoid that too.

  • Files or directory\Windows\System32 is corrupt or unreadable

    Hi, I have a lenovo T61p laptop. I am having an issue with trying to start the laptop. It is running Vista and we are getting the following error – files or directory\Windows\System32 is corrupt or unreadable. Please run the chdsk utility.
    I am also seeing an error saying: The instruction at 0x7637c511 referenced memory at 0x00000002. The memory could not be written.
    Vista came pre-installed so i do not have a disc.
    Does anyone have any suggestions on how we could fix the issue?

    Check the Hard disk.Try the bootable version of Lenovo Hard drive quick test
    http://www-307.ibm.com/pc/support/site.wss/MIGr-70578.html#boot
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • ITunes Library file corrupt or unreadable -- unable to be saved

    When I open itunes, I have to import my library everytime... and it says that the library file is corrupt or unreadable and cannot be saved. Can anyone else with this issue, please?

    hmmmm. perhaps try running a chkdsk over the drive on which your iTunes library file is stored:
    How to perform disk error checking in Windows XP
    does that find/repair any damage? if so, do you still get the same message from your itunes?

  • Cannot sync the file or directory is corrupt or unreadable

    I have removed the backups, removed all  photos restarted everything but I am still getting this error.  any ideas?

    I dont get an error number.  It says The iPhone cannot be synced.  The file or directory is corrupted and unreadable.
    I managed to sync one time and then I tried to update the photos and got the error again.  Clearly there is some issue with the photos but I have removed everything from the camera role so it shouldn't be that but I cannot work out where the issue lies.
    I also had a similar problem with my ipad which I haven't had time to investigate.  Could it be something to do with itunes itself?

  • File or directory is corrupt and unreadable - Updates

    Every time I connect my U2 ipod to my computer...there is an update for my ipod and itunes EVERY DAY and I get an "exclamation" point with the following error message: The file or directory iPod\_Control\Device\SysInfo is corrupt and unreadable. Please run the chksk utility. I did that. It happened quick. I went to chksk.exe and all tests were good.
    I have the 3.1 version on my ipod and 5.0.1 on itunes...what's wrong?

    I updated my ipod to 3.1 and itunes to 5.0.1 and the problem is gone...this advice was given to me in the Apple Computer Forum...I posted there by mistake! This way could be softer because you will not lose anything...I just wanted you all to know there is another solution. Thank You.

  • File or directory \ipod_control\itunes\itunesprefs is corrupt or unreadable

    Every time I connect my ipod (30g video) to my computer it pops up the "ipod setup assistant". Then I get a message on the bottom right of my computer screen that says "file or directory \ipod_control\itunes\itunesprefs is corrupt or unreadable, please run chkdsk. I ran chkdsk and it didn't help. I'm sure this is an easy problem, but I am clueless. Can anyone help?
    Dell   Windows XP  

    Greetings,
    What you want to do here is to Restore your iPod using the latest iPod Updater.
    Restoring: http://docs.info.apple.com/article.html?artnum=60983
    iPod Updater: http://www.apple.com/ipod/download/
    We have been discussing the chkdsk issue since Nov 2004, when it was introduced by some particularly buggy iPod firmware.
    For more info visit our thread: http://discussions.apple.com/thread.jspa?threadID=179452
    and the Apple KB article on the issue: http://docs.info.apple.com/article.html?artnum=300554
    Feel free to post back should you require further assistance. There is a whole stack of information on the chkdsk issue, but I won't seek to bore you with it here...
    I add a note of caution - in that chkdsk issues usually affect Gen4+ iPods, and you have a Gen5. If the Restore does not solve your problems, let us know. I have been consulting on some cases where a hardware fault was to blame, and the user had to get their Pod changed out...
    Kind regards,
    Gopha

  • Unable to delete job logs - Error : file is corrupted or unreadable

    Hi,
    We are running SolMan on Windows 2003 and there are some very old job logs (dated 2009) in "F:\usr\sap\sid\SYS\global\000JOBLG\" which we are unable to remove.
    The error is "The file or directory is corrupted or unreadable".  Because of this, Data Protector backup always has errors.
    I have run "RSBTCDEL2" but these logs were not removed.
    Is there a way to remove these stubborn old job logs?
    Thanks in advance

    >
    Sisab Nimda wrote:
    > Hi,
    >
    > We are running SolMan on Windows 2003 and there are some very old job logs (dated 2009) in "F:\usr\sap\sid\SYS\global\000JOBLG\" which we are unable to remove.
    >
    > The error is "The file or directory is corrupted or unreadable".  Because of this, Data Protector backup always has errors.
    >
    > I have run "RSBTCDEL2" but these logs were not removed.
    >
    > Is there a way to remove these stubborn old job logs?
    >
    > Thanks in advance
    Hi Sisab,
    Best is to determine whether you actually have the jobs from 2009 ( completed / Cancelled ones ) in your Solution manager system. If they donot exist in the job tables ( normally can be seen using transaction SM37 and a date range ), just go ahead and delete the joblogs from the OS level from 2009.
    Regards
    Amit

  • "This ipod cannot be updated. The files are corrupted and unreadable"

    This message now appears when I connect my ipod to itunes....
    "This ipod cannot be updated. The files are corrupted and unreadable"
    The ipod still works and charges, but it will no longer let me add new files to it. The contents of my ipod are still displayed as usual on itunes, so it obviously is reading it to some degree. It advises me to run a chkdsk utility, but I have no idea how to do this.
    Has anyone encountered a similar problem? Does anyone know how I can fix this problem?
    Many thanks

    If your iPod is corrupt then you have no choice but to restore it.
    Before you do that, you may have some success getting the music off it and onto your hard drive again.
    Check out the instructions/suggestions here.
    Music from iPod to computer.

  • Can't import to iTunes  "file or directory corrupted and unreadable"

    When I try to import music to iTunes from a CD this error message shows "Error occurred while converting the file "xxx". The file or directory is corrupted and unreadable." The CD plays fine in iTunes.
    I get a similar message when I try to import MP3's downloaded off email onto my desktop "Attempting to copy to the disk 'New Volume' failed. The file or directory is corrupted and unreadable." The MP3's play fine through MediaPlayer.
    I have removed iTunes and re-installed. Any advice?
    Thank you

    Have you tried running a disk check?
    Go to My computer, right click on your c:drive and select Properties>>tools>>error checking.
    The check starts next time you reboot your PC and can take a while.
    The other thing you could try is to set up a new account and see if the problem occurs there.

  • The file or directory is corrupted and unreadable.

    Every time I try to add photos to my iPod, i get a message that says "The iPod "SEAN'S MUSIC MACHINE" could not be updated. The file or directory is corrupted and unreadable." What do I do to fix this?

    I reset my ipod on Itunes and it deleted all my songs.Now i have an Ipod that is un-updatable,and has no music. When i plug in my IPod the it doesnt even come up on Itunes. Does anybody know what the deal is?

Maybe you are looking for

  • Disappering cursor when placing multiple file in Indesign.

    When placing multiple file (jpeg, tiff's, pdf files,etc.) in a indesign document, my cursor disappears. If you can get to the desktop and click on it, it will come back. first started in Indesign CC 2014, Any fix for this? Thanks, Dennis

  • Is 10.2.0.2 .patch_storage still needed after 10.2.0.3 upgrade

    I still have 1 GB in .patch_storage in the 10.2.0 Oracle Home after upgrading from 10.2.0.2 to 10.2.0.3. Can I delete it if I have not applied any 10.2.0.3 interim patches yet, or at least the ones that do not appear in the Inventory? I guess 2 inter

  • FB03 transaction gives runtime error due to time out!

    Hi All, In the transaction FB03, I entered a reference number that has not yet been created and then a company code of 2130 and fiscal year 2010 and hit enter. It takes a lot of time to show the error message that "No documents exists which fulfills

  • Making field as Display only

    Hi Experts, I am trying to grey out the Assignment field in FB01 transaction based the value provided in Documnet type in FB01 mail screen. When ever user enters Document type as 'ZZ', then Assignment field should be grey out in next screen. I tried

  • Mouse event with Javascript API

    Hi, Is it possible to register for mouseclick with the javascript API as with the normal API reference ? What I have done in javascript is : Add button and menu item to draw circle annotations. When you click on a button or a menu item its draws a ci