Corrupt Psd with black,red noise....after PS crash

Hi ,
Someone please help me. I have lost a psd file after an unexpected power failure ..... I have been working on the file and was using the transform tool on a layer and the power went off. Later when i reopened the file it shows a black scren with red lines on a single layer. All layer info is gone. The power DIDNT go when i was saving the file atill it got corrupted. When click file-open....i seee the preview of the psd...but when i open its black
Please help me....I lost 34 hours of work with that file.....there must be some way to get back any info at all...
BTW i also saved the temp files as back up in case it could be of any help
HELP HELP HELP!.

Generally speaking, you should be able to find the last version of the file you saved intact, since Photoshop shouldn't have been doing any file operations to your saved master copy during a Transform.
I'm sorry to say that for the most part people who post here don't often seem to report recovering data successfully from corrupted PSDs.  That's not to say you shouldn't try, but don't get your hopes up. 
I'd suggest starting with a Windows "Check for Errors" (CHKDSK) on the drive just to make sure the file structure itself is not corrupted.  Sometimes that operation can recover lost data.
This is one of the reasons I made an enhancement request for the Adobe software to move the older version of a file to the Recycle Bin when you do a save.  That way there would at least be some history of previous files available.  But at the moment they don't do that.
Best of luck.
-Noel

Similar Messages

  • Cannot activate with my serial number after Harddisk crash

    My harddisk crashed, I installed my dreamweaver MX2004 from my orginal disk.
    I entered my serial No. - but activation didn't work.
    I tried to activate by phone - not successfull, phone no. doesn't exist.
    Is there a german telephone number for activating this product?
    Thanks for urgent help - and sorry for my bad english
    Anga

    THANK YOU!!!!! Seems to work J
    Best regards
    Annette Gallas
    Von: Dave Merchant [email protected]
    Gesendet: Samstag, 20. Juli 2013 15:39
    An: webhexe
    Betreff: Cannot activate with my serial number after Harddisk crash
    Re: Cannot activate with my serial number after Harddisk crash
    created by Dave Merchant <http://forums.adobe.com/people/Dave+Merchant>  in Dreamweaver CC - View the full discussion <http://forums.adobe.com/message/5522897#5522897

  • What's with the CLICKING noise after every edit?

    In the latest version of GB, whenever I make a simple splice to a voice track, there's a CLICK artifact at the tail of every edit. In order to remove it, I have to zoom in and really play with the length of the clip to get rid of the click. This is REALLY annoying because I know I'm not cutting during an active waveform. In other words, there's "silence" when I make the cut, yet I keep getting an audible CLICK every time. The old version of GB did NOT do this. A clean cut was a clean cut. This is obviously a bug. Does anyone know of a workaround to avoid this artifact? Thanks!

    Generally speaking it's:
      720x480 @ 29.97 fps for NTSC (or 23.976 for NTSC Film)
      720x576 @ 25 fps for PAL
    Anamorphic video formats (e.g 16:9 aspect) is accomplished either by (rarely) scaling the image down and including black pixels at the top and bottom of the image, or (usually) by the setting a flag which tells the DVD player to stretch the pixels horizontally, scaling the image and automatically adding black at top and bottom if needed.
       !http://img228.imageshack.us/img228/5186/scottdartve1.png!

  • Corrupted files with automatic red finder tags! :(

    Hello,
    it's for some time that my mac corrupts files, particularly those videos stored on various hard disk randomly. Each file has a red finder tags and I am not able to open them though I see it size that seems ok...I tried to check hard disk but this not solve problems...
    Sorry for my bad english...
    https://www.dropbox.com/s/qmxoqq650cg09cp/box.jpg?dl=0
    Any suggestions?
    Thanks

    I have today encountered a problem opening old Keynote presentations on my new iMac running Leopard. It cannot open any of the old presentations on my machine because it says they are damaged.
    I also could not open an old Pages file because it says the file is corrupt and there was a .xml missing. I later managed to open this by searching for it directly through the application "Open" command and following the search path. It then gave the usual " This was created by a previous version of Pages..." and the Save as warning, but it did open when I went this route. (I have now saved this document as Pages 08 and all is well).
    There seems to be a bug in the iWork '08 suite when it comes to older documents.

  • HT1386 using iPod nano with new hard drive after original crashed

    My PC hard drive died. My iPod hasa bunch of music on it. I reloaded iTunes on my new drive. Now I can't load any music from iTunes to my iPod without erasing my current content. How do I fix this?

    Transfer iTunes purchases by:
    http://support.apple.com/kb/HT1848?viewlocale=en_USiTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - Transfer othre music by using a third-party program like one of those discussed here:
    Copy music
    - To retain app data and other information, connect the iPod to yur computer and make a backup by right clciking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note that the Backup that iTunes makes does not include synced media like apps and music.

  • How to stop tabs re-opening after firefox crashes.........when it crashes and I have multiple tabs open, when re-starting firefox all of the tabs re-open too. How can I stop this?

    Firefox crashes quite often, especially when I have multi tabs open. I usually have to use CTRL ALT DEL and end the process as Firefox stops responding.
    My problem is not the crashing........it is the re-opening of the multiple tabs I had open, when normally it is one of them (not the home page) that caused the crash in the first place, so I cannot re-open firefox until I restart the pc, because every time I do it is the same story. Firefox tries to re-open all of the tabs and stops responding. I have looked in options but nowhere does it allow me to stop multiple tabs opening after a crash. If this continues, I will have to uninstall Firefox and stick to Chrome.

    Set the pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    *http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    * http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold (user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

  • I want Firefox to open to my homepage every time after it crashes. I do not want it to return to the tabs and applications that caused the crash. I am willing to lose information. How do I do this?

    Firefox crashes or seizes up when there are too many tabs and applications open, and causes my computer to crash or seize up. I use task manager to close Firefox or I restart my computer. Then, when Firefox restarts again, it automatically re-opens all the tabs and applications that caused the computer to seize or crash in first place. This is a waste of my time. I want Firefox to reopen to my homepage even if it crashes. I am willing to lose information to have Firefox reopen to a low-memory homepage. How do I do this?

    Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    * http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    * http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
    See also:
    * https://wiki.mozilla.org/Session_Restore#Preferences
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold (user set).
    *Preferences can be reset to the default via the right-click context menu if they are user set
    *Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

  • Previous webpages automaticlly load after a crash. Where can I turn this feature off ?

    When Firefox crashes, I don't want the previous webpages I had open to load. They are the reason it crashed in the first place. I only want it to start up at my home page. Is there an option to turn this feature off ? If not, is there a setting in the registry I could change ? Any advice is appreciated. -Thank you

    Set the pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    *http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    * http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold(user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

  • After a crash, when Firefox is restored, I get many blank pages opening, in addition to the correct page. It takes a while to close them all.

    The new version of Firefox also seems to be crashing more than the old.

    Set the pref [http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes browser.sessionstore.max_resumed_crashes] to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen the other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />

  • [solved]black screen with xorg 1.6 after resume (intel)

    after upgrading to xorg-server 1.6 no matter if i use s2ram or s2disk, first resume works fine, the second suspend and resume results in a black screen without any chance to swich to any tty.
    i have read about bug like this which was resolved with using intel legacy driver. however my problem still occures.
    maybe there is some module i should load/unload/reload on hibernate/wake-up?
    here is my xorg.conf, lspci, Xorg.0.log.old (the one i had to kill with black screen) and Xorg.0.log
    xorg.conf
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    Option "DontZap" "false"
    EndSection
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Cursor" "SendCoreEvents"
    InputDevice "Stylus" "SendCoreEvents"
    InputDevice "Eraser" "SendCoreEvents"
    EndSection
    Section "InputDevice"
    Identifier "Cursor"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "cursor"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "Mode" "Absolute"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    EndSection
    Section "InputDevice"
    Identifier "Stylus"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "stylus"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "TPCButton" "off"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    Option "Mode" "Absolute"
    EndSection
    Section "InputDevice"
    Identifier "Eraser"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "eraser"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/local"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "extmod"
    Load "xtrap"
    Load "dbe"
    Load "dri"
    Load "glx"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "base"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de, ru"
    Option "XkbVariant" "nodeadkeys, winkeys"
    Option "XkbOptions" "grp:caps_toggle"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
    BusID "PCI:0:2:0"
    Option "FramebufferCompression" "on"
    Option "AccelMethod" "EXA"
    Option "Tiling" "on"
    Option "TrippleBuffer" "true"
    Option "MigrationHeuristic" "greedy"
    Option "RenderAccel" "true"
    Option "ExaNoComposite" "false"
    Option "EnablePageFlip" "true"
    Option "DRI" "on"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "dri"
    Mode 0666
    EndSection
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
    00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
    02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
    04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
    04:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
    04:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
    Xorg.0.log
    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 10 April 2009 07:03:14PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:54 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Cursor"
    (**) |-->Input Device "Stylus"
    (**) |-->Input Device "Eraser"
    (**) Option "DontZap" "false"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/local,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "xtrap"
    (WW) Warning, couldn't open module xtrap
    (II) UnloadModule: "xtrap"
    (EE) Failed to load module "xtrap" (module does not exist, 0)
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "wacom"
    (II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
    (II) Module wacom: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Wacom driver level: 47-0.8.3-2 $
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "EXA"
    (**) intel(0): Option "DRI" "on"
    (**) intel(0): Option "FramebufferCompression" "on"
    (**) intel(0): Option "Tiling" "on"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
    (--) intel(0): Chipset: "915GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xA0080000
    (II) intel(0): 2 display pipes available.
    (**) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (II) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x768
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
    (WW) intel(0): PIPEASTAT before: status:
    (WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 363776 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1455100 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xa0080000
    (II) intel(0): [drm] ring buffer = 0xc0000000
    (II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
    (II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
    (II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
    (II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (**) intel(0): Option "MigrationHeuristic" "greedy"
    (**) intel(0): Option "EXANoComposite" "false"
    (II) EXA(0): Offscreen pixmap area of 12582912 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
    (II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
    (II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
    (II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
    (II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (WW) intel(0): Option "TrippleBuffer" is not used
    (WW) intel(0): Option "RenderAccel" is not used
    (WW) intel(0): Option "EnablePageFlip" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 203
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/input/mice"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "base"
    (**) Keyboard0: XkbRules: "base"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "de, ru"
    (**) Keyboard0: XkbLayout: "de, ru"
    (**) Option "XkbVariant" "nodeadkeys, winkeys"
    (**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
    (**) Option "XkbOptions" "grp:caps_toggle"
    (**) Keyboard0: XkbOptions: "grp:caps_toggle"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (**) Option "SendCoreEvents"
    (**) Cursor: always reports core events
    (**) Cursor device is /dev/ttyS0
    (**) Cursor is in absolute mode
    (**) Cursor: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Cursor: keeps shape
    (**) Option "BottomX" "24576"
    (**) Cursor: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Cursor: bottom y = 18432
    (**) Option "BaudRate" "9600"
    (**) Cursor: serial speed 9600
    (II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
    (**) Option "Device" "/dev/ttyS0"
    (**) Option "StopBits" "1"
    (**) Option "DataBits" "8"
    (**) Option "Parity" "None"
    (**) Option "Vmin" "1"
    (**) Option "Vtime" "10"
    (**) Option "FlowControl" "Xoff"
    usbDetect: can not ioctl version
    (==) Wacom using pressure threshold of 15 for button 1
    (==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
    (==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Stylus: always reports core events
    (**) Stylus device is /dev/ttyS0
    (**) Stylus is in absolute mode
    (**) Stylus: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Stylus: keeps shape
    (**) Option "BottomX" "24576"
    (**) Stylus: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Stylus: bottom y = 18432
    (**) Stylus: threshold = 15
    (**) Stylus: max x set to 24576 by xorg.conf
    (**) Stylus: max y set to 18432 by xorg.conf
    (**) Stylus: max z = 255
    (**) Option "TPCButton" "off"
    (**) Option "BaudRate" "9600"
    (**) Stylus: serial speed 9600
    (II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
    (==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Eraser: always reports core events
    (**) Eraser device is /dev/ttyS0
    (**) Eraser is in absolute mode
    (**) Eraser: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Eraser: keeps shape
    (**) Option "BottomX" "24576"
    (**) Eraser: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Eraser: bottom y = 18432
    (**) Eraser: threshold = 15
    (**) Eraser: max x set to 24576 by xorg.conf
    (**) Eraser: max y set to 18432 by xorg.conf
    (**) Eraser: max z = 255
    (**) Option "BaudRate" "9600"
    (**) Eraser: serial speed 9600
    (II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
    (==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (II) config/hal: Adding input device ThinkPad Extra Buttons
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Video Bus
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    Xorg.0.log.old
    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 10 April 2009 07:03:14PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:40 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Cursor"
    (**) |-->Input Device "Stylus"
    (**) |-->Input Device "Eraser"
    (**) Option "DontZap" "false"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/local,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "xtrap"
    (WW) Warning, couldn't open module xtrap
    (II) UnloadModule: "xtrap"
    (EE) Failed to load module "xtrap" (module does not exist, 0)
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "wacom"
    (II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
    (II) Module wacom: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Wacom driver level: 47-0.8.3-2 $
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "EXA"
    (**) intel(0): Option "DRI" "on"
    (**) intel(0): Option "FramebufferCompression" "on"
    (**) intel(0): Option "Tiling" "on"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
    (--) intel(0): Chipset: "915GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xA0080000
    (II) intel(0): 2 display pipes available.
    (**) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (II) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x768
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0c00
    (WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
    (WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
    (WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
    (WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
    (WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
    (WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
    (WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
    (WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
    (WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
    (WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
    (WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
    (WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
    (WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
    (WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
    (WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
    (WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
    (WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
    (WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
    (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
    (WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
    (WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 363776 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1455100 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] loaded kernel module for "i915" driver.
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xa0080000
    (II) intel(0): [drm] ring buffer = 0xc0000000
    (II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
    (II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
    (II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
    (II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (**) intel(0): Option "MigrationHeuristic" "greedy"
    (**) intel(0): Option "EXANoComposite" "false"
    (II) EXA(0): Offscreen pixmap area of 12582912 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
    (II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
    (II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
    (II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
    (II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (WW) intel(0): Option "TrippleBuffer" is not used
    (WW) intel(0): Option "RenderAccel" is not used
    (WW) intel(0): Option "EnablePageFlip" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 203
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/input/mice"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "base"
    (**) Keyboard0: XkbRules: "base"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "de, ru"
    (**) Keyboard0: XkbLayout: "de, ru"
    (**) Option "XkbVariant" "nodeadkeys, winkeys"
    (**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
    (**) Option "XkbOptions" "grp:caps_toggle"
    (**) Keyboard0: XkbOptions: "grp:caps_toggle"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (**) Option "SendCoreEvents"
    (**) Cursor: always reports core events
    (**) Cursor device is /dev/ttyS0
    (**) Cursor is in absolute mode
    (**) Cursor: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Cursor: keeps shape
    (**) Option "BottomX" "24576"
    (**) Cursor: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Cursor: bottom y = 18432
    (**) Option "BaudRate" "9600"
    (**) Cursor: serial speed 9600
    (II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
    (**) Option "Device" "/dev/ttyS0"
    (**) Option "StopBits" "1"
    (**) Option "DataBits" "8"
    (**) Option "Parity" "None"
    (**) Option "Vmin" "1"
    (**) Option "Vtime" "10"
    (**) Option "FlowControl" "Xoff"
    usbDetect: can not ioctl version
    (==) Wacom using pressure threshold of 15 for button 1
    (==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
    (==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Stylus: always reports core events
    (**) Stylus device is /dev/ttyS0
    (**) Stylus is in absolute mode
    (**) Stylus: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Stylus: keeps shape
    (**) Option "BottomX" "24576"
    (**) Stylus: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Stylus: bottom y = 18432
    (**) Stylus: threshold = 15
    (**) Stylus: max x set to 24576 by xorg.conf
    (**) Stylus: max y set to 18432 by xorg.conf
    (**) Stylus: max z = 255
    (**) Option "TPCButton" "off"
    (**) Option "BaudRate" "9600"
    (**) Stylus: serial speed 9600
    (II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
    (==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Eraser: always reports core events
    (**) Eraser device is /dev/ttyS0
    (**) Eraser is in absolute mode
    (**) Eraser: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Eraser: keeps shape
    (**) Option "BottomX" "24576"
    (**) Eraser: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Eraser: bottom y = 18432
    (**) Eraser: threshold = 15
    (**) Eraser: max x set to 24576 by xorg.conf
    (**) Eraser: max y set to 18432 by xorg.conf
    (**) Eraser: max z = 255
    (**) Option "BaudRate" "9600"
    (**) Eraser: serial speed 9600
    (II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
    (==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (II) UnloadModule: "mouse"
    (II) UnloadModule: "kbd"
    (II) UnloadModule: "wacom"
    (II) UnloadModule: "wacom"
    (II) UnloadModule: "wacom"
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (II) intel(0): xf86UnbindGARTMemory: unbind key 2
    (II) intel(0): xf86UnbindGARTMemory: unbind key 3
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) intel(0): [drm] removed 1 reserved context for kernel
    (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8079000 at 0xb78f7000
    (II) intel(0): [drm] Closed DRM master.
    anyone clue?
    Last edited by lynucs (2009-05-09 18:38:01)

    took a look into everything.log.
    that line looks pretty suspicious:
    kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    it occures around the time i did the last resume.
    here is a relevant snippet from everything.log:
    Apr 14 18:35:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:35:58 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:36:00 thinky acpid: client connected from 9040[0:0]
    Apr 14 18:36:00 thinky acpid: 1 client rule loaded
    Apr 14 18:38:04 thinky ntpd[6265]: adjusting local clock by -87.862975s
    Apr 14 18:42:04 thinky ntpd[6265]: adjusting local clock by -87.769493s
    Apr 14 18:42:55 thinky acpid: client 6223[0:0] has disconnected
    Apr 14 18:42:55 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
    Apr 14 18:42:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:43:07 thinky kernel: PM: Syncing filesystems ... done.
    Apr 14 18:43:07 thinky kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
    Apr 14 18:43:07 thinky kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    Apr 14 18:43:07 thinky kernel: Suspending console(s) (use no_console_suspend to debug)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D3
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Stopping disk
    Apr 14 18:43:07 thinky kernel: serial 00:09: disabled
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PME# disabled
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B disabled
    Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# enabled
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ACPI: Preparing to enter system sleep state S3
    Apr 14 18:43:07 thinky kernel: Disabling non-boot CPUs ...
    Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
    Apr 14 18:43:07 thinky kernel: Intel machine check architecture supported.
    Apr 14 18:43:07 thinky kernel: Intel machine check reporting enabled on CPU#0.
    Apr 14 18:43:07 thinky kernel: Back to C!
    Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
    Apr 14 18:43:07 thinky kernel: Force enabled HPET at resume
    Apr 14 18:43:07 thinky kernel: ------------[ cut here ]------------
    Apr 14 18:43:07 thinky kernel: WARNING: at kernel/hrtimer.c:625 hres_timers_resume+0x41/0x50()
    Apr 14 18:43:07 thinky kernel: Hardware name: 1866WBA
    Apr 14 18:43:07 thinky kernel: hres_timers_resume() called with IRQs enabled!Modules linked in: ipv6 aes_i586 aes_generic i915 drm i2c_algo_bit ext2 pcmcia psmouse thinkpad_acpi rfkill nvram i2c_i801 serio_raw iTCO_wdt iTCO_vendor_support i2c_core sg yenta_socket rsrc_nonstatic sdhci_pci sdhci pcmcia_core mmc_core video output uhci_hcd ehci_hcd usbcore intel_agp agpgart evdev thermal fan button battery ac fuse snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ath_pci wlan ath_hal(P) arc4 ecb ath5k mac80211 led_class cfg80211 tg3 libphy cpufreq_powersave cpufreq_ondemand cpufreq_conservative acpi_cpufreq freq_table processor rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sd_mod ata_piix ahci ata_generic pata_acpi libata scsi_mod
    Apr 14 18:43:07 thinky kernel: Pid: 9512, comm: s2ram Tainted: P 2.6.29-ARCH #1
    Apr 14 18:43:07 thinky kernel: Call Trace:
    Apr 14 18:43:07 thinky kernel: [<c012f9d7>] warn_slowpath+0x87/0xe0
    Apr 14 18:43:07 thinky kernel: [<c011ec25>] default_spin_lock_flags+0x5/0x10
    Apr 14 18:43:07 thinky kernel: [<c01164d0>] lapic_next_event+0x10/0x20
    Apr 14 18:43:07 thinky kernel: [<c01500e3>] clockevents_program_event+0xa3/0x170
    Apr 14 18:43:07 thinky kernel: [<c0151312>] tick_dev_program_event+0x32/0xb0
    Apr 14 18:43:07 thinky kernel: [<c0150447>] tick_notify+0x97/0x3c0
    Apr 14 18:43:07 thinky kernel: [<c01491a6>] notifier_call_chain+0x36/0x70
    Apr 14 18:43:07 thinky kernel: [<c0147ea1>] hres_timers_resume+0x41/0x50
    Apr 14 18:43:07 thinky kernel: [<c014cc3a>] timekeeping_resume+0x11a/0x140
    Apr 14 18:43:07 thinky kernel: [<c0299d91>] __sysdev_resume+0x11/0x50
    Apr 14 18:43:07 thinky kernel: [<c0299e0f>] sysdev_resume+0x3f/0x70
    Apr 14 18:43:07 thinky kernel: [<c015b410>] suspend_devices_and_enter+0x160/0x190
    Apr 14 18:43:07 thinky kernel: [<c015bb7f>] freeze_processes+0x4f/0xa0
    Apr 14 18:43:07 thinky kernel: [<c015b58a>] enter_state+0xfa/0x150
    Apr 14 18:43:07 thinky kernel: [<c015b674>] state_store+0x94/0xd0
    Apr 14 18:43:07 thinky kernel: [<c015b5e0>] state_store+0x0/0xd0
    Apr 14 18:43:07 thinky kernel: [<c0224a74>] kobj_attr_store+0x24/0x30
    Apr 14 18:43:07 thinky kernel: [<c01f3351>] sysfs_write_file+0xa1/0x100
    Apr 14 18:43:07 thinky kernel: [<c01f32b0>] sysfs_write_file+0x0/0x100
    Apr 14 18:43:07 thinky kernel: [<c01a8df0>] vfs_write+0xa0/0x160
    Apr 14 18:43:07 thinky kernel: [<c01a8f81>] sys_write+0x41/0x80
    Apr 14 18:43:07 thinky kernel: [<c0103ea3>] sysenter_do_call+0x12/0x2f
    Apr 14 18:43:07 thinky kernel: ---[ end trace 2b9e3dc85bad025f ]---
    Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x68000000)
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xa0211000)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: restoring config space at offset 0x3 (was 0x5008, writing 0xa808)
    Apr 14 18:43:07 thinky kernel: ACPI: Waking up from system sleep state S3
    Apr 14 18:43:07 thinky kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
    Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PME# disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: PME# disabled
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb2: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb3: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb4: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb5: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:1e.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# disabled
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    Apr 14 18:43:07 thinky kernel: serial 00:09: activated
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Starting disk
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
    Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
    Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
    Apr 14 18:43:07 thinky kernel: ata1: EH complete
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 14 18:43:07 thinky kernel: usb 4-2: reset full speed USB device using uhci_hcd and address 2
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: Restarting tasks ... done.
    Apr 14 18:43:07 thinky acpid: client 9040[0:0] has disconnected
    Apr 14 18:43:07 thinky logger: ACPI group/action undefined: processor / CPU
    Apr 14 18:43:07 thinky acpid: client connected from 9040[0:0]
    Apr 14 18:43:07 thinky acpid: 1 client rule loaded
    Apr 14 18:43:08 thinky dhcpcd[7651]: wlan0: carrier lost
    Apr 14 18:43:08 thinky kernel: wlan0: deauthenticating by local choice (reason=14)
    Apr 14 18:43:08 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
    Apr 14 18:43:09 thinky kernel: ath5k phy0: noise floor calibration timeout (2452MHz)
    Apr 14 18:43:13 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
    Apr 14 18:43:13 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:13 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:13 thinky kernel: wlan0: authenticated
    Apr 14 18:43:13 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:13 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:14 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 2
    Apr 14 18:43:14 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:14 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:14 thinky kernel: wlan0: authenticated
    Apr 14 18:43:14 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:14 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:15 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 3
    Apr 14 18:43:15 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:15 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:15 thinky kernel: wlan0: authenticated
    Apr 14 18:43:15 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:15 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:16 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b timed out
    Apr 14 18:43:19 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
    Apr 14 18:43:19 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 19:27:27 thinky syslog-ng[5106]: syslog-ng starting up; version='3.0.1'
    Apr 14 19:27:27 thinky kernel: Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
    Apr 14 19:27:27 thinky kernel: KERNEL supported cpus:
    Apr 14 19:27:27 thinky kernel: Intel GenuineIntel

  • T42 Display appears with small red boxes then goes black

    When I power up the display looks like a checker board with small red background squares all over the display.  I can read through them and see the display but after 3 to 5 minutes, the entire display screen goes black.
    Any ideas?  All will be much appreciated. 
    Thanks

    Your GPU (video card) has gone south. Read my reply to your other post regarding the same question...
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" the error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

    I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

    It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
    You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
    See http://kb.mozillazine.org/Unable_to_save_or_download_files

  • Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

    Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
    Looking forward to hearing from somebody with a littlemore expertise than me, Chris

    you can remove preferences files by navigating to the Preferences folder for your user as follows:
    0) Quit ALL iWork apps (Keynote, Pages and Numbers)
    1) from the Finder select the menu item "Go > Go To Folder…".  This will bring up a dialog:
    2) enter the path "~/Library/Preferences" (no double quotes)
    3) find the files:
    com.apple.iWork.Keynote.plist
    com.apple.iWork.Numbers.plist
    com.apple.iWork.Pages.plist
    and move these to the trash.  I would NOT empty until later.
    4) restart Numbers

  • My iPad wont turn on, its black screen then i press home power buttons together and white screen with black apple logo come out after 5 seconds black "lighten" screen comes out and its stuck just like that! Whats the problem?

    HI
    this happened today suddenly while i was working on my iPad it kicked my out of the app that i was using then white screen with black apple logo came out, i thought it was an ordinary thing cause this happens all the time with me, but this time it refused to turn on! After the white screen with the black logo vanished i wad waiting for my lock screen but no, a black screen showed up just like that! And could tell it was black "lighten" screen i tried more than 10 times to do the home+power thing but it wont work, whats wrong with my ipad!

    If the battery is completely drained it may take some time while on the charger before the iPad responds. Plug the iPad into the charger that came with it and plug that into a good wall outlet. Wait one hour. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the iPad restarts let it continue to charge until the battery is 100%. If it doesn't start up make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. They will examine your iPad and explain your options.

  • HT204204 My phone crashed after updating it to IOS 8. I can't use it cause its stucked on the start up menu, the apple logo with black background.

    Hi to all,
    I hope someone can help me. My phone crashed after updating it to IOS 8.3. I can't use it cause its stucked on the start up menu, the apple logo with black background. Even when I restart my phone, it is still stuck on the start up menu, the black background with apple logo in the middle.

    Slone,
    I finally decided to turn this annoyance into an opportunity.  After a lot of experimenting I found that my iPad was just fine under 7.1 if I simply restored it as new.  I have a lot of time on my hands and I had 1424 apps on my iPad!  This is why every attempt to restore took so long.
    I decided to restore as new, spend a day restoring the apps I really used.  Doing so gave me a quick iPad with only bout a quarter of the storage used.
    Granted it was a pain in the arse, but I wrote it off as in the old days when you had to do this with windows 95 just to keep a stable system.
    I DO have some data in a few files of the now unused backup but a quick google search finds a couple Mac programs out there that will allow you go extract audio recordings, app data files etc. from the backup.  I'll do that someday if I even miss the files I've probably forgotten that are there.
    Anyway, there was nothing wrong with my hardware.  I think there were just some troublesome setup items that 7.1 didn't like.  Once set up as new, the ipad was fine.
    Good luck!

Maybe you are looking for

  • What are theSNP Settings required for Forecast Consumption with Sales Order

    Hello APO Folks, I have one SNP scenario:  (We don't have GATP) Forecast for Finsihed Product - "PNG_Fert" in Location "1000". I have forecast quantity of 500, now our requirement is - when SNP heuristic run will take place (without any sales order q

  • Calculate Depreciation Forecast for Fixed asset

    Dear all expert, I'm new to ASO, would like to know if there's a way to do depreciation forcast for fixed asset in Essbase. 1. Database type is ASO 2. Assuming user will prepare forecast caplitialization of fixed asset then upload to Essbase 3. Attri

  • Interest to be calculated on the installment amount.

    Hi All, I have created installment plan and i want my system to calculate interest on the open item. I have checked out event 2010 but i am not able to get the interest calculated as the installment document has been posted as statistical document. P

  • Adding text to a formula

    Hi, How do I add text to a result, I've tried with "" but it doesn't work. And I couldn't find it in the manual. Thanks in advance.

  • Resrore Previous Session does not work in FF6

    FF6 does not save tabs, etc. when closed -- unexpectedly or by File==>Exit or by History==>Restore Previous Session (option is greyed out). No "Restore Precious Session" button appears on opening page.