Corrupt recording. Please HELP [$]

Hello. I have found a bug in the iphone system and is that when you record a large audio session (over 30min), when it finishes and you click stop a wheel starts spinning and if you press done before the spin ends, the audio file becomes corrupt and it can not be played by the iphone, pc, etc.
I have now two audio recordings that i really need to hear and the files are corrupt. I have tried to fix it with "all media fixer" with my pc and it did not work.
If you know any way to make the audio file work i would be very apreciated, i can even send some money to some1 if it helps me.
Thanks in advance.

Those are the first things you should try.
All right, then.
And plugging it back in to reload the songs takes
like 10 nimutes?
It takes a lot longer.
So your iPod is working properly now?
I don't believe I said my iPod wasn't working properly. I said everytime I tried to put songs onto it, iTunes would show that yes, I had put the songs onto my iPod, but after I unplug the iPod, the songs aren't there. I can't eject it, because when I try, a window pops up that says, "Cannot eject iPod - it is in use", or something along those lines.

Similar Messages

Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.

microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.

Try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair.

HT4085 Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i record, please help

Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help

It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
Note that this can't happen if your iPhone is not connected to a WiFi network:
When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
from here: http://support.apple.com/kb/ht4106

Adobe Premeire Pro Installation Failed - Application Manager Corrupted. Please help!

Hello all,
I just recently purchased a subscription license for Adobe Premeire Pro CS6, and tried to download it following the instructions in the confirmation e-mail.   After installing the application manager and downloading, extracting, and installing the program, I received the error message seen in the image below, "Installation Failed - Adobe Application Manager is corrupted and must be reinstalled".
So of course I googled it, and found that this was a pretty common problem, and found one site that recommended re-installing the AAM with the following link:
http://helpx.adobe.com/creative-cloud/kb/download-error-403-launching-aam.html
So I did that too. In addition to restarting my computer, and also tried to download the program directly bypassing the AAM following the instructions on this page:
http://prodesigntools.com/adobe-cs6-direct-download-links.html
All of which was unsuccesful.   I've got a video for my Mom's 60th birthday that I HAVE to complete this weekend, and Adobe's support is closed on the weekends. I didn't think installing something from a company like Adobe would be this difficult. Makes me wish I had a Mac.    Can anyone PLEASE help me get Premeire (and Encore) downloaded and installed?
Any help would be hugely appreciated.   Thanks,
Erik
(Some basic tech info: Windows 7 Home Premium x64, Mozilla Firefox, and a beast of a gaming rig that should be able to handle a simple Adobe installation)

Hi Jeff,
I am experiencing the same exact problem and am unable to resolve it. I've called Tier 1 support (Indian Call Center), and went through all the steps that I have already done myself (as outlined above) with no luck. I'm still getting the corruption error.
I am using Parallels Workstation Extreme and it is being installed on a Virtual Machine. The "Extreme" part of Parallels Workstation allows me to assign a discrete graphics card to the VM. This is uing Intel's vt-d technology for Directed IO. You mentioned above that you had fired up an instance of Windows 7 64-bit and it worked just fine. But for some reason, I am unable to duplicate the same success. The case is now being escalated to "higher" support. Here is my setup:
- Parallels Workstation Extreme VM - Windows 7 64-bit
- Subscription to Creative Cloud
- Clean Install does not work
- Not a part of any domain, just workgroup
- Home PC, so it connects directly to a router and then to Cox (ISP)
- Has direct assignment of a Network card, meaning the network card is not a bridged connection (the VM gets it's own NIC)
- User account is already Administrator, but tried to "Run as administratot" with no luck.
- After install on the clean Windows didn't work, tried using the Adobe Cleanup Tool - doesn't work either
- Disabled all start up programs from msconfig - doesn't work
- Verified that the (.exe) does work, but coping the same (.exe) to another computer and it works.
I would really appreciate any advice that you may have!
Thanks Jeff!
Here is what I am seeing from the log:
02/24/13 20:50:36:197 | [INFO] | | UPDATER | CORE | | | | 3296 | >>> Adobe Updater Log Begin >>>
02/24/13 20:50:36:197 | [INFO] | | UPDATER | CORE | | | | 3296 | UpdaterCoreImpl::InitLogFile : Application Version 7.0.0.42
02/24/13 20:50:36:197 | [INFO] | | UPDATER | CORE | | | | 3296 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = C:\Users\Administrator\AppData\Local\Adobe\AAMUpdater\1.0\aamu.log
02/24/13 20:50:36:197 | [INFO] | | UPDATER | CORE | | | | 3296 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
02/24/13 20:50:36:197 | [INFO] | | UPDATER | CORE | | | | 3296 | Stepped into << UCInitialize >> call
02/24/13 20:50:36:214 | [INFO] | | UPDATER | CORE | | | | 3296 | UpdateTracker::CheckSignature(): Missing CSUTracker.xml. Checking if it is updater's first run..
02/24/13 20:50:36:260 | [INFO] | | UPDATER | CORE | | | | 3296 | UCInitialize : AAM is launched via CCM.
02/24/13 20:50:36:261 | [INFO] | | UPDATER | CORE | | | | 3296 | Stepped into << UCSetUpdateEnginePath >> call
02/24/13 20:50:36:303 | [INFO] | | UPDATER | CORE | | | | 3296 | UCSetUpdateEnginePath : WARNING - Update engine executable signature is not valid = C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..\CCM\..\UWA\Adobe Application Manager (Updater).exe
02/24/13 20:50:36:303 | [INFO] | | UPDATER | CORE | | | | 3296 | Returning from << UCSetUpdateEnginePath >> call error = 26 retVal = 0
02/24/13 20:50:36:303 | [INFO] | | UPDATER | CORE | | | | 3296 | UCInitialize: Failed to set update engine path
02/24/13 20:50:36:303 | [INFO] | | UPDATER | CORE | | | | 3296 | Returning from << UCInitialize >> call error = 26 retVal = 1
02/24/13 20:51:34:421 | [INFO] | | UPDATER | CORE | | | | 1392 | >>> Adobe Updater Log Begin >>>
02/24/13 20:51:34:422 | [INFO] | | UPDATER | CORE | | | | 1392 | UpdaterCoreImpl::InitLogFile : Application Version 7.0.0.42
02/24/13 20:51:34:422 | [INFO] | | UPDATER | CORE | | | | 1392 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = C:\Users\Administrator\AppData\Local\Adobe\AAMUpdater\1.0\aamu.log
02/24/13 20:51:34:422 | [INFO] | | UPDATER | CORE | | | | 1392 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
02/24/13 20:51:34:422 | [INFO] | | UPDATER | CORE | | | | 1392 | Stepped into << UCInitialize >> call
02/24/13 20:51:34:445 | [INFO] | | UPDATER | CORE | | | | 1392 | UCInitialize : AAM is launched via CCM.
02/24/13 20:51:34:446 | [INFO] | | UPDATER | CORE | | | | 1392 | Stepped into << UCSetUpdateEnginePath >> call
02/24/13 20:51:34:496 | [INFO] | | UPDATER | CORE | | | | 1392 | UCSetUpdateEnginePath : WARNING - Update engine executable signature is not valid = C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..\CCM\..\UWA\Adobe Application Manager (Updater).exe
02/24/13 20:51:34:496 | [INFO] | | UPDATER | CORE | | | | 1392 | Returning from << UCSetUpdateEnginePath >> call error = 26 retVal = 0
02/24/13 20:51:34:496 | [INFO] | | UPDATER | CORE | | | | 1392 | UCInitialize: Failed to set update engine path
02/24/13 20:51:34:496 | [INFO] | | UPDATER | CORE | | | | 1392 | Returning from << UCInitialize >> call error = 26 retVal = 1

Inserting Millions of records-Please Help!

Hi All,
I have a scenario where I hvae to query MARA and filter out some articles and then query WLK1 table(Article/Site Combination) and insert the records to a Custom (z) table.the result maybe millions of records,
can anyone tell me a efficient way to insert large number of records? This is urgent.Please help.
Warm Regards,
Sandeep Shenoy

This is a sample code i am using in one of my programs. You can try similar way and insert into custom table with every loop pass.
I am considering 2000 records at a time. You can decide the no and code accordingly.
if not tb_bkpf[] is initial.
fetching the data from BSEG for each 1000 entries in BKPF to
reduce the overhead of database extraction.
    clear l_lines .
    describe table tb_bkpf lines l_lines.
    if l_lines >= 1.
      clear: l_start, l_end.
      do.
        l_start = l_end + 1.
        l_end = l_end + 2000.
        if l_end > l_lines.
          l_end = l_lines.
        endif.
        append lines of tb_bkpf from l_start to l_end to tb_bkpf_temp.
Populating the tb_bseg_tmp in the order of the database table
        select bukrs
               belnr
               gjahr
               buzei
               shkzg
               dmbtr
               hkont
               matnr
               werks
          from bseg
          appending table tb_bseg_tmp
          for all entries in tb_bkpf_temp
          where bukrs = tb_bkpf_temp-bukrs and
                belnr = tb_bkpf_temp-belnr and
                gjahr = tb_bkpf_temp-gjahr and
                hkont in s_hkont.
        refresh tb_bkpf_temp.
        if l_end >= l_lines.
          exit.
        endif.
      enddo.
    endif.

How to restore/view the deleted records - Please help me on this regard

Hi All,
Please help me in restore/view the deleted data.
I had removed 2 records from a table without back up and commited the same. Now I want to restore/view it, can you please guide me on this regard.
Oracle Version: 10g
OS: Windows XP
Database in Archive Mode.
With Regards,
Jamearon

Aman.... wrote:
<snip>
If all what you want is to view the data, you can use the Flashback's as of query which would enable you to go back either by SCN or by Timestamp. If you want to restore those rows back in the time( and losing the changes that has happened in that time ), you can use the Flashback Table option. An example of this is given below,
http://www.oracle-base.com/articles/10g/Flashback10g.php
HTH
Aman....As promised, here's one way to use flashback to restore the one deleted row without having to impact the rest of the table with a general FLASHBACK TABLE.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.01.23 15:17:56 =~=~=~=~=~=~=~=~=~=~=~=
login as: oracle
oracle@vmlnx01's password:
Last login: Sun Jan 23 15:13:10 2011 from 192.168.160.1
[oracle@vmlnx01 ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Jan 23 15:18:11 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> @doit
SQL> col col_ts for a15
SQL> conn scott/tiger
Connected.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE10.2.0.4.0Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
5 rows selected.
SQL> --
SQL> alter session set nls_timestamp_format='hh24:mi:ss.FF';
Session altered.first we will create a test table and populate it. Pay close attention to the row identified by col_id=2
SQL> drop table flashtest;
Table dropped.
SQL> create table flashtest
2   (col_id number(1),
3    col_ts timestamp,
4    col_txt varchar2(10)
5   );
Table created.
SQL> --
SQL> insert into flashtest
2    values (1, systimestamp, 'r1 v1');
1 row created.
SQL> commit;
Commit complete.
SQL> exec dbms_lock.sleep(5);
PL/SQL procedure successfully completed.
SQL> --
SQL> insert into flashtest
2    values (2, systimestamp, 'r2 v1');
1 row created.
SQL> commit;
Commit complete.
SQL> exec dbms_lock.sleep(5);
PL/SQL procedure successfully completed.
SQL> --
SQL> insert into flashtest
2    values (3, systimestamp, 'r3 v1');
1 row created.
SQL> commit;
Commit complete.
SQL> exec dbms_lock.sleep(5);
PL/SQL procedure successfully completed.
SQL> --
SQL> select * from flashtest;
    COL_ID COL_TS          COL_TXT
         1 15:18:14.896167 r1 v1
         2 15:18:21.841682 r2 v1
         3 15:18:28.772038 r3 v1
3 rows selected.
SQL> --
SQL> update flashtest
2   set col_ts = systimestamp,
3       col_txt = 'r2 v2'
4   where col_id = 2;
1 row updated.
SQL> commit;
Commit complete.
SQL> select * from flashtest;
    COL_ID COL_TS          COL_TXT
         1 15:18:14.896167 r1 v1
         2 15:18:35.929847 r2 v2
         3 15:18:28.772038 r3 v1
3 rows selected.
SQL> exec dbms_lock.sleep(5);
PL/SQL procedure successfully completed.So at this point we can see that we have 3 rows, and row 2 has been modified from its original values.
Now we will delete that row.
SQL> --
SQL> delete from flashtest
2 where col_id=2;
1 row deleted.
SQL> commit;
Commit complete.
SQL> --
SQL> select * from flashtest
2 order by col_id;
    COL_ID COL_TS          COL_TXT
         1 15:18:14.896167 r1 v1
         3 15:18:28.772038 r3 v1
2 rows selected.Now let's do a SELECT...VERSIONS and see what flashback knows about the row.
SQL> --
SQL> select col_id,
2         col_ts,
3         col_txt,
4         nvl(versions_startscn,0) START_SCN,
5         versions_endscn END_SCN,
6         versions_xid xid,
7         versions_operation operation
8 from flashtest
9 versions between scn minvalue and maxvalue
10 where col_id=2
11 order by col_id, start_scn;
    COL_ID COL_TS          COL_TXT     START_SCN    END_SCN XID              O
         2 15:18:21.841682 r2 v1               0    2802287
         2 15:18:35.929847 r2 v2         2802287    2802292 0200260082060000 U
         2 15:18:35.929847 r2 v2         2802292            0A002300A4060000 D
3 rows selected.
SQL> --And having seen the above, we can use a more selective form to provide the values for an INSERT statement to put the row back.
SQL> insert into flashtest
2     select col_id,
3            col_ts,
4            col_txt
5     from flashtest
6     versions between scn minvalue and maxvalue
7     where col_id=2
8       and versions_operation = 'D'
9 ;
1 row created.
SQL> --
SQL> select * from flashtest
2 order by col_id;
    COL_ID COL_TS          COL_TXT
         1 15:18:14.896167 r1 v1
         2 15:18:35.929847 r2 v2
         3 15:18:28.772038 r3 v1
3 rows selected.
SQL>One could also query FLASHBACK_TRANSACTION_QUERY to get the actual DML needed to UNDO an operation on a single table.

Fireworks 2004 Corrupt file please help

I've spent allot of hours on a particular png document. when
I came to open the file in Fireworks the next day, I go the dreaded
"Could not open the file Unknown file type" message. Huh! Please
help! really not wanting to re-create this file from scratch!.
I have also tried opening the file in other programs that can
open pngs (photoshop, illustrator, freehand etc ) with no avail.
win xp sp2

cylon wrote:
> I've spent allot of hours on a particular png document.
when I came to open the
> file the next day I go the dreaded "Could not open the
file Unknown file type"
> message. Please help! am gonna go nuts if I have to
re-create this. Have spent
> hours googling tools to repair corrupt files and tried
opening the file in
> every other program that can open pngs (photoshop,
illustrator, freehand etc )
> with no avail.
Try deleting the Fireworks Preferences.txt. That will restore
all
program defaults the next time you load FW. If that doesn't
do it, check
for missing or corrupted fonts.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

ITunes.exe - Corrupt File Please help!!!

Every time I plug my ipod into my computer iTunes will open, and in my task bar it will read iTunes.exe - Corrupt File. The File or Directory\iPod_control is corrupt and unreadable. Please run the Chkdsk utility. Every time I go to click on this it disapears, and it is impossible to restore because iTunes doesnt show it as being plugged in. What can I do? Any help is greatly appreciated.

See these.
What to do if iTunes displays a corrupt file message.
Da Gopha's corrupt file info.

Only one MP4 file corrupt? Please help!

Hi,
I'm dealing with a weird situation. With the recorder functionality on my Nokia N97 I have recorded 7 clips.
5 of them have an icon of a musical note.
1 has an icon of a filmstrip
And one has an icon of a question mark.
I have copied the files to my pc and all files play except for the one with the question mark.
Googling the internet I read an article about adjusting the headers with a hex editor. That didn't work for me.
The 'corrupted' file starts with
iÿNq"1\ÍÏ sÒn
q ŠÃØ»©£“_~‡çÆ‡
iN«Ig|ŽõUë!àúÉ
And a 'good' file start with:
....ftypmp42....
mp423gp4isom..Û%
mdat..V^@. ^"!!.
I've tried to chance the headers but with no luck. Also I've tried multiple players, converters, etc.
Unfortunately the backup contains also the 'corrupted' file
The file size is >8MB but it doesn't show the playtime.
Is there anyone who can help me out? Or maybe somebody who can fix the headers for me?
Thanks in advance!
Regards, Mitch

Might have had more replies posted in Video section .
Broken video all i can suggest is copy off phone and try to repair with VLC media player .
Or search one of the AV forums somebody with more AV knowledge may have the answer .
jje

Adobe audition cc crashes after a few times of recording(please help)

Okay so Adobe audition is incredibly useful or should i say WAS... It was great until one day it just crashed after a few times of recording. I just thought maybe something went wrong whatever ill re do it. But no.. for months ive been trying, uninstalling and reinstalling, updating, closing all other programs running but nothing has seemed to do it. Audition is really important to my music career and lately i havent been able to do anything because it doesnt work. Im begging, can someone PLEASE try to help me, im desperate.
heres a pic of what happens when it crashes:

I notice from the picture that you have four files in the middle of processing. Do you remember what they were doingwhen the crash happened? Were they saving or did you have some effects processing going on?
Also either Audition or Windows may have saved a crash report somewhere which could help to diagnose the problem. I am not sure where they may have been saved but others might remember where to look for them.

"DDE server window: itunes.exe - corrupt disk " please help!!!

i keep trying to oppen my itunes on my laptop (a dell inspiron with windows 7) and it keeps saying: "DDE server window: itunes.exe - corrupt disk "
also says "the folder "iTunes" is on a locked disk or you do not have write permissions for this folder"
i dont know anything about this kind of stuff i need detailled help please

hi Hung Tang!
hmmm. just to be on the safe side, please try searching for that file again, after having done this:
Open "My computer". go to the Tools menu. Select "folder options ..." click the "view" tab. Make sure "Show hidden files and folders" is checked and "Hide extensions for known file types" is unchecked, like so:
http://www.pixentral.com/show.php?pic=1yUGzJM0gRKQ8LtcizzwMSgXNb2u
If the QT file still isn't showing up then, and the fix from that QTfW thread is still impossible to apply, then I think that a
b clean
uninstall then reinstall (with freshly downloaded itunes and ipod software) would be prudent. we want to try to try to get rid of any corrupted files (in either your itunes or quicktime set-ups).
Da Gopha, "iTfW: stepwise clean uninstallation of iTunes", 09:51am Apr 5, 2005 CDT
It would also be prudent to back up your music prior to doing this. we aren't going to be doing anything that would normally affect them, but it's best not to tempt fate.
love, b

SOS problem using one Entity bean for editing records. please help me

Hello
I have one great problem using one entity bean 2.1 and i am working with this problem several days and i dont solve it.
i am using this jb 2.1 for add new records to one oracle database and for editing records.
I have one great problem for editing records
I have one objets that is as one of my database table. (PersonaObj.java)
     //personaObj.java
     public class PersonaObj implements Serializable{
          private Integer id_persona; //this ishte database table autonumeric
          private java.lang.String nombre;
          now the set/get methods.
     One field of this objets (bean) is the primary key of the table, and this field is one part of the pk from the entity bean.
     From one session bean i call the entity bena passing the objet
     into the entity bean (interface) i have one methods:
          public getPersona getT56aaat04();
     public void setPersona(PersonaObj obj);
     into the entitybean bean i have:
     public PersonaEntityPK ejbCreate(PersonaObj obj) throws CreateException {
          this.setT56aaat04(obj);
          public abstract Integer getId_persona();
     public abstract void setId_persona(Integer Id_persona);
     public abstract java.lang.String getNombre();
     public abstract void setNombre(java.lang.String Nombre);
     public PersonaObj getPersona() {
          PersonaObj obj = new PersonaObj();
          obj.setId_persona(getId_persona());
          obj.setNombre(getNombre());
          return obj;
     public void setPersona(PersonaObj obj) {
          setId_persona(obj.getId_persona());
          setNombre(obj.getNombre());
But i have one graet problem.
adding new record to the database i runs well but if i want to edit one recor appears this error:
=> Error <=
java.rmi.RemoteException: EJB Exception: ; nested exception is: javax.ejb.EJBException: EJB Exception: : java.lang.IllegalStateException:[EJB:010144]The setXXX method for a primary key field may only be called during ejbCreate.
at PersonasEJB_a43o8n__WebLogic_CMP_RDBMS.setId_persona(PersonasEntityEJB_a43o8n__WebLogic_CMP_RDBMS.java:328)
at PersonasEntityBean.setPersona(PersonasEntityBean.java:114)
at PersonasEntityEJB_a43o8n_ELOImpl.setPersona(PersonasEntityEJB_a43o8n_ELOImpl.java:45)
at PersonasSessionBean.editarPersona(PersonasSessionBean.java:849)
at PersonasSessionBean_bszo9t_EOImpl.editarPersona(PersonasSessionBean_bszo9t_EOImpl.java:208)
at PersonasSessionBean_bszo9t_EOImpl_WLSkel.invoke(Unknown Source)
into the session bean i make this (the session recibes one PersonaObj obj):
T56aContactosEntityLocal personaLocal ;
               try {
                    personaLocal = personaHome.findByPrimaryKey(new T56aContactosEntityPK(obj.getId_a04()));
                    T56aaat04Obj objTmp = new T56aaat04Obj();
                    objTmp.setAp1_a04(obj.getAp1_a04());
                    objTmp.setEstado_a04("false");
                    personaLocal.setT56aaat04(obj);
Please can you help me to solve this problem?

Hello Werner,
The mappings seem to be alright at a first glance.
Have you tried out un- and redeploying your application? Sometimes values appear to be cached in the server. So if you have deployed the application before you entered DB_BANK as alias this might solve the problem...
BR
Daniel

Corrupted Layout PLease help?

Dear Mac friends,
I have a trouble - just bought Pages to write an application for an artist grant. When I make a PDF document from it, then the layout changes. It is like the complete document has become smaller in some way or another?
See a picture here: http://homepage.mac.com/steven_vrancken/pages/PhotoAlbum169.html
Left you see the layout as presented in pages, and right you see the corrupted layout in the PDF file.
How can I solve this please?
Can anyone help me out?
Thank you very much.

Yes thank you, funny, I checked the forum 5 minutes ago to see if my question was answered... nothing, so I started searching the forum, and I found your anwser to someone else... `this question comes at least once a week`... so you must have been writing your answer to my the same time I was reading your answer somewhere else on the forum
thanks.

Oracle:JDBC Call returns no results, SQL*Plus returns 1 record, Please help

Any help would be greatly appreciated.
Running 9.2.0.5.0, and using latest 9.2 JDBC 1.4_g drivers in thin mode.
Execute the following query from SQL*Plus and it returns one row, from JDBC using a PreparedStatement, I get no results. Here's the query, table def, record, etc.:
Query:
SELECT
ID_WEB_FRM,ID_WEB_SIT,CDE_LVL_1_FUNC,
CDE_LVL_2_FUNC,NUM_WEB_FUNC_PG,NUM_WEB_PG_ID
FROM
WEB_FRM
WHERE
ID_WEB_FRM = ' '
OR
(ID_WEB_SIT = 'test' AND CDE_LVL_1_FUNC = ' '
AND CDE_LVL_2_FUNC = 'u2T' AND NUM_WEB_FUNC_PG = 1
AND NUM_WEB_PG_ID = 0)
Record returned from SQL*Plus:
ID_WEB_FRM ID_WEB_SIT CDE CDE NUM_WEB_FUNC_PG NUM_WEB_PG_ID
NfRRmc5XZu test u2T 1 0
Both in the data returned and the query, there are no blanks, but they are a single space instead (hard to see in message here).
Java code:
int count = 1;
findDBNameStatement.setString(count++," ");
findDBNameStatement.setString(count++,form.getSiteID());
findDBNameStatement.setString(count++," ");
findDBNameStatement.setString(count++, form.getFunctionID());
findDBNameStatement.setInt(count++,form.getPageNumber());
findDBNameStatement.setInt(count++,form.getSectionNumber());
ResultSet resultSet = findDBNameStatement.executeQuery();
ResultSetMetaData metaData = resultSet.getMetaData();
resultSet.next() returns false
DB table:
CREATE TABLE web_frm (
ID_WEB_FRM varchar2(10) NOT NULL,
ID_WEB_SIT varchar2(20) NOT NULL,
NAM_WEB_FRM varchar2(40),
TXT_EMAIL_SUBJ varchar2(50),
CDE_LVL_1_FUNC char(3),
CDE_LVL_2_FUNC char(3) NOT NULL,
NUM_WEB_FUNC_PG int NOT NULL,
NUM_WEB_PG_ID smallint NOT NULL,
DTE_WEB_FRM_EFF date NOT NULL,
DTE_WEB_FRM_TRM date,
CDE_VLDT_RUL char(3),
DTE_LAST_EXPRT date,
TXT_CNFRMN_MSG varchar2(4000),
IND_UPDT_ALWD char(1) NOT NULL,
TXT_RECAP_HDR varchar2(4000),
TXT_RECAP_FTR varchar2(4000),
CDE_WEB_OBJ char(3),
NUM_MAX_FRM_WIDTH number(4,0),
IND_RECAP_PG char(1) NOT NULL,
IND_CNFRM_PG char(1) NOT NULL,
IND_DSPL_CNFRM_NUM char(1) NOT NULL,
CNT_SUBM_MAX int,
TXT_CHCE_ADD_MSG varchar2(255),
TXT_CHCE_MOD_MSG varchar2(255),
TXT_WEB_HDR varchar2(4000),
TXT_WEB_FTR varchar2(4000),
TXT_WAIT_LIST_MSG varchar2(255),
FORMOBJECTHEIGHT int NOT NULL,
FORMOBJECTWIDTH int NOT NULL
ALTER TABLE web_frm ADD ( CONSTRAINT PK_web_frm PRIMARY KEY (ID_WEB_FRM));
ALTER TABLE web_frm ADD ( CONSTRAINT UK_web_frm UNIQUE (ID_WEB_SIT,CDE_LVL_1_FUNC,CDE_LVL_2_FUNC,NUM_WEB_FUNC_PG,NUM_WEB_PG_ID)) ;
Thanks,
Matt

That's not quite right. From the javadocs:
next
public boolean next()
throws SQLException
Moves the cursor down one row from its current position. A ResultSet cursor is initially positioned before the first row; the first call to the method next makes the first row the current row; the second call makes the second row the current row, and so on.
If an input stream is open for the current row, a call to the method next will implicitly close it. A ResultSet object's warning chain is cleared when a new row is read.
Returns:
true if the new current row is valid; false if there are no more rows
Throws:
SQLException - if a database access error occurs

JDBC Call returns no results, SQL*Plus returns 1 record, Please help!

Any help would be greatly appreciated.
Running 9.2.0.5.0, and using latest 9.2 JDBC 1.4_g drivers in thin mode.
Execute the following query from SQL*Plus and it returns one row, from JDBC using a PreparedStatement, I get no results. Here's the query, table def, record, etc.:
Query:
SELECT
ID_WEB_FRM,ID_WEB_SIT,CDE_LVL_1_FUNC,
CDE_LVL_2_FUNC,NUM_WEB_FUNC_PG,NUM_WEB_PG_ID
FROM
WEB_FRM
WHERE
ID_WEB_FRM = ' '
OR
(ID_WEB_SIT = 'test' AND CDE_LVL_1_FUNC = ' '
AND CDE_LVL_2_FUNC = 'u2T' AND NUM_WEB_FUNC_PG = 1
AND NUM_WEB_PG_ID = 0)
Record returned from SQL*Plus:
ID_WEB_FRM ID_WEB_SIT CDE CDE NUM_WEB_FUNC_PG NUM_WEB_PG_ID
NfRRmc5XZu test u2T 1 0
Both in the data returned and the query, there are no blanks, but they are a single space instead (hard to see in message here).
Java code:
int count = 1;
findDBNameStatement.setString(count++," ");
findDBNameStatement.setString(count++,form.getSiteID());
findDBNameStatement.setString(count++," ");
findDBNameStatement.setString(count++, form.getFunctionID());
findDBNameStatement.setInt(count++,form.getPageNumber());
findDBNameStatement.setInt(count++,form.getSectionNumber());
ResultSet resultSet = findDBNameStatement.executeQuery();
ResultSetMetaData metaData = resultSet.getMetaData();
resultSet.next() returns false
DB table:
CREATE TABLE web_frm (
ID_WEB_FRM varchar2(10) NOT NULL,
ID_WEB_SIT varchar2(20) NOT NULL,
NAM_WEB_FRM varchar2(40),
TXT_EMAIL_SUBJ varchar2(50),
CDE_LVL_1_FUNC char(3),
CDE_LVL_2_FUNC char(3) NOT NULL,
NUM_WEB_FUNC_PG int NOT NULL,
NUM_WEB_PG_ID smallint NOT NULL,
DTE_WEB_FRM_EFF date NOT NULL,
DTE_WEB_FRM_TRM date,
CDE_VLDT_RUL char(3),
DTE_LAST_EXPRT date,
TXT_CNFRMN_MSG varchar2(4000),
IND_UPDT_ALWD char(1) NOT NULL,
TXT_RECAP_HDR varchar2(4000),
TXT_RECAP_FTR varchar2(4000),
CDE_WEB_OBJ char(3),
NUM_MAX_FRM_WIDTH number(4,0),
IND_RECAP_PG char(1) NOT NULL,
IND_CNFRM_PG char(1) NOT NULL,
IND_DSPL_CNFRM_NUM char(1) NOT NULL,
CNT_SUBM_MAX int,
TXT_CHCE_ADD_MSG varchar2(255),
TXT_CHCE_MOD_MSG varchar2(255),
TXT_WEB_HDR varchar2(4000),
TXT_WEB_FTR varchar2(4000),
TXT_WAIT_LIST_MSG varchar2(255),
FORMOBJECTHEIGHT int NOT NULL,
FORMOBJECTWIDTH int NOT NULL
ALTER TABLE web_frm ADD ( CONSTRAINT PK_web_frm PRIMARY KEY (ID_WEB_FRM));
ALTER TABLE web_frm ADD ( CONSTRAINT UK_web_frm UNIQUE (ID_WEB_SIT,CDE_LVL_1_FUNC,CDE_LVL_2_FUNC,NUM_WEB_FUNC_PG,NUM_WEB_PG_ID)) ;
Thanks,
Matt

I have verified the parameters and such, and if I run as a Statement instead of a PreparedStatement, the query works fine. After some more troubleshooting, I narrowed the problem down, but not sure of the fix.
If I eliminate teh extra parameters and simplify things to:
SELECT ID_WEB_FRM FROM WEB_FRM WHERE ID_WEB_SIT = 'test' AND CDE_LVL_2_FUNC = 'u2T' AND NUM_WEB_FUNC_PG = 1 AND NUM_WEB_PG_ID = 0
The code works. But if I add the additional WHERE clause of CDE_LVL_1_FUNC = ' ' (has single space), it returns no data (record in the DB has single space in this new column. Query that does not work:
SELECT ID_WEB_FRM FROM WEB_FRM WHERE ID_WEB_SIT = 'test' AND CDE_LVL_1_FUNC = ' ' AND CDE_LVL_2_FUNC = 'u2T' AND NUM_WEB_FUNC_PG = 1 AND NUM_WEB_PG_ID = 0
It appears the JDBC Driver is trimming the parameter when it is a space when set through a PreparedStatement.setString(2," ")

Updater freezes. Shuffle corrupted. Please help.

Before I get started I'll try to be clear on a few things.
UPDATER VERSION IS IRRELEVANT. I've tried with three different versions.
ITUNES VERSION IS IRRELEVANT. This is unrelated to itunes.
Short story: Program problem disallowed safe shuffle removal. It was corrupted as a result. I can't restore the ipod because the updater freezes up.
Longer story: Because of program I tried to run off my shuffle and my schools computer setup, things got messed up and when I tried to eject it it wouldn't let me. So I removed it manually. The shuffle got corrupted and was unreadable.
Seemed like a minor problem since I could easily restore the Ipod. I knew I had lost my files but that wasn't too bad. However the updaters all freeze when the ipod is plugged in or if they start while it's plugged in.
Now instead of just getting an error message when I try to do anything with my ipod the computer seems to be treating it as though it were an empty cd drive or something.
I doubt I can fix things. If I can't can anyone direct me to a replacement form and tell me if I've somehow voided the warranty?

I fixed it myself. The restorer was freezing up but apprently there is a third party one.
http://www.ilounge.com/index.php/ipod-software-windows/comments/anapod-reinitial izer-100/
It works great. it may help those of you who can't get the updater to recognize your ipod.

Corrupt recording. Please HELP [$]

Similar Messages

Maybe you are looking for